Merge branch 'master' of git://www.denx.de/git/u-boot-imx

7 files changed, 93 insertions, 45 deletions

diff --git a/arch/arm/cpu/arm926ejs/mx27/reset.c b/arch/arm/cpu/arm926ejs/mx27/reset.c
index f7b4a1c..e764986 100644
--- a/arch/arm/cpu/arm926ejs/mx27/reset.c
+++ b/arch/arm/cpu/arm926ejs/mx27/reset.c
@@ -27,14 +27,14 @@ void reset_cpu(ulong ignored)
 {
 	struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE;
 	/* Disable watchdog and set Time-Out field to 0 */
-	writel(0x00000000, &regs->wcr);
+	writew(0x0000, &regs->wcr);
 
 	/* Write Service Sequence */
-	writel(0x00005555, &regs->wsr);
-	writel(0x0000AAAA, &regs->wsr);
+	writew(0x5555, &regs->wsr);
+	writew(0xAAAA, &regs->wsr);
 
 	/* Enable watchdog */
-	writel(WCR_WDE, &regs->wcr);
+	writew(WCR_WDE, &regs->wcr);
 
 	while (1);
 	/*NOTREACHED*/
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index c72a150..1bcd399 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -60,6 +60,18 @@ config TARGET_CM_FX6
 config TARGET_EMBESTMX6BOARDS
 	bool "embestmx6boards"
 
+config TARGET_GE_B450V3
+	bool "General Electric B450v3"
+	select MX6Q
+
+config TARGET_GE_B650V3
+	bool "General Electric B650v3"
+	select MX6Q
+
+config TARGET_GE_B850V3
+	bool "General Electric B850v3"
+	select MX6Q
+
 config TARGET_GW_VENTANA
 	bool "gw_ventana"
 	select SUPPORT_SPL
@@ -92,12 +104,14 @@ config TARGET_MX6SLEVK
 
 config TARGET_MX6SXSABRESD
 	bool "mx6sxsabresd"
+	select MX6SX
 	select SUPPORT_SPL
 	select DM
 	select DM_THERMAL
 
 config TARGET_MX6SXSABREAUTO
         bool "mx6sxsabreauto"
+	select MX6SX
         select DM
         select DM_THERMAL
 
@@ -153,16 +167,25 @@ config TARGET_WANDBOARD
 config TARGET_WARP
 	bool "WaRP"
 
+config TARGET_XPRESS
+	bool "CCV xPress"
+	select MX6UL
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+
 endchoice
 
 config SYS_SOC
 	default "mx6"
 
+source "board/ge/bx50v3/Kconfig"
 source "board/aristainetos/Kconfig"
 source "board/bachmann/ot1200/Kconfig"
 source "board/barco/platinum/Kconfig"
 source "board/barco/titanium/Kconfig"
 source "board/boundary/nitrogen6x/Kconfig"
+source "board/ccv/xpress/Kconfig"
 source "board/compulab/cm_fx6/Kconfig"
 source "board/congatec/cgtqmx6eval/Kconfig"
 source "board/embest/mx6boards/Kconfig"
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 88380a6..3b53842 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -1183,6 +1183,7 @@ int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("PLL_NET    %8d MHz\n", freq / 1000000);
 
 	printf("\n");
+	printf("ARM        %8d kHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000);
 	printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
 	printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
 #ifdef CONFIG_MXC_SPI
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index e457feb..1e7ae28 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -12,40 +12,20 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <asm/types.h>
+#include <wait_bit.h>
 
 #if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
 
-static int wait_for_bit(void *reg, const uint32_t mask, bool set)
-{
-	unsigned int timeout = 1000;
-	u32 val;
-
-	while (--timeout) {
-		val = readl(reg);
-		if (!set)
-			val = ~val;
-
-		if ((val & mask) == mask)
-			return 0;
-
-		udelay(1);
-	}
-
-	printf("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
-	      __func__, reg, mask, set);
-	hang();	/* DRAM couldn't be calibrated, game over :-( */
-}
-
 static void reset_read_data_fifos(void)
 {
 	struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
 
