Merge http://git.denx.de/u-boot-sunxi

9 files changed, 562 insertions, 18 deletions

diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
index 5669f39..c562f62 100644
--- a/arch/arm/include/asm/arch-sunxi/clock.h
+++ b/arch/arm/include/asm/arch-sunxi/clock.h
@@ -15,12 +15,17 @@
 #define CLK_GATE_CLOSE			0x0
 
 /* clock control module regs definition */
+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
+#include <asm/arch/clock_sun6i.h>
+#else
 #include <asm/arch/clock_sun4i.h>
+#endif
 
 #ifndef __ASSEMBLY__
 int clock_init(void);
 int clock_twi_onoff(int port, int state);
 void clock_set_pll1(unsigned int hz);
+unsigned int clock_get_pll5p(void);
 unsigned int clock_get_pll6(void);
 void clock_init_safe(void);
 void clock_init_uart(void);
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
index 1ba997a..90af8e2 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
@@ -199,13 +199,16 @@ struct sunxi_ccm_reg {
 #define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3)
 #define CCM_PLL5_CTRL_M1_X(n) ((n) - 1)
 #define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4)
+#define CCM_PLL5_CTRL_K_SHIFT 4
 #define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3)
 #define CCM_PLL5_CTRL_K_X(n) ((n) - 1)
 #define CCM_PLL5_CTRL_LDO (0x1 << 7)
 #define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8)
+#define CCM_PLL5_CTRL_N_SHIFT 8
 #define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f)
 #define CCM_PLL5_CTRL_N_X(n) (n)
 #define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16)
+#define CCM_PLL5_CTRL_P_SHIFT 16
 #define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3)
 #define CCM_PLL5_CTRL_P_X(n) ((n) - 1)
 #define CCM_PLL5_CTRL_BW (0x1 << 18)
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
new file mode 100644
index 0000000..1397b35
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -0,0 +1,205 @@
+/*
+ * sun6i clock register definitions
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_CLOCK_SUN6I_H
+#define _SUNXI_CLOCK_SUN6I_H
+
+struct sunxi_ccm_reg {
+	u32 pll1_cfg;		/* 0x00 pll1 control */
+	u32 reserved0;
+	u32 pll2_cfg;		/* 0x08 pll2 control */
+	u32 reserved1;
+	u32 pll3_cfg;		/* 0x10 pll3 control */
+	u32 reserved2;
+	u32 pll4_cfg;		/* 0x18 pll4 control */
+	u32 reserved3;
+	u32 pll5_cfg;		/* 0x20 pll5 control */
+	u32 reserved4;
+	u32 pll6_cfg;		/* 0x28 pll6 control */
+	u32 reserved5;
+	u32 pll7_cfg;		/* 0x30 pll7 control */
+	u32 reserved6;
