Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
	drivers/video/exynos_fb.c

4 files changed, 18 insertions, 674 deletions

diff --git a/arch/arm/cpu/arm926ejs/spear/spear600.c b/arch/arm/cpu/arm926ejs/spear/spear600.c
index ff52131..9f0c1d1 100644
--- a/arch/arm/cpu/arm926ejs/spear/spear600.c
+++ b/arch/arm/cpu/arm926ejs/spear/spear600.c
@@ -28,9 +28,6 @@
 #include <asm/arch/spr_misc.h>
 #include <asm/arch/spr_defs.h>
 
-#define FALSE				0
-#define TRUE				(!FALSE)
-
 static void sel_1v8(void)
 {
 	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
@@ -133,8 +130,8 @@ void soc_init(void)
 /*
  * xxx_boot_selected:
  *
- * return TRUE if the particular booting option is selected
- * return FALSE otherwise
+ * return true if the particular booting option is selected
+ * return false otherwise
  */
 static u32 read_bootstrap(void)
 {
@@ -150,18 +147,18 @@ int snor_boot_selected(void)
 		/* Check whether SNOR boot is selected */
 		if ((bootstrap & CONFIG_SPEAR_ONLYSNORBOOT) ==
 			CONFIG_SPEAR_ONLYSNORBOOT)
-			return TRUE;
+			return true;
 
 		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
 			CONFIG_SPEAR_NORNAND8BOOT)
-			return TRUE;
+			return true;
 
 		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
 			CONFIG_SPEAR_NORNAND16BOOT)
-			return TRUE;
+			return true;
 	}
 
-	return FALSE;
+	return false;
 }
 
 int nand_boot_selected(void)
@@ -172,20 +169,20 @@ int nand_boot_selected(void)
 		/* Check whether NAND boot is selected */
 		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
 			CONFIG_SPEAR_NORNAND8BOOT)
-			return TRUE;
+			return true;
 
 		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
 			CONFIG_SPEAR_NORNAND16BOOT)
-			return TRUE;
+			return true;
 	}
 
-	return FALSE;
+	return false;
 }
 
 int pnor_boot_selected(void)
 {
 	/* Parallel NOR boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int usb_boot_selected(void)
@@ -195,39 +192,39 @@ int usb_boot_selected(void)
 	if (USB_BOOT_SUPPORTED) {
 		/* Check whether USB boot is selected */
 		if (!(bootstrap & CONFIG_SPEAR_USBBOOT))
-			return TRUE;
+			return true;
 	}
 
-	return FALSE;
+	return false;
 }
 
 int tftp_boot_selected(void)
 {
 	/* TFTP boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int uart_boot_selected(void)
 {
 	/* UART boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int spi_boot_selected(void)
 {
 	/* SPI boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int i2c_boot_selected(void)
 {
 	/* I2C boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int mmc_boot_selected(void)
 {
-	return FALSE;
+	return false;
 }
 
 void plat_late_init(void)
diff --git a/arch/arm/cpu/arm926ejs/spear/spl_boot.c b/arch/arm/cpu/arm926ejs/spear/spl_boot.c
index f2f9a49..3e2953c 100644
--- a/arch/arm/cpu/arm926ejs/spear/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/spear/spl_boot.c
@@ -120,7 +120,7 @@ u32 spl_boot(void)
 	/*
 	 * All the supported booting devices are listed here. Each of
 	 * the booting type supported by the platform would define the
-	 * macro xxx_BOOT_SUPPORTED to TRUE.
+	 * macro xxx_BOOT_SUPPORTED to true.
 	 */
 
 	if (SNOR_BOOT_SUPPORTED && snor_boot_selected()) {
diff --git a/arch/arm/cpu/pxa/Makefile b/arch/arm/cpu/pxa/Makefile
index e088832..9f63c34 100644
--- a/arch/arm/cpu/pxa/Makefile
+++ b/arch/arm/cpu/pxa/Makefile
@@ -33,7 +33,6 @@ COBJS-$(CONFIG_CPU_PXA27X)	= pxa2xx.o
 COBJS-y	+= cpuinfo.o
 
