Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
	cpu/arm1176/cpu.c
	cpu/arm1176/start.S
	cpu/arm_cortexa8/s5pc1xx/Makefile
	cpu/arm_cortexa8/s5pc1xx/clock.c
	drivers/serial/serial_s5p.c
	include/asm-arm/arch-s5pc1xx/clk.h
	include/asm-arm/arch-s5pc1xx/gpio.h
	include/asm-arm/arch-s5pc1xx/uart.h

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

1 files changed, 238 insertions, 0 deletions

diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S
new file mode 100644
index 0000000..7a3abba
--- /dev/null
+++ b/arch/blackfin/cpu/start.S
@@ -0,0 +1,238 @@
+/*
+ * U-boot - start.S Startup file for Blackfin u-boot
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * This file is based on head.S
+ * Copyright (c) 2003  Metrowerks/Motorola
+ * Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ *                     Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ * (c) 1995, Dionne & Associates
+ * (c) 1995, DKG Display Tech.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/core.h>
+#include <asm/mach-common/bits/dma.h>
+#include <asm/mach-common/bits/pll.h>
+
+#include "serial.h"
+
+/* It may seem odd that we make calls to functions even though we haven't
+ * relocated ourselves yet out of {flash,ram,wherever}.  This is OK because
+ * the "call" instruction in the Blackfin architecture is actually PC
+ * relative.  So we can call functions all we want and not worry about them
+ * not being relocated yet.
+ */
+
+.text
+ENTRY(_start)
+
+	/* Set our initial stack to L1 scratch space */
+	sp.l = LO(L1_SRAM_SCRATCH_END - 20);
+	sp.h = HI(L1_SRAM_SCRATCH_END - 20);
+
+#ifdef CONFIG_HW_WATCHDOG
+# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START
+#  define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000
+# endif
+	/* Program the watchdog with an initial timeout of ~5 seconds.
+	 * That should be long enough to bootstrap ourselves up and
+	 * then the common u-boot code can take over.
+	 */
+	P0.L = LO(WDOG_CNT);
+	P0.H = HI(WDOG_CNT);
+	R0.L = 0;
+	R0.H = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START));
+	[P0] = R0;
+	/* fire up the watchdog - R0.L above needs to be 0x0000 */
+	W[P0 + (WDOG_CTL - WDOG_CNT)] = R0;
+#endif
+
+	/* Turn on the serial for debugging the init process */
+	serial_early_init
+	serial_early_set_baud
+
+	serial_early_puts("Init Registers");
+
+	/* Disable self-nested interrupts and enable CYCLES for udelay() */
+	R0 = CCEN | 0x30;
+	SYSCFG = R0;
+
+	/* Zero out registers required by Blackfin ABI.
+	 * http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface
+	 */
+	r1 = 0 (x);
+	/* Disable circular buffers */
+	l0 = r1;
+	l1 = r1;
+	l2 = r1;
+	l3 = r1;
+	/* Disable hardware loops in case we were started by 'go' */
+	lc0 = r1;
+	lc1 = r1;
+
+	/* Save RETX so we can pass it while booting Linux */
+	r7 = RETX;
+
+#if CONFIG_MEM_SIZE
+	/* Figure out where we are currently executing so that we can decide
+	 * how to best reprogram and relocate things.  We'll pass below:
+	 *  R4: load address of _start
+	 *  R5: current (not load) address of _start
+	 */
+	serial_early_puts("Find ourselves");
+
+	call _get_pc;
+.Loffset:
+	r1.l = .Loffset;
+	r1.h = .Loffset;
+	r4.l = _start;
+	r4.h = _start;
+	r3 = r1 - r4;
+	r5 = r0 - r3;
+
+	/* Inform upper layers if we had to do the relocation ourselves.
