Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
	drivers/serial/serial_lh7a40x.c

Signed-off-by: Tom Rini <trini@ti.com>

13 files changed, 23 insertions, 3337 deletions

diff --git a/arch/arm/cpu/arm1176/tnetv107x/Makefile b/arch/arm/cpu/arm1176/tnetv107x/Makefile
index c63dc92..c1d4d67 100644
--- a/arch/arm/cpu/arm1176/tnetv107x/Makefile
+++ b/arch/arm/cpu/arm1176/tnetv107x/Makefile
@@ -21,7 +21,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).o
 
-COBJS	+= aemif.o clock.o init.o mux.o timer.o wdt.o
+COBJS	+= aemif.o clock.o init.o mux.o timer.o
 SOBJS	+= lowlevel_init.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/arm1176/tnetv107x/wdt.c b/arch/arm/cpu/arm1176/tnetv107x/wdt.c
deleted file mode 100644
index 18aadb0..0000000
--- a/arch/arm/cpu/arm1176/tnetv107x/wdt.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * TNETV107X: Watchdog timer implementation (for reset)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-
-#define MAX_DIV		0xFFFE0001
-
-struct wdt_regs {
-	u32 kick_lock;
-#define KICK_LOCK_1	0x5555
-#define KICK_LOCK_2	0xaaaa
-	u32 kick;
-
-	u32 change_lock;
-#define CHANGE_LOCK_1	0x6666
-#define CHANGE_LOCK_2	0xbbbb
-	u32 change;
-
-	u32 disable_lock;
-#define DISABLE_LOCK_1	0x7777
-#define DISABLE_LOCK_2	0xcccc
-#define DISABLE_LOCK_3	0xdddd
-	u32 disable;
-
-	u32 prescale_lock;
-#define PRESCALE_LOCK_1	0x5a5a
-#define PRESCALE_LOCK_2	0xa5a5
-	u32 prescale;
-};
-
-static struct wdt_regs* regs = (struct wdt_regs *)TNETV107X_WDT0_ARM_BASE;
-
-#define wdt_reg_read(reg)	__raw_readl(&regs->reg)
-#define wdt_reg_write(reg, val)	__raw_writel((val), &regs->reg)
-
-static int write_prescale_reg(unsigned long prescale_value)
-{
-	wdt_reg_write(prescale_lock, PRESCALE_LOCK_1);
-	if ((wdt_reg_read(prescale_lock) & 0x3) != 0x1)
-		return -1;
-
-	wdt_reg_write(prescale_lock, PRESCALE_LOCK_2);
-	if ((wdt_reg_read(prescale_lock) & 0x3) != 0x3)
-		return -1;
-
-	wdt_reg_write(prescale, prescale_value);
-
-	return 0;
-}
-
-static int write_change_reg(unsigned long initial_timer_value)
-{
-	wdt_reg_write(change_lock, CHANGE_LOCK_1);
-	if ((wdt_reg_read(change_lock) & 0x3) != 0x1)
-		return -1;
-
-	wdt_reg_write(change_lock, CHANGE_LOCK_2);
-	if ((wdt_reg_read(change_lock) & 0x3) != 0x3)
-		return -1;
-
-	wdt_reg_write(change, initial_timer_value);
-
-	return 0;
-}
-
-static int wdt_control(unsigned long disable_value)
-{
-	wdt_reg_write(disable_lock, DISABLE_LOCK_1);
-	if ((wdt_reg_read(disable_lock) & 0x3) != 0x1)
-		return -1;
-
-	wdt_reg_write(disable_lock, DISABLE_LOCK_2);
-	if ((wdt_reg_read(disable_lock) & 0x3) != 0x2)
-		return -1;
-
-	wdt_reg_write(disable_lock, DISABLE_LOCK_3);
-	if ((wdt_reg_read(disable_lock) & 0x3) != 0x3)
-		return -1;
-
-	wdt_reg_write(disable, disable_value);
-	return 0;
-}
-
-static int wdt_set_period(unsigned long msec)
-{
-	unsigned long change_value, count_value;
-	unsigned long prescale_value = 1;
-	unsigned long refclk_khz, maxdiv;
-	int ret;
-
-	refclk_khz = clk_get_rate(TNETV107X_LPSC_WDT_ARM);
-	maxdiv = (MAX_DIV / refclk_khz);
-
-	if ((!msec) || (msec > maxdiv))
-		return -1;
-
-	count_value = refclk_khz * msec;
-	if (count_value > 0xffff) {
-		change_value = count_value / 0xffff + 1;
-		prescale_value = count_value / change_value;
-	} else {
-		change_value = count_value;
-	}
-
-	ret = write_prescale_reg(prescale_value - 1);
-	if (ret)
-		return ret;
-
-	ret = write_change_reg(change_value);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-unsigned long last_wdt = -1;
-
-int wdt_start(unsigned long msecs)
-{
-	int ret;
-	ret = wdt_control(0);
-	if (ret)
-		return ret;
-	ret = wdt_set_period(msecs);
-	if (ret)
-		return ret;
-	ret = wdt_control(1);
-	if (ret)
-		return ret;
-	ret = wdt_kick();
-	last_wdt = msecs;
-	return ret;
-}
-
-int wdt_stop(void)
-{
-	last_wdt = -1;
-	return wdt_control(0);
-}
-
-int wdt_kick(void)
-{
-	wdt_reg_write(kick_lock, KICK_LOCK_1);
-	if ((wdt_reg_read(kick_lock) & 0x3) != 0x1)
-		return -1;
-
-	wdt_reg_write(kick_lock, KICK_LOCK_2);
-	if ((wdt_reg_read(kick_lock) & 0x3) != 0x3)
-		return -1;
-
-	wdt_reg_write(kick, 1);
-	return 0;
-}
-
-void reset_cpu(ulong addr)
-{
-	clk_enable(TNETV107X_LPSC_WDT_ARM);
-	wdt_start(1);
-	wdt_kick();
-}
diff --git a/arch/arm/cpu/arm920t/s3c24x0/Makefile b/arch/arm/cpu/arm920t/s3c24x0/Makefile
index 0029700..808ab8f 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/Makefile
+++ b/arch/arm/cpu/arm920t/s3c24x0/Makefile
@@ -29,9 +29,6 @@ COBJS-$(CONFIG_USE_IRQ) += interrupts.o
 COBJS-$(CONFIG_DISPLAY_CPUINFO)	+= cpu_info.o
 COBJS-y	+= speed.o
 COBJS-y	+= timer.o
-COBJS-y	+= usb.o
-COBJS-y	+= usb_ohci.o
-
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c
deleted file mode 100644
index 226a3f6..0000000
--- a/arch/arm/cpu/arm920t/s3c24x0/usb.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * (C) Copyright 2006
- * DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && \
-    defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
-    defined(CONFIG_S3C24X0)
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/io.h>
-
-int usb_cpu_init(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
-
-	/*
-	 * Set the 48 MHz UPLL clocking. Values are taken from
-	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
-	 */
-	writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
-	/* 1 = use pads related USB for USB host */
-	writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
-
-	/*
-	 * Enable USB host clock.
-	 */
-	writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
-
-	return 0;
-}
-
-int usb_cpu_stop(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	/* may not want to do this */
-	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
-	return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
-	return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI_NEW) && \
-	   defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
-	   defined(CONFIG_S3C24X0) */
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
deleted file mode 100644
index 944bb32..0000000
--- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
+++ /dev/null
@@ -1,1757 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the S3C2400.
- *
- * (C) Copyright 2003
- * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
- *
- * Note: Much of this code has been derived from Linux 2.4
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - this driver is intended for use with USB Mass Storage Devices
- *     (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- */
-
-#include <common.h>
-/* #include <pci.h> no PCI on the S3C24X0 */
-
-#if defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0)
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/io.h>
-#include <malloc.h>
-#include <usb.h>
-#include "usb_ohci.h"
-
-#define OHCI_USE_NPS		/* force NoPowerSwitching mode */
-#undef OHCI_VERBOSE_DEBUG	/* not always helpful */
-
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define	OHCI_CONTROL_INIT \
-	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-#define min_t(type, x, y) \
-	({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
-#undef DEBUG
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#undef SHOW_INFO
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
-
-/* global struct ohci */
-static struct ohci gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* urb_priv */
-struct urb_priv urb_priv;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-/* flag guarding URB transation */
-int urb_finished = 0;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect.  AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
-	u32 temp = readl (&hc->regs->roothub.register); \
-	if (hc->flags & OHCI_QUIRK_AMD756) \
-		while (temp & mask) \
-			temp = readl (&hc->regs->roothub.register); \
-	temp; })
-
-static u32 roothub_a(struct ohci *hc)
-{
-	return read_roothub(hc, a, 0xfc0fe000);
-}
-static inline u32 roothub_b(struct ohci *hc)
-{
-	return readl(&hc->regs->roothub.b);
-}
-static inline u32 roothub_status(struct ohci *hc)
-{
-	return readl(&hc->regs->roothub.status);
-}
-static u32 roothub_portstatus(struct ohci *hc, int i)
-{
-	return read_roothub(hc, portstatus[i], 0xffe0fce0);
-}
-
-/* forward declaration */
-static int hc_interrupt(void);
-static void td_submit_job(struct usb_device *dev, unsigned long pipe,
-			  void *buffer, int transfer_len,
-			  struct devrequest *setup, struct urb_priv *urb,
-			  int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv(struct urb_priv *urb)
-{
-	int i;
-	int last;
-	struct td *td;
-
-	last = urb->length - 1;
-	if (last >= 0) {
-		for (i = 0; i <= last; i++) {
-			td = urb->td[i];
-			if (td) {
-				td->usb_dev = NULL;
-				urb->td[i] = NULL;
-			}
-		}
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number(struct usb_device *dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print(struct usb_device *dev, unsigned long pipe, void *buffer,
-		      int transfer_len, struct devrequest *setup, char *str,
-		      int small)
-{
-	struct urb_priv *purb = &urb_priv;
-
-	dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
-	    str,
-	    sohci_get_current_frame_number(dev),
-	    usb_pipedevice(pipe),
-	    usb_pipeendpoint(pipe),
-	    usb_pipeout(pipe) ? 'O' : 'I',
-	    usb_pipetype(pipe) < 2 ?
