summaryrefslogtreecommitdiff
path: root/arch/i386
diff options
context:
space:
mode:
authorGraeme Russ <graeme.russ@gmail.com>2011-02-12 15:11:52 +1100
committerGraeme Russ <graeme.russ@gmail.com>2011-02-12 15:11:52 +1100
commited4cba79d640daa33806fa228c1a10c6bf9e2101 (patch)
treeb6500012ce46b0cd5ae43fdf0ff136f42e3e7133 /arch/i386
parent2e2613d2c4755426cb6bfddf1ca7714b0deec177 (diff)
downloadu-boot-imx-ed4cba79d640daa33806fa228c1a10c6bf9e2101.zip
u-boot-imx-ed4cba79d640daa33806fa228c1a10c6bf9e2101.tar.gz
u-boot-imx-ed4cba79d640daa33806fa228c1a10c6bf9e2101.tar.bz2
x86: Use Cache-As-RAM for initial stack
Diffstat (limited to 'arch/i386')
-rw-r--r--arch/i386/cpu/sc520/Makefile1
-rw-r--r--arch/i386/cpu/sc520/sc520_asm.S6
-rw-r--r--arch/i386/cpu/sc520/sc520_car.S94
-rw-r--r--arch/i386/cpu/start.S35
4 files changed, 115 insertions, 21 deletions
diff --git a/arch/i386/cpu/sc520/Makefile b/arch/i386/cpu/sc520/Makefile
index b962b02..3c25cba 100644
--- a/arch/i386/cpu/sc520/Makefile
+++ b/arch/i386/cpu/sc520/Makefile
@@ -37,6 +37,7 @@ COBJS-$(CONFIG_SYS_SC520_SSI) += sc520_ssi.o
COBJS-$(CONFIG_SYS_SC520_TIMER) += sc520_timer.o
SOBJS-$(CONFIG_SYS_SC520) += sc520_asm.o
+SOBJS-$(CONFIG_SYS_SC520) += sc520_car.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/arch/i386/cpu/sc520/sc520_asm.S b/arch/i386/cpu/sc520/sc520_asm.S
index 9f6cce3..901aa61 100644
--- a/arch/i386/cpu/sc520/sc520_asm.S
+++ b/arch/i386/cpu/sc520/sc520_asm.S
@@ -515,7 +515,7 @@ bad_ram:
dram_done:
/* Restore Boot Flags */
movl %ebx, %ebp
- jmp mem_init_ret
+ ret
#if CONFIG_SYS_SDRAM_ECC_ENABLE
.globl init_ecc
@@ -560,7 +560,7 @@ set_ecc:
movb %al,(%edi)
out:
- jmp init_ecc_ret
+ ret
#endif
/*
@@ -605,4 +605,4 @@ bank3: movl (%edi), %eax
done:
movl %edx, %eax
- jmp get_mem_size_ret
+ ret
diff --git a/arch/i386/cpu/sc520/sc520_car.S b/arch/i386/cpu/sc520/sc520_car.S
new file mode 100644
index 0000000..22f5225
--- /dev/null
+++ b/arch/i386/cpu/sc520/sc520_car.S
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2010
+ * Graeme Russ <graeme.russ@gmail.com>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <asm/processor-flags.h>
+#include <asm/ic/sc520.h>
+
+.section .text
+
+.globl car_init
+car_init:
+ /*
+ * How to enable Cache-As-RAM for the AMD Elan SC520:
+ * 1. Turn off the CPU Cache (may not be strictly required)
+ * 2. Set code execution PAR (usually the BOOTCS region) to be
+ * non-cachable
+ * 3. Create a Cachable PAR Region for an area of memory which is
+ * a) NOT where the code is being executed
+ * b) NOT SDRAM (Controller not initialised yet)
+ * c) WILL response to read requests
+ * The easiest way to do this is to create a second BOOTCS
+ * PAR mappnig with an address != the PAR in step 2
+ * 4. Issue a wbinvd to invalidate the CPU cache
