microblaze: Move architecture to use generic board init

Compile code with -fPIC to get GOT. Do not build SPL
with fPIC because it increasing SPL size for nothing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

2 files changed, 0 insertions, 202 deletions

diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 339dd15..0289d0c 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -5,6 +5,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y	+= board.o
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
 obj-y	+= muldi3.o
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
deleted file mode 100644
index bd028a6..0000000
--- a/arch/microblaze/lib/board.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Michal  SIMEK <monstr@monstr.eu>
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <version.h>
-#include <watchdog.h>
-#include <stdio_dev.h>
-#include <serial.h>
-#include <net.h>
-#include <spi.h>
-#include <linux/compiler.h>
-#include <asm/processor.h>
-#include <asm/microblaze_intc.h>
-#include <fdtdec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int display_banner(void)
-{
-	printf("\n\n%s\n\n", version_string);
-	return 0;
-}
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t) (void);
-
-init_fnc_t *init_sequence[] = {
-	env_init,
-#ifdef CONFIG_OF_CONTROL
-	fdtdec_check_fdt,
-#endif
-	serial_init,
-#ifndef CONFIG_SPL_BUILD
-	console_init_f,
-#endif
-	display_banner,
-#ifndef CONFIG_SPL_BUILD
-	interrupt_init,
-	timer_init,
-#endif
-	NULL,
-};
-
-unsigned long monitor_flash_len;
-
-void board_init_f(ulong not_used)
-{
-	bd_t *bd;
-	init_fnc_t **init_fnc_ptr;
-	gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
-	bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET
-						- GENERATED_BD_INFO_SIZE);
-#if defined(CONFIG_CMD_FLASH) && !defined(CONFIG_SPL_BUILD)
-	ulong flash_size = 0;
-#endif
-	asm ("nop");	/* FIXME gd is not initialize - wait */
-	memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
-	memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
-	gd->bd = bd;
-	gd->baudrate = CONFIG_BAUDRATE;
-	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
-	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
-	gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
-
-	monitor_flash_len = __end - __text_start;
-
-#ifdef CONFIG_OF_EMBED
-	/* Get a pointer to the FDT */
-	gd->fdt_blob = __dtb_dt_begin;
-#elif defined CONFIG_OF_SEPARATE
-	/* FDT is at end of image */
-	gd->fdt_blob = (void *)__end;
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-	/* Allow the early environment to override the fdt address */
-	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
-						(uintptr_t)gd->fdt_blob);
-#endif
-
-	/*
-	 * The Malloc area is immediately below the monitor copy in DRAM
-	 * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
-	 * as our monitory code is run from SDRAM
-	 */
-	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-
-	serial_initialize();
-
-#ifdef CONFIG_XILINX_TB_WATCHDOG
-	hw_watchdog_init();
-#endif
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		WATCHDOG_RESET();
-		if ((*init_fnc_ptr) () != 0)
-			hang();
-	}
-
-#ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_OF_CONTROL
-	/* For now, put this check after the console is ready */
-	if (fdtdec_prepare_fdt())
-		panic("** No FDT - please see doc/README.fdt-control");
-	else
-		printf("DTB: 0x%x\n", (u32)gd->fdt_blob);
-#endif
-
-	puts("SDRAM :\n");
-	printf("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
-	printf("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
-	printf("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
-
-#if defined(CONFIG_CMD_FLASH)
-	puts("Flash: ");
-	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
-	flash_size = flash_init();
-	if (bd->bi_flashstart && flash_size > 0) {
-# ifdef CONFIG_SYS_FLASH_CHECKSUM
-		print_size(flash_size, "");
-		/*
-		 * Compute and print flash CRC if flashchecksum is set to 'y'
-		 *
-		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
-		 */
-		if (getenv_yesno("flashchecksum") == 1) {
-			printf("  CRC: %08X",
-			       crc32(0, (const u8 *)bd->bi_flashstart,
-				     flash_size)
-			);
-		}
-		putc('\n');
-# else	/* !CONFIG_SYS_FLASH_CHECKSUM */
-		print_size(flash_size, "\n");
-# endif /* CONFIG_SYS_FLASH_CHECKSUM */
-		bd->bi_flashsize = flash_size;
-		bd->bi_flashoffset = bd->bi_flashstart + flash_size;
-	} else {
-		puts("Flash init FAILED");
-		bd->bi_flashstart = 0;
-		bd->bi_flashsize = 0;
-		bd->bi_flashoffset = 0;
-	}
-#endif
-
-#ifdef CONFIG_SPI
-	spi_init();
-#endif
-
-	/* relocate environment function pointers etc. */
-	env_relocate();
-
-	/* Initialize stdio devices */
-	stdio_init();
-
-	/* Initialize the jump table for applications */
-	jumptable_init();
-
-	/* Initialize the console (after the relocation and devices init) */
-	console_init_r();
-
-	board_init();
-
-	/* Initialize from environment */
-	load_addr = getenv_ulong("loadaddr", 16, load_addr);
-
-#if defined(CONFIG_CMD_NET)
-	printf("Net:   ");
-	eth_initialize(gd->bd);
-
-	uchar enetaddr[6];
-	eth_getenv_enetaddr("ethaddr", enetaddr);
-	printf("MAC:   %pM\n", enetaddr);
-#endif
-
-	/* main_loop */
-	for (;;) {
-		WATCHDOG_RESET();
-		main_loop();
-	}
-#endif /* CONFIG_SPL_BUILD */
-}