summaryrefslogtreecommitdiff
path: root/arch/mips/cpu
diff options
context:
space:
mode:
authorDaniel Schwierzeck <daniel.schwierzeck@gmail.com>2014-04-10 00:39:28 +0200
committerDaniel Schwierzeck <daniel.schwierzeck@gmail.com>2014-04-20 13:16:43 +0200
commit538cf92c8c2e8ea7f78c87b5bfb2f705b4b02fa8 (patch)
treeeaca9b55842f02c81f8d785cf5fe2ea26e8f0a20 /arch/mips/cpu
parent5f978d7efe7b68d8b9f127a8dfb8eaa999126485 (diff)
downloadu-boot-imx-538cf92c8c2e8ea7f78c87b5bfb2f705b4b02fa8.zip
u-boot-imx-538cf92c8c2e8ea7f78c87b5bfb2f705b4b02fa8.tar.gz
u-boot-imx-538cf92c8c2e8ea7f78c87b5bfb2f705b4b02fa8.tar.bz2
MIPS: drop incaip board
This is dead hardware and no one is interested in making the necessary changes for upcoming features like generic board or driver model. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'arch/mips/cpu')
-rw-r--r--arch/mips/cpu/mips32/incaip/Makefile9
-rw-r--r--arch/mips/cpu/mips32/incaip/asc_serial.c300
-rw-r--r--arch/mips/cpu/mips32/incaip/asc_serial.h177
-rw-r--r--arch/mips/cpu/mips32/incaip/config.mk8
-rw-r--r--arch/mips/cpu/mips32/incaip/incaip_clock.c100
-rw-r--r--arch/mips/cpu/mips32/incaip/incaip_wdt.S55
6 files changed, 0 insertions, 649 deletions
diff --git a/arch/mips/cpu/mips32/incaip/Makefile b/arch/mips/cpu/mips32/incaip/Makefile
deleted file mode 100644
index 7341a4a..0000000
--- a/arch/mips/cpu/mips32/incaip/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2011
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = incaip_wdt.o
-obj-y += incaip_clock.o asc_serial.o
diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c
deleted file mode 100644
index 6f0e4f2..0000000
--- a/arch/mips/cpu/mips32/incaip/asc_serial.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * (INCA) ASC UART support
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/inca-ip.h>
-#include <serial.h>
-#include <linux/compiler.h>
-#include "asc_serial.h"
-
-
-#define SET_BIT(reg, mask) reg |= (mask)
-#define CLEAR_BIT(reg, mask) reg &= (~mask)
-#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask) SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
-
-extern uint incaip_get_fpiclk(void);
-
-static int serial_setopt (void);
-
-/* pointer to ASC register base address */
-static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
-
-/******************************************************************************
-*
-* serial_init - initialize a INCAASC channel
-*
-* This routine initializes the number of data bits, parity
-* and set the selected baud rate. Interrupts are disabled.
-* Set the modem control signals if the option is selected.
-*
-* RETURNS: N/A
-*/
-
-static int asc_serial_init(void)
-{
- /* we have to set PMU.EN13 bit to enable an ASC device*/
- INCAASC_PMU_ENABLE(13);
-
- /* and we have to set CLC register*/
- CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
- SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
-
- /* initialy we are in async mode */
- pAsc->asc_con = ASCCON_M_8ASYNC;
-
- /* select input port */
- pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
-
- /* TXFIFO's filling level */
- SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
- ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
- /* enable TXFIFO */
- SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN);
-
- /* RXFIFO's filling level */
- SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK,
- ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
- /* enable RXFIFO */
- SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
-
- /* enable error signals */
- SET_BIT(pAsc->asc_con, ASCCON_FEN);
- SET_BIT(pAsc->asc_con, ASCCON_OEN);
-
- /* acknowledge ASC interrupts */
- ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
-
- /* disable ASC interrupts */
- ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
-
- /* set FIFOs into the transparent mode */
- SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
- SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
-
- /* set baud rate */
- serial_setbrg();
-
- /* set the options */
- serial_setopt();
-
- return 0;
-}
-
-static void asc_serial_setbrg(void)
-{
- ulong uiReloadValue, fdv;
- ulong f_ASC;
-
- f_ASC = incaip_get_fpiclk();
-
-#ifndef INCAASC_USE_FDV
- fdv = 2;
- uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
-#else
- fdv = INCAASC_FDV_HIGH_BAUDRATE;
- uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
-#endif /* INCAASC_USE_FDV */
-
- if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
- {
-#ifndef INCAASC_USE_FDV
- fdv = 3;
- uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
-#else
- fdv = INCAASC_FDV_LOW_BAUDRATE;
- uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
-#endif /* INCAASC_USE_FDV */
-
- if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
- {
- return; /* can't impossibly generate that baud rate */
- }
- }
-
- /* Disable Baud Rate Generator; BG should only be written when R=0 */
- CLEAR_BIT(pAsc->asc_con, ASCCON_R);
-
-#ifndef INCAASC_USE_FDV
- /*
- * Disable Fractional Divider (FDE)
- * Divide clock by reload-value + constant (BRS)
- */
- /* FDE = 0 */
- CLEAR_BIT(pAsc->asc_con, ASCCON_FDE);
-
- if ( fdv == 2 )
- CLEAR_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 0 */
- else
- SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */
-
-#else /* INCAASC_USE_FDV */
-
- /* Enable Fractional Divider */
- SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */
-
- /* Set fractional divider value */
- pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK;
-
-#endif /* INCAASC_USE_FDV */
-
- /* Set reload value in BG */
- pAsc->asc_bg = uiReloadValue;
-
- /* Enable Baud Rate Generator */
- SET_BIT(pAsc->asc_con, ASCCON_R); /* R = 1 */
-}
-
-/*******************************************************************************
-*
-* serial_setopt - set the serial options
-*
-* Set the channel operating mode to that specified. Following options
-* are supported: CREAD, CSIZE, PARENB, and PARODD.
-*
-* Note, this routine disables the transmitter. The calling routine
-* may have to re-enable it.
-*
-* RETURNS:
-* Returns 0 to indicate success, otherwise -1 is returned
-*/
-
-static int serial_setopt (void)
-{
- ulong con;
-
- switch ( ASC_OPTIONS & ASCOPT_CSIZE )
- {
- /* 7-bit-data */
- case ASCOPT_CS7:
- con = ASCCON_M_7ASYNCPAR; /* 7-bit-data and parity bit */
- break;
-
- /* 8-bit-data */
- case ASCOPT_CS8:
- if ( ASC_OPTIONS & ASCOPT_PARENB )
- con = ASCCON_M_8ASYNCPAR; /* 8-bit-data and parity bit */
- else
- con = ASCCON_M_8ASYNC; /* 8-bit-data no parity */
- break;
-
- /*
- * only 7 and 8-bit frames are supported
- * if we don't use IOCTL extensions
- */
- default:
- return -1;
- }
-
- if ( ASC_OPTIONS & ASCOPT_STOPB )
- SET_BIT(con, ASCCON_STP); /* 2 stop bits */
- else
- CLEAR_BIT(con, ASCCON_STP); /* 1 stop bit */
-
- if ( ASC_OPTIONS & ASCOPT_PARENB )
- SET_BIT(con, ASCCON_PEN); /* enable parity checking */
- else
- CLEAR_BIT(con, ASCCON_PEN); /* disable parity checking */
-
- if ( ASC_OPTIONS & ASCOPT_PARODD )
- SET_BIT(con, ASCCON_ODD); /* odd parity */
- else
- CLEAR_BIT(con, ASCCON_ODD); /* even parity */
-
- if ( ASC_OPTIONS & ASCOPT_CREAD )
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */
-
- pAsc->asc_con |= con;
-
- return 0;
-}
-
-static void asc_serial_putc(const char c)
-{
- uint txFl = 0;
-
- if (c == '\n') serial_putc ('\r');
-
- /* check do we have a free space in the TX FIFO */
- /* get current filling level */
- do
- {
- txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
- }
- while ( txFl == INCAASC_TXFIFO_FULL );
-
- pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
-
- /* check for errors */
- if ( pAsc->asc_con & ASCCON_OE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
- return;
- }
-}
-
-static int asc_serial_getc(void)
-{
- ulong symbol_mask;
- char c;