+ * 5. Turn on the CPU Cache
+ * 6. Read 16kB from the cached PAR region setup in step 3
+ * 7. Turn off the CPU Cache (but DO NOT issue a wbinvd)
+ *
+ * The following code uses PAR2 as the cached PAR (PAR0 and PAR1
+ * are avoided as these are the only two PARs which can be used
+ * as PCI BUS Memory regions which the board might require)
+ *
+ * The configuration of PAR2 must be set in the board configuration
+ * file as CONFIG_SYS_SC520_CAR_PAR
+ */
+
+ /* Configure Cache-As-RAM PAR */
+ movl $CONFIG_SYS_SC520_CAR_PAR, %eax
+ movl $SC520_PAR2, %edi
+ movl %eax, (%edi)
+
+ /* Trash the cache then turn it on */
+ wbinvd
+ movl %cr0, %eax
+ andl $~(X86_CR0_NW | X86_CR0_CD), %eax
+ movl %eax, %cr0
+
+ /*
+ * The cache is now enabled and empty. Map a region of memory to
+ * it by reading that region.
+ */
+ movl $CONFIG_SYS_CAR_ADDR, %esi
+ movl $CONFIG_SYS_CAR_SIZE, %ecx
+ shrl $2, %ecx /* we are reading longs */
+ cld
+ rep lodsl
+
+ /* Turn off the cache, but don't trash it */
+ movl %cr0, %eax
+ orl $(X86_CR0_NW | X86_CR0_CD), %eax
+ movl %eax, %cr0
+
+ /* Clear the CAR region */
+ xorl %eax, %eax
+ movl $CONFIG_SYS_CAR_ADDR, %edi
+ movl $CONFIG_SYS_CAR_SIZE, %ecx
+ shrl $2, %ecx /* we are writing longs */
+ rep stosl
+
+ /*
+ * Done - We should now have CONFIG_SYS_CAR_SIZE bytes of
+ * Cache-As-RAM
+ */
+ jmp car_init_ret
diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S
index 0ce9713..df9ca0d 100644
--- a/arch/i386/cpu/start.S
+++ b/arch/i386/cpu/start.S
@@ -72,41 +72,40 @@ _start:
.globl early_board_init_ret
early_board_init_ret:
+ /* Initialise Cache-As-RAM */
+ jmp car_init
+.globl car_init_ret
+car_init_ret:
+ /*
+ * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
+ * or fully initialised SDRAM - we really don't care which)
+ * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
+ */
+ movl $CONFIG_SYS_INIT_SP_ADDR, %esp
+
/* Skip memory initialization if not starting from cold-reset */
movl %ebx, %ecx
andl $GD_FLG_COLD_BOOT, %ecx
jz skip_mem_init
/* size memory */
- jmp mem_init
-.globl mem_init_ret
-mem_init_ret:
+ call mem_init
skip_mem_init:
/* fetch memory size (into %eax) */
- jmp get_mem_size
-.globl get_mem_size_ret
-get_mem_size_ret:
+ call get_mem_size
+ movl %eax, %esp
#if CONFIG_SYS_SDRAM_ECC_ENABLE
/* Skip ECC initialization if not starting from cold-reset */
movl %ebx, %ecx
andl $GD_FLG_COLD_BOOT, %ecx
- jz init_ecc_ret
- jmp init_ecc
+ jz skip_ecc_init
+ call init_ecc
-.globl init_ecc_ret
-init_ecc_ret:
+skip_init_ecc:
#endif
- /* Check we have enough memory for stack */
- movl $CONFIG_SYS_STACK_SIZE, %ecx
- cmpl %ecx, %eax
- jb die
-mem_ok:
- /* Set stack pointer to upper memory limit*/
- movl %eax, %esp
-
/* Test the stack */
pushl $0
popl %ecx