ARM: dts: dra7xx: sync DT with latest Linux

Sync all dra7xx based dts files with latest Linux

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

1 files changed, 584 insertions, 133 deletions

diff --git a/arch/arm/dts/dra7.dtsi b/arch/arm/dts/dra7.dtsi
index 0f242e6..5570e30 100644
--- a/arch/arm/dts/dra7.dtsi
+++ b/arch/arm/dts/dra7.dtsi
@@ -10,13 +10,11 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/dra.h>
 
-#include "skeleton.dtsi"
-
 #define MAX_SOURCES 400
 
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	compatible = "ti,dra7xx";
 	interrupt-parent = <&crossbar_mpu>;
@@ -57,10 +55,10 @@
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
+		reg = <0x0 0x48211000 0x0 0x1000>,
+		      <0x0 0x48212000 0x0 0x1000>,
+		      <0x0 0x48214000 0x0 0x2000>,
+		      <0x0 0x48216000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 		interrupt-parent = <&gic>;
 	};
@@ -69,10 +67,37 @@
 		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
+		reg = <0x0 0x48281000 0x0 0x1000>;
 		interrupt-parent = <&gic>;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -96,10 +121,10 @@
 		compatible = "ti,dra7-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x0 0x0 0xc0000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x1000000>,
-		      <0x45000000 0x1000>;
+		reg = <0x0 0x44000000 0x0 0x1000000>,
+		      <0x0 0x45000000 0x0 0x1000>;
 		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -117,13 +142,14 @@
 				ranges = <0 0x2000 0x2000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x1400>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0x0 0x1400>;
 
-					pbias_regulator: pbias_regulator {
-						compatible = "ti,pbias-omap";
+					pbias_regulator: pbias_regulator@e00 {
+						compatible = "ti,pbias-dra7", "ti,pbias-omap";
 						reg = <0xe00 0x4>;
 						syscon = <&scm_conf>;
 						pbias_mmc_reg: pbias_mmc_omap5 {
@@ -142,7 +168,7 @@
 				dra7_pmx_core: pinmux@1400 {
 					compatible = "ti,dra7-padconf",
 						     "pinctrl-single";
-					reg = <0x1400 0x0464>;
+					reg = <0x1400 0x0468>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#interrupt-cells = <1>;
@@ -150,6 +176,34 @@
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x3fffffff>;
 				};
+
+				scm_conf1: scm_conf@1c04 {
+					compatible = "syscon";
+					reg = <0x1c04 0x0020>;
+				};
+
+				scm_conf_pcie: scm_conf@1c24 {
+					compatible = "syscon";
+					reg = <0x1c24 0x0024>;
+				};
+
+				sdma_xbar: dma-router@b78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xb78 0xfc>;
+					#dma-cells = <1>;
+					dma-requests = <205>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&sdma>;
+				};
+
+				edma_xbar: dma-router@c78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xc78 0x7c>;
+					#dma-cells = <2>;
+					dma-requests = <204>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&edma>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -204,6 +258,11 @@
 				prm_clockdomains: clockdomains {
 				};
 			};
+
+			scm_wkup: scm_conf@c000 {
+				compatible = "syscon";
+				reg = <0xc000 0x1000>;
+			};
 		};
 
 		axi@0 {
@@ -212,7 +271,7 @@
 			#address-cells = <1>;
 			ranges = <0x51000000 0x51000000 0x3000
 				  0x0	     0x20000000 0x10000000>;
-			pcie@51000000 {
+			pcie1: pcie@51000000 {
 				compatible = "ti,dra7-pcie";
 				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
@@ -224,6 +283,7 @@
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <0>;
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
@@ -247,7 +307,7 @@
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
 			status = "disabled";
-			pcie@51000000 {
+			pcie@51800000 {
 				compatible = "ti,dra7-pcie";
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
@@ -259,6 +319,7 @@
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <1>;
 				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
@@ -275,6 +336,53 @@
 			};
 		};
 
+		ocmcram1: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x80000>;
+			ranges = <0x0 0x40300000 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * This is a placeholder for an optional reserved
+			 * region for use by secure software. The size
+			 * of this region is not known until runtime so it
+			 * is set as zero to either be updated to reserve
+			 * space or left unchanged to leave all SRAM for use.
+			 * On HS parts that that require the reserved region
+			 * either the bootloader can update the size to
+			 * the required amount or the node can be overridden
+			 * from the board dts file for the secure platform.
+			 */
+			sram-hs@0 {
+				compatible = "ti,secure-ram";
+				reg = <0x0 0x0>;
+			};
+		};
+
+		/*
+		 * NOTE: ocmcram2 and ocmcram3 are not available on all
+		 * DRA7xx and AM57xx variants. Confirm availability in
+		 * the data manual for the exact part number in use
+		 * before enabling these nodes in the board dts file.
+		 */
+		ocmcram2: ocmcram@40400000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40400000 0x100000>;
+			ranges = <0x0 0x40400000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		ocmcram3: ocmcram@40500000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40500000 0x100000>;
+			ranges = <0x0 0x40500000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		bandgap: bandgap@4a0021e0 {
 			reg = <0x4a0021e0 0xc
 				0x4a00232c 0xc
@@ -287,14 +395,9 @@
 				#thermal-sensor-cells = <1>;
 		};
 
