MIPS: drop incaip board

This is dead hardware and no one is interested in making the
necessary changes for upcoming features like generic board or
driver model.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>

6 files changed, 0 insertions, 649 deletions

diff --git a/arch/mips/cpu/mips32/incaip/Makefile b/arch/mips/cpu/mips32/incaip/Makefile
deleted file mode 100644
index 7341a4a..0000000
--- a/arch/mips/cpu/mips32/incaip/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2011
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= incaip_wdt.o
-obj-y	+= incaip_clock.o asc_serial.o
diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c
deleted file mode 100644
index 6f0e4f2..0000000
--- a/arch/mips/cpu/mips32/incaip/asc_serial.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * (INCA) ASC UART support
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/inca-ip.h>
-#include <serial.h>
-#include <linux/compiler.h>
-#include "asc_serial.h"
-
-
-#define SET_BIT(reg, mask)                  reg |= (mask)
-#define CLEAR_BIT(reg, mask)                reg &= (~mask)
-#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
-
-extern uint incaip_get_fpiclk(void);
-
-static int serial_setopt (void);
-
-/* pointer to ASC register base address */
-static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
-
-/******************************************************************************
-*
-* serial_init - initialize a INCAASC channel
-*
-* This routine initializes the number of data bits, parity
-* and set the selected baud rate. Interrupts are disabled.
-* Set the modem control signals if the option is selected.
-*
-* RETURNS: N/A
-*/
-
-static int asc_serial_init(void)
-{
-    /* we have to set PMU.EN13 bit to enable an ASC device*/
-    INCAASC_PMU_ENABLE(13);
-
-    /* and we have to set CLC register*/
-    CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
-    SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
-
-    /* initialy we are in async mode */
-    pAsc->asc_con = ASCCON_M_8ASYNC;
-
-    /* select input port */
-    pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
-
-    /* TXFIFO's filling level */
-    SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
-		    ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
-    /* enable TXFIFO */
-    SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN);
-
-    /* RXFIFO's filling level */
-    SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK,
-		    ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
-    /* enable RXFIFO */
-    SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
-
-    /* enable error signals */
-    SET_BIT(pAsc->asc_con, ASCCON_FEN);
-    SET_BIT(pAsc->asc_con, ASCCON_OEN);
-
-    /* acknowledge ASC interrupts */
-    ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
-
-    /* disable ASC interrupts */
-    ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
-
-    /* set FIFOs into the transparent mode */
-    SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
-    SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
-
-    /* set baud rate */
-    serial_setbrg();
-
-    /* set the options */
-    serial_setopt();
-
-    return 0;
-}
-
-static void asc_serial_setbrg(void)
-{
-    ulong      uiReloadValue, fdv;
-    ulong      f_ASC;
-
-    f_ASC = incaip_get_fpiclk();
-
-#ifndef INCAASC_USE_FDV
-    fdv = 2;
-    uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
-#else
-    fdv = INCAASC_FDV_HIGH_BAUDRATE;
-    uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
-#endif /* INCAASC_USE_FDV */
-
-    if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
-    {
-#ifndef INCAASC_USE_FDV
-	fdv = 3;
-	uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
-#else
-	fdv = INCAASC_FDV_LOW_BAUDRATE;
-	uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
-#endif /* INCAASC_USE_FDV */
-
-	if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
-	{
-	    return;    /* can't impossibly generate that baud rate */
-	}
-    }
-
-    /* Disable Baud Rate Generator; BG should only be written when R=0 */
-    CLEAR_BIT(pAsc->asc_con, ASCCON_R);
-
-#ifndef INCAASC_USE_FDV
-    /*
-     * Disable Fractional Divider (FDE)
-     * Divide clock by reload-value + constant (BRS)
-     */
-    /* FDE = 0 */
-    CLEAR_BIT(pAsc->asc_con, ASCCON_FDE);
-
-    if ( fdv == 2 )
-	CLEAR_BIT(pAsc->asc_con, ASCCON_BRS);   /* BRS = 0 */
-    else
-	SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */
-
-#else /* INCAASC_USE_FDV */
-
-    /* Enable Fractional Divider */
-    SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */
-
-    /* Set fractional divider value */
-    pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK;
-
-#endif /* INCAASC_USE_FDV */
-
-    /* Set reload value in BG */
-    pAsc->asc_bg = uiReloadValue;
-
-    /* Enable Baud Rate Generator */
-    SET_BIT(pAsc->asc_con, ASCCON_R);           /* R = 1 */
-}
-
-/*******************************************************************************
-*
-* serial_setopt - set the serial options
-*
-* Set the channel operating mode to that specified. Following options
-* are supported: CREAD, CSIZE, PARENB, and PARODD.