-
- while (!serial_tstc());
-
- symbol_mask =
- ((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff);
-
- c = (char)(pAsc->asc_rbuf & symbol_mask);
-
- return c;
-}
-
-static int asc_serial_tstc(void)
-{
- int res = 1;
-
- if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
- {
- res = 0;
- }
- else if ( pAsc->asc_con & ASCCON_FE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
- res = 0;
- }
- else if ( pAsc->asc_con & ASCCON_PE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE);
- res = 0;
- }
- else if ( pAsc->asc_con & ASCCON_OE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
- res = 0;
- }
-
- return res;
-}
-
-static struct serial_device asc_serial_drv = {
- .name = "asc_serial",
- .start = asc_serial_init,
- .stop = NULL,
- .setbrg = asc_serial_setbrg,
- .putc = asc_serial_putc,
- .puts = default_serial_puts,
- .getc = asc_serial_getc,
- .tstc = asc_serial_tstc,
-};
-
-void asc_serial_initialize(void)
-{
- serial_register(&asc_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &asc_serial_drv;
-}
diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.h b/arch/mips/cpu/mips32/incaip/asc_serial.h
deleted file mode 100644
index 7ffdcfa..0000000
--- a/arch/mips/cpu/mips32/incaip/asc_serial.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/* incaAscSio.h - (INCA) ASC UART tty driver header */
-
-#ifndef __INCincaAscSioh
-#define __INCincaAscSioh
-
-#include <asm/inca-ip.h>
-
-/* channel operating modes */
-#define ASCOPT_CSIZE 0x00000003
-#define ASCOPT_CS7 0x00000001
-#define ASCOPT_CS8 0x00000002
-#define ASCOPT_PARENB 0x00000004
-#define ASCOPT_STOPB 0x00000008
-#define ASCOPT_PARODD 0x00000010
-#define ASCOPT_CREAD 0x00000020
-
-#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
-
-/* ASC input select (0 or 1) */
-#define CONSOLE_TTY 0
-
-/* use fractional divider for baudrate settings */
-#define INCAASC_USE_FDV
-
-#ifdef INCAASC_USE_FDV
- #define INCAASC_FDV_LOW_BAUDRATE 71
- #define INCAASC_FDV_HIGH_BAUDRATE 453
-#endif /*INCAASC_USE_FDV*/
-
-
-#define INCAASC_TXFIFO_FL 1
-#define INCAASC_RXFIFO_FL 1
-#define INCAASC_TXFIFO_FULL 16
-
-/* interrupt lines masks for the ASC device interrupts*/
-/* change these macroses if it's necessary */
-#define INCAASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */
-
-#define INCAASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */
-#define INCAASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */
-#define INCAASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */
-#define INCAASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/
-
-/* interrupt controller access macros */
-#define ASC_INTERRUPTS_ENABLE(X) \
- *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X;
-#define ASC_INTERRUPTS_DISABLE(X) \
- *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X;
-#define ASC_INTERRUPTS_CLEAR(X) \
- *((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X;
-
-/* CLC register's bits and bitfields */
-#define ASCCLC_DISR 0x00000001
-#define ASCCLC_DISS 0x00000002
-#define ASCCLC_RMCMASK 0x0000FF00
-#define ASCCLC_RMCOFFSET 8
-
-/* CON register's bits and bitfields */
-#define ASCCON_MODEMASK 0x0007
- #define ASCCON_M_8SYNC 0x0
- #define ASCCON_M_8ASYNC 0x1
- #define ASCCON_M_8IRDAASYNC 0x2
- #define ASCCON_M_7ASYNCPAR 0x3
- #define ASCCON_M_9ASYNC 0x4
- #define ASCCON_M_8WAKEUPASYNC 0x5
- #define ASCCON_M_8ASYNCPAR 0x7
-#define ASCCON_STP 0x0008
-#define ASCCON_REN 0x0010
-#define ASCCON_PEN 0x0020
-#define ASCCON_FEN 0x0040
-#define ASCCON_OEN 0x0080
-#define ASCCON_PE 0x0100
-#define ASCCON_FE 0x0200
-#define ASCCON_OE 0x0400
-#define ASCCON_FDE 0x0800
-#define ASCCON_ODD 0x1000
-#define ASCCON_BRS 0x2000
-#define ASCCON_LB 0x4000
-#define ASCCON_R 0x8000
-
-/* WHBCON register's bits and bitfields */
-#define ASCWHBCON_CLRREN 0x0010
-#define ASCWHBCON_SETREN 0x0020
-#define ASCWHBCON_CLRPE 0x0100
-#define ASCWHBCON_CLRFE 0x0200