-		(usb_pipeint(pipe) ? "INTR" : "ISOC") :
-		(usb_pipecontrol(pipe) ? "CTRL" : "BULK"),
-	    purb->actual_length, transfer_len, dev->status);
-#ifdef	OHCI_VERBOSE_DEBUG
-	if (!small) {
-		int i, len;
-
-		if (usb_pipecontrol(pipe)) {
-			printf(__FILE__ ": cmd(8):");
-			for (i = 0; i < 8; i++)
-				printf(" %02x", ((__u8 *) setup)[i]);
-			printf("\n");
-		}
-		if (transfer_len > 0 && buffer) {
-			printf(__FILE__ ": data(%d/%d):",
-			       purb->actual_length, transfer_len);
-			len = usb_pipeout(pipe) ?
-			    transfer_len : purb->actual_length;
-			for (i = 0; i < 16 && i < len; i++)
-				printf(" %02x", ((__u8 *) buffer)[i]);
-			printf("%s\n", i < len ? "..." : "");
-		}
-	}
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the
-   int ed tree inclusive iso eds*/
-void ep_print_int_eds(struct ohci *ohci, char *str)
-{
-	int i, j;
-	__u32 *ed_p;
-	for (i = 0; i < 32; i++) {
-		j = 5;
-		ed_p = &(ohci->hcca->int_table[i]);
-		if (*ed_p == 0)
-			continue;
-		printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
-		while (*ed_p != 0 && j--) {
-			struct ed *ed = (struct ed *) m32_swap(ed_p);
-			printf(" ed: %4x;", ed->hwINFO);
-			ed_p = &ed->hwNextED;
-		}
-		printf("\n");
-	}
-}
-
-static void ohci_dump_intr_mask(char *label, __u32 mask)
-{
-	dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
-	    label,
-	    mask,
-	    (mask & OHCI_INTR_MIE) ? " MIE" : "",
-	    (mask & OHCI_INTR_OC) ? " OC" : "",
-	    (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
-	    (mask & OHCI_INTR_FNO) ? " FNO" : "",
-	    (mask & OHCI_INTR_UE) ? " UE" : "",
-	    (mask & OHCI_INTR_RD) ? " RD" : "",
-	    (mask & OHCI_INTR_SF) ? " SF" : "",
-	    (mask & OHCI_INTR_WDH) ? " WDH" : "",
-	    (mask & OHCI_INTR_SO) ? " SO" : "");
-}
-
-static void maybe_print_eds(char *label, __u32 value)
-{
-	struct ed *edp = (struct ed *) value;
-
-	if (value) {
-		dbg("%s %08x", label, value);
-		dbg("%08x", edp->hwINFO);
-		dbg("%08x", edp->hwTailP);
-		dbg("%08x", edp->hwHeadP);
-		dbg("%08x", edp->hwNextED);
-	}
-}
-
-static char *hcfs2string(int state)
-{
-	switch (state) {
-	case OHCI_USB_RESET:
-		return "reset";
-	case OHCI_USB_RESUME:
-		return "resume";
-	case OHCI_USB_OPER:
-		return "operational";
-	case OHCI_USB_SUSPEND:
-		return "suspend";
-	}
-	return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status(struct ohci *controller)
-{
-	struct ohci_regs *regs = controller->regs;
-	__u32 temp;
-
-	temp = readl(&regs->revision) & 0xff;
-	if (temp != 0x10)
-		dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
-	temp = readl(&regs->control);
-	dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
-	    (temp & OHCI_CTRL_RWE) ? " RWE" : "",
-	    (temp & OHCI_CTRL_RWC) ? " RWC" : "",
-	    (temp & OHCI_CTRL_IR) ? " IR" : "",
-	    hcfs2string(temp & OHCI_CTRL_HCFS),
-	    (temp & OHCI_CTRL_BLE) ? " BLE" : "",
-	    (temp & OHCI_CTRL_CLE) ? " CLE" : "",
-	    (temp & OHCI_CTRL_IE) ? " IE" : "",
-	    (temp & OHCI_CTRL_PLE) ? " PLE" : "", temp & OHCI_CTRL_CBSR);
-
-	temp = readl(&regs->cmdstatus);
-	dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
-	    (temp & OHCI_SOC) >> 16,
-	    (temp & OHCI_OCR) ? " OCR" : "",
-	    (temp & OHCI_BLF) ? " BLF" : "",
-	    (temp & OHCI_CLF) ? " CLF" : "", (temp & OHCI_HCR) ? " HCR" : "");
-
-	ohci_dump_intr_mask("intrstatus", readl(&regs->intrstatus));
-	ohci_dump_intr_mask("intrenable", readl(&regs->intrenable));
-
-	maybe_print_eds("ed_periodcurrent", readl(&regs->ed_periodcurrent));
-
-	maybe_print_eds("ed_controlhead", readl(&regs->ed_controlhead));
-	maybe_print_eds("ed_controlcurrent", readl(&regs->ed_controlcurrent));
-
-	maybe_print_eds("ed_bulkhead", readl(&regs->ed_bulkhead));
-	maybe_print_eds("ed_bulkcurrent", readl(&regs->ed_bulkcurrent));
-
-	maybe_print_eds("donehead", readl(&regs->donehead));
-}
-
-static void ohci_dump_roothub(struct ohci *controller, int verbose)
-{
-	__u32 temp, ndp, i;
-
-	temp = roothub_a(controller);
-	ndp = (temp & RH_A_NDP);
-
-	if (verbose) {
-		dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
-		    ((temp & RH_A_POTPGT) >> 24) & 0xff,
-		    (temp & RH_A_NOCP) ? " NOCP" : "",
-		    (temp & RH_A_OCPM) ? " OCPM" : "",
-		    (temp & RH_A_DT) ? " DT" : "",
-		    (temp & RH_A_NPS) ? " NPS" : "",
-		    (temp & RH_A_PSM) ? " PSM" : "", ndp);
-		temp = roothub_b(controller);
-		dbg("roothub.b: %08x PPCM=%04x DR=%04x",
-		    temp, (temp & RH_B_PPCM) >> 16, (temp & RH_B_DR)
-		    );
-		temp = roothub_status(controller);
-		dbg("roothub.status: %08x%s%s%s%s%s%s",
-		    temp,
-		    (temp & RH_HS_CRWE) ? " CRWE" : "",
-		    (temp & RH_HS_OCIC) ? " OCIC" : "",
-		    (temp & RH_HS_LPSC) ? " LPSC" : "",
-		    (temp & RH_HS_DRWE) ? " DRWE" : "",
-		    (temp & RH_HS_OCI) ? " OCI" : "",
-		    (temp & RH_HS_LPS) ? " LPS" : "");
-	}
-
-	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus(controller, i);
-		dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
-		    i,
-		    temp,
-		    (temp & RH_PS_PRSC) ? " PRSC" : "",
-		    (temp & RH_PS_OCIC) ? " OCIC" : "",
-		    (temp & RH_PS_PSSC) ? " PSSC" : "",
-		    (temp & RH_PS_PESC) ? " PESC" : "",
-		    (temp & RH_PS_CSC) ? " CSC" : "",
-		    (temp & RH_PS_LSDA) ? " LSDA" : "",
-		    (temp & RH_PS_PPS) ? " PPS" : "",
-		    (temp & RH_PS_PRS) ? " PRS" : "",
-		    (temp & RH_PS_POCI) ? " POCI" : "",
-		    (temp & RH_PS_PSS) ? " PSS" : "",
-		    (temp & RH_PS_PES) ? " PES" : "",
-		    (temp & RH_PS_CCS) ? " CCS" : "");
-	}
-}
-
-static void ohci_dump(struct ohci *controller, int verbose)
-{
-	dbg("OHCI controller usb-%s state", controller->slot_name);
-
-	/* dumps some of the state we know about */
-	ohci_dump_status(controller);
-	if (verbose)
-		ep_print_int_eds(controller, "hcca");
-	dbg("hcca frame #%04x", controller->hcca->frame_no);
-	ohci_dump_roothub(controller, 1);
-}
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
-		     int transfer_len, struct devrequest *setup, int interval)
-{
-	struct ohci *ohci;
-	struct ed *ed;
-	struct urb_priv *purb_priv;
-	int i, size = 0;
-
-	ohci = &gohci;
-
-	/* when controller's hung, permit only roothub cleanup attempts
-	 * such as powering down ports */
-	if (ohci->disabled) {
-		err("sohci_submit_job: EPIPE");
-		return -1;
-	}
-
-	/* if we have an unfinished URB from previous transaction let's
-	 * fail and scream as quickly as possible so as not to corrupt
-	 * further communication */
-	if (!urb_finished) {
-		err("sohci_submit_job: URB NOT FINISHED");
-		return -1;
-	}
-	/* we're about to begin a new transaction here
-	   so mark the URB unfinished */
-	urb_finished = 0;
-
-	/* every endpoint has a ed, locate and fill it */
-	ed = ep_add_ed(dev, pipe);
-	if (!ed) {
-		err("sohci_submit_job: ENOMEM");
-		return -1;
-	}
-
-	/* for the private part of the URB we need the number of TDs (size) */
-	switch (usb_pipetype(pipe)) {
-	case PIPE_BULK:
-		/* one TD for every 4096 Byte */
-		size = (transfer_len - 1) / 4096 + 1;
-		break;
-	case PIPE_CONTROL:
-		/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
-		size = (transfer_len == 0) ? 2 : (transfer_len - 1) / 4096 + 3;
-		break;
-	}
-
-	if (size >= (N_URB_TD - 1)) {
-		err("need %d TDs, only have %d", size, N_URB_TD);
-		return -1;
-	}
-	purb_priv = &urb_priv;
-	purb_priv->pipe = pipe;
-
-	/* fill the private part of the URB */
-	purb_priv->length = size;
-	purb_priv->ed = ed;
-	purb_priv->actual_length = 0;
-
-	/* allocate the TDs */
-	/* note that td[0] was allocated in ep_add_ed */
