bfin: Move gpio support for bf54x and bf60x into the generic driver folder.

The gpio spec for bf54x and bf60x differ a lot from the old gpio driver for bf5xx.
A lot of machine macros are used to accomodate both code in one gpio driver.
This patch split the old gpio driver and move new gpio2 support to the generic
gpio driver folder.

- To enable gpio2 driver, macro CONFIG_ADI_GPIO2 should be defined in the board's
config header file.
- The gpio2 driver supports bf54x, bf60x and future ADI processors, while the
older gpio driver supports bf50x, bf51x, bf52x, bf53x and bf561.
- All blackfin specific gpio function names are replaced by the generic gpio APIs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>

2 files changed, 21 insertions, 126 deletions

diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile
index 929fc8b..1421cb2 100644
--- a/arch/blackfin/cpu/Makefile
+++ b/arch/blackfin/cpu/Makefile
@@ -18,7 +18,7 @@ CEXTRA   := initcode.o
 SEXTRA   := start.o
 SOBJS    := interrupt.o cache.o
 COBJS-y  += cpu.o
-COBJS-y  += gpio.o
+COBJS-$(CONFIG_ADI_GPIO1) += gpio.o
 COBJS-y  += interrupts.o
 COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o
 COBJS-y  += os_log.o
diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c
index f684be5..f74a0b7 100644
--- a/arch/blackfin/cpu/gpio.c
+++ b/arch/blackfin/cpu/gpio.c
@@ -1,5 +1,6 @@
 /*
- * GPIO Abstraction Layer
+ * ADI GPIO1 Abstraction Layer
+ * Support BF50x, BF51x, BF52x, BF53x and BF561 only.
  *
  * Copyright 2006-2010 Analog Devices Inc.
  *
@@ -55,25 +56,6 @@ static struct gpio_port_t * const gpio_array[] = {
 	(struct gpio_port_t *) FIO0_FLAG_D,
 	(struct gpio_port_t *) FIO1_FLAG_D,
 	(struct gpio_port_t *) FIO2_FLAG_D,
-#elif defined(CONFIG_BF54x)
-	(struct gpio_port_t *)PORTA_FER,
-	(struct gpio_port_t *)PORTB_FER,
-	(struct gpio_port_t *)PORTC_FER,
-	(struct gpio_port_t *)PORTD_FER,
-	(struct gpio_port_t *)PORTE_FER,
-	(struct gpio_port_t *)PORTF_FER,
-	(struct gpio_port_t *)PORTG_FER,
-	(struct gpio_port_t *)PORTH_FER,
-	(struct gpio_port_t *)PORTI_FER,
-	(struct gpio_port_t *)PORTJ_FER,
-#elif defined(CONFIG_BF60x)
-	(struct gpio_port_t *)PORTA_FER,
-	(struct gpio_port_t *)PORTB_FER,
-	(struct gpio_port_t *)PORTC_FER,
-	(struct gpio_port_t *)PORTD_FER,
-	(struct gpio_port_t *)PORTE_FER,
-	(struct gpio_port_t *)PORTF_FER,
-	(struct gpio_port_t *)PORTG_FER,
 #else
 # error no gpio arrays defined
 #endif
@@ -174,12 +156,6 @@ DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES));
 
 inline int check_gpio(unsigned gpio)
 {
-#if defined(CONFIG_BF54x)
-	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
-	    || gpio == GPIO_PH14 || gpio == GPIO_PH15
-	    || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
-		return -EINVAL;
-#endif
 	if (gpio >= MAX_BLACKFIN_GPIOS)
 		return -EINVAL;
 	return 0;
@@ -218,18 +194,6 @@ static void port_setup(unsigned gpio, unsigned short usage)
 	else
 		*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
 	SSYNC();
-#elif defined(CONFIG_BF54x)
-	if (usage == GPIO_USAGE)
-		gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
-	else
-		gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
-	SSYNC();
-#elif defined(CONFIG_BF60x)
-	if (usage == GPIO_USAGE)
-		gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio);
-	else
-		gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio);
-	SSYNC();
 #endif
 }
 
@@ -304,30 +268,6 @@ static void portmux_setup(unsigned short per)
 		}
 	}
 }
-#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-inline void portmux_setup(unsigned short per)
-{
-	u32 pmux;
-	u16 ident = P_IDENT(per);
-	u16 function = P_FUNCT2MUX(per);
-
-	pmux = gpio_array[gpio_bank(ident)]->port_mux;
-
-	pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
-	pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
-
-	gpio_array[gpio_bank(ident)]->port_mux = pmux;
-}
-
-inline u16 get_portmux(unsigned short per)
-{
-	u32 pmux;
-	u16 ident = P_IDENT(per);
-
-	pmux = gpio_array[gpio_bank(ident)]->port_mux;
-
-	return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
-}
 #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
 inline void portmux_setup(unsigned short per)
 {
@@ -344,7 +284,6 @@ inline void portmux_setup(unsigned short per)
 # define portmux_setup(...)  do { } while (0)
 #endif
 
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x)
 /***********************************************************
 *
 * FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -491,15 +430,6 @@ GET_GPIO_P(both)
 GET_GPIO_P(maska)
 GET_GPIO_P(maskb)
 