-		dra7_ctrl_core: ctrl_core@4a002000 {
+		dsp1_system: dsp_system@40d00000 {
 			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
+			reg = <0x40d00000 0x100>;
 		};
 
 		sdma: dma-controller@4a056000 {
@@ -309,6 +412,45 @@
 			dma-requests = <127>;
 		};
 
+		edma: edma@43300000 {
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg = <0x43300000 0x100000>;
+			reg-names = "edma3_cc";
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "edma3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+			/*
+			 * memcpy is disabled, can be enabled with:
+			 * ti,edma-memcpy-channels = <20 21>;
+			 * for example. Note that these channels need to be
+			 * masked in the xbar as well.
+			 */
+		};
+
+		edma_tptc0: tptc@43400000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x43400000 0x100000>;
+			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@43500000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x43500000 0x100000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
@@ -398,79 +540,79 @@
 		};
 
 		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x4806a000 0x100>;
 			reg-shift = <2>;
 			interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 49>, <&sdma 50>;
+			dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 			dma-names = "tx", "rx";
 		};
 
 		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x4806c000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 51>, <&sdma 52>;
+			dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
 			dma-names = "tx", "rx";
 		};
 
 		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48020000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 53>, <&sdma 54>;
+			dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
 			dma-names = "tx", "rx";
 		};
 
 		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x4806e000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
                         status = "disabled";
-			dmas = <&sdma 55>, <&sdma 56>;
+			dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
 			dma-names = "tx", "rx";
 		};
 
 		uart5: serial@48066000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48066000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 63>, <&sdma 64>;
+			dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
 			dma-names = "tx", "rx";
 		};
 
 		uart6: serial@48068000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48068000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 79>, <&sdma 80>;
+			dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
 			dma-names = "tx", "rx";
 		};
 
 		uart7: serial@48420000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48420000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
@@ -480,7 +622,7 @@
 		};
 
 		uart8: serial@48422000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48422000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
@@ -490,7 +632,7 @@
 		};
 
 		uart9: serial@48424000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x48424000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
@@ -500,7 +642,7 @@
 		};
 
 		uart10: serial@4ae2b000 {
-			compatible = "ti,omap4-uart";
+			compatible = "ti,dra742-uart", "ti,omap4-uart";
 			reg = <0x4ae2b000 0x100>;
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
@@ -768,12 +910,20 @@
 			ti,hwmods = "timer11";
 		};
 
+		timer12: timer@4ae20000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae20000 0x80>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
+
 		timer13: timer@48828000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48828000 0x80>;
 			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer13";
-			status = "disabled";
 		};
 
 		timer14: timer@4882a000 {
@@ -781,7 +931,6 @@
 			reg = <0x4882a000 0x80>;
 			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer14";
-			status = "disabled";
 		};
 
 		timer15: timer@4882c000 {
@@ -789,7 +938,6 @@
 			reg = <0x4882c000 0x80>;
 			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer15";
-			status = "disabled";
 		};
 
 		timer16: timer@4882e000 {
@@ -797,7 +945,6 @@
 			reg = <0x4882e000 0x80>;
 			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer16";
-			status = "disabled";
 		};
 