 COBJS	= $(COBJS-y)
-COBJS	+= pxafb.o
 COBJS	+= timer.o
 COBJS	+= usb.o
 
diff --git a/arch/arm/cpu/pxa/pxafb.c b/arch/arm/cpu/pxa/pxafb.c
deleted file mode 100644
index 987fa06..0000000
--- a/arch/arm/cpu/pxa/pxafb.c
+++ /dev/null
@@ -1,652 +0,0 @@
-/*
- * PXA LCD Controller
- *
- * (C) Copyright 2001-2002
- * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************/
-/* ** HEADER FILES							*/
-/************************************************************************/
-
-#include <config.h>
-#include <common.h>
-#include <version.h>
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-#include <lcd.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/io.h>
-
-/* #define DEBUG */
-
-#ifdef CONFIG_LCD
-
-/*----------------------------------------------------------------------*/
-/*
- * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for
- * your display.
- */
-
-#ifdef CONFIG_PXA_VGA
-/* LCD outputs connected to a video DAC  */
-# define LCD_BPP	LCD_COLOR8
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x003008f8
-# define REG_LCCR3	0x0300FF01
-
-/* 640x480x16 @ 61 Hz */
-vidinfo_t panel_info = {
-	.vl_col		= 640,
-	.vl_row		= 480,
-	.vl_width	= 640,
-	.vl_height	= 480,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_oep		= CONFIG_SYS_HIGH,
-	.vl_hsp		= CONFIG_SYS_HIGH,
-	.vl_vsp		= CONFIG_SYS_HIGH,
-	.vl_dp		= CONFIG_SYS_HIGH,
-	.vl_bpix	= LCD_BPP,
-	.vl_lbw		= 0,
-	.vl_splt	= 0,
-	.vl_clor	= 0,
-	.vl_tft		= 1,
-	.vl_hpw		= 40,
-	.vl_blw		= 56,
-	.vl_elw		= 56,
-	.vl_vpw		= 20,
-	.vl_bfw		= 8,
-	.vl_efw		= 8,
-};
-#endif /* CONFIG_PXA_VIDEO */
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_SHARP_LM8V31
-
-# define LCD_BPP	LCD_COLOR8
-# define LCD_INVERT_COLORS	/* Needed for colors to be correct, but why?	*/
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x0030087C
-# define REG_LCCR3	0x0340FF08
-
-vidinfo_t panel_info = {
-	.vl_col		= 640,
-	.vl_row		= 480,
-	.vl_width	= 157,
-	.vl_height	= 118,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_oep		= CONFIG_SYS_HIGH,
-	.vl_hsp		= CONFIG_SYS_HIGH,
-	.vl_vsp		= CONFIG_SYS_HIGH,
-	.vl_dp		= CONFIG_SYS_HIGH,
-	.vl_bpix	= LCD_BPP,
-	.vl_lbw		= 0,
-	.vl_splt	= 1,
-	.vl_clor	= 1,
-	.vl_tft		= 0,
-	.vl_hpw		= 1,
-	.vl_blw		= 3,
-	.vl_elw		= 3,
-	.vl_vpw		= 1,
-	.vl_bfw		= 0,
-	.vl_efw		= 0,
-};
-#endif /* CONFIG_SHARP_LM8V31 */
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_VOIPAC_LCD
-
-# define LCD_BPP	LCD_COLOR8
-# define LCD_INVERT_COLORS
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x043008f8
-# define REG_LCCR3	0x0340FF08
-
-vidinfo_t panel_info = {
-	.vl_col		= 640,
-	.vl_row		= 480,
-	.vl_width	= 157,
-	.vl_height	= 118,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_oep		= CONFIG_SYS_HIGH,
-	.vl_hsp		= CONFIG_SYS_HIGH,
-	.vl_vsp		= CONFIG_SYS_HIGH,
-	.vl_dp		= CONFIG_SYS_HIGH,
-	.vl_bpix	= LCD_BPP,
-	.vl_lbw		= 0,
-	.vl_splt	= 1,
-	.vl_clor	= 1,
-	.vl_tft		= 1,
-	.vl_hpw		= 32,
-	.vl_blw		= 144,
-	.vl_elw		= 32,
-	.vl_vpw		= 2,
-	.vl_bfw		= 13,
-	.vl_efw		= 30,
-};
-#endif /* CONFIG_VOIPAC_LCD */
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_HITACHI_SX14
-/* Hitachi SX14Q004-ZZA color STN LCD */
-#define LCD_BPP		LCD_COLOR8
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-#define REG_LCCR0	0x00301079
-#define REG_LCCR3	0x0340FF20
-