+	u32 pll8_cfg;		/* 0x38 pll8 control */
+	u32 reserved7;
+	u32 mipi_pll_cfg;	/* 0x40 MIPI pll control */
+	u32 pll9_cfg;		/* 0x44 pll9 control */
+	u32 pll10_cfg;		/* 0x48 pll10 control */
+	u32 reserved8;
+	u32 cpu_axi_cfg;	/* 0x50 CPU/AXI divide ratio */
+	u32 ahb1_apb1_div;	/* 0x54 AHB1/APB1 divide ratio */
+	u32 apb2_div;		/* 0x58 APB2 divide ratio */
+	u32 axi_gate;		/* 0x5c axi module clock gating */
+	u32 ahb_gate0;		/* 0x60 ahb module clock gating 0 */
+	u32 ahb_gate1;		/* 0x64 ahb module clock gating 1 */
+	u32 apb1_gate;		/* 0x68 apb1 module clock gating */
+	u32 apb2_gate;		/* 0x6c apb2 module clock gating */
+	u32 reserved9[4];
+	u32 nand0_clk_cfg;	/* 0x80 nand0 clock control */
+	u32 nand1_clk_cfg;	/* 0x84 nand1 clock control */
+	u32 sd0_clk_cfg;	/* 0x88 sd0 clock control */
+	u32 sd1_clk_cfg;	/* 0x8c sd1 clock control */
+	u32 sd2_clk_cfg;	/* 0x90 sd2 clock control */
+	u32 sd3_clk_cfg;	/* 0x94 sd3 clock control */
+	u32 ts_clk_cfg;		/* 0x98 transport stream clock control */
+	u32 ss_clk_cfg;		/* 0x9c security system clock control */
+	u32 spi0_clk_cfg;	/* 0xa0 spi0 clock control */
+	u32 spi1_clk_cfg;	/* 0xa4 spi1 clock control */
+	u32 spi2_clk_cfg;	/* 0xa8 spi2 clock control */
+	u32 spi3_clk_cfg;	/* 0xac spi3 clock control */
+	u32 i2s0_clk_cfg;	/* 0xb0 I2S0 clock control*/
+	u32 i2s1_clk_cfg;	/* 0xb4 I2S1 clock control */
+	u32 reserved10[2];
+	u32 spdif_clk_cfg;	/* 0xc0 SPDIF clock control */
+	u32 reserved11[2];
+	u32 usb_clk_cfg;	/* 0xcc USB clock control */
+	u32 gmac_clk_cfg;	/* 0xd0 GMAC clock control */
+	u32 reserved12[7];
+	u32 mdfs_clk_cfg;	/* 0xf0 MDFS clock control */
+	u32 dram_clk_cfg;	/* 0xf4 DRAM configuration clock control */
+	u32 reserved13[2];
+	u32 dram_clk_gate;	/* 0x100 DRAM module gating */
+	u32 be0_clk_cfg;	/* 0x104 BE0 module clock */
+	u32 be1_clk_cfg;	/* 0x108 BE1 module clock */
+	u32 fe0_clk_cfg;	/* 0x10c FE0 module clock */
+	u32 fe1_clk_cfg;	/* 0x110 FE1 module clock */
+	u32 mp_clk_cfg;		/* 0x114 MP module clock */
+	u32 lcd0_ch0_clk_cfg;	/* 0x118 LCD0 CH0 module clock */
+	u32 lcd1_ch0_clk_cfg;	/* 0x11c LCD1 CH0 module clock */
+	u32 reserved14[3];
+	u32 lcd0_ch1_clk_cfg;	/* 0x12c LCD0 CH1 module clock */
+	u32 lcd1_ch1_clk_cfg;	/* 0x130 LCD1 CH1 module clock */
+	u32 csi0_clk_cfg;	/* 0x134 CSI0 module clock */
+	u32 csi1_clk_cfg;	/* 0x138 CSI1 module clock */
+	u32 ve_clk_cfg;		/* 0x13c VE module clock */
+	u32 adda_clk_cfg;	/* 0x140 ADDA module clock */