 	/* Reset data FIFOs twice. */
 	setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
-	wait_for_bit(&mmdc0->mpdgctrl0, 1 << 31, 0);
+	wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
 
 	setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
-	wait_for_bit(&mmdc0->mpdgctrl0, 1 << 31, 0);
+	wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
 }
 
 static void precharge_all(const bool cs0_enable, const bool cs1_enable)
@@ -60,12 +40,12 @@ static void precharge_all(const bool cs0_enable, const bool cs1_enable)
 	 */
 	if (cs0_enable) { /* CS0 */
 		writel(0x04008050, &mmdc0->mdscr);
-		wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
+		wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
 	}
 
 	if (cs1_enable) { /* CS1 */
 		writel(0x04008058, &mmdc0->mdscr);
-		wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
+		wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
 	}
 }
 
@@ -164,7 +144,7 @@ int mmdc_do_write_level_calibration(void)
 	 * 7. Upon completion of this process the MMDC de-asserts
 	 * the MPWLGCR[HW_WL_EN]
 	 */
-	wait_for_bit(&mmdc0->mpwlgcr, 1 << 0, 0);
+	wait_for_bit("MMDC", &mmdc0->mpwlgcr, 1 << 0, 0, 100, 0);
 
 	/*
 	 * 8. check for any errors: check both PHYs for x64 configuration,
@@ -289,7 +269,7 @@ int mmdc_do_dqs_calibration(void)
 		writel(0x00008028, &mmdc0->mdscr);
 
 	/* poll to make sure the con_ack bit was asserted */
-	wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
+	wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
 
 	/*
 	 * Check MDMISC register CALIB_PER_CS to see which CS calibration
@@ -327,7 +307,7 @@ int mmdc_do_dqs_calibration(void)
 	 * this bit until it clears to indicate completion of the write access.
 	 */
 	setbits_le32(&mmdc0->mpswdar0, 1);
-	wait_for_bit(&mmdc0->mpswdar0, 1 << 0, 0);
+	wait_for_bit("MMDC", &mmdc0->mpswdar0, 1 << 0, 0, 100, 0);
 
 	/* Set the RD_DL_ABS# bits to their default values
 	 * (will be calibrated later in the read delay-line calibration).
@@ -372,7 +352,7 @@ int mmdc_do_dqs_calibration(void)
 	setbits_le32(&mmdc0->mpdgctrl0, 5 << 28);
 
 	/* Poll for completion.  MPDGCTRL0[HW_DG_EN] should be 0 */
-	wait_for_bit(&mmdc0->mpdgctrl0, 1 << 28, 0);
+	wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 28, 0, 100, 0);
 
 	/*
 	 * Check to see if any errors were encountered during calibration
@@ -431,7 +411,7 @@ int mmdc_do_dqs_calibration(void)
 	 * setting MPRDDLHWCTL[HW_RD_DL_EN] = 0.   Also, ensure that
 	 * no error bits were set.
 	 */
-	wait_for_bit(&mmdc0->mprddlhwctl, 1 << 4, 0);
+	wait_for_bit("MMDC", &mmdc0->mprddlhwctl, 1 << 4, 0, 100, 0);
 
 	/* check both PHYs for x64 configuration, if x32, check only PHY0 */
 	if (readl(&mmdc0->mprddlhwctl) & 0x0000000f)
@@ -484,7 +464,7 @@ int mmdc_do_dqs_calibration(void)
 	 * by setting MPWRDLHWCTL[HW_WR_DL_EN] = 0.
 	 * Also, ensure that no error bits were set.
 	 */
-	wait_for_bit(&mmdc0->mpwrdlhwctl, 1 << 4, 0);
+	wait_for_bit("MMDC", &mmdc0->mpwrdlhwctl, 1 << 4, 0, 100, 0);
 
 	/* Check both PHYs for x64 configuration, if x32, check only PHY0 */
 	if (readl(&mmdc0->mpwrdlhwctl) & 0x0000000f)
@@ -532,7 +512,7 @@ int mmdc_do_dqs_calibration(void)
 	writel(0x0, &mmdc0->mdscr);	/* CS0 */
 