-#define ASCWHBCON_CLROE 0x0400
-#define ASCWHBCON_SETPE 0x0800
-#define ASCWHBCON_SETFE 0x1000
-#define ASCWHBCON_SETOE 0x2000
-
-/* ABCON register's bits and bitfields */
-#define ASCABCON_ABEN 0x0001
-#define ASCABCON_AUREN 0x0002
-#define ASCABCON_ABSTEN 0x0004
-#define ASCABCON_ABDETEN 0x0008
-#define ASCABCON_FCDETEN 0x0010
-#define ASCABCON_EMMASK 0x0300
- #define ASCABCON_EMOFF 8
- #define ASCABCON_EM_DISAB 0x0
- #define ASCABCON_EM_DURAB 0x1
- #define ASCABCON_EM_ALWAYS 0x2
-#define ASCABCON_TXINV 0x0400
-#define ASCABCON_RXINV 0x0800
-
-/* FDV register mask, offset and bitfields*/
-#define ASCFDV_VALUE_MASK 0x000001FF
-
-/* WHBABCON register's bits and bitfields */
-#define ASCWHBABCON_SETABEN 0x0001
-#define ASCWHBABCON_CLRABEN 0x0002
-
-/* ABSTAT register's bits and bitfields */
-#define ASCABSTAT_FCSDET 0x0001
-#define ASCABSTAT_FCCDET 0x0002
-#define ASCABSTAT_SCSDET 0x0004
-#define ASCABSTAT_SCCDET 0x0008
-#define ASCABSTAT_DETWAIT 0x0010
-
-/* WHBABSTAT register's bits and bitfields */
-#define ASCWHBABSTAT_CLRFCSDET 0x0001
-#define ASCWHBABSTAT_SETFCSDET 0x0002
-#define ASCWHBABSTAT_CLRFCCDET 0x0004
-#define ASCWHBABSTAT_SETFCCDET 0x0008
-#define ASCWHBABSTAT_CLRSCSDET 0x0010
-#define ASCWHBABSTAT_SETSCSDET 0x0020
-#define ASCWHBABSTAT_SETSCCDET 0x0040
-#define ASCWHBABSTAT_CLRSCCDET 0x0080
-#define ASCWHBABSTAT_CLRDETWAIT 0x0100
-#define ASCWHBABSTAT_SETDETWAIT 0x0200
-
-/* TXFCON register's bits and bitfields */
-#define ASCTXFCON_TXFEN 0x0001
-#define ASCTXFCON_TXFFLU 0x0002
-#define ASCTXFCON_TXTMEN 0x0004
-#define ASCTXFCON_TXFITLMASK 0x3F00
-#define ASCTXFCON_TXFITLOFF 8
-
-/* RXFCON register's bits and bitfields */
-#define ASCRXFCON_RXFEN 0x0001
-#define ASCRXFCON_RXFFLU 0x0002
-#define ASCRXFCON_RXTMEN 0x0004
-#define ASCRXFCON_RXFITLMASK 0x3F00
-#define ASCRXFCON_RXFITLOFF 8
-
-/* FSTAT register's bits and bitfields */
-#define ASCFSTAT_RXFFLMASK 0x003F
-#define ASCFSTAT_TXFFLMASK 0x3F00
-#define ASCFSTAT_TXFFLOFF 8
-
-#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT);
-
-typedef struct /* incaAsc_t */
-{
- volatile unsigned long asc_clc; /*0x0000*/
- volatile unsigned long asc_pisel; /*0x0004*/
- volatile unsigned long asc_rsvd1[2]; /* for mapping */ /*0x0008*/
- volatile unsigned long asc_con; /*0x0010*/
- volatile unsigned long asc_bg; /*0x0014*/
- volatile unsigned long asc_fdv; /*0x0018*/
- volatile unsigned long asc_pmw; /* not used */ /*0x001C*/
- volatile unsigned long asc_tbuf; /*0x0020*/
- volatile unsigned long asc_rbuf; /*0x0024*/
- volatile unsigned long asc_rsvd2[2]; /* for mapping */ /*0x0028*/
- volatile unsigned long asc_abcon; /*0x0030*/
- volatile unsigned long asc_abstat; /* not used */ /*0x0034*/
- volatile unsigned long asc_rsvd3[2]; /* for mapping */ /*0x0038*/
- volatile unsigned long asc_rxfcon; /*0x0040*/
- volatile unsigned long asc_txfcon; /*0x0044*/
- volatile unsigned long asc_fstat; /*0x0048*/
- volatile unsigned long asc_rsvd4; /* for mapping */ /*0x004C*/
- volatile unsigned long asc_whbcon; /*0x0050*/
- volatile unsigned long asc_whbabcon; /*0x0054*/
- volatile unsigned long asc_whbabstat; /* not used */ /*0x0058*/
-
-} incaAsc_t;
-
-#endif /* __INCincaAscSioh */
diff --git a/arch/mips/cpu/mips32/incaip/config.mk b/arch/mips/cpu/mips32/incaip/config.mk
deleted file mode 100644
index 5c89129..0000000
--- a/arch/mips/cpu/mips32/incaip/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2011
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mtune=4kc
diff --git a/arch/mips/cpu/mips32/incaip/incaip_clock.c b/arch/mips/cpu/mips32/incaip/incaip_clock.c
deleted file mode 100644
index efada9f..0000000
--- a/arch/mips/cpu/mips32/incaip/incaip_clock.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/inca-ip.h>
-
-
-/*******************************************************************************
-*
-* get_cpuclk - returns the frequency of the CPU.