+	u32 avs_clk_cfg;	/* 0x144 AVS module clock */
+	u32 dmic_clk_cfg;	/* 0x148 Digital Mic module clock*/
+	u32 reserved15;
+	u32 hdmi_clk_cfg;	/* 0x150 HDMI module clock */
+	u32 ps_clk_cfg;		/* 0x154 PS module clock */
+	u32 mtc_clk_cfg;	/* 0x158 MTC module clock */
+	u32 mbus0_clk_cfg;	/* 0x15c MBUS0 module clock */
+	u32 mbus1_clk_cfg;	/* 0x160 MBUS1 module clock */
+	u32 reserved16;
+	u32 mipi_dsi_clk_cfg;	/* 0x168 MIPI DSI clock control */
+	u32 mipi_csi_clk_cfg;	/* 0x16c MIPI CSI clock control */
+	u32 reserved17[4];
+	u32 iep_drc0_clk_cfg;	/* 0x180 IEP DRC0 module clock */
+	u32 iep_drc1_clk_cfg;	/* 0x184 IEP DRC1 module clock */
+	u32 iep_deu0_clk_cfg;	/* 0x188 IEP DEU0 module clock */
+	u32 iep_deu1_clk_cfg;	/* 0x18c IEP DEU1 module clock */
+	u32 reserved18[4];
+	u32 gpu_core_clk_cfg;	/* 0x1a0 GPU core clock config */
+	u32 gpu_mem_clk_cfg;	/* 0x1a4 GPU memory clock config */
+	u32 gpu_hyd_clk_cfg;	/* 0x1a0 GPU HYD clock config */
+	u32 reserved19[21];
+	u32 pll_lock;		/* 0x200 PLL Lock Time */
+	u32 pll1_lock;		/* 0x204 PLL1 Lock Time */
+	u32 reserved20[6];
+	u32 pll1_bias_cfg;	/* 0x220 PLL1 Bias config */
+	u32 pll2_bias_cfg;	/* 0x224 PLL2 Bias config */
+	u32 pll3_bias_cfg;	/* 0x228 PLL3 Bias config */
+	u32 pll4_bias_cfg;	/* 0x22c PLL4 Bias config */
+	u32 pll5_bias_cfg;	/* 0x230 PLL5 Bias config */
+	u32 pll6_bias_cfg;	/* 0x234 PLL6 Bias config */
+	u32 pll7_bias_cfg;	/* 0x238 PLL7 Bias config */
+	u32 pll8_bias_cfg;	/* 0x23c PLL8 Bias config */
+	u32 mipi_bias_cfg;	/* 0x240 MIPI Bias config */
+	u32 pll9_bias_cfg;	/* 0x244 PLL9 Bias config */
+	u32 pll10_bias_cfg;	/* 0x248 PLL10 Bias config */
+	u32 reserved21[13];
+	u32 pll1_pattern_cfg;	/* 0x280 PLL1 Pattern config */
+	u32 pll2_pattern_cfg;	/* 0x284 PLL2 Pattern config */
+	u32 pll3_pattern_cfg;	/* 0x288 PLL3 Pattern config */
+	u32 pll4_pattern_cfg;	/* 0x28c PLL4 Pattern config */
+	u32 pll5_pattern_cfg;	/* 0x290 PLL5 Pattern config */
+	u32 pll6_pattern_cfg;	/* 0x294 PLL6 Pattern config */
+	u32 pll7_pattern_cfg;	/* 0x298 PLL7 Pattern config */
+	u32 pll8_pattern_cfg;	/* 0x29c PLL8 Pattern config */
+	u32 mipi_pattern_cfg;	/* 0x2a0 MIPI Pattern config */
+	u32 pll9_pattern_cfg;	/* 0x2a4 PLL9 Pattern config */
+	u32 pll10_pattern_cfg;	/* 0x2a8 PLL10 Pattern config */
+	u32 reserved22[5];
+	u32 ahb_reset0_cfg;	/* 0x2c0 AHB1 Reset 0 config */
+	u32 ahb_reset1_cfg;	/* 0x2c4 AHB1 Reset 1 config */
+	u32 ahb_reset2_cfg;	/* 0x2c8 AHB1 Reset 2 config */
+	u32 reserved23;