-vidinfo_t panel_info = {
-	.vl_col		= 320,
-	.vl_row		= 240,
-	.vl_width	= 167,
-	.vl_height	= 109,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_oep		= CONFIG_SYS_HIGH,
-	.vl_hsp		= CONFIG_SYS_HIGH,
-	.vl_vsp		= CONFIG_SYS_HIGH,
-	.vl_dp		= CONFIG_SYS_HIGH,
-	.vl_bpix	= LCD_BPP,
-	.vl_lbw		= 1,
-	.vl_splt	= 0,
-	.vl_clor	= 1,
-	.vl_tft		= 0,
-	.vl_hpw		= 1,
-	.vl_blw		= 1,
-	.vl_elw		= 1,
-	.vl_vpw		= 7,
-	.vl_bfw		= 0,
-	.vl_efw		= 0,
-};
-#endif /* CONFIG_HITACHI_SX14 */
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_LMS283GF05
-
-# define LCD_BPP	LCD_COLOR8
-/*# define LCD_INVERT_COLORS*/
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x043008f8
-# define REG_LCCR3	0x03b00009
-
-vidinfo_t panel_info = {
-	.vl_col		= 240,
-	.vl_row		= 320,
-	.vl_width	= 240,
-	.vl_height	= 320,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_oep		= CONFIG_SYS_LOW,
-	.vl_hsp		= CONFIG_SYS_LOW,
-	.vl_vsp		= CONFIG_SYS_LOW,
-	.vl_dp		= CONFIG_SYS_HIGH,
-	.vl_bpix	= LCD_BPP,
-	.vl_lbw		= 0,
-	.vl_splt	= 1,
-	.vl_clor	= 1,
-	.vl_tft		= 1,
-	.vl_hpw		= 4,
-	.vl_blw		= 4,
-	.vl_elw		= 8,
-	.vl_vpw		= 4,
-	.vl_bfw		= 4,
-	.vl_efw		= 8,
-};
-#endif /* CONFIG_LMS283GF05 */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_ACX517AKN
-
-# define LCD_BPP	LCD_COLOR8
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x003008f9
-# define REG_LCCR3	0x03700006
-
-vidinfo_t panel_info = {
-	.vl_col		= 320,
-	.vl_row		= 320,
-	.vl_width	= 320,
-	.vl_height	= 320,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_oep		= CONFIG_SYS_LOW,
-	.vl_hsp		= CONFIG_SYS_LOW,
-	.vl_vsp		= CONFIG_SYS_LOW,
-	.vl_dp		= CONFIG_SYS_HIGH,
-	.vl_bpix	= LCD_BPP,
-	.vl_lbw		= 0,
-	.vl_splt	= 1,
-	.vl_clor	= 1,
-	.vl_tft		= 1,
-	.vl_hpw		= 0x04,
-	.vl_blw		= 0x1c,
-	.vl_elw		= 0x08,
-	.vl_vpw		= 0x01,
-	.vl_bfw		= 0x07,
-	.vl_efw		= 0x08,
-};
-#endif /* CONFIG_ACX517AKN */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_LQ038J7DH53
-
-# define LCD_BPP	LCD_COLOR8
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x003008f9
-# define REG_LCCR3	0x03700004
-
-vidinfo_t panel_info = {
-	.vl_col		= 320,
-	.vl_row		= 480,
-	.vl_width	= 320,
-	.vl_height	= 480,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_oep		= CONFIG_SYS_LOW,
-	.vl_hsp		= CONFIG_SYS_LOW,
-	.vl_vsp		= CONFIG_SYS_LOW,
-	.vl_dp		= CONFIG_SYS_HIGH,
-	.vl_bpix	= LCD_BPP,
-	.vl_lbw		= 0,
-	.vl_splt	= 1,
-	.vl_clor	= 1,
-	.vl_tft		= 1,
-	.vl_hpw		= 0x04,
-	.vl_blw		= 0x20,
-	.vl_elw		= 0x01,
-	.vl_vpw		= 0x01,
-	.vl_bfw		= 0x04,
-	.vl_efw		= 0x01,
-};
-#endif /* CONFIG_ACX517AKN */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_LITTLETON_LCD
-# define LCD_BPP	LCD_COLOR8
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x003008f8
-# define REG_LCCR3	0x0300FF04
-
-vidinfo_t panel_info = {
-	.vl_col		= 480,
-	.vl_row		= 640,
-	.vl_width	= 480,
-	.vl_height	= 640,
-	.vl_clkp	= CONFIG_SYS_HIGH,
-	.vl_oep		= CONFIG_SYS_HIGH,
-	.vl_hsp		= CONFIG_SYS_HIGH,
-	.vl_vsp		= CONFIG_SYS_HIGH,
-	.vl_dp		= CONFIG_SYS_HIGH,
-	.vl_bpix	= LCD_BPP,
-	.vl_lbw		= 0,
-	.vl_splt	= 0,
-	.vl_clor	= 0,
-	.vl_tft		= 1,
-	.vl_hpw		= 9,
-	.vl_blw		= 8,
-	.vl_elw		= 24,
-	.vl_vpw		= 2,
-	.vl_bfw		= 2,
-	.vl_efw		= 4,
-};
-#endif /* CONFIG_LITTLETON_LCD */
-
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_COLOR8
-void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue);
