summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorSiarhei Siamashka <siarhei.siamashka@gmail.com>2014-08-03 05:32:52 +0300
committerHans de Goede <hdegoede@redhat.com>2014-08-12 08:42:33 +0200
commitb5c71f5f9c1634d72f40b2c17aeff53ef8fdf8e0 (patch)
tree9eb97306507bacbd8913b17d6df96091f12353c5 /arch/arm
parentd755a5fb20a7e3192d301d6d6a44814b10fb4f46 (diff)
downloadu-boot-imx-b5c71f5f9c1634d72f40b2c17aeff53ef8fdf8e0.zip
u-boot-imx-b5c71f5f9c1634d72f40b2c17aeff53ef8fdf8e0.tar.gz
u-boot-imx-b5c71f5f9c1634d72f40b2c17aeff53ef8fdf8e0.tar.bz2
sunxi: dram: Drop DDR2 support and assume only single rank DDR3 memory
All the known Allwinner A10/A13/A20 devices are using just single rank DDR3 memory. So don't pretend that we support DDR2 or more than one rank, because nobody could ever test these configurations for real and they are likely broken. Support for these features can be added back in the case if such hardware actually exists. As part of this code cleanup, also replace division by 1024 with division by 1000 for the refresh timing calculations. This allows to use the original non-skewed tRFC timing table from the DRR3 spec and make code less confusing. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/cpu/armv7/sunxi/dram.c41
1 files changed, 19 insertions, 22 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c
index be6750d..0bbb10d 100644
--- a/arch/arm/cpu/armv7/sunxi/dram.c
+++ b/arch/arm/cpu/armv7/sunxi/dram.c
@@ -434,20 +434,18 @@ static void dramc_clock_output_en(u32 on)
#endif
}
-static const u16 tRFC_table[2][6] = {
- /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */
- /* DDR2 75ns 105ns 127.5ns 195ns 327.5ns invalid */
- { 77, 108, 131, 200, 336, 336 },
- /* DDR3 invalid 90ns 110ns 160ns 300ns 350ns */
- { 93, 93, 113, 164, 308, 359 }
+/* tRFC in nanoseconds for different densities (from the DDR3 spec) */
+static const u16 tRFC_DDR3_table[6] = {
+ /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */
+ 90, 90, 110, 160, 300, 350
};
-static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density)
+static void dramc_set_autorefresh_cycle(u32 clk, u32 density)
{
struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
u32 tRFC, tREFI;
- tRFC = (tRFC_table[type][density] * clk + 1023) >> 10;
+ tRFC = (tRFC_DDR3_table[density] * clk + 999) / 1000;
tREFI = (7987 * clk) >> 10; /* <= 7.8us */
writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
@@ -570,6 +568,13 @@ unsigned long dramc_init(struct dram_para *para)
if (!para)
return 0;
+ /*
+ * only single rank DDR3 is supported by this code even though the
+ * hardware can theoretically support DDR2 and up to two ranks
+ */
+ if (para->type != DRAM_MEMORY_TYPE_DDR3 || para->rank_num != 1)
+ return 0;
+
/* setup DRAM relative clock */
mctl_setup_dram_clock(para->clock, para->mbus_clock);
@@ -590,9 +595,7 @@ unsigned long dramc_init(struct dram_para *para)
mctl_enable_dll0(para->tpr3);
/* configure external DRAM */
- reg_val = 0x0;
- if (para->type == DRAM_MEMORY_TYPE_DDR3)
- reg_val |= DRAM_DCR_TYPE_DDR3;
+ reg_val = DRAM_DCR_TYPE_DDR3;
reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
if (para->density == 256)
@@ -632,25 +635,19 @@ unsigned long dramc_init(struct dram_para *para)
mctl_enable_dllx(para->tpr3);
/* set refresh period */
- dramc_set_autorefresh_cycle(para->clock, para->type - 2, density);
+ dramc_set_autorefresh_cycle(para->clock, density);
/* set timing parameters */
writel(para->tpr0, &dram->tpr0);
writel(para->tpr1, &dram->tpr1);
writel(para->tpr2, &dram->tpr2);
- if (para->type == DRAM_MEMORY_TYPE_DDR3) {
- reg_val = DRAM_MR_BURST_LENGTH(0x0);
+ reg_val = DRAM_MR_BURST_LENGTH(0x0);
#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
- reg_val |= DRAM_MR_POWER_DOWN;
+ reg_val |= DRAM_MR_POWER_DOWN;
#endif
- reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
- reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
- } else if (para->type == DRAM_MEMORY_TYPE_DDR2) {
- reg_val = DRAM_MR_BURST_LENGTH(0x2);
- reg_val |= DRAM_MR_CAS_LAT(para->cas);
- reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
- }
+ reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
+ reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
writel(reg_val, &dram->mr);
writel(para->emr1, &dram->emr);