+	u32 apb1_reset_cfg;	/* 0x2d0 APB1 Reset config */
+	u32 reserved24;
+	u32 apb2_reset_cfg;	/* 0x2d8 APB2 Reset config */
+};
+
+/* apb2 bit field */
+#define APB2_CLK_SRC_LOSC		(0x0 << 24)
+#define APB2_CLK_SRC_OSC24M		(0x1 << 24)
+#define APB2_CLK_SRC_PLL6		(0x2 << 24)
+#define APB2_CLK_SRC_MASK		(0x3 << 24)
+#define APB2_CLK_RATE_N_1		(0x0 << 16)
+#define APB2_CLK_RATE_N_2		(0x1 << 16)
+#define APB2_CLK_RATE_N_4		(0x2 << 16)
+#define APB2_CLK_RATE_N_8		(0x3 << 16)
+#define APB2_CLK_RATE_N_MASK		(3 << 16)
+#define APB2_CLK_RATE_M(m)		(((m)-1) << 0)
+#define APB2_CLK_RATE_M_MASK            (0x1f << 0)
+
+/* apb2 gate field */
+#define APB2_GATE_UART_SHIFT	(16)
+#define APB2_GATE_UART_MASK		(0xff << APB2_GATE_UART_SHIFT)
+#define APB2_GATE_TWI_SHIFT	(0)
+#define APB2_GATE_TWI_MASK		(0xf << APB2_GATE_TWI_SHIFT)
+
+/* cpu_axi_cfg bits */
+#define AXI_DIV_SHIFT			0
+#define ATB_DIV_SHIFT			8
+#define CPU_CLK_SRC_SHIFT		16
+
+#define AXI_DIV_1			0
+#define AXI_DIV_2			1
+#define AXI_DIV_3			2
+#define AXI_DIV_4			3
+#define ATB_DIV_1			0
+#define ATB_DIV_2			1
+#define ATB_DIV_4			2
+#define CPU_CLK_SRC_OSC24M		1
+#define CPU_CLK_SRC_PLL1		2
+
+#define PLL1_CFG_DEFAULT		0x90011b21
+
+#define PLL6_CFG_DEFAULT		0x90041811
+
+#define CCM_PLL6_CTRL_N_SHIFT		8
+#define CCM_PLL6_CTRL_N_MASK		(0x1f << CCM_PLL6_CTRL_N_SHIFT)
+#define CCM_PLL6_CTRL_K_SHIFT		4
+#define CCM_PLL6_CTRL_K_MASK		(0x3 << CCM_PLL6_CTRL_K_SHIFT)
+
+#define AHB_GATE_OFFSET_MMC3		11
+#define AHB_GATE_OFFSET_MMC2		10
+#define AHB_GATE_OFFSET_MMC1		9
+#define AHB_GATE_OFFSET_MMC0		8
+#define AHB_GATE_OFFSET_MMC(n)		(AHB_GATE_OFFSET_MMC0 + (n))
+
+#define CCM_MMC_CTRL_OSCM24 (0x0 << 24)
+#define CCM_MMC_CTRL_PLL6   (0x1 << 24)
+
+#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
+
+#define AHB_RESET_OFFSET_MMC3		11
+#define AHB_RESET_OFFSET_MMC2		10
+#define AHB_RESET_OFFSET_MMC1		9
+#define AHB_RESET_OFFSET_MMC0		8
+#define AHB_RESET_OFFSET_MMC(n)		(AHB_RESET_OFFSET_MMC0 + (n))
+
+/* apb2 reset */
+#define APB2_RESET_UART_SHIFT		(16)
+#define APB2_RESET_UART_MASK		(0xff << APB2_RESET_UART_SHIFT)
+#define APB2_RESET_TWI_SHIFT		(0)
+#define APB2_RESET_TWI_MASK		(0xf << APB2_RESET_TWI_SHIFT)
+
+#endif /* _SUNXI_CLOCK_SUN6I_H */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h
index a987e51d..0de79a0 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu.h
@@ -95,6 +95,11 @@
 #define SUNXI_MALI400_BASE		0x01c40000
 #define SUNXI_GMAC_BASE			0x01c50000
 