-	for (i = 0; i < size; i++) {
-		purb_priv->td[i] = td_alloc(dev);
-		if (!purb_priv->td[i]) {
-			purb_priv->length = i;
-			urb_free_priv(purb_priv);
-			err("sohci_submit_job: ENOMEM");
-			return -1;
-		}
-	}
-
-	if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
-		urb_free_priv(purb_priv);
-		err("sohci_submit_job: EINVAL");
-		return -1;
-	}
-
-	/* link the ed into a chain if is not already */
-	if (ed->state != ED_OPER)
-		ep_link(ohci, ed);
-
-	/* fill the TDs and link it to the ed */
-	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv,
-		      interval);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number(struct usb_device *usb_dev)
-{
-	struct ohci *ohci = &gohci;
-
-	return m16_swap(ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link(struct ohci *ohci, struct ed *edi)
-{
-	struct ed *ed = edi;
-
-	ed->state = ED_OPER;
-
-	switch (ed->type) {
-	case PIPE_CONTROL:
-		ed->hwNextED = 0;
-		if (ohci->ed_controltail == NULL) {
-			writel((u32)ed, &ohci->regs->ed_controlhead);
-		} else {
-			ohci->ed_controltail->hwNextED = (__u32) m32_swap(ed);
-		}
-		ed->ed_prev = ohci->ed_controltail;
-		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
-		    !ohci->ed_rm_list[1] && !ohci->sleeping) {
-			ohci->hc_control |= OHCI_CTRL_CLE;
-			writel(ohci->hc_control, &ohci->regs->control);
-		}
-		ohci->ed_controltail = edi;
-		break;
-
-	case PIPE_BULK:
-		ed->hwNextED = 0;
-		if (ohci->ed_bulktail == NULL) {
-			writel((u32)ed, &ohci->regs->ed_bulkhead);
-		} else {
-			ohci->ed_bulktail->hwNextED = (__u32) m32_swap(ed);
-		}
-		ed->ed_prev = ohci->ed_bulktail;
-		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
-		    !ohci->ed_rm_list[1] && !ohci->sleeping) {
-			ohci->hc_control |= OHCI_CTRL_BLE;
-			writel(ohci->hc_control, &ohci->regs->control);
-		}
-		ohci->ed_bulktail = edi;
-		break;
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink(struct ohci *ohci, struct ed *ed)
-{
-	struct ed *next;
-	ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
-
-	switch (ed->type) {
-	case PIPE_CONTROL:
-		if (ed->ed_prev == NULL) {
-			if (!ed->hwNextED) {
-				ohci->hc_control &= ~OHCI_CTRL_CLE;
-				writel(ohci->hc_control, &ohci->regs->control);
-			}
-			writel(m32_swap(*((__u32 *) &ed->hwNextED)),
-			       &ohci->regs->ed_controlhead);
-		} else {
-			ed->ed_prev->hwNextED = ed->hwNextED;
-		}
-		if (ohci->ed_controltail == ed) {
-			ohci->ed_controltail = ed->ed_prev;
-		} else {
-			next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
-			next->ed_prev = ed->ed_prev;
-		}
-		break;
-
-	case PIPE_BULK:
-		if (ed->ed_prev == NULL) {
-			if (!ed->hwNextED) {
-				ohci->hc_control &= ~OHCI_CTRL_BLE;
-				writel(ohci->hc_control, &ohci->regs->control);
-			}
-			writel(m32_swap(*((__u32 *) &ed->hwNextED)),
-			       &ohci->regs->ed_bulkhead);
-		} else {
-			ed->ed_prev->hwNextED = ed->hwNextED;
-		}
-		if (ohci->ed_bulktail == ed) {
-			ohci->ed_bulktail = ed->ed_prev;
-		} else {
-			next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
-			next->ed_prev = ed->ed_prev;
-		}
-		break;
-	}
-	ed->state = ED_UNLINK;
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration
- * command, but the USB stack is a little bit stateless  so we do it at every
- * transaction. If the state of the ed is ED_NEW then a dummy td is added and
- * the state is changed to ED_UNLINK. In all other cases the state is left
- * unchanged. The ed info fields are setted anyway even though most of them
- * should not change */
-
-static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe)
-{
-	struct td *td;
-	struct ed *ed_ret;
-	struct ed *ed;
-
-	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
-				   (usb_pipecontrol(pipe) ? 0 :
-				    usb_pipeout(pipe))];
-
-	if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
-		err("ep_add_ed: pending delete");
-		/* pending delete request */
-		return NULL;
-	}
-
-	if (ed->state == ED_NEW) {
-		ed->hwINFO = m32_swap(OHCI_ED_SKIP);	/* skip ed */
-		/* dummy td; end of td list for ed */
-		td = td_alloc(usb_dev);
-		ed->hwTailP = (__u32) m32_swap(td);
-		ed->hwHeadP = ed->hwTailP;
-		ed->state = ED_UNLINK;
-		ed->type = usb_pipetype(pipe);
-		ohci_dev.ed_cnt++;
-	}
-
-	ed->hwINFO = m32_swap(usb_pipedevice(pipe)
-			      | usb_pipeendpoint(pipe) << 7
-			      | (usb_pipeisoc(pipe) ? 0x8000 : 0)
-			      | (usb_pipecontrol(pipe) ? 0 :
-				 (usb_pipeout(pipe) ? 0x800 : 0x1000))
-			      | usb_pipeslow(pipe) << 13 |
-			      usb_maxpacket(usb_dev, pipe) << 16);
-
-	return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill(struct ohci *ohci, unsigned int info, void *data, int len,
-		    struct usb_device *dev, int index,
-		    struct urb_priv *urb_priv)
-{
-	struct td *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
-	int i;
-#endif
-
-	if (index > urb_priv->length) {
-		err("index > length");
-		return;
-	}
-	/* use this td as the next dummy */
-	td_pt = urb_priv->td[index];
-	td_pt->hwNextTD = 0;
-
-	/* fill the old dummy TD */
-	td = urb_priv->td[index] =
-	    (struct td *) (m32_swap(urb_priv->ed->hwTailP) & ~0xf);
-
-	td->ed = urb_priv->ed;
-	td->next_dl_td = NULL;
-	td->index = index;
-	td->data = (__u32) data;
-#ifdef OHCI_FILL_TRACE
-	if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
-		for (i = 0; i < len; i++)
-			printf("td->data[%d] %#2x ", i,
-			       ((unsigned char *)td->data)[i]);
-		printf("\n");
-	}
-#endif
-	if (!len)
-		data = 0;
-
-	td->hwINFO = (__u32) m32_swap(info);
-	td->hwCBP = (__u32) m32_swap(data);
-	if (data)
-		td->hwBE = (__u32) m32_swap(data + len - 1);
-	else
-		td->hwBE = 0;
-	td->hwNextTD = (__u32) m32_swap(td_pt);
-
-	/* append to queue */
-	td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-
-static void td_submit_job(struct usb_device *dev, unsigned long pipe,
-			  void *buffer, int transfer_len,
-			  struct devrequest *setup, struct urb_priv *urb,
-			  int interval)
-{
-	struct ohci *ohci = &gohci;
-	int data_len = transfer_len;
-	void *data;
-	int cnt = 0;
-	__u32 info = 0;
-	unsigned int toggle = 0;
-
-	/* OHCI handles the DATA-toggles itself, we just
-	   use the USB-toggle bits for reseting */
-	if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
-		toggle = TD_T_TOGGLE;
-	} else {
-		toggle = TD_T_DATA0;
-		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe),
-			      1);
-	}
-	urb->td_cnt = 0;
-	if (data_len)
-		data = buffer;
-	else
-		data = 0;
-
-	switch (usb_pipetype(pipe)) {
-	case PIPE_BULK:
-		info = usb_pipeout(pipe) ? TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN;
-		while (data_len > 4096) {
-			td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
-				4096, dev, cnt, urb);
-			data += 4096;
-			data_len -= 4096;
-			cnt++;
-		}
-		info = usb_pipeout(pipe) ?
-				TD_CC | TD_DP_OUT :
-				TD_CC | TD_R | TD_DP_IN;
-		td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
-			data_len, dev, cnt, urb);
-		cnt++;
-
-		if (!ohci->sleeping)
-			/* start bulk list */
-			writel(OHCI_BLF, &ohci->regs->cmdstatus);
-		break;
-
-	case PIPE_CONTROL:
-		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
-		td_fill(ohci, info, setup, 8, dev, cnt++, urb);
-		if (data_len > 0) {
-			info = usb_pipeout(pipe) ?
-			    TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
-			    TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
-			/* NOTE:  mishandles transfers >8K, some >4K */
-			td_fill(ohci, info, data, data_len, dev, cnt++, urb);
-		}
-		info = usb_pipeout(pipe) ?