-#else /* CONFIG_BF54x */
-
-unsigned short get_gpio_dir(unsigned gpio)
-{
-	return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
-}
-
-#endif /* CONFIG_BF54x */
-
 /***********************************************************
 *
 * FUNCTIONS:	Blackfin Peripheral Resource Allocation
@@ -548,11 +478,7 @@ int peripheral_request(unsigned short per, const char *label)
 		 * be requested and used by several drivers
 		 */
 
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-		if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
-#else
 		if (!(per & P_MAYSHARE)) {
-#endif
 			/*
 			 * Allow that the identical pin function can
 			 * be requested from the same driver twice
@@ -641,7 +567,7 @@ void peripheral_free_list(const unsigned short per[])
 * MODIFICATION HISTORY :
 **************************************************************/
 
-int bfin_gpio_request(unsigned gpio, const char *label)
+int gpio_request(unsigned gpio, const char *label)
 {
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
@@ -665,11 +591,9 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 		       gpio, get_label(gpio));
 		return -EBUSY;
 	}
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x)
 	else {	/* Reset POLAR setting when acquiring a gpio for the first time */
 		set_gpio_polar(gpio, 0);
 	}
-#endif
 
 	reserve(gpio, gpio);
 	set_label(gpio, label);
@@ -679,27 +603,27 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 	return 0;
 }
 
-#ifdef CONFIG_BFIN_GPIO_TRACK
-void bfin_gpio_free(unsigned gpio)
+int gpio_free(unsigned gpio)
 {
 	if (check_gpio(gpio) < 0)
-		return;
+		return -1;
 
 	if (unlikely(!is_reserved(gpio, gpio, 0))) {
 		gpio_error(gpio);
-		return;
+		return -1;
 	}
 
 	unreserve(gpio, gpio);
 
 	set_label(gpio, "free");
+
+	return 0;
 }
-#endif
 
-#ifdef BFIN_SPECIAL_GPIO_BANKS
+#ifdef ADI_SPECIAL_GPIO_BANKS
 DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
 
-int bfin_special_gpio_request(unsigned gpio, const char *label)
+int special_gpio_request(unsigned gpio, const char *label)
 {
 	/*
 	 * Allow that the identical GPIO can
@@ -731,7 +655,7 @@ int bfin_special_gpio_request(unsigned gpio, const char *label)
 	return 0;
 }
 
-void bfin_special_gpio_free(unsigned gpio)
+void special_gpio_free(unsigned gpio)
 {
 	if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
 		gpio_error(gpio);
@@ -744,21 +668,13 @@ void bfin_special_gpio_free(unsigned gpio)
 }
 #endif
 
-static inline void __bfin_gpio_direction_input(unsigned gpio)
+static inline void __gpio_direction_input(unsigned gpio)
 {
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
-#else
 	gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
-#endif
-#if defined(CONFIG_BF60x)
-	gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio);
-#else
 	gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
-#endif
 }
 
-int bfin_gpio_direction_input(unsigned gpio)
+int gpio_direction_input(unsigned gpio)
 {
 	unsigned long flags;
 
@@ -768,31 +684,24 @@ int bfin_gpio_direction_input(unsigned gpio)
 	}
 
 	local_irq_save(flags);
-	__bfin_gpio_direction_input(gpio);
+	__gpio_direction_input(gpio);
 	AWA_DUMMY_READ(inen);
 	local_irq_restore(flags);
 
 	return 0;
 }
 
-void bfin_gpio_toggle_value(unsigned gpio)
-{
-#ifdef CONFIG_BF54x
-	gpio_set_value(gpio, !gpio_get_value(gpio));
-#else
-	gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
-#endif
-}
-
-void bfin_gpio_set_value(unsigned gpio, int arg)
+int gpio_set_value(unsigned gpio, int arg)
 {
 	if (arg)
 		gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
 	else
 		gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+
+	return 0;
 }
 
-int bfin_gpio_direction_output(unsigned gpio, int value)
+int gpio_direction_output(unsigned gpio, int value)
 {
 	unsigned long flags;
 
@@ -803,17 +712,9 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
 
 	local_irq_save(flags);
 
-#if defined(CONFIG_BF60x)
-	gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio);
-#else
 	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
-#endif
 	gpio_set_value(gpio, value);
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
-#else
 	gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
-#endif
 
 	AWA_DUMMY_READ(dir);
 	local_irq_restore(flags);
@@ -821,11 +722,8 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
 	return 0;
 }
 
-int bfin_gpio_get_value(unsigned gpio)
+int gpio_get_value(unsigned gpio)
 {
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
-#else
 	unsigned long flags;
 
 	if (unlikely(get_gpio_edge(gpio))) {
@@ -838,7 +736,6 @@ int bfin_gpio_get_value(unsigned gpio)
 		return ret;
 	} else
 		return get_gpio_data(gpio);
-#endif
 }
 
 /* If we are booting from SPI and our board lacks a strong enough pull up,
@@ -860,8 +757,7 @@ void bfin_reset_boot_spi_cs(unsigned short pin)
 	udelay(1);
 }
 
-#ifdef CONFIG_BFIN_GPIO_TRACK
-void bfin_gpio_labels(void)
+void gpio_labels(void)
 {
 	int c, gpio;
 
@@ -877,4 +773,3 @@ void bfin_gpio_labels(void)
 			continue;
 	}
 }
-#endif