ARM: OMAP: Cleanup boot parameters usage

The boot parameters are read from individual variables
assigned for each of them. This been corrected and now
they are stored as a part of the global data 'gd'
structure. So read them from 'gd' instead.

Signed-off-by: Sricharan R <r.sricharan@ti.com>
[trini: Add igep0033 hunk]
Signed-off-by: Tom Rini <trini@ti.com>

3 files changed, 23 insertions, 66 deletions

diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S
index 0d45528..0a15aa4 100644
--- a/arch/arm/cpu/armv7/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/lowlevel_init.S
@@ -37,7 +37,13 @@ ENTRY(lowlevel_init)
 	 */
 	ldr	sp, =CONFIG_SYS_INIT_SP_ADDR
 	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-
+#ifdef CONFIG_SPL_BUILD
+	ldr	r8, =gdata
+#else
+	sub	sp, #GD_SIZE
+	bic	sp, sp, #7
+	mov	r8, sp
+#endif
 	/*
 	 * Save the old lr(passed in ip) and the current lr to stack
 	 */
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 24cbe2d..bff7e9c 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -23,31 +23,17 @@
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sys_proto.h>
 
-/*
- * This is used to verify if the configuration header
- * was executed by rom code prior to control of transfer
- * to the bootloader. SPL is responsible for saving and
- * passing the boot_params pointer to the u-boot.
- */
-struct omap_boot_parameters boot_params __attribute__ ((section(".data")));
+DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_SPL_BUILD
-/*
- * We use static variables because global data is not ready yet.
- * Initialized data is available in SPL right from the beginning.
- * We would not typically need to save these parameters in regular
- * U-Boot. This is needed only in SPL at the moment.
- */
-u32 omap_bootmode = MMCSD_MODE_FAT;
-
 u32 spl_boot_device(void)
 {
-	return (u32) (boot_params.omap_bootdevice);
+	return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
 }
 
 u32 spl_boot_mode(void)
 {
-	return omap_bootmode;
+	return gd->arch.omap_boot_params.omap_bootmode;
 }
 
 void spl_board_init(void)
@@ -73,4 +59,15 @@ int board_mmc_init(bd_t *bis)
 	}
 	return 0;
 }
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+	typedef void __noreturn (*image_entry_noargs_t)(u32 *);
+	image_entry_noargs_t image_entry =
+			(image_entry_noargs_t) spl_image->entry_point;
+
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
+	/* Pass the saved boot_params from rom code */
+	image_entry((u32 *)&gd->arch.omap_boot_params);
+}
 #endif
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 90b3c8a..c489536 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -28,59 +28,13 @@
 
 #include <config.h>
 #include <asm/arch/omap.h>
+#include <asm/omap_common.h>
 #include <asm/arch/spl.h>
 #include <linux/linkage.h>
 
 ENTRY(save_boot_params)
-	/*
-	 * See if the rom code passed pointer is valid:
-	 * It is not valid if it is not in non-secure SRAM
-	 * This may happen if you are booting with the help of
-	 * debugger
-	 */
-	ldr     r2, =NON_SECURE_SRAM_START
-	cmp	r2, r0
-	bgt	1f
-	ldr	r2, =NON_SECURE_SRAM_END
-	cmp	r2, r0
-	blt	1f
-
-	/*
-	 * store the boot params passed from rom code or saved
-	 * and passed by SPL
-	 */
-	cmp	r0, #0
-	beq	1f
-	ldr	r1, =boot_params
+	ldr	r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
 	str	r0, [r1]
-#ifdef CONFIG_SPL_BUILD
-	/* Store the boot device in spl_boot_device */
-	ldrb	r2, [r0, #BOOT_DEVICE_OFFSET]	@ r1 <- value of boot device
-	and	r2, #BOOT_DEVICE_MASK
-	ldr	r3, =boot_params
-	strb	r2, [r3, #BOOT_DEVICE_OFFSET]	@ spl_boot_device <- r1
-
-	/*
-	 * boot mode is only valid for device that can be raw or FAT booted.
-	 * in other cases it may be fatal to look.  While platforms differ
-	 * in the values used for each MMC slot, they are contiguous.
-	 */
-	cmp	r2, #MMC_BOOT_DEVICES_START
-	blt	2f
-	cmp	r2, #MMC_BOOT_DEVICES_END
-	bgt	2f
-	/* Store the boot mode (raw/FAT) in omap_bootmode */
-	ldr	r2, [r0, #DEV_DESC_PTR_OFFSET]	@ get the device descriptor ptr
-	ldr	r2, [r2, #DEV_DATA_PTR_OFFSET]	@ get the pDeviceData ptr
-	ldr	r2, [r2, #BOOT_MODE_OFFSET]	@ get the boot mode
-	ldr	r3, =omap_bootmode
-	str	r2, [r3]
-#endif
-2:
-	ldrb	r2, [r0, #CH_FLAGS_OFFSET]
-	ldr	r3, =boot_params
-	strb	r2, [r3, #CH_FLAGS_OFFSET]
-1:
 	bx	lr
 ENDPROC(save_boot_params)