-		    TD_CC | TD_DP_IN | TD_T_DATA1 :
-		    TD_CC | TD_DP_OUT | TD_T_DATA1;
-		td_fill(ohci, info, data, 0, dev, cnt++, urb);
-		if (!ohci->sleeping)
-			/* start Control list */
-			writel(OHCI_CLF, &ohci->regs->cmdstatus);
-		break;
-	}
-	if (urb->length != cnt)
-		dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(struct td *td)
-{
-	__u32 tdBE, tdCBP;
-	struct urb_priv *lurb_priv = &urb_priv;
-
-	tdBE = m32_swap(td->hwBE);
-	tdCBP = m32_swap(td->hwCBP);
-
-	if (!(usb_pipecontrol(lurb_priv->pipe) &&
-	      ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
-		if (tdBE != 0) {
-			if (td->hwCBP == 0)
-				lurb_priv->actual_length += tdBE - td->data + 1;
-			else
-				lurb_priv->actual_length += tdCBP - td->data;
-		}
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static struct td *dl_reverse_done_list(struct ohci *ohci)
-{
-	__u32 td_list_hc;
-	__u32 tmp;
-	struct td *td_rev = NULL;
-	struct td *td_list = NULL;
-	struct urb_priv *lurb_priv = NULL;
-
-	td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
-	ohci->hcca->done_head = 0;
-
-	while (td_list_hc) {
-		td_list = (struct td *) td_list_hc;
-
-		if (TD_CC_GET(m32_swap(td_list->hwINFO))) {
-			lurb_priv = &urb_priv;
-			dbg(" USB-error/status: %x : %p",
-			    TD_CC_GET(m32_swap(td_list->hwINFO)), td_list);
-			if (td_list->ed->hwHeadP & m32_swap(0x1)) {
-				if (lurb_priv &&
-				    ((td_list->index+1) < lurb_priv->length)) {
-					tmp = lurb_priv->length - 1;
-					td_list->ed->hwHeadP =
-						(lurb_priv->td[tmp]->hwNextTD &
-						 m32_swap(0xfffffff0)) |
-						 (td_list->ed->hwHeadP &
-						  m32_swap(0x2));
-					lurb_priv->td_cnt += lurb_priv->length -
-							     td_list->index - 1;
-				} else
-					td_list->ed->hwHeadP &=
-					    m32_swap(0xfffffff2);
-			}
-		}
-
-		td_list->next_dl_td = td_rev;
-		td_rev = td_list;
-		td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
-	}
-
-	return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list(struct ohci *ohci, struct td *td_list)
-{
-	struct td *td_list_next = NULL;
-	struct ed *ed;
-	int cc = 0;
-	int stat = 0;
-	/* urb_t *urb; */
-	struct urb_priv *lurb_priv;
-	__u32 tdINFO, edHeadP, edTailP;
-
-	while (td_list) {
-		td_list_next = td_list->next_dl_td;
-
-		lurb_priv = &urb_priv;
-		tdINFO = m32_swap(td_list->hwINFO);
-
-		ed = td_list->ed;
-
-		dl_transfer_length(td_list);
-
-		/* error code of transfer */
-		cc = TD_CC_GET(tdINFO);
-		if (cc != 0) {
-			dbg("ConditionCode %#x", cc);
-			stat = cc_to_error[cc];
-		}
-
-		/* see if this done list makes for all TD's of current URB,
-		 * and mark the URB finished if so */
-		if (++(lurb_priv->td_cnt) == lurb_priv->length) {
-			if ((ed->state & (ED_OPER | ED_UNLINK)))
-				urb_finished = 1;
-			else
-				dbg("dl_done_list: strange.., ED state %x, "
-				    "ed->state\n");
-		} else
-			dbg("dl_done_list: processing TD %x, len %x\n",
-			    lurb_priv->td_cnt, lurb_priv->length);
-
-		if (ed->state != ED_NEW) {
-			edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
-			edTailP = m32_swap(ed->hwTailP);
-
-			/* unlink eds if they are not busy */
-			if ((edHeadP == edTailP) && (ed->state == ED_OPER))
-				ep_unlink(ohci, ed);
-		}
-
-		td_list = td_list_next;
-	}
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] = {
-	0x12,	/*  __u8  bLength; */
-	0x01,	/*  __u8  bDescriptorType; Device */
-	0x10,	/*  __u16 bcdUSB; v1.1 */
-	0x01,
-	0x09,	/*  __u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,	/*  __u8  bDeviceSubClass; */
-	0x00,	/*  __u8  bDeviceProtocol; */
-	0x08,	/*  __u8  bMaxPacketSize0; 8 Bytes */
-	0x00,	/*  __u16 idVendor; */
-	0x00,
-	0x00,	/*  __u16 idProduct; */
-	0x00,
-	0x00,	/*  __u16 bcdDevice; */
-	0x00,
-	0x00,	/*  __u8  iManufacturer; */
-	0x01,	/*  __u8  iProduct; */
-	0x00,	/*  __u8  iSerialNumber; */
-	0x01	/*  __u8  bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] = {
-	0x09,	/*  __u8  bLength; */
-	0x02,	/*  __u8  bDescriptorType; Configuration */
-	0x19,	/*  __u16 wTotalLength; */
-	0x00,
-	0x01,	/*  __u8  bNumInterfaces; */
-	0x01,	/*  __u8  bConfigurationValue; */
-	0x00,	/*  __u8  iConfiguration; */
-	0x40,	/*  __u8  bmAttributes;
-		   Bit 7: Bus-powered, 6: Self-powered,
-		   5 Remote-wakwup, 4..0: resvd */
-	0x00,	/*  __u8  MaxPower; */
-
-	/* interface */
-	0x09,	/*  __u8  if_bLength; */
-	0x04,	/*  __u8  if_bDescriptorType; Interface */
-	0x00,	/*  __u8  if_bInterfaceNumber; */
-	0x00,	/*  __u8  if_bAlternateSetting; */
-	0x01,	/*  __u8  if_bNumEndpoints; */
-	0x09,	/*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
-	0x00,	/*  __u8  if_bInterfaceSubClass; */
-	0x00,	/*  __u8  if_bInterfaceProtocol; */
-	0x00,	/*  __u8  if_iInterface; */
-
-	/* endpoint */
-	0x07,	/*  __u8  ep_bLength; */
-	0x05,	/*  __u8  ep_bDescriptorType; Endpoint */
-	0x81,	/*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
-	0x03,	/*  __u8  ep_bmAttributes; Interrupt */
-	0x02,	/*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
-	0x00,
-	0xff	/*  __u8  ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] = {
-	0x04,	/*  __u8  bLength; */
-	0x03,	/*  __u8  bDescriptorType; String-descriptor */
-	0x09,	/*  __u8  lang ID */
-	0x04,	/*  __u8  lang ID */
-};
-
-static unsigned char root_hub_str_index1[] = {
-	28,	/*  __u8  bLength; */
-	0x03,	/*  __u8  bDescriptorType; String-descriptor */
-	'O',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'H',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'C',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'I',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	' ',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'R',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'o',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'o',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	't',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	' ',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'H',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'u',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'b',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x)			len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x) \
-{ \
-	info("WR:status %#8x", (x)); \
-	writel((x), &gohci.regs->roothub.status); \
-}
-#define WR_RH_PORTSTAT(x) \
-{ \
-	info("WR:portstatus[%d] %#8x", wIndex-1, (x)); \
-	writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); \
-}
-#else
-#define WR_RH_STAT(x) \
-	writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x)\
-	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT	roothub_status(&gohci)
-#define RD_RH_PORTSTAT	roothub_portstatus(&gohci, wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(struct ohci *controller)
-{
-	__u32 temp, ndp, i;
-	int res;
-
-	res = -1;
-	temp = roothub_a(controller);
-	ndp = (temp & RH_A_NDP);
-	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus(controller, i);
-		/* check for a device disconnect */
-		if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
-		     (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
-			res = i;
-			break;
-		}
-	}
-	return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
-			      void *buffer, int transfer_len,
-			      struct devrequest *cmd)
-{
-	void *data = buffer;
-	int leni = transfer_len;
-	int len = 0;
-	int stat = 0;
-	union {
-		__u32 word[4];
-		__u16 hword[8];
-		__u8 byte[16];
-	} datab;
-	__u8 *data_buf = datab.byte;
-	__u16 bmRType_bReq;
-	__u16 wValue;
-	__u16 wIndex;
-	__u16 wLength;
-
-#ifdef DEBUG
-	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)",
-		  usb_pipein(pipe));
-#else
-	mdelay(1);
-#endif
-	if (usb_pipeint(pipe)) {
-		info("Root-Hub submit IRQ: NOT implemented");
-		return 0;
-	}
-
-	bmRType_bReq = cmd->requesttype | (cmd->request << 8);
-	wValue = m16_swap(cmd->value);
-	wIndex = m16_swap(cmd->index);
-	wLength = m16_swap(cmd->length);
-
-	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
-	     dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
-	switch (bmRType_bReq) {
-		/* Request Destination:
-		   without flags: Device,
-		   RH_INTERFACE: interface,
-		   RH_ENDPOINT: endpoint,
-		   RH_CLASS means HUB here,
-		   RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
-		 */
-
-	case RH_GET_STATUS:
-		datab.hword[0] = m16_swap(1);
-		OK(2);
-	case RH_GET_STATUS | RH_INTERFACE:
-		datab.hword[0] = m16_swap(0);
-		OK(2);
-	case RH_GET_STATUS | RH_ENDPOINT:
-		datab.hword[0] = m16_swap(0);
-		OK(2);
-	case RH_GET_STATUS | RH_CLASS:
-		datab.word[0] =
-		    m32_swap(RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
-		OK(4);
-	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-		datab.word[0] = m32_swap(RD_RH_PORTSTAT);
-		OK(4);
-
-	case RH_CLEAR_FEATURE | RH_ENDPOINT:
-		switch (wValue) {
-		case (RH_ENDPOINT_STALL):
-			OK(0);
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_CLASS:
-		switch (wValue) {
-		case RH_C_HUB_LOCAL_POWER:
-			OK(0);
-		case (RH_C_HUB_OVER_CURRENT):
-			WR_RH_STAT(RH_HS_OCIC);
-			OK(0);
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
-		switch (wValue) {
-		case (RH_PORT_ENABLE):
-			WR_RH_PORTSTAT(RH_PS_CCS);
-			OK(0);
-		case (RH_PORT_SUSPEND):
-			WR_RH_PORTSTAT(RH_PS_POCI);
-			OK(0);
-		case (RH_PORT_POWER):
-			WR_RH_PORTSTAT(RH_PS_LSDA);
-			OK(0);
-		case (RH_C_PORT_CONNECTION):
-			WR_RH_PORTSTAT(RH_PS_CSC);
-			OK(0);
-		case (RH_C_PORT_ENABLE):
-			WR_RH_PORTSTAT(RH_PS_PESC);
-			OK(0);
-		case (RH_C_PORT_SUSPEND):
-			WR_RH_PORTSTAT(RH_PS_PSSC);
-			OK(0);
-		case (RH_C_PORT_OVER_CURRENT):
-			WR_RH_PORTSTAT(RH_PS_OCIC);
-			OK(0);
-		case (RH_C_PORT_RESET):
-			WR_RH_PORTSTAT(RH_PS_PRSC);
-			OK(0);
-		}
-		break;
-
-	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
-		switch (wValue) {
-		case (RH_PORT_SUSPEND):
-			WR_RH_PORTSTAT(RH_PS_PSS);
-			OK(0);
-		case (RH_PORT_RESET):	/* BUG IN HUP CODE ******** */
-			if (RD_RH_PORTSTAT & RH_PS_CCS)
-				WR_RH_PORTSTAT(RH_PS_PRS);
-			OK(0);
-		case (RH_PORT_POWER):
-			WR_RH_PORTSTAT(RH_PS_PPS);
-			OK(0);
-		case (RH_PORT_ENABLE):	/* BUG IN HUP CODE ******** */
-			if (RD_RH_PORTSTAT & RH_PS_CCS)
-				WR_RH_PORTSTAT(RH_PS_PES);
-			OK(0);
-		}
-		break;
-
-	case RH_SET_ADDRESS:
-		gohci.rh.devnum = wValue;
-		OK(0);
-
-	case RH_GET_DESCRIPTOR:
-		switch ((wValue & 0xff00) >> 8) {
-		case (0x01):	/* device descriptor */
-			len = min_t(unsigned int,
-				    leni,
-				    min_t(unsigned int,
-					  sizeof(root_hub_dev_des), wLength));
-			data_buf = root_hub_dev_des;
-			OK(len);
-		case (0x02):	/* configuration descriptor */
-			len = min_t(unsigned int,
-				    leni,
-				    min_t(unsigned int,
-					  sizeof(root_hub_config_des),
-					  wLength));
-			data_buf = root_hub_config_des;
-			OK(len);
-		case (0x03):	/* string descriptors */
-			if (wValue == 0x0300) {
-				len = min_t(unsigned int,
-					    leni,
-					    min_t(unsigned int,
-						  sizeof(root_hub_str_index0),
-						  wLength));
-				data_buf = root_hub_str_index0;
-				OK(len);
-			}
-			if (wValue == 0x0301) {
-				len = min_t(unsigned int,
-					    leni,
-					    min_t(unsigned int,
-						  sizeof(root_hub_str_index1),
-						  wLength));
-				data_buf = root_hub_str_index1;
-				OK(len);
-			}
-		default:
-			stat = USB_ST_STALLED;
-		}
-		break;
-
-	case RH_GET_DESCRIPTOR | RH_CLASS:
-		{
-			__u32 temp = roothub_a(&gohci);
-
-			data_buf[0] = 9;	/* min length; */
-			data_buf[1] = 0x29;
-			data_buf[2] = temp & RH_A_NDP;
-			data_buf[3] = 0;
-			if (temp & RH_A_PSM)
-				/* per-port power switching? */
-				data_buf[3] |= 0x1;
-			if (temp & RH_A_NOCP)
-				/* no overcurrent reporting? */
-				data_buf[3] |= 0x10;
-			else if (temp & RH_A_OCPM)
-				/* per-port overcurrent reporting? */
-				data_buf[3] |= 0x8;
-
-			/* corresponds to data_buf[4-7] */
-			datab.word[1] = 0;
-			data_buf[5] = (temp & RH_A_POTPGT) >> 24;
-			temp = roothub_b(&gohci);
-			data_buf[7] = temp & RH_B_DR;
-			if (data_buf[2] < 7) {
-				data_buf[8] = 0xff;
-			} else {
-				data_buf[0] += 2;
-				data_buf[8] = (temp & RH_B_DR) >> 8;
-				data_buf[10] = data_buf[9] = 0xff;
-			}
-
-			len = min_t(unsigned int, leni,
-				    min_t(unsigned int, data_buf[0], wLength));
-			OK(len);
-		}
-
-	case RH_GET_CONFIGURATION:
-		*(__u8 *) data_buf = 0x01;
-		OK(1);
-
-	case RH_SET_CONFIGURATION:
-		WR_RH_STAT(0x10000);
-		OK(0);
-
-	default:
-		dbg("unsupported root hub command");
-		stat = USB_ST_STALLED;
-	}
-
-#ifdef	DEBUG
-	ohci_dump_roothub(&gohci, 1);
-#else
-	mdelay(1);
-#endif
-
-	len = min_t(int, len, leni);
-	if (data != data_buf)
-		memcpy(data, data_buf, len);
-	dev->act_len = len;
-	dev->status = stat;
-
-#ifdef DEBUG
-	if (transfer_len)
-		urb_priv.actual_length = transfer_len;
-	pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)",
-		  0 /*usb_pipein(pipe) */);
-#else
-	mdelay(1);
-#endif
-
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		      int transfer_len, struct devrequest *setup, int interval)
-{
-	int stat = 0;
-	int maxsize = usb_maxpacket(dev, pipe);
-	int timeout;
-
-	/* device pulled? Shortcut the action. */
-	if (devgone == dev) {
-		dev->status = USB_ST_CRC_ERR;
-		return 0;
-	}
-#ifdef DEBUG
-	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
-		  usb_pipein(pipe));
-#else
-	mdelay(1);
-#endif
-	if (!maxsize) {
-		err("submit_common_message: pipesize for pipe %lx is zero",
-		    pipe);
-		return -1;
-	}
-
-	if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) <
-	    0) {
-		err("sohci_submit_job failed");
-		return -1;
-	}
-
-	mdelay(10);
-	/* ohci_dump_status(&gohci); */
-
-	/* allow more time for a BULK device to react - some are slow */
-#define BULK_TO	 5000		/* timeout in milliseconds */
-	if (usb_pipebulk(pipe))
-		timeout = BULK_TO;
-	else
-		timeout = 100;
-
-	/* wait for it to complete */
-	for (;;) {
-		/* check whether the controller is done */
-		stat = hc_interrupt();
-
-		if (stat < 0) {
-			stat = USB_ST_CRC_ERR;
-			break;
-		}
-
-		/* NOTE: since we are not interrupt driven in U-Boot and always
-		 * handle only one URB at a time, we cannot assume the
-		 * transaction finished on the first successful return from
-		 * hc_interrupt().. unless the flag for current URB is set,
-		 * meaning that all TD's to/from device got actually
-		 * transferred and processed. If the current URB is not
-		 * finished we need to re-iterate this loop so as
-		 * hc_interrupt() gets called again as there needs to be some
-		 * more TD's to process still */
-		if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
-			/* 0xff is returned for an SF-interrupt */
-			break;
-		}
-
-		if (--timeout) {
-			mdelay(1);
-			if (!urb_finished)
-				dbg("\%");
-
-		} else {
-			err("CTL:TIMEOUT ");
-			dbg("submit_common_msg: TO status %x\n", stat);
-			stat = USB_ST_CRC_ERR;
-			urb_finished = 1;
-			break;
-		}
-	}
-
-#if 0
-	/* we got an Root Hub Status Change interrupt */
-	if (got_rhsc) {
-#ifdef DEBUG
-		ohci_dump_roothub(&gohci, 1);
-#endif
-		got_rhsc = 0;
-		/* abuse timeout */
-		timeout = rh_check_port_status(&gohci);
-		if (timeout >= 0) {
-#if 0			/* this does nothing useful, but leave it here
-			   in case that changes */
-			/* the called routine adds 1 to the passed value */
-			usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
-			/*
-			 * XXX
-			 * This is potentially dangerous because it assumes
-			 * that only one device is ever plugged in!
-			 */
-			devgone = dev;
-		}
-	}
-#endif
-
-	dev->status = stat;
-	dev->act_len = transfer_len;
-
-#ifdef DEBUG
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)",
-		  usb_pipein(pipe));
-#else
-	mdelay(1);
-#endif
-
-	/* free TDs in urb_priv */
-	urb_free_priv(&urb_priv);
-	return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		    int transfer_len)
-{
-	info("submit_bulk_msg");
-	return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		       int transfer_len, struct devrequest *setup)
-{
-	int maxsize = usb_maxpacket(dev, pipe);
-
-	info("submit_control_msg");
-#ifdef DEBUG
-	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
-		  usb_pipein(pipe));
-#else
-	mdelay(1);
-#endif
-	if (!maxsize) {
-		err("submit_control_message: pipesize for pipe %lx is zero",
-		    pipe);
-		return -1;
-	}
-	if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
-		gohci.rh.dev = dev;
-		/* root hub - redirect */
-		return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
-					  setup);
-	}
-
-	return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		   int transfer_len, int interval)
-{
-	info("submit_int_msg");
-	return -1;
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset(struct ohci *ohci)
-{
-	int timeout = 30;
-	int smm_timeout = 50;	/* 0,5 sec */
-
-	if (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
-		/* SMM owns the HC - request ownership */
-		writel(OHCI_OCR, &ohci->regs->cmdstatus);
-		info("USB HC TakeOver from SMM");
-		while (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
-			mdelay(10);
-			if (--smm_timeout == 0) {
-				err("USB HC TakeOver failed!");
-				return -1;
-			}
-		}
-	}
-
-	/* Disable HC interrupts */
-	writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
-	dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
-	    ohci->slot_name, readl(&ohci->regs->control));
-
-	/* Reset USB (needed by some controllers) */
-	writel(0, &ohci->regs->control);
-
-	/* HC Reset requires max 10 us delay */
-	writel(OHCI_HCR, &ohci->regs->cmdstatus);
-	while ((readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
-		if (--timeout == 0) {
-			err("USB HC reset timed out!");
-			return -1;
-		}
-		udelay(1);
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start(struct ohci *ohci)
-{
-	__u32 mask;
-	unsigned int fminterval;
-
-	ohci->disabled = 1;
-
-	/* Tell the controller where the control and bulk lists are
-	 * The lists are empty now. */