+	 * This allows us to detect whether we were loaded by 'go 0x1000'
+	 * or by the bootrom from an LDR.  "R6" is "loaded_from_ldr".
+	 */
+	r6 = 1 (x);
+	cc = r4 == r5;
+	if cc jump .Lnorelocate;
+	r6 = 0 (x);
+
+	/* In bypass mode, we don't have an LDR with an init block
+	 * so we need to explicitly call it ourselves.  This will
+	 * reprogram our clocks, memory, and setup our async banks.
+	 */
+	serial_early_puts("Program Clocks");
+
+	/* if we're executing >=0x20000000, then we dont need to dma */
+	r3 = 0x0;
+	r3.h = 0x2000;
+	cc = r5 < r3 (iu);
+	if cc jump .Ldma_and_reprogram;
+#else
+	r6 = 1 (x);	/* fake loaded_from_ldr = 1 */
+#endif
+	r0 = 0 (x);	/* set bootstruct to NULL */
+	call _initcode;
+	jump .Lprogrammed;
+
+	/* we're sitting in external memory, so dma into L1 and reprogram */
+.Ldma_and_reprogram:
+	r0.l = LO(L1_INST_SRAM);
+	r0.h = HI(L1_INST_SRAM);
+	r1.l = __initcode_lma;
+	r1.h = __initcode_lma;
+	r2.l = __initcode_len;
+	r2.h = __initcode_len;
+	r1 = r1 - r4;	/* convert r1 from load address of initcode ... */
+	r1 = r1 + r5;	/* ... to current (not load) address of initcode */
+	p3 = r0;
+	call _dma_memcpy_nocache;
+	r0 = 0 (x);	/* set bootstruct to NULL */
+	call (p3);
+
+	/* Since we reprogrammed SCLK, we need to update the serial divisor */
+.Lprogrammed:
+	serial_early_set_baud
+
+#if CONFIG_MEM_SIZE
+	/* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded
+	 * monitor location in the end of RAM.  We know that memcpy() only
+	 * uses registers, so it is safe to call here.  Note that this only
+	 * copies to external memory ... we do not start executing out of
+	 * it yet (see "lower to 15" below).
+	 */
+	serial_early_puts("Relocate");
+	r0 = r4;
+	r1 = r5;
+	r2.l = LO(CONFIG_SYS_MONITOR_LEN);
+	r2.h = HI(CONFIG_SYS_MONITOR_LEN);
+	call _memcpy_ASM;
+#endif
+
+	/* Initialize BSS section ... we know that memset() does not
+	 * use the BSS, so it is safe to call here.  The bootrom LDR
+	 * takes care of clearing things for us.
+	 */
+	serial_early_puts("Zero BSS");
+	r0.l = __bss_vma;
+	r0.h = __bss_vma;
+	r1 = 0 (x);
+	r2.l = __bss_len;
+	r2.h = __bss_len;
+	call _memset;
+
+.Lnorelocate:
+
+	/* Setup the actual stack in external memory */
+	sp.h = HI(CONFIG_STACKBASE);
+	sp.l = LO(CONFIG_STACKBASE);
+	fp = sp;
+
+	/* Now lower ourselves from the highest interrupt level to
+	 * the lowest.  We do this by masking all interrupts but 15,
+	 * setting the 15 handler to ".Lenable_nested", raising the 15
+	 * interrupt, and then returning from the highest interrupt
+	 * level to the dummy "jump" until the interrupt controller
+	 * services the pending 15 interrupt.  If executing out of
+	 * flash, these steps also changes the code flow from flash
+	 * to external memory.
+	 */
+	serial_early_puts("Lower to 15");
+	r0 = r7;
+	r1 = r6;
+	p0.l = LO(EVT15);
+	p0.h = HI(EVT15);
+	p1.l = .Lenable_nested;
+	p1.h = .Lenable_nested;
+	[p0] = p1;
+	r7 = EVT_IVG15 (z);
+	sti r7;
+	raise 15;
+	p4.l = .LWAIT_HERE;
+	p4.h = .LWAIT_HERE;
+	reti = p4;
+	rti;
+
+	/* Enable nested interrupts before continuing with cpu init */
+.Lenable_nested:
+	cli r7;
+	[--sp] = reti;
+	jump.l _cpu_init_f;
+
+.LWAIT_HERE:
+	jump .LWAIT_HERE;
+ENDPROC(_start)
+
+LENTRY(_get_pc)
+	r0 = rets;
+#if ANOMALY_05000371
+	NOP;
+	NOP;
+	NOP;
+#endif
+	rts;
+ENDPROC(_get_pc)