-#endif
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void);
-#endif
-
-#ifdef NOT_USED_SO_FAR
-void lcd_disable (void);
-void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue);
-#endif /* NOT_USED_SO_FAR */
-
-void lcd_ctrl_init	(void *lcdbase);
-void lcd_enable	(void);
-
-int lcd_line_length;
-int lcd_color_fg;
-int lcd_color_bg;
-
-void *lcd_base;			/* Start of framebuffer memory	*/
-void *lcd_console_address;		/* Start of console buffer	*/
-
-short console_col;
-short console_row;
-
-static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid);
-static void pxafb_setup_gpio (vidinfo_t *vid);
-static void pxafb_enable_controller (vidinfo_t *vid);
-static int pxafb_init (vidinfo_t *vid);
-/************************************************************************/
-
-/************************************************************************/
-/* ---------------  PXA chipset specific functions  ------------------- */
-/************************************************************************/
-
-void lcd_ctrl_init (void *lcdbase)
-{
-	pxafb_init_mem(lcdbase, &panel_info);
-	pxafb_init(&panel_info);
-	pxafb_setup_gpio(&panel_info);
-	pxafb_enable_controller(&panel_info);
-}
-
-/*----------------------------------------------------------------------*/
-#ifdef NOT_USED_SO_FAR
-void
-lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
-{
-}
-#endif /* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-#if LCD_BPP == LCD_COLOR8
-void
-lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
-{
-	struct pxafb_info *fbi = &panel_info.pxa;
-	unsigned short *palette = (unsigned short *)fbi->palette;
-	u_int val;
-
-	if (regno < fbi->palette_size) {
-		val = ((red << 8) & 0xf800);
-		val |= ((green << 4) & 0x07e0);
-		val |= (blue & 0x001f);
-
-#ifdef LCD_INVERT_COLORS
-		palette[regno] = ~val;
-#else
-		palette[regno] = val;
-#endif
-	}
-
-	debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n",
-		regno, &palette[regno],
-		red, green, blue,
-		palette[regno]);
-}
-#endif /* LCD_COLOR8 */
-
-/*----------------------------------------------------------------------*/
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void)
-{
-	struct pxafb_info *fbi = &panel_info.pxa;
-	cmap = (ushort *)fbi->palette;
-	ushort regno;
-
-	for (regno = 0; regno < 16; regno++) {
-		cmap[regno * 2] = 0;
-		cmap[(regno * 2) + 1] = regno & 0x0f;
-	}
-}
-#endif /* LCD_MONOCHROME */
-
-/*----------------------------------------------------------------------*/
-void lcd_enable (void)
-{
-}
-
-/*----------------------------------------------------------------------*/
-#ifdef	NOT_USED_SO_FAR
-static void lcd_disable (void)
-{
-}
-#endif /* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-
-/************************************************************************/
-/* ** PXA255 specific routines						*/
-/************************************************************************/
-
-/*
- * Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb,
- * descriptors and palette areas.
- */
-ulong calc_fbsize (void)
-{
-	ulong size;
-	int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
-
-	size = line_length * panel_info.vl_row;
-	size += PAGE_SIZE;
-
-	return size;
-}
-
-static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid)
-{
-	u_long palette_mem_size;