-*
-* Gets the value directly from the INCA-IP hardware.
-*
-* RETURNS:
-* 150.000.000 for 150 MHz
-* 133.333.333 for 133 MHz (= 400MHz/3)
-* 100.000.000 for 100 MHz (= 400MHz/4)
-* NOTE:
-* This functions should be used by the hardware driver to get the correct
-* frequency of the CPU. Don't use the macros, which are set to init the CPU
-* frequency in the ROM code.
-*/
-uint incaip_get_cpuclk (void)
-{
- /*-------------------------------------------------------------------------*/
- /* CPU Clock Input Multiplexer (MUX I) */
- /* Multiplexer MUX I selects the maximum input clock to the CPU. */
- /*-------------------------------------------------------------------------*/
- if (*((volatile ulong *) INCA_IP_CGU_CGU_MUXCR) &
- INCA_IP_CGU_CGU_MUXCR_MUXI) {
- /* MUX I set to 150 MHz clock */
- return 150000000;
- } else {
- /* MUX I set to 100/133 MHz clock */
- if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) {
- /* Division value is 1/3, maximum CPU operating */
- /* frequency is 133.3 MHz */
- return 133333333;
- } else {
- /* Division value is 1/4, maximum CPU operating */
- /* frequency is 100 MHz */
- return 100000000;
- }
- }
-}
-
-/*******************************************************************************
-*
-* get_fpiclk - returns the frequency of the FPI bus.
-*
-* Gets the value directly from the INCA-IP hardware.
-*
-* RETURNS: Frquency in Hz
-*
-* NOTE:
-* This functions should be used by the hardware driver to get the correct
-* frequency of the CPU. Don't use the macros, which are set to init the CPU
-* frequency in the ROM code.
-* The calculation for the
-*/
-uint incaip_get_fpiclk (void)
-{
- uint clkCPU;
-
- clkCPU = incaip_get_cpuclk ();
-
- switch (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0xC) {
- case 0x4:
- return clkCPU >> 1; /* devided by 2 */
- break;
- case 0x8:
- return clkCPU >> 2; /* devided by 4 */
- break;
- default:
- return clkCPU;
- break;
- }
-}
-
-int incaip_set_cpuclk (void)
-{
- extern void ebu_init(long);
- extern void cgu_init(long);
- extern void sdram_init(long);
- char tmp[64];
- ulong cpuclk;
-
- if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) {
- cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
- cgu_init (cpuclk);
- ebu_init (cpuclk);
- sdram_init (cpuclk);
- }
-
- return 0;
-}
diff --git a/arch/mips/cpu/mips32/incaip/incaip_wdt.S b/arch/mips/cpu/mips32/incaip/incaip_wdt.S
deleted file mode 100644
index b15320a..0000000
--- a/arch/mips/cpu/mips32/incaip/incaip_wdt.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * INCA-IP Watchdog timer management code.
- *
- * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <config.h>
-#include <asm/regdef.h>
-
-
-#define WD_BASE 0xb8000000
-#define WD_CON0(value) 0x0020(value)
-#define WD_CON1(value) 0x0024(value)
-#define WD_DISABLE 0x00000008
-#define WD_ENABLE 0x00000000
-#define WD_WRITE_PW 0xFFFC00F8
-#define WD_WRITE_ENDINIT 0xFFFC00F3
-#define WD_WRITE_INIT 0xFFFC00F2
-
-
- .globl disable_incaip_wdt
-disable_incaip_wdt:
- li t0, WD_BASE
-
- /* Calculate password.
- */
- lw t2, WD_CON1(t0)
- and t2, 0xC
-
- lw t3, WD_CON0(t0)
- and t3, 0xFFFFFF01
-
- or t3, t2
- or t3, 0xF0
-
- sw t3, WD_CON0(t0) /* write password */
-
- /* Clear ENDINIT.
- */
- li t1, WD_WRITE_INIT
- sw t1, WD_CON0(t0)
-
-
- li t1, WD_DISABLE
- sw t1, WD_CON1(t0) /* disable watchdog */
- li t1, WD_WRITE_PW
- sw t1, WD_CON0(t0) /* write password */
- li t1, WD_WRITE_ENDINIT
- sw t1, WD_CON0(t0) /* end command */
-
- jr ra
- nop