diff options
author | SRICHARAN R <r.sricharan@ti.com> | 2013-02-04 04:22:02 +0000 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-03-11 11:06:10 -0400 |
commit | 3fcdd4a5f8ba0e0fac4b2afdb5e90efac9f7f301 (patch) | |
tree | eba59f79109e214726acd882ae64083641700d82 /arch/arm/cpu | |
parent | ee9447bfe37a646a8dce182e6f625f27c10512a0 (diff) | |
download | u-boot-imx-3fcdd4a5f8ba0e0fac4b2afdb5e90efac9f7f301.zip u-boot-imx-3fcdd4a5f8ba0e0fac4b2afdb5e90efac9f7f301.tar.gz u-boot-imx-3fcdd4a5f8ba0e0fac4b2afdb5e90efac9f7f301.tar.bz2 |
ARM: OMAP4+: Clean up the pmic code
The pmic code is duplicated for OMAP 4 and 5.
Instead move the data to Soc specific place and
share the code.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r-- | arch/arm/cpu/armv7/omap-common/clocks-common.c | 83 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap4/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap4/clocks.c | 123 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap4/hw_data.c | 70 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap5/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap5/clocks.c | 98 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap5/hw_data.c | 43 |
7 files changed, 170 insertions, 249 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 2becc4a..88e5336 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -443,44 +443,45 @@ static void setup_non_essential_dplls(void) } #endif -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv) +u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic) { - u32 step; - int ret = 0; - - /* See if we can first get the GPIO if needed */ - if (gpio >= 0) - ret = gpio_request(gpio, "TPS62361_VSEL0_GPIO"); - if (ret < 0) { - printf("%s: gpio %d request failed %d\n", __func__, gpio, ret); - gpio = -1; - } - - /* Pull the GPIO low to select SET0 register, while we program SET1 */ - if (gpio >= 0) - gpio_direction_output(gpio, 0); + u32 offset_code; - step = volt_mv - TPS62361_BASE_VOLT_MV; - step /= 10; + volt_offset -= pmic->base_offset; - debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step); - if (omap_vc_bypass_send_value(TPS62361_I2C_SLAVE_ADDR, reg, step)) - puts("Scaling voltage failed for vdd_mpu from TPS\n"); + offset_code = (volt_offset + pmic->step - 1) / pmic->step; - /* Pull the GPIO high to select SET1 register */ - if (gpio >= 0) - gpio_direction_output(gpio, 1); + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + return offset_code + pmic->start_code; } -void do_scale_vcore(u32 vcore_reg, u32 volt_mv) +void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) { u32 offset_code; u32 offset = volt_mv; + int ret = 0; + + /* See if we can first get the GPIO if needed */ + if (pmic->gpio_en) + ret = gpio_request(pmic->gpio, "PMIC_GPIO"); + + if (ret < 0) { + printf("%s: gpio %d request failed %d\n", __func__, + pmic->gpio, ret); + return; + } + + /* Pull the GPIO low to select SET0 register, while we program SET1 */ + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 0); /* convert to uV for better accuracy in the calculations */ offset *= 1000; - offset_code = get_offset_code(offset); + offset_code = get_offset_code(offset, pmic); debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, offset_code); @@ -488,6 +489,36 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv) if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR, vcore_reg, offset_code)) printf("Scaling voltage failed for 0x%x\n", vcore_reg); + + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 1); +} + +/* + * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva + * We set the maximum voltages allowed here because Smart-Reflex is not + * enabled in bootloader. Voltage initialization in the kernel will set + * these to the nominal values after enabling Smart-Reflex + */ +void scale_vcores(struct vcores_data const *vcores) +{ + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + + do_scale_vcore(vcores->core.addr, vcores->core.value, + vcores->core.pmic); + + do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, + vcores->mpu.pmic); + + do_scale_vcore(vcores->mm.addr, vcores->mm.value, + vcores->mm.pmic); + + if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { + /* Configure LDO SRAM "magic" bits */ + writel(2, (*prcm)->prm_sldo_core_setup); + writel(2, (*prcm)->prm_sldo_mpu_setup); + writel(2, (*prcm)->prm_sldo_mm_setup); + } } static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) @@ -656,7 +687,7 @@ void prcm_init(void) case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: enable_basic_clocks(); - scale_vcores(); + scale_vcores(*omap_vcores); setup_dplls(); #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL setup_non_essential_dplls(); diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile index 0365148..40808d1 100644 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -27,7 +27,6 @@ LIB = $(obj)lib$(SOC).o COBJS += sdram_elpida.o COBJS += hwinit.o -COBJS += clocks.o COBJS += emif.o COBJS += prcm-regs.o COBJS += hw_data.o diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c deleted file mode 100644 index 4772743..0000000 --- a/arch/arm/cpu/armv7/omap4/clocks.