MX: set a common place to share code for Freescale i.MX

Up now only MX5 and MX6 can share code, because they have
a common source directory in cpu/armv7. Other not armv7
i.MX can profit of the same shared code. Move these files
into a directory accessible for all, similar to plat-mxc
in linux.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 140 insertions, 0 deletions

diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
new file mode 100644
index 0000000..fa1d468
--- /dev/null
+++ b/arch/arm/imx-common/cpu.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+
+char *get_reset_cause(void)
+{
+	u32 cause;
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+
+	cause = readl(&src_regs->srsr);
+	writel(cause, &src_regs->srsr);
+
+	switch (cause) {
+	case 0x00001:
+	case 0x00011:
+		return "POR";
+	case 0x00004:
+		return "CSU";
+	case 0x00008:
+		return "IPP USER";
+	case 0x00010:
+		return "WDOG";
+	case 0x00020:
+		return "JTAG HIGH-Z";
+	case 0x00040:
+		return "JTAG SW";
+	case 0x10000:
+		return "WARM BOOT";
+	default:
+		return "unknown reset";
+	}
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+
+static const char *get_imx_type(u32 imxtype)
+{
+	switch (imxtype) {
+	case 0x63:
+		return "6Q";	/* Quad-core version of the mx6 */
+	case 0x61:
+		return "6DS";	/* Dual/Solo version of the mx6 */
+	case 0x60:
+		return "6SL";	/* Solo-Lite version of the mx6 */
+	case 0x51:
+		return "51";
+	case 0x53:
+		return "53";
+	default:
+		return "??";
+	}
+}
+
+int print_cpuinfo(void)
+{
+	u32 cpurev;
+
+	cpurev = get_cpu_rev();
+
+	printf("CPU:   Freescale i.MX%s rev%d.%d at %d MHz\n",
+		get_imx_type((cpurev & 0xFF000) >> 12),
+		(cpurev & 0x000F0) >> 4,
+		(cpurev & 0x0000F) >> 0,
+		mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("Reset cause: %s\n", get_reset_cause());
+	return 0;
+}
+#endif
+
+int cpu_eth_init(bd_t *bis)
+{
+	int rc = -ENODEV;
+
+#if defined(CONFIG_FEC_MXC)
+	rc = fecmxc_initialize(bis);
+#endif
+
+	return rc;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+/*
+ * Initializes on-chip MMC controllers.
+ * to override, implement board_mmc_init()
+ */
+int cpu_mmc_init(bd_t *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+void reset_cpu(ulong addr)
+{
+	__raw_writew(4, WDOG1_BASE_ADDR);
+}
+
+u32 get_ahb_clk(void)
+{
+	struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 reg, ahb_podf;
+
+	reg = __raw_readl(&imx_ccm->cbcdr);
+	reg &= MXC_CCM_CBCDR_AHB_PODF_MASK;
+	ahb_podf = reg >> MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+
+	return get_periph_clk() / (ahb_podf + 1);
+}