diff options
author | Naumann Andreas <ANaumann@ultratronik.de> | 2013-07-09 09:43:17 +0200 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-08-15 09:09:29 -0400 |
commit | a704a6d615179a25f556c99d31cbc4ee366ffb54 (patch) | |
tree | f3711d3ae6ca2da11162de7b10b93c8efec43602 /arch/arm/cpu | |
parent | 802b3c7c1826018530acc8a7b8fe83f11614c937 (diff) | |
download | u-boot-imx-a704a6d615179a25f556c99d31cbc4ee366ffb54.zip u-boot-imx-a704a6d615179a25f556c99d31cbc4ee366ffb54.tar.gz u-boot-imx-a704a6d615179a25f556c99d31cbc4ee366ffb54.tar.bz2 |
ARM: omap3: Implement dpll5 (HSUSB clk) workaround for OMAP36xx/AM/DM37xx according to errata sprz318e.
In chapter 'Advisory 2.1 USB Host Clock Drift Causes USB Spec Non-compliance in Certain Configurations' of the TI Errata it is recommended to use certain div/mult values for the DPLL5 clock setup.
So far u-boot used the old 34xx values, so I added the errata recommended values specificly for 36xx init only.
Also, the FSEL registers exist no longer, so removed them from init.
Tested this on a AM3703 board with 19.2MHz oscillator, which previously couldnt lock the dpll5 (kernel complained). As a consequence the EHCI USB port wasnt usable in U-Boot and kernel. With this patch, kernel panics disappear and USB working fine in u-boot and kernel.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
[trini: Add extern to <asm/arch-omap3/clock.h>
Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r-- | arch/arm/cpu/armv7/omap3/clock.c | 20 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap3/lowlevel_init.S | 18 |
2 files changed, 37 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index 3acbc9c..e903ed9 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -478,6 +478,24 @@ static void dpll4_init_36xx(u32 sil_index, u32 clk_index) wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); } +static void dpll5_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_36x_per2_dpll_param(); + + /* Moving it to the right sysclk base */ + ptr = ptr + clk_index; + + /* PER2 DPLL (DPLL5) */ + sr32(&prcm_base->clken2_pll, 0, 3, PLL_STOP); + wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY); + sr32(&prcm_base->clksel5_pll, 0, 5, ptr->m2); /* set M2 (usbtll_fck) */ + sr32(&prcm_base->clksel4_pll, 8, 11, ptr->m); /* set m (11-bit multiplier) */ + sr32(&prcm_base->clksel4_pll, 0, 7, ptr->n); /* set n (7-bit divider)*/ + sr32(&prcm_base->clken2_pll, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY); +} + static void mpu_init_36xx(u32 sil_index, u32 clk_index) { struct prcm *prcm_base = (struct prcm *)PRCM_BASE; @@ -582,7 +600,7 @@ void prcm_init(void) dpll3_init_36xx(0, clk_index); dpll4_init_36xx(0, clk_index); - dpll5_init_34xx(0, clk_index); + dpll5_init_36xx(0, clk_index); iva_init_36xx(0, clk_index); mpu_init_36xx(0, clk_index); diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index bdf74ea..98c3c03 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -464,6 +464,19 @@ per_36x_dpll_param: .word 26000, 432, 12, 9, 16, 9, 4, 3, 1 .word 38400, 360, 15, 9, 16, 5, 4, 3, 1 +per2_36x_dpll_param: +/* 12MHz */ +.word PER2_36XX_M_12, PER2_36XX_N_12, 0, PER2_36XX_M2_12 +/* 13MHz */ +.word PER2_36XX_M_13, PER2_36XX_N_13, 0, PER2_36XX_M2_13 +/* 19.2MHz */ +.word PER2_36XX_M_19P2, PER2_36XX_N_19P2, 0, PER2_36XX_M2_19P2 +/* 26MHz */ +.word PER2_36XX_M_26, PER2_36XX_N_26, 0, PER2_36XX_M2_26 +/* 38.4MHz */ +.word PER2_36XX_M_38P4, PER2_36XX_N_38P4, 0, PER2_36XX_M2_38P4 + + ENTRY(get_36x_mpu_dpll_param) adr r0, mpu_36x_dpll_param mov pc, lr @@ -483,3 +496,8 @@ ENTRY(get_36x_per_dpll_param) adr r0, per_36x_dpll_param mov pc, lr ENDPROC(get_36x_per_dpll_param) + +ENTRY(get_36x_per2_dpll_param) + adr r0, per2_36x_dpll_param + mov pc, lr +ENDPROC(get_36x_per2_dpll_param) |