-
-	writel(0, &ohci->regs->ed_controlhead);
-	writel(0, &ohci->regs->ed_bulkhead);
-
-	/* a reset clears this */
-	writel((__u32) ohci->hcca, &ohci->regs->hcca);
-
-	fminterval = 0x2edf;
-	writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
-	fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
-	writel(fminterval, &ohci->regs->fminterval);
-	writel(0x628, &ohci->regs->lsthresh);
-
-	/* start controller operations */
-	ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
-	ohci->disabled = 0;
-	writel(ohci->hc_control, &ohci->regs->control);
-
-	/* disable all interrupts */
-	mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
-		OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
-		OHCI_INTR_OC | OHCI_INTR_MIE);
-	writel(mask, &ohci->regs->intrdisable);
-	/* clear all interrupts */
-	mask &= ~OHCI_INTR_MIE;
-	writel(mask, &ohci->regs->intrstatus);
-	/* Choose the interrupts we care about now  - but w/o MIE */
-	mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
-	writel(mask, &ohci->regs->intrenable);
-
-#ifdef	OHCI_USE_NPS
-	/* required for AMD-756 and some Mac platforms */
-	writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
-	       &ohci->regs->roothub.a);
-	writel(RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif /* OHCI_USE_NPS */
-
-	/* POTPGT delay is bits 24-31, in 2 ms units. */
-	mdelay((roothub_a(ohci) >> 23) & 0x1fe);
-
-	/* connect the virtual root hub */
-	ohci->rh.devnum = 0;
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static int hc_interrupt(void)
-{
-	struct ohci *ohci = &gohci;
-	struct ohci_regs *regs = ohci->regs;
-	int ints;
-	int stat = -1;
-
-	if ((ohci->hcca->done_head != 0) &&
-	    !(m32_swap(ohci->hcca->done_head) & 0x01)) {
-
-		ints = OHCI_INTR_WDH;
-
-	} else {
-		ints = readl(&regs->intrstatus);
-		if (ints == ~(u32) 0) {
-			ohci->disabled++;
-			err("%s device removed!", ohci->slot_name);
-			return -1;
-		}
-		ints &= readl(&regs->intrenable);
-		if (ints == 0) {
-			dbg("hc_interrupt: returning..\n");
-			return 0xff;
-		}
-	}
-
-	/* dbg("Interrupt: %x frame: %x", ints,
-	    le16_to_cpu(ohci->hcca->frame_no)); */
-
-	if (ints & OHCI_INTR_RHSC) {
-		got_rhsc = 1;
-		stat = 0xff;
-	}
-
-	if (ints & OHCI_INTR_UE) {
-		ohci->disabled++;
-		err("OHCI Unrecoverable Error, controller usb-%s disabled",
-		    ohci->slot_name);
-		/* e.g. due to PCI Master/Target Abort */
-
-#ifdef	DEBUG
-		ohci_dump(ohci, 1);
-#else
-		mdelay(1);
-#endif
-		/* FIXME: be optimistic, hope that bug won't repeat often. */
-		/* Make some non-interrupt context restart the controller. */
-		/* Count and limit the retries though; either hardware or */
-		/* software errors can go forever... */
-		hc_reset(ohci);
-		return -1;
-	}
-
-	if (ints & OHCI_INTR_WDH) {
-		mdelay(1);
-
-		writel(OHCI_INTR_WDH, &regs->intrdisable);
-		stat = dl_done_list(&gohci, dl_reverse_done_list(&gohci));
-		writel(OHCI_INTR_WDH, &regs->intrenable);
-	}
-
-	if (ints & OHCI_INTR_SO) {
-		dbg("USB Schedule overrun\n");
-		writel(OHCI_INTR_SO, &regs->intrenable);
-		stat = -1;
-	}
-
-	/* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
-	if (ints & OHCI_INTR_SF) {
-		unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
-		mdelay(1);
-		writel(OHCI_INTR_SF, &regs->intrdisable);
-		if (ohci->ed_rm_list[frame] != NULL)
-			writel(OHCI_INTR_SF, &regs->intrenable);
-		stat = 0xff;
-	}
-
-	writel(ints, &regs->intrstatus);
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci(struct ohci *ohci)
-{
-	dbg("USB HC release ohci usb-%s", ohci->slot_name);
-
-	if (!ohci->disabled)
-		hc_reset(ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(int index, void **controller)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
-
-	/*
-	 * Set the 48 MHz UPLL clocking. Values are taken from
-	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
-	 */
-	clk_power->upllcon = ((40 << 12) + (1 << 4) + 2);
-	gpio->misccr |= 0x8;	/* 1 = use pads related USB for USB host */
-
-	/*
-	 * Enable USB host clock.
-	 */
-	clk_power->clkcon |= (1 << 4);
-
-	memset(&gohci, 0, sizeof(struct ohci));
-	memset(&urb_priv, 0, sizeof(struct urb_priv));
-
-	/* align the storage */
-	if ((__u32) &ghcca[0] & 0xff) {
-		err("HCCA not aligned!!");
-		return -1;
-	}
-	phcca = &ghcca[0];
-	info("aligned ghcca %p", phcca);
-	memset(&ohci_dev, 0, sizeof(struct ohci_device));
-	if ((__u32) &ohci_dev.ed[0] & 0x7) {
-		err("EDs not aligned!!");
-		return -1;
-	}
-	memset(gtd, 0, sizeof(struct td) * (NUM_TD + 1));
-	if ((__u32) gtd & 0x7) {
-		err("TDs not aligned!!");
-		return -1;
-	}
-	ptd = gtd;
-	gohci.hcca = phcca;
-	memset(phcca, 0, sizeof(struct ohci_hcca));
-
-	gohci.disabled = 1;
-	gohci.sleeping = 0;
-	gohci.irq = -1;
-	gohci.regs = (struct ohci_regs *)S3C24X0_USB_HOST_BASE;
-
-	gohci.flags = 0;
-	gohci.slot_name = "s3c2400";
-
-	if (hc_reset(&gohci) < 0) {
-		hc_release_ohci(&gohci);
-		/* Initialization failed */
-		clk_power->clkcon &= ~(1 << 4);
-		return -1;
-	}
-
-	/* FIXME this is a second HC reset; why?? */
-	gohci.hc_control = OHCI_USB_RESET;
-	writel(gohci.hc_control, &gohci.regs->control);
-	mdelay(10);
-
-	if (hc_start(&gohci) < 0) {
-		err("can't start usb-%s", gohci.slot_name);
-		hc_release_ohci(&gohci);
-		/* Initialization failed */
-		clk_power->clkcon &= ~(1 << 4);
-		return -1;
-	}
-#ifdef	DEBUG
-	ohci_dump(&gohci, 1);
-#else
-	mdelay(1);
-#endif
-	ohci_inited = 1;
-	urb_finished = 1;
-
-	return 0;
-}
-
-int usb_lowlevel_stop(int index)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-
-	/* this gets called really early - before the controller has */
-	/* even been initialized! */
-	if (!ohci_inited)
-		return 0;
-	/* TODO release any interrupts, etc. */
-	/* call hc_release_ohci() here ? */
-	hc_reset(&gohci);
-	/* may not want to do this */
-	clk_power->clkcon &= ~(1 << 4);
-	return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h
deleted file mode 100644
index f272d78..0000000
--- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
-	/* No  Error  */ 0,
-	/* CRC Error  */ USB_ST_CRC_ERR,
-	/* Bit Stuff  */ USB_ST_BIT_ERR,
-	/* Data Togg  */ USB_ST_CRC_ERR,
-	/* Stall      */ USB_ST_STALLED,
-	/* DevNotResp */ -1,
-	/* PIDCheck   */ USB_ST_BIT_ERR,
-	/* UnExpPID   */ USB_ST_BIT_ERR,
-	/* DataOver   */ USB_ST_BUF_ERR,
-	/* DataUnder  */ USB_ST_BUF_ERR,
-	/* reservd    */ -1,
-	/* reservd    */ -1,
-	/* BufferOver */ USB_ST_BUF_ERR,
-	/* BuffUnder  */ USB_ST_BUF_ERR,
-	/* Not Access */ -1,
-	/* Not Access */ -1
-};
-
-/* ED States */
-#define ED_NEW		0x00
-#define ED_UNLINK	0x01
-#define ED_OPER		0x02
-#define ED_DEL		0x04
-#define ED_URB_DEL	0x08
-
-/* usb_ohci_ed */
-struct ed {
-	__u32 hwINFO;
-	__u32 hwTailP;
-	__u32 hwHeadP;
-	__u32 hwNextED;
-
-	struct ed *ed_prev;
-	__u8 int_period;
-	__u8 int_branch;
-	__u8 int_load;
-	__u8 int_interval;
-	__u8 state;
-	__u8 type;
-	__u16 last_iso;
-	struct ed *ed_rm_list;
-
-	struct usb_device *usb_dev;
-	__u32 unused[3];
-} __attribute__ ((aligned(16)));
-
-/* TD info field */
-#define TD_CC			0xf0000000
-#define TD_CC_GET(td_p)		(((td_p) >> 28) & 0x0f)
-#define TD_CC_SET(td_p, cc) \
-	{(td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)}
-#define TD_EC			0x0C000000
-#define TD_T			0x03000000
-#define TD_T_DATA0		0x02000000
-#define TD_T_DATA1		0x03000000
-#define TD_T_TOGGLE		0x00000000
-#define TD_R			0x00040000
-#define TD_DI			0x00E00000
-#define TD_DI_SET(X)		(((X) & 0x07)<< 21)
-#define TD_DP			0x00180000
-#define TD_DP_SETUP		0x00000000
-#define TD_DP_IN		0x00100000
-#define TD_DP_OUT		0x00080000
-
-#define TD_ISO			0x00010000
-#define TD_DEL			0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR		0x00
-#define TD_CC_CRC		0x01
-#define TD_CC_BITSTUFFING	0x02
-#define TD_CC_DATATOGGLEM	0x03
-#define TD_CC_STALL		0x04
-#define TD_DEVNOTRESP		0x05
-#define TD_PIDCHECKFAIL	0x06
-#define TD_UNEXPECTEDPID	0x07
-#define TD_DATAOVERRUN		0x08
-#define TD_DATAUNDERRUN	0x09
-#define TD_BUFFEROVERRUN	0x0C
-#define TD_BUFFERUNDERRUN	0x0D
-#define TD_NOTACCESSED		0x0F
-
-
-#define MAXPSW 1
-
-struct td {
-	__u32 hwINFO;
-	__u32 hwCBP;		/* Current Buffer Pointer */
-	__u32 hwNextTD;		/* Next TD Pointer */
-	__u32 hwBE;		/* Memory Buffer End Pointer */
-
-	__u8 unused;
-	__u8 index;
-	struct ed *ed;
-	struct td *next_dl_td;
-	struct usb_device *usb_dev;
-	int transfer_len;
-	__u32 data;
-
-	__u32 unused2[2];
-} __attribute__ ((aligned(32)));
-
-#define OHCI_ED_SKIP	(1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of.  It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32		/* part of the OHCI standard */
-struct ohci_hcca {
-	__u32 int_table[NUM_INTS];	/* Interrupt ED table */
-	__u16 frame_no;		/* current frame number */
-	__u16 pad1;		/* set to 0 on each frame_no change */
-	__u32 done_head;	/* info returned for an interrupt */
-	u8 reserved_for_hc[116];
-} __attribute__ ((aligned(256)));
-
-/*
- * Maximum number of root hub ports.