-*
-* Note, this routine disables the transmitter.  The calling routine
-* may have to re-enable it.
-*
-* RETURNS:
-* Returns 0 to indicate success, otherwise -1 is returned
-*/
-
-static int serial_setopt (void)
-{
-    ulong  con;
-
-    switch ( ASC_OPTIONS & ASCOPT_CSIZE )
-    {
-    /* 7-bit-data */
-    case ASCOPT_CS7:
-	con = ASCCON_M_7ASYNCPAR;   /* 7-bit-data and parity bit */
-	break;
-
-    /* 8-bit-data */
-    case ASCOPT_CS8:
-	if ( ASC_OPTIONS & ASCOPT_PARENB )
-	    con = ASCCON_M_8ASYNCPAR;   /* 8-bit-data and parity bit */
-	else
-	    con = ASCCON_M_8ASYNC;      /* 8-bit-data no parity */
-	break;
-
-    /*
-     *  only 7 and 8-bit frames are supported
-     *  if we don't use IOCTL extensions
-     */
-    default:
-	return -1;
-    }
-
-    if ( ASC_OPTIONS & ASCOPT_STOPB )
-	SET_BIT(con, ASCCON_STP);       /* 2 stop bits */
-    else
-	CLEAR_BIT(con, ASCCON_STP);     /* 1 stop bit */
-
-    if ( ASC_OPTIONS & ASCOPT_PARENB )
-	SET_BIT(con, ASCCON_PEN);           /* enable parity checking */
-    else
-	CLEAR_BIT(con, ASCCON_PEN);         /* disable parity checking */
-
-    if ( ASC_OPTIONS & ASCOPT_PARODD )
-	SET_BIT(con, ASCCON_ODD);       /* odd parity */
-    else
-	CLEAR_BIT(con, ASCCON_ODD);     /* even parity */
-
-    if ( ASC_OPTIONS & ASCOPT_CREAD )
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */
-
-    pAsc->asc_con |= con;
-
-    return 0;
-}
-
-static void asc_serial_putc(const char c)
-{
-    uint txFl = 0;
-
-    if (c == '\n') serial_putc ('\r');
-
-    /* check do we have a free space in the TX FIFO */
-    /* get current filling level */
-    do
-    {
-	txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
-    }
-    while ( txFl == INCAASC_TXFIFO_FULL );
-
-    pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
-
-    /* check for errors */
-    if ( pAsc->asc_con & ASCCON_OE )
-    {
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
-	return;
-    }
-}
-
-static int asc_serial_getc(void)
-{
-    ulong symbol_mask;
-    char c;
-
-    while (!serial_tstc());
-
-    symbol_mask =
-	((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff);
-
-    c = (char)(pAsc->asc_rbuf & symbol_mask);
-
-    return c;
-}
-
-static int asc_serial_tstc(void)
-{
-    int res = 1;
-
-    if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
-    {
-	res = 0;
-    }
-    else if ( pAsc->asc_con & ASCCON_FE )
-    {
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
-	res = 0;
-    }
-    else if ( pAsc->asc_con & ASCCON_PE )
-    {
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE);
-	res = 0;
-    }
-    else if ( pAsc->asc_con & ASCCON_OE )
-    {
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
-	res = 0;
-    }
-
-    return res;
-}
-
-static struct serial_device asc_serial_drv = {
-	.name	= "asc_serial",
-	.start	= asc_serial_init,
-	.stop	= NULL,
-	.setbrg	= asc_serial_setbrg,
-	.putc	= asc_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= asc_serial_getc,
-	.tstc	= asc_serial_tstc,
-};
-
-void asc_serial_initialize(void)
-{
-	serial_register(&asc_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &asc_serial_drv;
-}
diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.h b/arch/mips/cpu/mips32/incaip/asc_serial.h
deleted file mode 100644
index 7ffdcfa..0000000
--- a/arch/mips/cpu/mips32/incaip/asc_serial.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/* incaAscSio.h - (INCA) ASC UART tty driver header */
-
-#ifndef __INCincaAscSioh
-#define __INCincaAscSioh
-
-#include <asm/inca-ip.h>
-
-/* channel operating modes */