 		wdt2: wdt@4ae14000 {
@@ -878,7 +1025,7 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
+			dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 			pbias-supply = <&pbias_mmc_reg>;
@@ -890,7 +1037,7 @@
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
+			dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -901,7 +1048,7 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
+			dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -912,11 +1059,51 @@
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
+			dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
+		mmu0_dsp1: mmu@40d01000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d01000 0x100>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp1: mmu@40d02000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d02000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			status = "disabled";
+		};
+
+		mmu_ipu1: mmu@58882000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x58882000 0x100>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu1";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
+		mmu_ipu2: mmu@55082000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu2";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
 		abb_mpu: regulator-abb-mpu {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_mpu";
@@ -1057,14 +1244,14 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
 			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
+			dmas = <&sdma_xbar 35>,
+			       <&sdma_xbar 36>,
+			       <&sdma_xbar 37>,
+			       <&sdma_xbar 38>,
+			       <&sdma_xbar 39>,
+			       <&sdma_xbar 40>,
+			       <&sdma_xbar 41>,
+			       <&sdma_xbar 42>;
 			dma-names = "tx0", "rx0", "tx1", "rx1",
 				    "tx2", "rx2", "tx3", "rx3";
 			status = "disabled";
@@ -1078,10 +1265,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
+			dmas = <&sdma_xbar 43>,
+			       <&sdma_xbar 44>,
+			       <&sdma_xbar 45>,
+			       <&sdma_xbar 46>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -1094,7 +1281,7 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
+			dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
@@ -1107,7 +1294,7 @@
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
 			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
+			dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
@@ -1115,10 +1302,9 @@
 		qspi: qspi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
 			reg = <0x4b300000 0x100>,
-			      <0x5c000000 0x4000000>,
-			      <0x4a002558 0x4>;
-			reg-names = "qspi_base", "qspi_mmap",
-				    "qspi_ctrlmod";
+			      <0x5c000000 0x4000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			syscon-chipselects = <&scm_conf 0x558>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "qspi";
@@ -1129,14 +1315,6 @@
 			status = "disabled";
 		};
 
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
 		/* OCP2SCP3 */
 		ocp2scp@4a090000 {
 			compatible = "ti,omap-ocp2scp";
@@ -1151,9 +1329,10 @@
 				      <0x4A096400 0x64>, /* phy_tx */
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
+				syscon-phy-power = <&scm_conf 0x374>;
 				clocks = <&sys_clkin1>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
+				syscon-pllreset = <&scm_conf 0x3fc>;
 				#phy-cells = <0>;
 			};
 
@@ -1162,16 +1341,18 @@
 				reg = <0x4a094000 0x80>, /* phy_rx */
 				      <0x4a094400 0x64>; /* phy_tx */
 				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie1phy>;
+				syscon-phy-power = <&scm_conf_pcie 0x1c>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
 					 <&optfclk_pciephy1_32khz>,
 					 <&optfclk_pciephy1_clk>,
 					 <&optfclk_pciephy1_div_clk>,
-					 <&optfclk_pciephy_div>;
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
 					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
+					      "div-clk", "phy-div", "sysclk";
 				#phy-cells = <0>;
 			};
 
@@ -1180,16 +1361,18 @@
 				reg = <0x4a095000 0x80>, /* phy_rx */
 				      <0x4a095400 0x64>; /* phy_tx */
 				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie2phy>;
+				syscon-phy-power = <&scm_conf_pcie 0x20>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
 					 <&optfclk_pciephy2_32khz>,
 					 <&optfclk_pciephy2_clk>,
 					 <&optfclk_pciephy2_div_clk>,
-					 <&optfclk_pciephy_div>;
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
 					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
+					      "div-clk", "phy-div", "sysclk";
 				#phy-cells = <0>;
 				status = "disabled";
 			};
@@ -1205,23 +1388,6 @@
 			ti,hwmods = "sata";
 		};
 
-		omap_control_pcie1phy: control-phy@0x4a003c40 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		omap_control_pcie2phy: control-pcie@0x4a003c44 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-			status = "disabled";
-		};
-
 		rtc: rtc@48838000 {
 			compatible = "ti,am3352-rtc";
 			reg = <0x48838000 0x100>;
@@ -1231,24 +1397,6 @@
 			clocks = <&sys_32k_ck>;
 		};
 
-		omap_control_usb2phy1: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy1: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb2phy2: control-phy@0x4a002e74 {
-			compatible = "ti,control-phy-usb2-dra7";
-			reg = <0x4a002e74 0x4>;
-			reg-names = "power";
-		};
-
 		/* OCP2SCP1 */
 		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
@@ -1259,9 +1407,9 @@
 			ti,hwmods = "ocp2scp1";
 
 			usb2_phy1: phy@4a084000 {
-				compatible = "ti,omap-usb2";
+				compatible = "ti,dra7x-usb2", "ti,omap-usb2";
 				reg = <0x4a084000 0x400>;
-				ctrl-module = <&omap_control_usb2phy1>;
+				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy1_always_on_clk32k>,
 					 <&usb_otg_ss1_refclk960m>;
 				clock-names =	"wkupclk",
@@ -1270,9 +1418,10 @@
 			};
 