+#define SUNXI_DRAM_COM_BASE		0x01c62000
+#define SUNXI_DRAM_CTL_BASE		0x01c63000
+#define SUNXI_DRAM_PHY_CH1_BASE		0x01c65000
+#define SUNXI_DRAM_PHY_CH2_BASE		0x01c66000
+
 /* module sram */
 #define SUNXI_SRAM_C_BASE		0x01d00000
 
@@ -105,6 +110,11 @@
 #define SUNXI_MP_BASE			0x01e80000
 #define SUNXI_AVG_BASE			0x01ea0000
 
+#define SUNXI_PRCM_BASE			0x01f01400
+#define SUNXI_R_UART_BASE		0x01f02800
+#define SUNXI_R_PIO_BASE		0x01f02c00
+#define SUNXI_P2WI_BASE			0x01f03400
+
 /* CoreSight Debug Module */
 #define SUNXI_CSDM_BASE			0x3f500000
 
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index f7f3d8c..7bb6499 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -10,6 +10,7 @@
 #define _SUNXI_GPIO_H
 
 #include <linux/types.h>
+#include <asm/arch/cpu.h>
 
 /*
  * sunxi has 9 banks of gpio, they are:
@@ -27,8 +28,27 @@
 #define SUNXI_GPIO_G	6
 #define SUNXI_GPIO_H	7
 #define SUNXI_GPIO_I	8
+
+/*
+ * This defines the number of GPIO banks for the _main_ GPIO controller.
+ * You should fix up the padding in struct sunxi_gpio_reg below if you
+ * change this.
+ */
 #define SUNXI_GPIO_BANKS 9
 
+/*
+ * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO)
+ * at a different register offset.
+ *
+ * sun6i has 2 banks:
+ * PL0 - PL8  | PM0 - PM7
+ *
+ * sun8i has 1 bank:
+ * PL0 - PL11
+ */
+#define SUNXI_GPIO_L	11
+#define SUNXI_GPIO_M	12
+
 struct sunxi_gpio {
 	u32 cfg[4];
 	u32 dat;
@@ -50,8 +70,9 @@ struct sunxi_gpio_reg {
 	struct sunxi_gpio_int gpio_int;
 };
 
-#define BANK_TO_GPIO(bank) \
-	&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]
+#define BANK_TO_GPIO(bank)	(((bank) < SUNXI_GPIO_L) ? \
+	&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
+	&((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L])
 
 #define GPIO_BANK(pin)		((pin) >> 5)
 #define GPIO_NUM(pin)		((pin) & 0x1f)
@@ -75,6 +96,8 @@ struct sunxi_gpio_reg {
 #define SUNXI_GPIO_G_NR		32
 #define SUNXI_GPIO_H_NR		32
 #define SUNXI_GPIO_I_NR		32
+#define SUNXI_GPIO_L_NR		32
+#define SUNXI_GPIO_M_NR		32
 
 #define SUNXI_GPIO_NEXT(__gpio) \
 	((__gpio##_START) + (__gpio##_NR) + 0)
@@ -89,6 +112,8 @@ enum sunxi_gpio_number {
 	SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
 	SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
 	SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
+	SUNXI_GPIO_L_START = 352,
+	SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
 };
 
 /* SUNXI GPIO number definitions */
@@ -101,6 +126,8 @@ enum sunxi_gpio_number {
 #define SUNXI_GPG(_nr)	(SUNXI_GPIO_G_START + (_nr))
 #define SUNXI_GPH(_nr)	(SUNXI_GPIO_H_START + (_nr))
 #define SUNXI_GPI(_nr)	(SUNXI_GPIO_I_START + (_nr))
+#define SUNXI_GPL(_nr)	(SUNXI_GPIO_L_START + (_nr))
+#define SUNXI_GPM(_nr)	(SUNXI_GPIO_M_START + (_nr))
 
 /* GPIO pin function config */
 #define SUNXI_GPIO_INPUT	0
@@ -117,6 +144,8 @@ enum sunxi_gpio_number {
 #define SUN5I_GPB19_UART0_TX	2
 #define SUN5I_GPB20_UART0_RX	2
 
+#define SUN5I_GPG3_SDC1		2
+
 #define SUN5I_GPG3_UART1_TX	4
 #define SUN5I_GPG4_UART1_RX	4
 
@@ -125,15 +154,27 @@ enum sunxi_gpio_number {
 #define SUNXI_GPF0_SDC0		2
 
 #define SUNXI_GPF2_SDC0		2
+
+#ifdef CONFIG_SUN8I
+#define SUNXI_GPF2_UART0_TX	3
+#define SUNXI_GPF4_UART0_RX	3
+#else
 #define SUNXI_GPF2_UART0_TX	4
 #define SUNXI_GPF4_UART0_RX	4
+#endif
 
 #define SUN4I_GPG0_SDC1		4
 
 #define SUN4I_GPH22_SDC1	5
 
+#define SUN6I_GPH20_UART0_TX	2
+#define SUN6I_GPH21_UART0_RX	2
+
 #define SUN4I_GPI4_SDC3		2
 