-#define	ASCOPT_CSIZE	0x00000003
-#define	ASCOPT_CS7	0x00000001
-#define	ASCOPT_CS8	0x00000002
-#define	ASCOPT_PARENB	0x00000004
-#define	ASCOPT_STOPB	0x00000008
-#define	ASCOPT_PARODD	0x00000010
-#define	ASCOPT_CREAD	0x00000020
-
-#define ASC_OPTIONS		(ASCOPT_CREAD | ASCOPT_CS8)
-
-/* ASC input select (0 or 1) */
-#define CONSOLE_TTY	0
-
-/* use fractional divider for baudrate settings */
-#define INCAASC_USE_FDV
-
-#ifdef INCAASC_USE_FDV
-   #define INCAASC_FDV_LOW_BAUDRATE        71
-   #define INCAASC_FDV_HIGH_BAUDRATE       453
-#endif /*INCAASC_USE_FDV*/
-
-
-#define INCAASC_TXFIFO_FL       1
-#define INCAASC_RXFIFO_FL       1
-#define INCAASC_TXFIFO_FULL     16
-
-/* interrupt lines masks for the ASC device interrupts*/
-/* change these macroses if it's necessary */
-#define INCAASC_IRQ_LINE_ALL        0x000F0000  /* all IRQs */
-
-#define INCAASC_IRQ_LINE_TIR            0x00010000      /* TIR - Tx */
-#define INCAASC_IRQ_LINE_RIR            0x00020000      /* RIR - Rx */
-#define INCAASC_IRQ_LINE_EIR            0x00040000      /* EIR - Err */
-#define INCAASC_IRQ_LINE_TBIR           0x00080000      /* TBIR - Tx Buf*/
-
-/* interrupt controller access macros */
-#define ASC_INTERRUPTS_ENABLE(X)  \
-   *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X;
-#define ASC_INTERRUPTS_DISABLE(X) \
-   *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X;
-#define ASC_INTERRUPTS_CLEAR(X)   \
-   *((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X;
-
-/* CLC register's bits and bitfields */
-#define ASCCLC_DISR        0x00000001
-#define ASCCLC_DISS        0x00000002
-#define ASCCLC_RMCMASK     0x0000FF00
-#define ASCCLC_RMCOFFSET   8
-
-/* CON register's bits and bitfields */
-#define ASCCON_MODEMASK 0x0007
-    #define ASCCON_M_8SYNC          0x0
-    #define ASCCON_M_8ASYNC         0x1
-    #define ASCCON_M_8IRDAASYNC     0x2
-    #define ASCCON_M_7ASYNCPAR      0x3
-    #define ASCCON_M_9ASYNC         0x4
-    #define ASCCON_M_8WAKEUPASYNC   0x5
-    #define ASCCON_M_8ASYNCPAR      0x7
-#define ASCCON_STP      0x0008
-#define ASCCON_REN      0x0010
-#define ASCCON_PEN      0x0020
-#define ASCCON_FEN      0x0040
-#define ASCCON_OEN      0x0080
-#define ASCCON_PE       0x0100
-#define ASCCON_FE       0x0200
-#define ASCCON_OE       0x0400
-#define ASCCON_FDE      0x0800
-#define ASCCON_ODD      0x1000
-#define ASCCON_BRS      0x2000
-#define ASCCON_LB       0x4000
-#define ASCCON_R        0x8000
-
-/* WHBCON register's bits and bitfields */
-#define ASCWHBCON_CLRREN    0x0010
-#define ASCWHBCON_SETREN    0x0020
-#define ASCWHBCON_CLRPE     0x0100
-#define ASCWHBCON_CLRFE     0x0200
-#define ASCWHBCON_CLROE     0x0400
-#define ASCWHBCON_SETPE     0x0800
-#define ASCWHBCON_SETFE     0x1000
-#define ASCWHBCON_SETOE     0x2000
-
-/* ABCON register's bits and bitfields */
-#define ASCABCON_ABEN       0x0001
-#define ASCABCON_AUREN      0x0002
-#define ASCABCON_ABSTEN     0x0004
-#define ASCABCON_ABDETEN    0x0008
-#define ASCABCON_FCDETEN    0x0010
-#define ASCABCON_EMMASK     0x0300
-    #define ASCABCON_EMOFF          8
-	#define ASCABCON_EM_DISAB       0x0
-	#define ASCABCON_EM_DURAB       0x1
-	#define ASCABCON_EM_ALWAYS      0x2
-#define ASCABCON_TXINV      0x0400
-#define ASCABCON_RXINV      0x0800
-
-/* FDV register mask, offset and bitfields*/
-#define ASCFDV_VALUE_MASK     0x000001FF
-
-/* WHBABCON register's bits and bitfields */
-#define ASCWHBABCON_SETABEN     0x0001
-#define ASCWHBABCON_CLRABEN     0x0002
-
-/* ABSTAT register's bits and bitfields */
-#define ASCABSTAT_FCSDET    0x0001
-#define ASCABSTAT_FCCDET    0x0002
