diff options
| author | Simon Glass <sjg@chromium.org> | 2015-03-03 08:03:00 -0700 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2015-03-04 14:55:04 -0500 |
| commit | db910353a126d84fe8dff7a694ea792f50fcfb6a (patch) | |
| tree | 0cca558754e992284820fbc240690c13d0a00cb0 /arch/arm/lib | |
| parent | bdfb34167f73afc7e04d52499fc14bc1cd33fec0 (diff) | |
| download | u-boot-imx-db910353a126d84fe8dff7a694ea792f50fcfb6a.zip u-boot-imx-db910353a126d84fe8dff7a694ea792f50fcfb6a.tar.gz u-boot-imx-db910353a126d84fe8dff7a694ea792f50fcfb6a.tar.bz2 | |
arm: spl: Allow board_init_r() to run with a larger stack
At present SPL uses a single stack, either CONFIG_SPL_STACK or
CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and
environment) require a lot of stack, some boards set CONFIG_SPL_STACK to
point into SDRAM. They then set up SDRAM very early, before board_init_f(),
so that the larger stack can be used.
This is an abuse of lowlevel_init(). That function should only be used for
essential start-up code which cannot be delayed. An example of a valid use is
when only part of the SPL code is visible/executable, and the SoC must be set
up so that board_init_f() can be reached. It should not be used for SDRAM
init, console init, etc.
Add a CONFIG_SPL_STACK_R option, which allows the stack to be moved to a new
address before board_init_r() is called in SPL.
The expected SPL flow (for CONFIG_SPL_FRAMEWORK) is documented in the README.
Signed-off-by: Simon Glass <sjg@chromium.org>
For version 1:
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch/arm/lib')
| -rw-r--r-- | arch/arm/lib/crt0.S | 13 |
1 files changed, 10 insertions, 3 deletions
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 22df3e5..7939ced 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -113,7 +113,14 @@ here: /* Set up final (full) environment */ bl c_runtime_cpu_setup /* we still call old routine here */ - +#endif +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_FRAMEWORK) +# ifdef CONFIG_SPL_BUILD + /* Use a DRAM stack for the rest of SPL, if requested */ + bl spl_relocate_stack_gd + cmp r0, #0 + movne sp, r0 +# endif ldr r0, =__bss_start /* this is auto-relocated! */ ldr r1, =__bss_end /* this is auto-relocated! */ @@ -124,9 +131,10 @@ clbss_l:cmp r0, r1 /* while not at end of BSS */ addlo r0, r0, #4 /* move to next */ blo clbss_l +#if ! defined(CONFIG_SPL_BUILD) bl coloured_LED_init bl red_led_on - +#endif /* call board_init_r(gd_t *id, ulong dest_addr) */ mov r0, r9 /* gd_t */ ldr r1, [r9, #GD_RELOCADDR] /* dest_addr */ @@ -134,7 +142,6 @@ clbss_l:cmp r0, r1 /* while not at end of BSS */ ldr pc, =board_init_r /* this is auto-relocated! */ /* we should not return here. */ - #endif ENDPROC(_main) |