-	struct pxafb_info *fbi = &vid->pxa;
-	int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
-
-	fbi->screen = (u_long)lcdbase;
-
-	fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16;
-	palette_mem_size = fbi->palette_size * sizeof(u16);
-
-	debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
-	/* locate palette and descs at end of page following fb */
-	fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
-
-	return 0;
-}
-#ifdef	CONFIG_CPU_MONAHANS
-static inline void pxafb_setup_gpio (vidinfo_t *vid) {}
-#else
-static void pxafb_setup_gpio (vidinfo_t *vid)
-{
-	u_long lccr0;
-
-	/*
-	 * setup is based on type of panel supported
-	 */
-
-	lccr0 = vid->pxa.reg_lccr0;
-
-	/* 4 bit interface */
-	if ((lccr0 & LCCR0_CMS) && (lccr0 & LCCR0_SDS) && !(lccr0 & LCCR0_DPD))
-	{
-		debug("Setting GPIO for 4 bit data\n");
-		/* bits 58-61 */
-		writel(readl(GPDR1) | (0xf << 26), GPDR1);
-		writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20),
-			GAFR1_U);
-
-		/* bits 74-77 */
-		writel(readl(GPDR2) | (0xf << 10), GPDR2);
-		writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
-			GAFR2_L);
-	}
-
-	/* 8 bit interface */
-	else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) ||
-		(!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS)))
-	{
-		debug("Setting GPIO for 8 bit data\n");
-		/* bits 58-65 */
-		writel(readl(GPDR1) | (0x3f << 26), GPDR1);
-		writel(readl(GPDR2) | (0x3), GPDR2);
-
-		writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
-			GAFR1_U);
-		writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L);
-
-		/* bits 74-77 */
-		writel(readl(GPDR2) | (0xf << 10), GPDR2);
-		writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
-			GAFR2_L);
-	}
-
-	/* 16 bit interface */
-	else if (!(lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_PAS)))
-	{
-		debug("Setting GPIO for 16 bit data\n");
-		/* bits 58-77 */
-		writel(readl(GPDR1) | (0x3f << 26), GPDR1);
-		writel(readl(GPDR2) | 0x00003fff, GPDR2);
-
-		writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
-			GAFR1_U);
-		writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L);
-	}
-	else
-	{
-		printf("pxafb_setup_gpio: unable to determine bits per pixel\n");
-	}
-}
-#endif
-
-static void pxafb_enable_controller (vidinfo_t *vid)
-{
-	debug("Enabling LCD controller\n");
-
-	/* Sequence from 11.7.10 */
-	writel(vid->pxa.reg_lccr3, LCCR3);
-	writel(vid->pxa.reg_lccr2, LCCR2);
-	writel(vid->pxa.reg_lccr1, LCCR1);
-	writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0);
-	writel(vid->pxa.fdadr0, FDADR0);
-	writel(vid->pxa.fdadr1, FDADR1);
-	writel(readl(LCCR0) | LCCR0_ENB, LCCR0);
-
-#ifdef	CONFIG_CPU_MONAHANS
-	writel(readl(CKENA) | CKENA_1_LCD, CKENA);
-#else
-	writel(readl(CKEN) | CKEN16_LCD, CKEN);
-#endif
-
-	debug("FDADR0 = 0x%08x\n", readl(FDADR0));
-	debug("FDADR1 = 0x%08x\n", readl(FDADR1));
-	debug("LCCR0 = 0x%08x\n", readl(LCCR0));
-	debug("LCCR1 = 0x%08x\n", readl(LCCR1));
-	debug("LCCR2 = 0x%08x\n", readl(LCCR2));
-	debug("LCCR3 = 0x%08x\n", readl(LCCR3));
-}
-
-static int pxafb_init (vidinfo_t *vid)
-{
-	struct pxafb_info *fbi = &vid->pxa;
-
-	debug("Configuring PXA LCD\n");
-
-	fbi->reg_lccr0 = REG_LCCR0;
-	fbi->reg_lccr3 = REG_LCCR3;
-
-	debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n",
-		vid->vl_col, vid->vl_hpw,