-#define ASCABSTAT_SCSDET    0x0004
-#define ASCABSTAT_SCCDET    0x0008
-#define ASCABSTAT_DETWAIT   0x0010
-
-/* WHBABSTAT register's bits and bitfields */
-#define ASCWHBABSTAT_CLRFCSDET  0x0001
-#define ASCWHBABSTAT_SETFCSDET  0x0002
-#define ASCWHBABSTAT_CLRFCCDET  0x0004
-#define ASCWHBABSTAT_SETFCCDET  0x0008
-#define ASCWHBABSTAT_CLRSCSDET  0x0010
-#define ASCWHBABSTAT_SETSCSDET  0x0020
-#define ASCWHBABSTAT_SETSCCDET  0x0040
-#define ASCWHBABSTAT_CLRSCCDET  0x0080
-#define ASCWHBABSTAT_CLRDETWAIT 0x0100
-#define ASCWHBABSTAT_SETDETWAIT 0x0200
-
-/* TXFCON register's bits and bitfields */
-#define ASCTXFCON_TXFEN         0x0001
-#define ASCTXFCON_TXFFLU        0x0002
-#define ASCTXFCON_TXTMEN        0x0004
-#define ASCTXFCON_TXFITLMASK    0x3F00
-#define ASCTXFCON_TXFITLOFF     8
-
-/* RXFCON register's bits and bitfields */
-#define ASCRXFCON_RXFEN         0x0001
-#define ASCRXFCON_RXFFLU        0x0002
-#define ASCRXFCON_RXTMEN        0x0004
-#define ASCRXFCON_RXFITLMASK    0x3F00
-#define ASCRXFCON_RXFITLOFF     8
-
-/* FSTAT register's bits and bitfields */
-#define ASCFSTAT_RXFFLMASK      0x003F
-#define ASCFSTAT_TXFFLMASK      0x3F00
-#define ASCFSTAT_TXFFLOFF       8
-
-#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT);
-
-typedef  struct         /* incaAsc_t */
-{
-    volatile unsigned long  asc_clc;                            /*0x0000*/
-    volatile unsigned long  asc_pisel;                          /*0x0004*/
-    volatile unsigned long  asc_rsvd1[2];   /* for mapping */   /*0x0008*/
-    volatile unsigned long  asc_con;                            /*0x0010*/
-    volatile unsigned long  asc_bg;                             /*0x0014*/
-    volatile unsigned long  asc_fdv;                            /*0x0018*/
-    volatile unsigned long  asc_pmw;        /* not used */      /*0x001C*/
-    volatile unsigned long  asc_tbuf;                           /*0x0020*/
-    volatile unsigned long  asc_rbuf;                           /*0x0024*/
-    volatile unsigned long  asc_rsvd2[2];   /* for mapping */   /*0x0028*/
-    volatile unsigned long  asc_abcon;                          /*0x0030*/
-    volatile unsigned long  asc_abstat;     /* not used */      /*0x0034*/
-    volatile unsigned long  asc_rsvd3[2];   /* for mapping */   /*0x0038*/
-    volatile unsigned long  asc_rxfcon;                         /*0x0040*/
-    volatile unsigned long  asc_txfcon;                         /*0x0044*/
-    volatile unsigned long  asc_fstat;                          /*0x0048*/
-    volatile unsigned long  asc_rsvd4;      /* for mapping */   /*0x004C*/
-    volatile unsigned long  asc_whbcon;                         /*0x0050*/
-    volatile unsigned long  asc_whbabcon;                       /*0x0054*/
-    volatile unsigned long  asc_whbabstat;  /* not used */      /*0x0058*/
-
-} incaAsc_t;
-
-#endif /* __INCincaAscSioh */
diff --git a/arch/mips/cpu/mips32/incaip/config.mk b/arch/mips/cpu/mips32/incaip/config.mk
deleted file mode 100644
index 5c89129..0000000
--- a/arch/mips/cpu/mips32/incaip/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2011
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mtune=4kc
diff --git a/arch/mips/cpu/mips32/incaip/incaip_clock.c b/arch/mips/cpu/mips32/incaip/incaip_clock.c
deleted file mode 100644
index efada9f..0000000
--- a/arch/mips/cpu/mips32/incaip/incaip_clock.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/inca-ip.h>
-
-
-/*******************************************************************************
-*
-* get_cpuclk - returns the frequency of the CPU.
