diff options
author | Tim Harvey <tharvey@gateworks.com> | 2014-06-02 16:13:23 -0700 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2014-06-06 10:07:26 +0200 |
commit | fe0f7f7842e109b9e04e455787d35bf3b21027c2 (patch) | |
tree | 83ebfdc20df65570e699599796432a6f7b731fc4 /arch/arm/include/asm | |
parent | 8d05b161fc4633788bcad133efdf8d76fc40237f (diff) | |
download | u-boot-imx-fe0f7f7842e109b9e04e455787d35bf3b21027c2.zip u-boot-imx-fe0f7f7842e109b9e04e455787d35bf3b21027c2.tar.gz u-boot-imx-fe0f7f7842e109b9e04e455787d35bf3b21027c2.tar.bz2 |
mx6: add mmdc configuration for MX6Q/MX6DL
- add function for configuring iomux based on board-specific regs
- add function for configuring mmdc based on board-specific and
chip-specific data
Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Diffstat (limited to 'arch/arm/include/asm')
-rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6-ddr.h | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index c2a31d2..d544d2e 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -173,6 +173,78 @@ struct mx6sdl_iomux_grp_regs { u32 res4; u32 grp_b6ds; }; + +/* Device Information: Varies per DDR3 part number and speed grade */ +struct mx6_ddr3_cfg { + u16 mem_speed; /* ie 1600 for DDR3-1600 (800,1066,1333,1600) */ + u8 density; /* chip density (Gb) (1,2,4,8) */ + u8 width; /* bus width (bits) (4,8,16) */ + u8 banks; /* number of banks */ + u8 rowaddr; /* row address bits (11-16)*/ + u8 coladdr; /* col address bits (9-12) */ + u8 pagesz; /* page size (K) (1-2) */ + u16 trcd; /* tRCD=tRP=CL (ns*100) */ + u16 trcmin; /* tRC min (ns*100) */ + u16 trasmin; /* tRAS min (ns*100) */ + u8 SRT; /* self-refresh temperature: 0=normal, 1=extended */ +}; + +/* System Information: Varies per board design, layout, and term choices */ +struct mx6_ddr_sysinfo { + u8 dsize; /* size of bus (in dwords: 0=16bit,1=32bit,2=64bit) */ + u8 cs_density; /* density per chip select (Gb) */ + u8 ncs; /* number chip selects used (1|2) */ + char cs1_mirror;/* enable address mirror (0|1) */ + char bi_on; /* Bank interleaving enable */ + u8 rtt_nom; /* Rtt_Nom (DDR3_RTT_*) */ + u8 rtt_wr; /* Rtt_Wr (DDR3_RTT_*) */ + u8 ralat; /* Read Additional Latency (0-7) */ + u8 walat; /* Write Additional Latency (0-3) */ + u8 mif3_mode; /* Command prediction working mode */ + u8 rst_to_cke; /* Time from SDE enable to CKE rise */ + u8 sde_to_rst; /* Time from SDE enable until DDR reset# is high */ +}; + +/* + * Board specific calibration: + * This includes write leveling calibration values as well as DQS gating + * and read/write delays. These values are board/layout/device specific. + * Freescale recommends using the i.MX6 DDR Stress Test Tool V1.0.2 + * (DOC-96412) to determine these values over a range of boards and + * temperatures. + */ +struct mx6_mmdc_calibration { + /* write leveling calibration */ + u32 p0_mpwldectrl0; + u32 p0_mpwldectrl1; + u32 p1_mpwldectrl0; + u32 p1_mpwldectrl1; + /* read DQS gating */ + u32 p0_mpdgctrl0; + u32 p0_mpdgctrl1; + u32 p1_mpdgctrl0; + u32 p1_mpdgctrl1; + /* read delay */ + u32 p0_mprddlctl; + u32 p1_mprddlctl; + /* write delay */ + u32 p0_mpwrdlctl; + u32 p1_mpwrdlctl; +}; + +/* configure iomux (pinctl/padctl) */ +void mx6dq_dram_iocfg(unsigned width, + const struct mx6dq_iomux_ddr_regs *, + const struct mx6dq_iomux_grp_regs *); +void mx6sdl_dram_iocfg(unsigned width, + const struct mx6sdl_iomux_ddr_regs *, + const struct mx6sdl_iomux_grp_regs *); + +/* configure mx6 mmdc registers */ +void mx6_dram_cfg(const struct mx6_ddr_sysinfo *, + const struct mx6_mmdc_calibration *, + const struct mx6_ddr3_cfg *); + #endif /* CONFIG_SPL_BUILD */ #define MX6_MMDC_P0_MDCTL 0x021b0000 |