Tegra30: Cardhu: Add pad config tables/code based on pinmux code

Pad config registers exist in APB_MISC_GP space, and control slew
rate, drive strengh, schmidt, high-speed, and low-power modes for
all of the pingroups in Tegra30. This builds off of the pinmux
way of constructing init tables to configure select pads (SDIOCFG,
for instance) during pinmux_init().

Currently, only SDIO1CFG is changed as per the TRM to work with
the SD-card slot on Cardhu.

Thanks to StephenW for the suggestion/original idea.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>

2 files changed, 72 insertions, 1 deletions

diff --git a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
index 9b383d0..23d184f 100644
--- a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
@@ -56,4 +56,10 @@ struct apb_misc_gp_ctlr {
 	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
 };
 
+/* SDMMC1/3 settings from section 24.6 of T30 TRM */
+#define SDIOCFG_DRVUP_SLWF	1
+#define SDIOCFG_DRVDN_SLWR	1
+#define SDIOCFG_DRVUP		0x2E
+#define SDIOCFG_DRVDN		0x2A
+
 #endif	/* _TEGRA30_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h
index 341951b..a9e1b46 100644
--- a/arch/arm/include/asm/arch-tegra30/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra30/pinmux.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -531,6 +531,63 @@ enum pmux_vddio {
 	PMUX_VDDIO_NONE
 };
 
+#define PGRP_SLWF_NONE	-1
+#define PGRP_SLWF_MAX	3
+#define	PGRP_SLWR_NONE	PGRP_SLWF_NONE
+#define PGRP_SLWR_MAX	PGRP_SLWF_MAX
+
+#define PGRP_DRVUP_NONE	-1
+#define PGRP_DRVUP_MAX	127
+#define	PGRP_DRVDN_NONE	PGRP_DRVUP_NONE
+#define PGRP_DRVDN_MAX	PGRP_DRVUP_MAX
+
+/* return 1 if a padgrp is in range */
+#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
+
+/* return 1 if a slew-rate rising/falling edge value is in range */
+#define pmux_pad_slw_isvalid(slw) (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX))
+
+/* return 1 if a driver output pull-up/down strength code value is in range */
+#define pmux_pad_drv_isvalid(drv) (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX))
+
+/* return 1 if a low-power mode value is in range */
+#define pmux_pad_lpmd_isvalid(lpm) (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X))
+
+/* Defines a pin group cfg's low-power mode select */
+enum pgrp_lpmd {
+	PGRP_LPMD_X8 = 0,
+	PGRP_LPMD_X4,
+	PGRP_LPMD_X2,
+	PGRP_LPMD_X,
+	PGRP_LPMD_NONE = -1,
+};
+
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pgrp_schmt {
+	PGRP_SCHMT_DISABLE = 0,
+	PGRP_SCHMT_ENABLE = 1,
+};
+
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pgrp_hsm {
+	PGRP_HSM_DISABLE = 0,
+	PGRP_HSM_ENABLE = 1,
+};
+
+/*
+ * This defines the configuration for a pin group's pad control config
+ */
+struct padctrl_config {
+	enum pdrive_pingrp padgrp;	/* pin group PDRIVE_PINGRP_x */
+	int slwf;			/* falling edge slew         */
+	int slwr;			/* rising edge slew          */
+	int drvup;			/* pull-up drive strength    */
+	int drvdn;			/* pull-down drive strength  */
+	enum pgrp_lpmd lpmd;		/* low-power mode selection  */
+	enum pgrp_schmt schmt;		/* schmidt enable            */
+	enum pgrp_hsm hsm;		/* high-speed mode enable    */
+};
+
 /* t30 pin drive group and pin mux registers */
 #define PDRIVE_PINGROUP_OFFSET	(0x868 >> 2)
 #define PMUX_OFFSET	((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
@@ -600,4 +657,12 @@ void pinmux_config_table(struct pingroup_config *config, int len);
 /* Set a group of pins from a table */
 void pinmux_init(void);
 
+/**
+ * Set the GP pad configs
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void padgrp_config_table(struct padctrl_config *config, int len);
+
 #endif	/* _TEGRA30_PINMUX_H_ */