ARM: socfpga: move SoC sources to mach-socfpga

Our recent trend is to collect SoC files into arch/arm/mach-(SOC).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

1 files changed, 289 insertions, 0 deletions

diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
new file mode 100644
index 0000000..0f8b4d0
--- /dev/null
+++ b/arch/arm/mach-socfpga/misc.c
@@ -0,0 +1,289 @@
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <altera.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <watchdog.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/nic301.h>
+#include <asm/arch/scu.h>
+#include <asm/pl310.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pl310_regs *const pl310 =
+	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
+static struct socfpga_system_manager *sysmgr_regs =
+	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+static struct socfpga_reset_manager *reset_manager_base =
+	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
+static struct nic301_registers *nic301_regs =
+	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
+static struct scu_registers *scu_regs =
+	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+	return 0;
+}
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_ICACHE_OFF
+	icache_enable();
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+	dcache_enable();
+#endif
+}
+
+/*
+ * DesignWare Ethernet initialization
+ */
+#ifdef CONFIG_ETH_DESIGNWARE
+int cpu_eth_init(bd_t *bis)
+{
+#if CONFIG_EMAC_BASE == SOCFPGA_EMAC0_ADDRESS
+	const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
+#elif CONFIG_EMAC_BASE == SOCFPGA_EMAC1_ADDRESS
+	const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
+#else
+#error "Incorrect CONFIG_EMAC_BASE value!"
+#endif
+
+	/* Initialize EMAC. This needs to be done at least once per boot. */
+
+	/*
+	 * Putting the EMAC controller to reset when configuring the PHY
+	 * interface select at System Manager
+	 */
+	socfpga_emac_reset(1);
+
+	/* Clearing emac0 PHY interface select to 0 */
+	clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
+		     SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
+
+	/* configure to PHY interface select choosed */
+	setbits_le32(&sysmgr_regs->emacgrp_ctrl,
+		     SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift);
+
+	/* Release the EMAC controller from reset */
+	socfpga_emac_reset(0);
+
+	/* initialize and register the emac */
+	return designware_initialize(CONFIG_EMAC_BASE,
+				     CONFIG_PHY_INTERFACE_MODE);
+}
+#endif
+
+#ifdef CONFIG_DWMMC
+/*
+ * Initializes MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+	return socfpga_dwmmc_init(SOCFPGA_SDMMC_ADDRESS,
+				  CONFIG_HPS_SDMMC_BUSWIDTH, 0);
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+/*
+ * Print CPU information
+ */
+int print_cpuinfo(void)
+{
+	puts("CPU:   Altera SoCFPGA Platform\n");
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
+defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
+int overwrite_console(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FPGA
+/*
+ * FPGA programming support for SoC FPGA Cyclone V
+ */
+static Altera_desc altera_fpga[] = {
+	{
+		/* Family */
+		Altera_SoCFPGA,
+		/* Interface type */
+		fast_passive_parallel,
+		/* No limitation as additional data will be ignored */
+		-1,
+		/* No device function table */
+		NULL,
+		/* Base interface address specified in driver */
+		NULL,
+		/* No cookie implementation */
+		0
+	},
+};
+
+/* add device descriptor to FPGA device table */
+static void socfpga_fpga_add(void)
+{
+	int i;
+	fpga_init();
+	for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
+		fpga_add(fpga_altera, &altera_fpga[i]);
+}
+#else
+static inline void socfpga_fpga_add(void) {}
+#endif
+
+int arch_cpu_init(void)
+{
+#ifdef CONFIG_HW_WATCHDOG
