summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc512x
diff options
context:
space:
mode:
authorAnatolij Gustschin <agust@denx.de>2013-02-08 00:03:48 +0000
committerWolfgang Denk <wd@denx.de>2013-03-09 08:22:57 +0100
commitfcc7fe425183f9ec95fba33d041eb359d0a3a598 (patch)
treee646b10899c31a6e914d3c7172f24b8c697f180a /arch/powerpc/cpu/mpc512x
parent5643709ede0acef5c52669618ea36c33f84e9247 (diff)
downloadu-boot-imx-fcc7fe425183f9ec95fba33d041eb359d0a3a598.zip
u-boot-imx-fcc7fe425183f9ec95fba33d041eb359d0a3a598.tar.gz
u-boot-imx-fcc7fe425183f9ec95fba33d041eb359d0a3a598.tar.bz2
mpc512x: add ifm ac14xx board
Add new mpc5121e based ac14xx board and a new pinmux config function for setting individual pinmux bit groups. This function is used in ac14xx board code. Signed-off-by: Anatolij Gustschin <agust@denx.de>
Diffstat (limited to 'arch/powerpc/cpu/mpc512x')
-rw-r--r--arch/powerpc/cpu/mpc512x/iopin.c54
1 files changed, 54 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc512x/iopin.c b/arch/powerpc/cpu/mpc512x/iopin.c
index be20947..1a39101 100644
--- a/arch/powerpc/cpu/mpc512x/iopin.c
+++ b/arch/powerpc/cpu/mpc512x/iopin.c
@@ -47,3 +47,57 @@ void iopin_initialize(iopin_t *ioregs_init, int len)
}
return;
}
+
+void iopin_initialize_bits(iopin_t *ioregs_init, int len)
+{
+ short i, j, p;
+ u32 *reg, mask;
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ reg = (u32 *)&(im->io_ctrl);
+
+ /* iterate over table entries */
+ for (i = 0; i < len; i++) {
+ /* iterate over pins within a table entry */
+ for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+ p < ioregs_init[i].nr_pins; p++, j++) {
+ if (ioregs_init[i].bit_or & IO_PIN_OVER_EACH) {
+ /* replace all settings at once */
+ out_be32(reg + j, ioregs_init[i].val);
+ } else {
+ /*
+ * only replace individual parts, but
+ * REPLACE them instead of just ORing
+ * them in and "inheriting" previously
+ * set bits which we don't want
+ */
+ mask = 0;
+ if (ioregs_init[i].bit_or & IO_PIN_OVER_FMUX)
+ mask |= IO_PIN_FMUX(3);
+
+ if (ioregs_init[i].bit_or & IO_PIN_OVER_HOLD)
+ mask |= IO_PIN_HOLD(3);
+
+ if (ioregs_init[i].bit_or & IO_PIN_OVER_PULL)
+ mask |= IO_PIN_PUD(1) | IO_PIN_PUE(1);
+
+ if (ioregs_init[i].bit_or & IO_PIN_OVER_STRIG)
+ mask |= IO_PIN_ST(1);
+
+ if (ioregs_init[i].bit_or & IO_PIN_OVER_DRVSTR)
+ mask |= IO_PIN_DS(3);
+ /*
+ * DON'T do the "mask, then insert"
+ * in place on the register, it may
+ * break access to external hardware
+ * (like boot ROMs) when configuring
+ * LPB related pins, while the code to
+ * configure the pin is read from this
+ * very address region
+ */
+ clrsetbits_be32(reg + j, mask,
+ ioregs_init[i].val & mask);
+ }
+ }
+ }
+}