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * - * Clock initialization for OMAP4 - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * - * Based on previous work by: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Rajendra Nayak <rnayak@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/omap_common.h> -#include <asm/gpio.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/utils.h> -#include <asm/omap_gpio.h> - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif /* !CONFIG_SPL_BUILD */ - -/* - * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva - * We set the maximum voltages allowed here because Smart-Reflex is not - * enabled in bootloader. Voltage initialization in the kernel will set - * these to the nominal values after enabling Smart-Reflex - */ -void scale_vcores(void) -{ - u32 volt, omap_rev; - - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - - omap_rev = omap_revision(); - - /* - * Scale Voltage rails: - * 1. VDD_CORE - * 3. VDD_MPU - * 3. VDD_IVA - */ - if (omap_rev < OMAP4460_ES1_0) { - /* - * OMAP4430: - * VDD_CORE = TWL6030 VCORE3 - * VDD_MPU = TWL6030 VCORE1 - * VDD_IVA = TWL6030 VCORE2 - */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt); - - /* - * note on VDD_MPU: - * Setting a high voltage for Nitro mode as smart reflex is not - * enabled. We use the maximum possible value in the AVS range - * because the next higher voltage in the discrete range - * (code >= 0b111010) is way too high. - */ - volt = 1325; - do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); - - } else { - /* - * OMAP4460: - * VDD_CORE = TWL6030 VCORE1 - * VDD_MPU = TPS62361 - * VDD_IVA = TWL6030 VCORE2 - */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); - /* TPS62361 */ - volt = 1203; - do_scale_tps62361(TPS62361_VSEL0_GPIO, - TPS62361_REG_ADDR_SET1, volt); - /* VCORE 2 - supplies vdd_iva */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); - } -} - -u32 get_offset_code(u32 offset) -{ - u32 offset_code, step = 12660; /* 12.66 mV represented in uV */ - - if (omap_revision() == OMAP4430_ES1_0) - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV; - else - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV; - - offset_code = (offset + step - 1) / step; - - /* The code starts at 1 not 0 */ - return ++offset_code; -} diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 6ae3986..18efa6c 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -30,12 +30,15 @@ #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> #include <asm/arch/clocks.h> +#include <asm/omap_gpio.h> #include <asm/io.h> struct prcm_regs const **prcm = (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; struct dplls const **dplls_data = (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; /* * The M & N values in the following tables are created using the @@ -194,6 +197,70 @@ struct dplls omap4460_dplls = { .usb = usb_dpll_params_1920mhz }; +struct pmic_data twl6030_4430es1 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, + .step = 12660, /* 10 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, +}; + +struct pmic_data twl6030 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, + .step = 12660, /* 10 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, +}; + +struct pmic_data tps62361 = { + .base_offset = TPS62361_BASE_VOLT_MV, + .step = 10000, /* 10 mV represented in uV */ + .start_code = 0, + .gpio = TPS62361_VSEL0_GPIO, + .gpio_en = 1 +}; + +struct vcores_data omap4430_volts_es1 = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030_4430es1, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030_4430es1, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030_4430es1, +}; + +struct vcores_data omap4430_volts = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030, +}; + +struct vcores_data omap4460_volts = { + .mpu.value = 1203, + .mpu.addr = TPS62361_REG_ADDR_SET1, + .mpu.pmic = &tps62361, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE1, + .core.pmic = &tps62361, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &tps62361, +}; + /* * Enable essential clock domains, modules and * do some additional special settings needed @@ -382,6 +449,7 @@ void hw_data_init(void) case OMAP4430_ES1_0: *dplls_data = &omap4430_dplls_es1; + *omap_vcores = &omap4430_volts_es1; break; case OMAP4430_ES2_0: @@ -389,11 +457,13 @@ void hw_data_init(void) case OMAP4430_ES2_2: case OMAP4430_ES2_3: *dplls_data = &omap4430_dplls; + *omap_vcores = &omap4430_volts; break; case OMAP4460_ES1_0: case OMAP4460_ES1_1: *dplls_data = &omap4460_dplls; + *omap_vcores = &omap4460_volts; break; default: diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index 81625f6..ce00e2c 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS += hwinit.o -COBJS += clocks.o COBJS += emif.o COBJS += sdram.o COBJS += prcm-regs.o diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c deleted file mode 100644 index da5b3ac..0000000 --- a/arch/arm/cpu/armv7/omap5/clocks.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * - * Clock initialization for OMAP5 - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * Sricharan R <r.sricharan@ti.com> - * - * Based on previous work by: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Rajendra Nayak <rnayak@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/omap_common.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/utils.h> -#include <asm/omap_gpio.h> -#include <asm/emif.h> - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif - -/* - * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva - * We set the maximum voltages allowed here because Smart-Reflex is not - * enabled in bootloader. Voltage initialization in the kernel will set - * these to the nominal values after enabling Smart-Reflex - */ -void scale_vcores(void) -{ - u32 volt_core, volt_mpu, volt_mm; - - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - - /* Palmas settings */ - if (omap_revision() != OMAP5432_ES1_0) { - volt_core = VDD_CORE; - volt_mpu = VDD_MPU; - volt_mm = VDD_MM; - } else { - volt_core = VDD_CORE_5432; - volt_mpu = VDD_MPU_5432; - volt_mm = VDD_MM_5432; - } - - do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt_core); - do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt_mpu); - do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt_mm); - - if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { - /* Configure LDO SRAM "magic" bits */ - writel(2, (*prcm)->prm_sldo_core_setup); - writel(2, (*prcm)->prm_sldo_mpu_setup); - writel(2, (*prcm)->prm_sldo_mm_setup); - } -} - -u32 get_offset_code(u32 volt_offset) -{ - u32 offset_code, step = 10000; /* 10 mV represented in uV */ - - volt_offset -= PALMAS_SMPS_BASE_VOLT_UV; - - offset_code = (volt_offset + step - 1) / step; - - /* - * Offset codes 1-6 all give the base voltage in Palmas - * Offset code 0 switches OFF the SMPS - */ - return offset_code + 6; -} diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index df375f9..13e618d 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -30,12 +30,15 @@ #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> #include <asm/arch/clocks.h> +#include <asm/omap_gpio.h> #include <asm/io.h> struct prcm_regs const **prcm = (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; struct dplls const **dplls_data = (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ @@ -179,6 +182,44 @@ struct dplls omap5_dplls_es1 = { .usb = usb_dpll_params_1920mhz }; +struct pmic_data palmas = { + .base_offset = PALMAS_SMPS_BASE_VOLT_UV, + .step = 10000, /* 10 mV represented in uV */ + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + .start_code = 6, +}; + +struct vcores_data omap5430_volts = { + .mpu.value = VDD_MPU, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +struct vcores_data omap5432_volts = { + .mpu.value = VDD_MPU_5432, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE_5432, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM_5432, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + /* * Enable essential clock domains, modules and * do some additional special settings needed @@ -380,11 +421,13 @@ void hw_data_init(void) case OMAP5430_ES1_0: *prcm = &omap5_es1_prcm; *dplls_data = &omap5_dplls_es1; + *omap_vcores = &omap5430_volts; break; case OMAP5432_ES1_0: *prcm = &omap5_es1_prcm; *dplls_data = &omap5_dplls_es1; + *omap_vcores = &omap5432_volts; break; default: |