+#define SUN8I_GPL2_R_UART_TX	2
+#define SUN8I_GPL3_R_UART_RX	2
+
 /* GPIO pin pull-up/down config */
 #define SUNXI_GPIO_PULL_DISABLE	0
 #define SUNXI_GPIO_PULL_UP	1
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
index 53196e3..8a21674 100644
--- a/arch/arm/include/asm/arch-sunxi/mmc.h
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -43,7 +43,10 @@ struct sunxi_mmc {
 	u32 chda;		/* 0x90 */
 	u32 cbda;		/* 0x94 */
 	u32 res1[26];
-	u32 fifo;		/* 0x100 FIFO access address */
+#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
+	u32 res2[64];
+#endif
+	u32 fifo;		/* 0x100 (0x200 on sun6i) FIFO access address */
 };
 
 #define SUNXI_MMC_CLK_POWERSAVE		(0x1 << 17)
@@ -120,5 +123,5 @@ struct sunxi_mmc {
 #define SUNXI_MMC_IDIE_TXIRQ		(0x1 << 0)
 #define SUNXI_MMC_IDIE_RXIRQ		(0x1 << 1)
 
-int sunxi_mmc_init(int sdc_no);
+struct mmc *sunxi_mmc_init(int sdc_no);
 #endif /* _SUNXI_MMC_H */
diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
new file mode 100644
index 0000000..3d3bfa6
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -0,0 +1,238 @@
+/*
+ * Sunxi A31 Power Management Unit register definition.
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_PRCM_H
+#define _SUNXI_PRCM_H
+
+#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4)
+#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3)
+#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1)
+#define PRCM_CPUS_CFG_PRE_DIV(n) \
+	__PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n))
+#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8)
+#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f)
+#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1)
+#define PRCM_CPUS_CFG_POST_DIV(n) \
+	__PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n))
+#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16)
+#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3)
+#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0
+#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1
+#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2
+#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3
+#define PRCM_CPUS_CFG_CLK_SRC_LOSC \
+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC)
+#define PRCM_CPUS_CFG_CLK_SRC_HOSC \
+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC)
+#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \
+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6)
+#define PRCM_CPUS_CFG_CLK_SRC_PDIV \
+	__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV)
+
+#define __PRCM_APB0_RATIO(n) (((n) & 0x3) << 0)
+#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3)
+#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1)
+#define PRCM_APB0_RATIO_DIV(n) \
+	__PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n))
+
+#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0)
+#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1)
+
+#define PRCM_APB0_GATE_PIO (0x1 << 0)
+#define PRCM_APB0_GATE_IR (0x1 << 1)
+#define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
+#define PRCM_APB0_GATE_P2WI (0x1 << 3)
+#define PRCM_APB0_GATE_UART (0x1 << 4)
+#define PRCM_APB0_GATE_1WIRE (0x1 << 5)
+#define PRCM_APB0_GATE_I2C (0x1 << 6)
+
+#define PRCM_APB0_RESET_PIO (0x1 << 0)
+#define PRCM_APB0_RESET_IR (0x1 << 1)
+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
+#define PRCM_APB0_RESET_UART (0x1 << 4)
+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
+#define PRCM_APB0_RESET_I2C (0x1 << 6)
+
+#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0)
+#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1)
+#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4)
+#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(0x3)
+#define __PRCM_PLL_CTRL_USB_CLK_0 0x0
+#define __PRCM_PLL_CTRL_USB_CLK_1 0x1
+#define __PRCM_PLL_CTRL_USB_CLK_2 0x2
+#define __PRCM_PLL_CTRL_USB_CLK_3 0x3
+#define PRCM_PLL_CTRL_USB_CLK_0 \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0)
+#define PRCM_PLL_CTRL_USB_CLK_1 \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1)
+#define PRCM_PLL_CTRL_USB_CLK_2 \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2)
+#define PRCM_PLL_CTRL_USB_CLK_3 \
+	__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3)
+#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12)
+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \
+	__PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3)
+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \
+	__PRCM_PLL_CTRL_INT_PLL_IN_SEL(n)
+#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20)
+#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3)
+#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0
+#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1
+#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2
+#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3
+#define PRCM_PLL_CTRL_HOSC_CLK_0 \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0)
+#define PRCM_PLL_CTRL_HOSC_CLK_1 \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1)
+#define PRCM_PLL_CTRL_HOSC_CLK_2 \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2)
+#define PRCM_PLL_CTRL_HOSC_CLK_3 \
+	__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3)