-*
-* Gets the value directly from the INCA-IP hardware.
-*
-* RETURNS:
-*          150.000.000 for 150 MHz
-*          133.333.333 for 133 MHz (= 400MHz/3)
-*          100.000.000 for 100 MHz (= 400MHz/4)
-* NOTE:
-*   This functions should be used by the hardware driver to get the correct
-*   frequency of the CPU. Don't use the macros, which are set to init the CPU
-*   frequency in the ROM code.
-*/
-uint incaip_get_cpuclk (void)
-{
-	/*-------------------------------------------------------------------------*/
-	/* CPU Clock Input Multiplexer (MUX I)                                     */
-	/* Multiplexer MUX I selects the maximum input clock to the CPU.           */
-	/*-------------------------------------------------------------------------*/
-	if (*((volatile ulong *) INCA_IP_CGU_CGU_MUXCR) &
-	    INCA_IP_CGU_CGU_MUXCR_MUXI) {
-		/* MUX I set to 150 MHz clock */
-		return 150000000;
-	} else {
-		/* MUX I set to 100/133 MHz clock */
-		if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) {
-			/* Division value is 1/3, maximum CPU operating */
-			/* frequency is 133.3 MHz                       */
-			return 133333333;
-		} else {
-			/* Division value is 1/4, maximum CPU operating */
-			/* frequency is 100 MHz                         */
-			return 100000000;
-		}
-	}
-}
-
-/*******************************************************************************
-*
-* get_fpiclk - returns the frequency of the FPI bus.
-*
-* Gets the value directly from the INCA-IP hardware.
-*
-* RETURNS: Frquency in Hz
-*
-* NOTE:
-*   This functions should be used by the hardware driver to get the correct
-*   frequency of the CPU. Don't use the macros, which are set to init the CPU
-*   frequency in the ROM code.
-*   The calculation for the
-*/
-uint incaip_get_fpiclk (void)
-{
-	uint clkCPU;
-
-	clkCPU = incaip_get_cpuclk ();
-
-	switch (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0xC) {
-	case 0x4:
-		return clkCPU >> 1;	/* devided by 2 */
-		break;
-	case 0x8:
-		return clkCPU >> 2;	/* devided by 4 */
-		break;
-	default:
-		return clkCPU;
-		break;
-	}
-}
-
-int incaip_set_cpuclk (void)
-{
-	extern void ebu_init(long);
-	extern void cgu_init(long);
-	extern void sdram_init(long);
-	char tmp[64];
-	ulong cpuclk;
-
-	if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) {
-		cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
-		cgu_init (cpuclk);
-		ebu_init (cpuclk);
-		sdram_init (cpuclk);
-	}
-
-	return 0;
-}
diff --git a/arch/mips/cpu/mips32/incaip/incaip_wdt.S b/arch/mips/cpu/mips32/incaip/incaip_wdt.S
deleted file mode 100644
index b15320a..0000000
--- a/arch/mips/cpu/mips32/incaip/incaip_wdt.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- *  INCA-IP Watchdog timer management code.
- *
- *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#include <config.h>
-#include <asm/regdef.h>
-
-
-#define WD_BASE            0xb8000000
-#define WD_CON0(value)     0x0020(value)
-#define WD_CON1(value)     0x0024(value)
-#define WD_DISABLE         0x00000008
-#define WD_ENABLE          0x00000000
-#define WD_WRITE_PW        0xFFFC00F8
-#define WD_WRITE_ENDINIT   0xFFFC00F3
-#define WD_WRITE_INIT      0xFFFC00F2
-
-
-	.globl	disable_incaip_wdt
-disable_incaip_wdt:
-	li	t0, WD_BASE
-
-	/* Calculate password.
-	 */
-	lw	t2, WD_CON1(t0)
-	and	t2, 0xC
-
-	lw	t3, WD_CON0(t0)
-	and	t3, 0xFFFFFF01
-
-	or	t3, t2
-	or	t3, 0xF0
-
-	sw	t3, WD_CON0(t0)		/* write password */
-
-	/* Clear ENDINIT.
-	 */
-	li	t1, WD_WRITE_INIT
-	sw	t1, WD_CON0(t0)
-
-
-	li	t1, WD_DISABLE
-	sw	t1, WD_CON1(t0)		/* disable watchdog */
-	li	t1, WD_WRITE_PW
-	sw	t1, WD_CON0(t0)		/* write password */
-	li	t1, WD_WRITE_ENDINIT
-	sw	t1, WD_CON0(t0)		/* end command */
-
-	jr	ra
-	nop