- */
-#define MAX_ROOT_PORTS	15	/* maximum OHCI root hub ports */
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region.  This is Memory Mapped I/O.	You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
-	/* control and status registers */
-	__u32 revision;
-	__u32 control;
-	__u32 cmdstatus;
-	__u32 intrstatus;
-	__u32 intrenable;
-	__u32 intrdisable;
-	/* memory pointers */
-	__u32 hcca;
-	__u32 ed_periodcurrent;
-	__u32 ed_controlhead;
-	__u32 ed_controlcurrent;
-	__u32 ed_bulkhead;
-	__u32 ed_bulkcurrent;
-	__u32 donehead;
-	/* frame counters */
-	__u32 fminterval;
-	__u32 fmremaining;
-	__u32 fmnumber;
-	__u32 periodicstart;
-	__u32 lsthresh;
-	/* Root hub ports */
-	struct ohci_roothub_regs {
-		__u32 a;
-		__u32 b;
-		__u32 status;
-		__u32 portstatus[MAX_ROOT_PORTS];
-	} roothub;
-} __attribute__ ((aligned(32)));
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR	(3 << 0)	/* control/bulk service ratio */
-#define OHCI_CTRL_PLE	(1 << 2)	/* periodic list enable */
-#define OHCI_CTRL_IE	(1 << 3)	/* isochronous enable */
-#define OHCI_CTRL_CLE	(1 << 4)	/* control list enable */
-#define OHCI_CTRL_BLE	(1 << 5)	/* bulk list enable */
-#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
-#define OHCI_CTRL_IR	(1 << 8)	/* interrupt routing */
-#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
-#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-#	define OHCI_USB_RESET	(0 << 6)
-#	define OHCI_USB_RESUME	(1 << 6)
-#	define OHCI_USB_OPER	(2 << 6)
-#	define OHCI_USB_SUSPEND	(3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR	(1 << 0)	/* host controller reset */
-#define OHCI_CLF	(1 << 1)	/* control list filled */
-#define OHCI_BLF	(1 << 2)	/* bulk list filled */
-#define OHCI_OCR	(1 << 3)	/* ownership change request */
-#define OHCI_SOC	(3 << 16)	/* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
-#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
-#define OHCI_INTR_SF	(1 << 2)	/* start frame */
-#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
-#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
-#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
-#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
-#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
-#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
-
-/* Virtual Root HUB */
-struct virt_root_hub {
-	int devnum;		/* Address of Root Hub endpoint */
-	void *dev;		/* was urb */
-	void *int_addr;
-	int send;
-	int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE		0x01
-#define RH_ENDPOINT		0x02
-#define RH_OTHER		0x03
-
-#define RH_CLASS		0x20
-#define RH_VENDOR		0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS		0x0080
-#define RH_CLEAR_FEATURE	0x0100
-#define RH_SET_FEATURE		0x0300
-#define RH_SET_ADDRESS		0x0500
-#define RH_GET_DESCRIPTOR	0x0680
-#define RH_SET_DESCRIPTOR	0x0700
-#define RH_GET_CONFIGURATION	0x0880
-#define RH_SET_CONFIGURATION	0x0900
-#define RH_GET_STATE		0x0280
-#define RH_GET_INTERFACE	0x0A80
-#define RH_SET_INTERFACE	0x0B00
-#define RH_SYNC_FRAME		0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP		0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION	0x00
-#define RH_PORT_ENABLE		0x01
-#define RH_PORT_SUSPEND		0x02
-#define RH_PORT_OVER_CURRENT	0x03
-#define RH_PORT_RESET		0x04
-#define RH_PORT_POWER		0x08
-#define RH_PORT_LOW_SPEED	0x09
-
-#define RH_C_PORT_CONNECTION	0x10
-#define RH_C_PORT_ENABLE	0x11
-#define RH_C_PORT_SUSPEND	0x12
-#define RH_C_PORT_OVER_CURRENT	0x13
-#define RH_C_PORT_RESET		0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER	0x00
-#define RH_C_HUB_OVER_CURRENT	0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL	0x01
-
-#define RH_ACK			0x01
-#define RH_REQ_ERR		-1
-#define RH_NACK			0x00
-
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS		0x00000001 /* current connect status */
-#define RH_PS_PES		0x00000002 /* port enable status */
-#define RH_PS_PSS		0x00000004 /* port suspend status */
-#define RH_PS_POCI		0x00000008 /* port over current indicator */
-#define RH_PS_PRS		0x00000010 /* port reset status */
-#define RH_PS_PPS		0x00000100 /* port power status */
-#define RH_PS_LSDA		0x00000200 /* low speed device attached */
-#define RH_PS_CSC		0x00010000 /* connect status change */
-#define RH_PS_PESC		0x00020000 /* port enable status change */
-#define RH_PS_PSSC		0x00040000 /* port suspend status change */
-#define RH_PS_OCIC		0x00080000 /* over current indicator change */
-#define RH_PS_PRSC		0x00100000 /* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS		0x00000001 /* local power status */
-#define RH_HS_OCI		0x00000002 /* over current indicator */
-#define RH_HS_DRWE		0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC		0x00010000 /* local power status change */
-#define RH_HS_OCIC		0x00020000 /* over current indicator change */
-#define RH_HS_CRWE		0x80000000 /* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR			0x0000ffff /* device removable flags */
-#define RH_B_PPCM		0xffff0000 /* port power control mask */
-
-/* roothub.a masks */
-#define	RH_A_NDP		(0xff << 0)  /* number of downstream ports */
-#define	RH_A_PSM		(1 << 8)     /* power switching mode */
-#define	RH_A_NPS		(1 << 9)     /* no power switching */
-#define	RH_A_DT			(1 << 10)    /* device type (mbz) */
-#define	RH_A_OCPM		(1 << 11)    /* over current protection mode */
-#define	RH_A_NOCP		(1 << 12)    /* no over current protection */
-#define	RH_A_POTPGT		(0xff << 24) /* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-struct urb_priv {
-	struct ed *ed;
-	__u16 length;		/* number of tds associated with this request */
-	__u16 td_cnt;		/* number of tds already serviced */
-	int state;
-	unsigned long pipe;
-	int actual_length;
-	struct td *td[N_URB_TD];	/* list pointer to all corresponding TDs
-					   associated with this request */
-};
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-
-struct ohci {
-	struct ohci_hcca *hcca;	/* hcca */
-	/*dma_addr_t hcca_dma; */
-
-	int irq;
-	int disabled;		/* e.g. got a UE, we're hung */
-	int sleeping;
-	unsigned long flags;	/* for HC bugs */
-
-	struct ohci_regs *regs;	/* OHCI controller's memory */
-
-	struct ed *ed_rm_list[2];  /* lists of all endpoints to be removed */
-	struct ed *ed_bulktail;    /* last endpoint of bulk list */
-	struct ed *ed_controltail; /* last endpoint of control list */
-	int intrstatus;
-	__u32 hc_control;	/* copy of the hc control reg */
-	struct usb_device *dev[32];
-	struct virt_root_hub rh;
-
-	const char *slot_name;
-};
-
-#define NUM_EDS 8		/* num of preallocated endpoint descriptors */
-
-struct ohci_device {
-	struct ed ed[NUM_EDS];
-	int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(struct ohci *ohci, struct ed *ed);
-static int ep_unlink(struct ohci *ohci, struct ed *ed);
-static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-struct td gtd[NUM_TD + 1];
-
-/* pointers to aligned storage */
-struct td *ptd;
-
-/* TDs ... */
-static inline struct td *td_alloc(struct usb_device *usb_dev)
-{
-	int i;
-	struct td *td;
-
-	td = NULL;
-	for (i = 0; i < NUM_TD; i++) {
-		if (ptd[i].usb_dev == NULL) {
-			td = &ptd[i];
-			td->usb_dev = usb_dev;
-			break;
-		}
-	}
-
-	return td;
-}
-
-static inline void ed_free(struct ed *ed)
-{
-	ed->usb_dev = NULL;
-}
diff --git a/arch/arm/cpu/lh7a40x/Makefile b/arch/arm/cpu/lh7a40x/Makefile
deleted file mode 100644
index 01cf7f5..0000000
--- a/arch/arm/cpu/lh7a40x/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).o
-
-START	= start.o
-COBJS	= cpu.o speed.o timer.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/arm/cpu/lh7a40x/config.mk b/arch/arm/cpu/lh7a40x/config.mk
deleted file mode 100644
index 1c4aa97..0000000
--- a/arch/arm/cpu/lh7a40x/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-
-PLATFORM_CPPFLAGS += -march=armv4
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# ========================================================================
-PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
-PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
diff --git a/arch/arm/cpu/lh7a40x/cpu.c b/arch/arm/cpu/lh7a40x/cpu.c
deleted file mode 100644
index b193189..0000000
--- a/arch/arm/cpu/lh7a40x/cpu.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/system.h>
-
-static void cache_flush(void);
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * we turn off caches etc ...
