summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorPeng Fan <peng.fan@nxp.com>2016-01-28 16:55:09 +0800
committerStefano Babic <sbabic@denx.de>2016-02-21 11:46:26 +0100
commit35c4ce5e20d3d10d1089ba336a248896faed284c (patch)
tree42cc2f00d82473a29c6a3382d93c89415a435382 /arch/arm
parent79e355fb685803a245c3f0165c07faa5a3fbf808 (diff)
downloadu-boot-imx-35c4ce5e20d3d10d1089ba336a248896faed284c.zip
u-boot-imx-35c4ce5e20d3d10d1089ba336a248896faed284c.tar.gz
u-boot-imx-35c4ce5e20d3d10d1089ba336a248896faed284c.tar.bz2
imx: mx7d: isolate resources to domain 0 for A7 core
In current design, if any peripheral was assigned to both A7 and M4, it will receive ipg_stop or ipg_wait when any of the 2 platforms enter low power mode. We will have a risk that, if A7 enter wait, M4 enter stop, peripheral will have chance to get ipg_stop and ipg_wait asserted same time. Also if M4 enters stop mode, A7 will have no chance to access the peripheral. There are 26 peripherals affected by this IC issue: SIM2(sim2/emvsim2) SIM1(sim1/emvsim1) UART1/UART2/UART3/UART4/UART5/UART6/UART7 SAI1/SAI2/SAI3 WDOG1/WDOG2/WDOG3/WDOG4 GPT1/GPT2/GPT3/GPT4 PWM1/PWM2/PWM3/PWM4 ENET1/ENET2 Software Workaround: The solution is to set the peripherals to Domain0 by A core, since A core in Domain0. The peripherals which will be used by M4, will be set to Domain1 by M4. For example, A core set WDOG4 to domain0, but when M4 boots up, M4 will set WDOG4 to domain1, because M4 will use WDOG4. So the peripherals are not shared by them. This way requires the uboot implemented the RDC driver and set the 26 IPs above to domain 0 only. M4 image will set the M4 to domain 1 and set peripheral which it will use to domain 1. This patch enables the CONFIG_IMX_RDC and CONFIG_IMX_BOOTAUX for i.MX7D SABRESD board, and setup the 26 IP resources to domain 0. Signed-off-by: Ye.Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/cpu/armv7/mx7/soc.c64
1 files changed, 64 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
index d934b8b..ba6cfb9 100644
--- a/arch/arm/cpu/armv7/mx7/soc.c
+++ b/arch/arm/cpu/armv7/mx7/soc.c
@@ -12,6 +12,8 @@
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/dma.h>
#include <asm/imx-common/hab.h>
+#include <asm/imx-common/rdc-sema.h>
+#include <asm/arch/imx-rdc.h>
#include <asm/arch/crm_regs.h>
#include <dm.h>
#include <imx_thermal.h>
@@ -29,6 +31,65 @@ U_BOOT_DEVICE(imx7_thermal) = {
};
#endif
+#ifdef CONFIG_IMX_RDC
+/*
+ * In current design, if any peripheral was assigned to both A7 and M4,
+ * it will receive ipg_stop or ipg_wait when any of the 2 platforms enter
+ * low power mode. So M4 sleep will cause some peripherals fail to work
+ * at A7 core side. At default, all resources are in domain 0 - 3.
+ *
+ * There are 26 peripherals impacted by this IC issue:
+ * SIM2(sim2/emvsim2)
+ * SIM1(sim1/emvsim1)
+ * UART1/UART2/UART3/UART4/UART5/UART6/UART7
+ * SAI1/SAI2/SAI3
+ * WDOG1/WDOG2/WDOG3/WDOG4
+ * GPT1/GPT2/GPT3/GPT4
+ * PWM1/PWM2/PWM3/PWM4
+ * ENET1/ENET2
+ * Software Workaround:
+ * Here we setup some resources to domain 0 where M4 codes will move
+ * the M4 out of this domain. Then M4 is not able to access them any longer.
+ * This is a workaround for ic issue. So the peripherals are not shared
+ * by them. This way requires the uboot implemented the RDC driver and
+ * set the 26 IPs above to domain 0 only. M4 code will assign resource
+ * to its own domain, if it want to use the resource.
+ */
+static rdc_peri_cfg_t const resources[] = {
+ (RDC_PER_SIM1 | RDC_DOMAIN(0)),
+ (RDC_PER_SIM2 | RDC_DOMAIN(0)),
+ (RDC_PER_UART1 | RDC_DOMAIN(0)),
+ (RDC_PER_UART2 | RDC_DOMAIN(0)),
+ (RDC_PER_UART3 | RDC_DOMAIN(0)),
+ (RDC_PER_UART4 | RDC_DOMAIN(0)),
+ (RDC_PER_UART5 | RDC_DOMAIN(0)),
+ (RDC_PER_UART6 | RDC_DOMAIN(0)),
+ (RDC_PER_UART7 | RDC_DOMAIN(0)),
+ (RDC_PER_SAI1 | RDC_DOMAIN(0)),
+ (RDC_PER_SAI2 | RDC_DOMAIN(0)),
+ (RDC_PER_SAI3 | RDC_DOMAIN(0)),
+ (RDC_PER_WDOG1 | RDC_DOMAIN(0)),
+ (RDC_PER_WDOG2 | RDC_DOMAIN(0)),
+ (RDC_PER_WDOG3 | RDC_DOMAIN(0)),
+ (RDC_PER_WDOG4 | RDC_DOMAIN(0)),
+ (RDC_PER_GPT1 | RDC_DOMAIN(0)),
+ (RDC_PER_GPT2 | RDC_DOMAIN(0)),
+ (RDC_PER_GPT3 | RDC_DOMAIN(0)),
+ (RDC_PER_GPT4 | RDC_DOMAIN(0)),
+ (RDC_PER_PWM1 | RDC_DOMAIN(0)),
+ (RDC_PER_PWM2 | RDC_DOMAIN(0)),
+ (RDC_PER_PWM3 | RDC_DOMAIN(0)),
+ (RDC_PER_PWM4 | RDC_DOMAIN(0)),
+ (RDC_PER_ENET1 | RDC_DOMAIN(0)),
+ (RDC_PER_ENET2 | RDC_DOMAIN(0)),
+};
+
+static void isolate_resource(void)
+{
+ imx_rdc_setup_peripherals(resources, ARRAY_SIZE(resources));
+}
+#endif
+
#if defined(CONFIG_SECURE_BOOT)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 1,
@@ -163,6 +224,9 @@ int arch_cpu_init(void)
mxs_dma_init();
#endif
+ if (IS_ENABLED(CONFIG_IMX_RDC))
+ isolate_resource();
+
return 0;
}