+#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24)
+#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0)
+#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1)
+#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2)
+#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3)
+#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */
+#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16)
+#define PRCM_PLL_CTRL_LDO_OUT_MASK \
+	__PRCM_PLL_CTRL_LDO_OUT(0x7)
+/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
+#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
+	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
+#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
+
+#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
+
+#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0)
+#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf)
+#define __PRCM_CLK_MOD0_M_X(n) (n - 1)
+#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n))
+#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8)
+#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7)
+#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16)
+#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3)
+#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) - 1)
+#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n))
+#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20)
+#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7)
+#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24)
+#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7)
+#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31)
+
+#define PRCM_APB0_RESET_PIO (0x1 << 0)
+#define PRCM_APB0_RESET_IR (0x1 << 1)
+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
+#define PRCM_APB0_RESET_UART (0x1 << 4)
+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
+#define PRCM_APB0_RESET_I2C (0x1 << 6)
+
+#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8)
+#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7)
+#define __PRCM_CLK_OUTD_M_X() ((n) - 1)
+#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n))
+#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20)
+#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7)
+#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1)
+#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n)
+#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24)
+#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3)
+#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0
+#define __PRCM_CLK_OUTD_SRC_LOSC 0x1
+#define __PRCM_CLK_OUTD_SRC_HOSC 0x2
+#define __PRCM_CLK_OUTD_SRC_ERR 0x3
+#define PRCM_CLK_OUTD_SRC_LOSC2 \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2)
+#define PRCM_CLK_OUTD_SRC_LOSC \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC)
+#define PRCM_CLK_OUTD_SRC_HOSC \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC)
+#define PRCM_CLK_OUTD_SRC_ERR \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR)
+#define PRCM_CLK_OUTD_EN (0x1 << 31)
+
+#define PRCM_CPU0_PWROFF (0x1 << 0)
+#define PRCM_CPU1_PWROFF (0x1 << 1)
+#define PRCM_CPU2_PWROFF (0x1 << 2)
+#define PRCM_CPU3_PWROFF (0x1 << 3)
+#define PRCM_CPU_ALL_PWROFF (0xf << 0)
+
+#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0)
+#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1)
+#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2)
+#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3)
+
+#define PRCM_VDD_GPU_PWROFF (0x1 << 0)
+
+#define PRCM_VDD_SYS_RESET (0x1 << 0)
+
+#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff)
+
+#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff)
+
+#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
+
+#ifndef __ASSEMBLY__
+struct sunxi_prcm_reg {
+	u32 cpus_cfg;		/* 0x000 */
+	u8 res0[0x8];		/* 0x004 */
+	u32 apb0_ratio;		/* 0x00c */
+	u32 cpu0_cfg;		/* 0x010 */
+	u32 cpu1_cfg;		/* 0x014 */
+	u32 cpu2_cfg;		/* 0x018 */
+	u32 cpu3_cfg;		/* 0x01c */
+	u8 res1[0x8];		/* 0x020 */
+	u32 apb0_gate;		/* 0x028 */
+	u8 res2[0x14];		/* 0x02c */
+	u32 pll_ctrl0;		/* 0x040 */
+	u32 pll_ctrl1;		/* 0x044 */
+	u8 res3[0x8];		/* 0x048 */
+	u32 clk_1wire;		/* 0x050 */
+	u32 clk_ir;		/* 0x054 */
+	u8 res4[0x58];		/* 0x058 */
+	u32 apb0_reset;		/* 0x0b0 */
+	u8 res5[0x3c];		/* 0x0b4 */
+	u32 clk_outd;		/* 0x0f0 */
+	u8 res6[0xc];		/* 0x0f4 */
+	u32 cpu_pwroff;		/* 0x100 */
+	u8 res7[0xc];		/* 0x104 */
+	u32 vdd_sys_pwroff;	/* 0x110 */
+	u8 res8[0x4];		/* 0x114 */
+	u32 gpu_pwroff;		/* 0x118 */
+	u8 res9[0x4];		/* 0x11c */
+	u32 vdd_pwr_reset;	/* 0x120 */
+	u8 res10[0x20];		/* 0x124 */
+	u32 cpu1_pwr_clamp;	/* 0x144 */
+	u32 cpu2_pwr_clamp;	/* 0x148 */
+	u32 cpu3_pwr_clamp;	/* 0x14c */
+	u8 res11[0x30];		/* 0x150 */
+	u32 dram_pwr;		/* 0x180 */
+	u8 res12[0xc];		/* 0x184 */
+	u32 dram_tst;		/* 0x190 */
+};
+
+void prcm_apb0_enable(u32 flags);
+#endif /* __ASSEMBLY__ */
+#endif /* _PRCM_H */
diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h
index 58e14fd..03a0684 100644
--- a/arch/arm/include/asm/arch-sunxi/timer.h
+++ b/arch/arm/include/asm/arch-sunxi/timer.h
@@ -11,14 +11,10 @@
 #ifndef _SUNXI_TIMER_H_
 #define _SUNXI_TIMER_H_
 