-	 */
-
-	disable_interrupts ();
-
-	/* turn off I/D-cache */
-	icache_disable();
-	dcache_disable();
-
-	/* flush I/D-cache */
-	cache_flush();
-
-	return 0;
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
-	unsigned long i = 0;
-
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
-}
diff --git a/arch/arm/cpu/lh7a40x/speed.c b/arch/arm/cpu/lh7a40x/speed.c
deleted file mode 100644
index 333ebb5..0000000
--- a/arch/arm/cpu/lh7a40x/speed.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-ulong get_PLLCLK (void)
-{
-	return CONFIG_SYS_CLK_FREQ;
-}
-
-/* return FCLK frequency */
-ulong get_FCLK (void)
-{
-	lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
-	ulong maindiv1, maindiv2, prediv, ps;
-
-	/*
-	 * from userguide 6.1.1.2
-	 *
-	 * FCLK = ((MAINDIV1 +2) * (MAINDIV2 +2) * 14.7456MHz) /
-	 *                   ((PREDIV+2) * (2^PS))
-	 */
-	maindiv2 = (csc->clkset & CLKSET_MAINDIV2) >> 11;
-	maindiv1 = (csc->clkset & CLKSET_MAINDIV1) >> 7;
-	prediv = (csc->clkset & CLKSET_PREDIV) >> 2;
-	ps = (csc->clkset & CLKSET_PS) >> 16;
-
-	return (((maindiv2 + 2) * (maindiv1 + 2) * CONFIG_SYS_CLK_FREQ) /
-		((prediv + 2) * (1 << ps)));
-}
-
-
-/* return HCLK frequency */
-ulong get_HCLK (void)
-{
-	lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
-
-	return (get_FCLK () / ((csc->clkset & CLKSET_HCLKDIV) + 1));
-}
-
-/* return PCLK frequency */
-ulong get_PCLK (void)
-{
-	lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
-
-	return (get_HCLK () /
-		(1 << (((csc->clkset & CLKSET_PCLKDIV) >> 16) + 1)));
-}
diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
deleted file mode 100644
index 33b9269..0000000
--- a/arch/arm/cpu/lh7a40x/start.S
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- *  armboot - Startup Code for ARM920 CPU-core
- *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
- *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:	b       reset
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction:	.word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end__ - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-#define pWDTCTL		0x80001400  /* Watchdog Timer control register */
-#define pINTENC		0x8000050C  /* Interrupt-Controller enable clear register */
-#define pCLKSET		0x80000420  /* clock divisor register */
-
-	/* disable watchdog, set watchdog control register to
-	 * all zeros (default reset)
-	 */
-	ldr     r0, =pWDTCTL
-	mov     r1, #0x0
-	str     r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTENC register (default)
-	 */
-	mov	r1, #0xffffffff
-	ldr	r0, =pINTENC
-	str	r1, [r0]
-
-	/* FCLK:HCLK:PCLK = 1:2:2 */
-	/* default FCLK is 200 MHz, using 14.7456 MHz fin */
-	ldr	r0, =pCLKSET
-	ldr r1, =0x0004ee39
-@	ldr r1, =0x0005ee39	@ 1: 2: 4
-	str	r1, [r0]
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-	ldr	r0,=0x00000000
-	bl	board_init_f
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
-	.globl	relocate_code
-relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
-
-	/* Set up the stack						    */
-stack_setup:
-	mov	sp, r4
-
-	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
-	beq	clear_bss		/* skip relocation */
-	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
-	add	r2, r0, r3		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-#ifndef CONFIG_SPL_BUILD
-	/*
-	 * fix .rel.dyn relocations
-	 */
-	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
-	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
-	add	r10, r10, r0		/* r10 <- sym table in FLASH */
-	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
-	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
-	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
-	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
-fixloop:
-	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
-	ldr	r1, [r2, #4]
-	and	r7, r1, #0xff
-	cmp	r7, #23			/* relative fixup? */
-	beq	fixrel
-	cmp	r7, #2			/* absolute fixup? */
-	beq	fixabs
-	/* ignore unknown type of fixup */
-	b	fixnext
-fixabs:
-	/* absolute fix: set location to (offset) symbol value */
-	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
-	add	r1, r10, r1		/* r1 <- address of symbol in table */
-	ldr	r1, [r1, #4]		/* r1 <- symbol value */
-	add	r1, r1, r9		/* r1 <- relocated sym addr */
-	b	fixnext
-fixrel:
-	/* relative fix: increase location by offset */
-	ldr	r1, [r0]
-	add	r1, r1, r9
-fixnext:
-	str	r1, [r0]
-	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
-	cmp	r2, r3
-	blo	fixloop
-#endif
-
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
-	ldr	r0, _bss_start_ofs
-	ldr	r1, _bss_end_ofs
-	mov	r4, r6			/* reloc addr */
-	add	r0, r0, r4
-	add	r1, r1, r4
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:cmp	r0, r1			/* clear loop... */
-	bhs	clbss_e			/* if reached end of bss, exit */
-	str	r2, [r0]
-	add	r0, r0, #4
-	b	clbss_l
-clbss_e:
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-	ldr	r0, _board_init_r_ofs
-	adr	r1, _start
-	add	lr, r0, r1
-	add	lr, lr, r9
-	/* setup parameters for board_init_r */
-	mov	r0, r5		/* gd_t */
-	mov	r1, r6		/* dest_addr */
-	/* jump to it ... */
-	mov	pc, lr
-
-_board_init_r_ofs:
-	.word board_init_r - _start
-
-_rel_dyn_start_ofs:
-	.word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
-	.word __rel_dyn_end - _start
-_dynsym_start_ofs:
-	.word __dynsym_start - _start
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-cpu_init_crit:
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-	orr	r0, r0, #0x40000000	@ set bit 30 (nF) notFastBus
-	mcr	p15, 0, r0, c1, c0, 0
-
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	mov	ip, lr
-	bl	lowlevel_init
-	mov	lr, ip
-
-	mov	pc, lr
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	ldr	r2, IRQ_STACK_START_IN
-	ldmia	r2, {r2 - r3}			@ get pc, cpsr
-	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
-	mov	r0, sp
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add     r8, sp, #S_PC
-	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
-	str     lr, [r8, #0]                    @ Save calling PC
-	mrs     r6, spsr
-	str     r6, [r8, #4]                    @ Save CPSR
-	str     r0, [r8, #8]                    @ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-
-	str	lr, [r13]			@ save caller lr / spsr
-	mrs	lr, spsr
-	str     lr, [r13, #4]
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	@ msr	spsr_c, r13
-	msr	spsr, r13
-	mov	lr, pc
-	movs	pc, lr
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-/*
- * exception handlers
- */
-	.align  5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
-
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	bl	disable_interrupts
-
-	/* Disable watchdog */
-	ldr	r1, =pWDTCTL
-	mov	r3, #0
-	str	r3, [r1]
-
-	/* reset counter */
-	ldr	r3, =0x00001984
-	str	r3, [r1, #4]
-
-	/* Enable the watchdog */
-	mov	r3, #1
-	str	r3, [r1]
-
-_loop_forever:
-	b	_loop_forever
diff --git a/arch/arm/cpu/lh7a40x/timer.c b/arch/arm/cpu/lh7a40x/timer.c
deleted file mode 100644
index 58b35b1..0000000
--- a/arch/arm/cpu/lh7a40x/timer.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-static ulong timer_load_val = 0;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
-	lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR;
-	lh7a40x_timer_t* timer = &timers->timer1;
-
-	return (timer->value & 0x0000ffff);
-}
-
-static ulong timestamp;
-static ulong lastdec;
-
-int timer_init (void)
-{
-	lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR;
-	lh7a40x_timer_t* timer = &timers->timer1;
-
-	/* a periodic timer using the 508kHz source */
-	timer->control = (TIMER_PER | TIMER_CLK508K);
-
-	if (timer_load_val == 0) {
-		/*
-		 * 10ms period with 508.469kHz clock = 5084
-		 */
-		timer_load_val = CONFIG_SYS_HZ/100;
-	}
-
-	/* load value for 10 ms timeout */
-	lastdec = timer->load = timer_load_val;
-
-	/* auto load, start timer */
-	timer->control = timer->control | TIMER_EN;
-	timestamp = 0;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-ulong get_timer (ulong base)
-{
-	return (get_timer_masked() - base);
-}
-
-void __udelay (unsigned long usec)
-{
-	ulong tmo,tmp;
-
-	/* normalize */
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= CONFIG_SYS_HZ;
-		tmo /= 1000;
-	}
-	else {
-		if (usec > 1) {
-			tmo = usec * CONFIG_SYS_HZ;
-			tmo /= (1000*1000);
-		}
-		else
-			tmo = 1;
-	}
-
-	/* check for rollover during this delay */
-	tmp = get_timer (0);
-	if ((tmp + tmo) < tmp )
-		reset_timer_masked();  /* timer would roll over */
-	else
-		tmo += tmp;
-
-	while (get_timer_masked () < tmo);
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastdec = READ_TIMER();
-	timestamp = 0;
-}
-
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER();
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += (lastdec - now);
-	} else {
-		/* we have an overflow ... */
-		timestamp += ((lastdec + timer_load_val) - now);
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	/* normalize */
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= CONFIG_SYS_HZ;
-		tmo /= 1000;
-	} else {
-		if (usec > 1) {
-			tmo = usec * CONFIG_SYS_HZ;
-			tmo /= (1000*1000);
-		} else {
-			tmo = 1;
-		}
-	}
-
-	endtime = get_timer_masked () + tmo;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-
-	tbclk = timer_load_val * 100;
-
-	return tbclk;
-}
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 0b47ab3..99cb54b 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -274,6 +274,8 @@ void board_init_f(ulong bootflag)
 #ifdef CONFIG_PRAM
 	ulong reg;
 #endif
+	void *new_fdt = NULL;
+	size_t fdt_size = 0;
 
 	bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
 
@@ -409,6 +411,22 @@ void board_init_f(ulong bootflag)
 	debug("Reserving %zu Bytes for Global Data at: %08lx\n",
 			sizeof (gd_t), addr_sp);
 
+#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL)
+	/*
+	 * If the device tree is sitting immediate above our image then we
+	 * must relocate it. If it is embedded in the data section, then it
+	 * will be relocated with other data.
+	 */
+	if (gd->fdt_blob) {
+		fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32);
+
+		addr_sp -= fdt_size;
+		new_fdt = (void *)addr_sp;
+		debug("Reserving %zu Bytes for FDT at: %08lx\n",
+		      fdt_size, addr_sp);
+	}
+#endif
+
 	/* setup stackpointer for exeptions */
 	gd->irq_sp = addr_sp;
 #ifdef CONFIG_USE_IRQ
@@ -442,6 +460,10 @@ void board_init_f(ulong bootflag)
 	gd->start_addr_sp = addr_sp;
 	gd->reloc_off = addr - _TEXT_BASE;
 	debug("relocation Offset is: %08lx\n", gd->reloc_off);
+	if (new_fdt) {
+		memcpy(new_fdt, gd->fdt_blob, fdt_size);
+		gd->fdt_blob = new_fdt;
+	}
 	memcpy(id, (void *)gd, sizeof(gd_t));
 
 	relocate_code(addr_sp, id, addr);