 	/* Poll to make sure the con_ack bit is clear */
-	wait_for_bit(&mmdc0->mdscr, 1 << 14, 0);
+	wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 0, 100, 0);
 
 	/*
 	 * Print out the registers that were updated as a result
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 91a3deb..d4b22ad 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -278,7 +278,10 @@ static void clear_mmdc_ch_mask(void)
 	reg = readl(&mxc_ccm->ccdr);
 
 	/* Clear MMDC channel mask */
-	reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
+	if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || is_cpu_type(MXC_CPU_MX6SL))
+		reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
+	else
+		reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
 	writel(reg, &mxc_ccm->ccdr);
 }
 
@@ -325,15 +328,30 @@ int arch_cpu_init(void)
 	 */
 	init_bandgap();
 
-	/*
-	 * When low freq boot is enabled, ROM will not set AHB
-	 * freq, so we need to ensure AHB freq is 132MHz in such
-	 * scenario.
-	 */
-	if (mxc_get_clock(MXC_ARM_CLK) == 396000000)
-		set_ahb_rate(132000000);
+	if (!IS_ENABLED(CONFIG_MX6UL)) {
+		/*
+		 * When low freq boot is enabled, ROM will not set AHB
+		 * freq, so we need to ensure AHB freq is 132MHz in such
+		 * scenario.
+		 *
+		 * To i.MX6UL, when power up, default ARM core and
+		 * AHB rate is 396M and 132M.
+		 */
+		if (mxc_get_clock(MXC_ARM_CLK) == 396000000)
+			set_ahb_rate(132000000);
+	}
+
+	if (IS_ENABLED(CONFIG_MX6UL) && is_soc_rev(CHIP_REV_1_0) == 0) {
+		/*
+		 * According to the design team's requirement on i.MX6UL,
+		 * the PMIC_STBY_REQ PAD should be configured as open
+		 * drain 100K (0x0000b8a0).
+		 * Only exists on TO1.0
+		 */
+		writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c);
+	}
 
-		/* Set perclk to source from OSC 24MHz */
+	/* Set perclk to source from OSC 24MHz */
 #if defined(CONFIG_MX6SL)
 	set_preclk_from_osc();
 #endif
diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig
index 97d6238..ecfa4a2 100644
--- a/arch/arm/cpu/armv7/mx7/Kconfig
+++ b/arch/arm/cpu/armv7/mx7/Kconfig
@@ -15,6 +15,13 @@ choice
 
 config TARGET_MX7DSABRESD
 	bool "mx7dsabresd"
+	select MX7D
+	select DM
+	select DM_THERMAL
+
+config TARGET_WARP7
+	bool "warp7"
+	select MX7D
 	select DM
 	select DM_THERMAL
 
@@ -24,5 +31,6 @@ config SYS_SOC
 	default "mx7"
 
 source "board/freescale/mx7dsabresd/Kconfig"
+source "board/warp7/Kconfig"
 
 endif
diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
index ba6cfb9..073bbc6 100644
--- a/arch/arm/cpu/armv7/mx7/soc.c
+++ b/arch/arm/cpu/armv7/mx7/soc.c
@@ -165,6 +165,21 @@ u32 get_cpu_temp_grade(int *minc, int *maxc)
 	return val;
 }
 
+static bool is_mx7d(void)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	int val;
+
+	val = readl(&fuse->tester4);
+	if (val & 1)
+		return false;
+	else
+		return true;
+}
+
 u32 get_cpu_rev(void)
 {
 	struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
@@ -172,6 +187,9 @@ u32 get_cpu_rev(void)
 	u32 reg = readl(&ccm_anatop->digprog);
 	u32 type = (reg >> 16) & 0xff;
 
+	if (!is_mx7d())
+		type = MXC_CPU_MX7S;
+
 	reg &= 0xff;
 	return (type << 12) | reg;
 }