-#define WDT_CTRL_RESTART	(0x1 << 0)
-#define WDT_CTRL_KEY		(0x0a57 << 1)
-#define WDT_MODE_EN		(0x1 << 0)
-#define WDT_MODE_RESET_EN	(0x1 << 1)
-
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <asm/arch/watchdog.h>
 
 /* General purpose timer */
 struct sunxi_timer {
@@ -43,12 +39,6 @@ struct sunxi_64cnt {
 	u32 hi;			/* 0xa8 */
 };
 
-/* Watchdog */
-struct sunxi_wdog {
-	u32 ctl;		/* 0x90 */
-	u32 mode;		/* 0x94 */
-};
-
 /* Rtc */
 struct sunxi_rtc {
 	u32 ctl;		/* 0x100 */
@@ -77,15 +67,20 @@ struct sunxi_timer_reg {
 	struct sunxi_timer timer[6];	/* We have 6 timers */
 	u8 res2[16];
 	struct sunxi_avs avs;
-	struct sunxi_wdog wdog;
-	u8 res3[8];
-	struct sunxi_64cnt cnt64;
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+	struct sunxi_wdog wdog;	/* 0x90 */
+	/* XXX the following is not accurate for sun5i/sun7i */
+	struct sunxi_64cnt cnt64;	/* 0xa0 */
 	u8 res4[0x58];
 	struct sunxi_rtc rtc;
 	struct sunxi_alarm alarm;
 	struct sunxi_tgp tgp[4];
 	u8 res5[8];
 	u32 cpu_cfg;
+#else /* CONFIG_SUN6I || CONFIG_SUN8I || ... */
+	u8 res3[16];
+	struct sunxi_wdog wdog[5];	/* We have 5 watchdogs */
+#endif
 };
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h
new file mode 100644
index 0000000..ccc8fa3
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/watchdog.h
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2014
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * Watchdog register definitions
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_WATCHDOG_H_
+#define _SUNXI_WATCHDOG_H_
+
+#define WDT_CTRL_RESTART	(0x1 << 0)
+#define WDT_CTRL_KEY		(0x0a57 << 1)
+
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+
+#define WDT_MODE_EN		(0x1 << 0)
+#define WDT_MODE_RESET_EN	(0x1 << 1)
+
+struct sunxi_wdog {
+	u32 ctl;		/* 0x00 */
+	u32 mode;		/* 0x04 */
+	u32 res[2];
+};
+
+#else
+
+#define WDT_CFG_RESET		(0x1)
+#define WDT_MODE_EN		(0x1)
+
+struct sunxi_wdog {
+	u32 irq_en;		/* 0x00 */
+	u32 irq_sta;		/* 0x04 */
+	u32 res1[2];
+	u32 ctl;		/* 0x10 */
+	u32 cfg;		/* 0x14 */
+	u32 mode;		/* 0x18 */
+	u32 res2;
+};
+
+#endif
+
+#endif /* _SUNXI_WATCHDOG_H_ */