summaryrefslogtreecommitdiff
path: root/arch/blackfin
diff options
context:
space:
mode:
authorMike Frysinger <vapier@gentoo.org>2011-05-10 16:22:25 -0400
committerMike Frysinger <vapier@gentoo.org>2011-09-29 16:38:05 -0400
commit2151374fa6556ec1027d1d0003b1e238a106cc63 (patch)
treeb93e921639bccc57a98262ebbcd7b5dd54bd64e8 /arch/blackfin
parent20698b350614d4575afd20bfba1396873bea87a4 (diff)
downloadu-boot-imx-2151374fa6556ec1027d1d0003b1e238a106cc63.zip
u-boot-imx-2151374fa6556ec1027d1d0003b1e238a106cc63.tar.gz
u-boot-imx-2151374fa6556ec1027d1d0003b1e238a106cc63.tar.bz2
Blackfin: post: generalize led/button tests with GPIOs
Make it easy for any Blackfin board to enable led/push button tests. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'arch/blackfin')
-rw-r--r--arch/blackfin/include/asm/config.h18
-rw-r--r--arch/blackfin/lib/Makefile1
-rw-r--r--arch/blackfin/lib/post.c85
3 files changed, 104 insertions, 0 deletions
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index bc3c252..53af310 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -169,4 +169,22 @@
# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
+/* Blackfin POST tests */
+#ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
+# define CONFIG_POST_BSPEC1 \
+ { \
+ "LED test", "led", "This test verifies LEDs on the board.", \
+ POST_MEM | POST_ALWAYS, &led_post_test, NULL, NULL, \
+ CONFIG_SYS_POST_BSPEC1, \
+ }
+#endif
+#ifdef CONFIG_POST_BSPEC2_GPIO_BUTTONS
+# define CONFIG_POST_BSPEC2 \
+ { \
+ "Button test", "button", "This test verifies buttons on the board.", \
+ POST_MEM | POST_ALWAYS, &button_post_test, NULL, NULL, \
+ CONFIG_SYS_POST_BSPEC2, \
+ }
+#endif
+
#endif
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
index 18c9f74..37e0663 100644
--- a/arch/blackfin/lib/Makefile
+++ b/arch/blackfin/lib/Makefile
@@ -46,6 +46,7 @@ COBJS-y += clocks.o
COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o
COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
COBJS-y += muldi3.o
+COBJS-$(CONFIG_HAS_POST) += post.o
COBJS-y += string.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/blackfin/lib/post.c b/arch/blackfin/lib/post.c
new file mode 100644
index 0000000..b3c5fab
--- /dev/null
+++ b/arch/blackfin/lib/post.c
@@ -0,0 +1,85 @@
+/*
+ * Blackfin POST code
+ *
+ * Copyright (c) 2005-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <post.h>
+
+#include <asm/gpio.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
+int led_post_test(int flags)
+{
+ unsigned leds[] = { CONFIG_POST_BSPEC1_GPIO_LEDS };
+ int i;
+
+ /* First turn them all off */
+ for (i = 0; i < ARRAY_SIZE(leds); ++i) {
+ if (gpio_request(leds[i], "post")) {
+ printf("could not request gpio %u\n", leds[i]);
+ continue;
+ }
+ gpio_direction_output(leds[i], 0);
+ }
+
+ /* Now turn them on one by one */
+ for (i = 0; i < ARRAY_SIZE(leds); ++i) {
+ printf("LED%i on", i + 1);
+ gpio_set_value(leds[i], 1);
+ udelay(1000000);
+ printf("\b\b\b\b\b\b\b");
+ gpio_free(leds[i]);
+ }
+
+ return 0;
+}
+#endif
+
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
+int button_post_test(int flags)
+{
+ unsigned buttons[] = { CONFIG_POST_BSPEC2_GPIO_BUTTONS };
+ unsigned int sws[] = { CONFIG_POST_BSPEC2_GPIO_NAMES };
+ int i, delay = 5;
+ unsigned short value = 0;
+ int result = 0;
+
+ for (i = 0; i < ARRAY_SIZE(buttons); ++i) {
+ if (gpio_request(buttons[i], "post")) {
+ printf("could not request gpio %u\n", buttons[i]);
+ continue;
+ }
+ gpio_direction_input(buttons[i]);
+
+ delay = 5;
+ printf("\n--------Press SW%i: %2d ", sws[i], delay);
+ while (delay--) {
+ int j;
+ for (j = 0; j < 100; j++) {
+ value = gpio_get_value(buttons[i]);
+ if (value != 0)
+ break;
+ udelay(10000);
+ }
+ printf("\b\b\b%2d ", delay);
+ }
+ if (value != 0)
+ puts("\b\bOK");
+ else {
+ result = -1;
+ puts("\b\bfailed");
+ }
+
+ gpio_free(buttons[i]);
+ }
+
+ puts("\n");
+
+ return result;
+}
+#endif