 			usb2_phy2: phy@4a085000 {
-				compatible = "ti,omap-usb2";
+				compatible = "ti,dra7x-usb2-phy2",
+					     "ti,omap-usb2";
 				reg = <0x4a085000 0x400>;
-				ctrl-module = <&omap_control_usb2phy2>;
+				syscon-phy-power = <&scm_conf 0xe74>;
 				clocks = <&usb_phy2_always_on_clk32k>,
 					 <&usb_otg_ss2_refclk960m>;
 				clock-names =	"wkupclk",
@@ -1286,7 +1435,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy1>;
+				syscon-phy-power = <&scm_conf 0x370>;
 				clocks = <&usb_phy3_always_on_clk32k>,
 					 <&sys_clkin1>,
 					 <&usb_otg_ss1_refclk960m>;
@@ -1309,10 +1458,14 @@
 			usb1: usb@48890000 {
 				compatible = "snps,dwc3";
 				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1332,10 +1485,14 @@
 			usb2: usb@488d0000 {
 				compatible = "snps,dwc3";
 				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
-				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1357,8 +1514,12 @@
 			usb3: usb@48910000 {
 				compatible = "snps,dwc3";
 				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1379,10 +1540,16 @@
 			ti,hwmods = "gpmc";
 			reg = <0x50000000 0x37c>;      /* device IO registers */
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 4 0>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 			status = "disabled";
 		};
 
@@ -1397,6 +1564,136 @@
 			status = "disabled";
 		};
 
+		mcasp1: mcasp@48460000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x48460000 0x2000>,
+			      <0x45800000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
+				 <&mcasp1_ahclkr_mux>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			status = "disabled";
+		};
+
+		mcasp2: mcasp@48464000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp2";
+			reg = <0x48464000 0x2000>,
+			      <0x45c00000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
+				 <&mcasp2_ahclkr_mux>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			status = "disabled";
+		};
+
+		mcasp3: mcasp@48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>,
+			      <0x46000000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp4: mcasp@4846c000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp4";
+			reg = <0x4846c000 0x2000>,
+			      <0x48436000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp5: mcasp@48470000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp5";
+			reg = <0x48470000 0x2000>,
+			      <0x4843a000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp6: mcasp@48474000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp6";
+			reg = <0x48474000 0x2000>,
+			      <0x4844c000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp7: mcasp@48478000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp7";
+			reg = <0x48478000 0x2000>,
+			      <0x48450000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
+		mcasp8: mcasp@4847c000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp8";
+			reg = <0x4847c000 0x2000>,
+			      <0x48454000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
@@ -1412,25 +1709,34 @@
 		};
 
 		mac: ethernet@48484000 {
-			compatible = "ti,cpsw";
+			compatible = "ti,dra7-cpsw","ti,cpsw";
 			ti,hwmods = "gmac";
-			clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+			clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
 			clock-names = "fck", "cpts";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
 			bd_ram_size = <0x2000>;
 			no_bd_ram = <0>;
-			rx_descs = <64>;
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
+			cpts_clock_mult = <0x784CFE14>;
 			cpts_clock_shift = <29>;
 			syscon = <&scm_conf>;
 			reg = <0x48484000 0x1000
 			       0x48485200 0x2E00>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
 			/*
 			 * rx_thresh_pend
 			 * rx_pend
@@ -1445,7 +1751,7 @@
 			status = "disabled";
 
 			davinci_mdio: mdio@48485000 {
-				compatible = "ti,davinci_mdio";
+				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				ti,hwmods = "davinci_mdio";
@@ -1527,12 +1833,157 @@
 				clock-names = "fck", "sys_clk";
 			};
 		};
+
+		epwmss0: epwmss@4843e000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x4843e000 0x30>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm0: pwm@4843e200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x4843e200 0x80>;
+				clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap0: ecap@4843e100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x4843e100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48440000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48440000 0x30>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm1: pwm@48440200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48440200 0x80>;
+				clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap1: ecap@48440100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48440100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48442000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48442000 0x30>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm2: pwm@48442200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48442200 0x80>;
+				clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap2: ecap@48442100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48442100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		aes1: aes@4b500000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes1";
+			reg = <0x4b500000 0xa0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		aes2: aes@4b700000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes2";
+			reg = <0x4b700000 0xa0>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		des: des@480a5000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x480a5000 0xa0>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+			dma-names = "tx", "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x4b101000 0x300>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 119 0>;
+			dma-names = "rx";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		rng: rng@48090000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48090000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
 	};
 
 	thermal_zones: thermal-zones {
 		#include "omap4-cpu-thermal.dtsi"
 		#include "omap5-gpu-thermal.dtsi"
 		#include "omap5-core-thermal.dtsi"
+		#include "dra7-dspeve-thermal.dtsi"
+		#include "dra7-iva-thermal.dtsi"
 	};
 
 };