+	/*
+	 * In case the watchdog is enabled, make sure to (re-)configure it
+	 * so that the defined timeout is valid. Otherwise the SPL (Perloader)
+	 * timeout value is still active which might too short for Linux
+	 * booting.
+	 */
+	hw_watchdog_init();
+#else
+	/*
+	 * If the HW watchdog is NOT enabled, make sure it is not running,
+	 * for example because it was enabled in the preloader. This might
+	 * trigger a watchdog-triggered reboot of Linux kernel later.
+	 */
+	socfpga_watchdog_reset();
+#endif
+
+	return 0;
+}
+
+/*
+ * Convert all NIC-301 AMBA slaves from secure to non-secure
+ */
+static void socfpga_nic301_slave_ns(void)
+{
+	writel(0x1, &nic301_regs->lwhps2fpgaregs);
+	writel(0x1, &nic301_regs->hps2fpgaregs);
+	writel(0x1, &nic301_regs->acp);
+	writel(0x1, &nic301_regs->rom);
+	writel(0x1, &nic301_regs->ocram);
+	writel(0x1, &nic301_regs->sdrdata);
+}
+
+static uint32_t iswgrp_handoff[8];
+
+int arch_early_init_r(void)
+{
+	int i;
+	for (i = 0; i < 8; i++)	/* Cache initial SW setting regs */
+		iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
+
+	socfpga_bridges_reset(1);
+	socfpga_nic301_slave_ns();
+
+	/*
+	 * Private components security:
+	 * U-Boot : configure private timer, global timer and cpu component
+	 * access as non secure for kernel stage (as required by Linux)
+	 */
+	setbits_le32(&scu_regs->sacr, 0xfff);
+
+	/* Configure the L2 controller to make SDRAM start at 0 */
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+	writel(0x2, &nic301_regs->remap);
+#else
+	writel(0x1, &nic301_regs->remap);	/* remap.mpuzero */
+	writel(0x1, &pl310->pl310_addr_filter_start);
+#endif
+
+	/* Add device descriptor to FPGA device table */
+	socfpga_fpga_add();
+
+#ifdef CONFIG_DESIGNWARE_SPI
+	/* Get Designware SPI controller out of reset */
+	socfpga_spim_enable();
+#endif
+
+	return 0;
+}
+
+static void socfpga_sdram_apply_static_cfg(void)
+{
+	const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c;
+	const uint32_t applymask = 0x8;
+	uint32_t val = readl(staticcfg) | applymask;
+
+	/*
+	 * SDRAM staticcfg register specific:
+	 * When applying the register setting, the CPU must not access
+	 * SDRAM. Luckily for us, we can abuse i-cache here to help us
+	 * circumvent the SDRAM access issue. The idea is to make sure
+	 * that the code is in one full i-cache line by branching past
+	 * it and back. Once it is in the i-cache, we execute the core
+	 * of the code and apply the register settings.
+	 *
+	 * The code below uses 7 instructions, while the Cortex-A9 has
+	 * 32-byte cachelines, thus the limit is 8 instructions total.
+	 */
+	asm volatile(
+		".align	5			\n"
+		"	b	2f		\n"
+		"1:	str	%0,	[%1]	\n"
+		"	dsb			\n"
+		"	isb			\n"
+		"	b	3f		\n"
+		"2:	b	1b		\n"
+		"3:	nop			\n"
+	: : "r"(val), "r"(staticcfg) : "memory", "cc");
+}
+
+int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	if (argc != 2)
+		return CMD_RET_USAGE;
+
+	argv++;
+
+	switch (*argv[0]) {
+	case 'e':	/* Enable */
+		writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
+		socfpga_sdram_apply_static_cfg();
+		writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080);
+		writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
+		writel(iswgrp_handoff[1], &nic301_regs->remap);
+		break;
+	case 'd':	/* Disable */
+		writel(0, &sysmgr_regs->fpgaintfgrp_module);
+		writel(0, SOCFPGA_SDR_ADDRESS + 0x5080);
+		socfpga_sdram_apply_static_cfg();
+		writel(0, &reset_manager_base->brg_mod_reset);
+		writel(1, &nic301_regs->remap);
+		break;
+	default:
+		return CMD_RET_USAGE;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	bridge, 2, 1, do_bridge,
+	"SoCFPGA HPS FPGA bridge control",
+	"enable  - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+	"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+	""
+);