-		vid->vl_blw, vid->vl_elw);
-	debug("vid: vl_row=%d vslen=%d um=%d bm=%d\n",
-		vid->vl_row, vid->vl_vpw,
-		vid->vl_bfw, vid->vl_efw);
-
-	fbi->reg_lccr1 =
-		LCCR1_DisWdth(vid->vl_col) +
-		LCCR1_HorSnchWdth(vid->vl_hpw) +
-		LCCR1_BegLnDel(vid->vl_blw) +
-		LCCR1_EndLnDel(vid->vl_elw);
-
-	fbi->reg_lccr2 =
-		LCCR2_DisHght(vid->vl_row) +
-		LCCR2_VrtSnchWdth(vid->vl_vpw) +
-		LCCR2_BegFrmDel(vid->vl_bfw) +
-		LCCR2_EndFrmDel(vid->vl_efw);
-
-	fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP);
-	fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH)
-			| (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH);
-
-
-	/* setup dma descriptors */
-	fbi->dmadesc_fblow = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
-	fbi->dmadesc_fbhigh = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
-	fbi->dmadesc_palette = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
-
-	#define BYTES_PER_PANEL	((fbi->reg_lccr0 & LCCR0_SDS) ? \
-		(vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8 / 2) : \
-		(vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8))
-
-	/* populate descriptors */
-	fbi->dmadesc_fblow->fdadr = (u_long)fbi->dmadesc_fblow;
-	fbi->dmadesc_fblow->fsadr = fbi->screen + BYTES_PER_PANEL;
-	fbi->dmadesc_fblow->fidr  = 0;
-	fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL;
-
-	fbi->fdadr1 = (u_long)fbi->dmadesc_fblow; /* only used in dual-panel mode */
-
-	fbi->dmadesc_fbhigh->fsadr = fbi->screen;
-	fbi->dmadesc_fbhigh->fidr = 0;
-	fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL;
-
-	fbi->dmadesc_palette->fsadr = fbi->palette;
-	fbi->dmadesc_palette->fidr  = 0;
-	fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
-
-	if( NBITS(vid->vl_bpix) < 12)
-	{
-		/* assume any mode with <12 bpp is palette driven */
-		fbi->dmadesc_palette->fdadr = (u_long)fbi->dmadesc_fbhigh;
-		fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_palette;
-		/* flips back and forth between pal and fbhigh */
-		fbi->fdadr0 = (u_long)fbi->dmadesc_palette;
-	}
-	else
-	{
-		/* palette shouldn't be loaded in true-color mode */
-		fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_fbhigh;
-		fbi->fdadr0 = (u_long)fbi->dmadesc_fbhigh; /* no pal just fbhigh */
-	}
-
-	debug("fbi->dmadesc_fblow = 0x%lx\n", (u_long)fbi->dmadesc_fblow);
-	debug("fbi->dmadesc_fbhigh = 0x%lx\n", (u_long)fbi->dmadesc_fbhigh);
-	debug("fbi->dmadesc_palette = 0x%lx\n", (u_long)fbi->dmadesc_palette);
-
-	debug("fbi->dmadesc_fblow->fdadr = 0x%lx\n", fbi->dmadesc_fblow->fdadr);
-	debug("fbi->dmadesc_fbhigh->fdadr = 0x%lx\n", fbi->dmadesc_fbhigh->fdadr);
-	debug("fbi->dmadesc_palette->fdadr = 0x%lx\n", fbi->dmadesc_palette->fdadr);
-
-	debug("fbi->dmadesc_fblow->fsadr = 0x%lx\n", fbi->dmadesc_fblow->fsadr);
-	debug("fbi->dmadesc_fbhigh->fsadr = 0x%lx\n", fbi->dmadesc_fbhigh->fsadr);
-	debug("fbi->dmadesc_palette->fsadr = 0x%lx\n", fbi->dmadesc_palette->fsadr);
-
-	debug("fbi->dmadesc_fblow->ldcmd = 0x%lx\n", fbi->dmadesc_fblow->ldcmd);
-	debug("fbi->dmadesc_fbhigh->ldcmd = 0x%lx\n", fbi->dmadesc_fbhigh->ldcmd);
-	debug("fbi->dmadesc_palette->ldcmd = 0x%lx\n", fbi->dmadesc_palette->ldcmd);
-
-	return 0;
-}
-
-/************************************************************************/
-/************************************************************************/
-
-#endif /* CONFIG_LCD */