OMAP5: palmas: Configure nominal opp vdd values

The nominal opp vdd values as recommended for
ES1.0 silicon is set for mpu, core, mm domains using palmas.

Also used the right sequence to enable the vcores as per
a previous patch from Nishant Menon, which can be dropped now.
	http://lists.denx.de/pipermail/u-boot/2012-March/119151.html

Signed-off-by: R Sricharan <r.sricharan@ti.com>

3 files changed, 40 insertions, 18 deletions

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index e96a430..10d286a 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -397,23 +397,16 @@ void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv)
 void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
 {
 	u32 offset_code;
-	u32 step = 12660; /* 12.66 mV represented in uV */
 	u32 offset = volt_mv;
 
 	/* convert to uV for better accuracy in the calculations */
 	offset *= 1000;
 
-	if (omap_revision() == OMAP4430_ES1_0)
-		offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV;
-	else
-		offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV;
-
-	offset_code = (offset + step - 1) / step;
-	/* The code starts at 1 not 0 */
-	offset_code++;
+	offset_code = get_offset_code(offset);
 
 	debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
 		offset_code);
+
 	if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR,
 				vcore_reg, offset_code))
 		printf("Scaling voltage failed for 0x%x\n", vcore_reg);
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
index b6b3f7e..dd694c4 100644
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -326,6 +326,21 @@ void scale_vcores(void)
 	}
 }
 
+u32 get_offset_code(u32 offset)
+{
+	u32 offset_code, step = 12660; /* 12.66 mV represented in uV */
+
+	if (omap_revision() == OMAP4430_ES1_0)
+		offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV;
+	else
+		offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV;
+
+	offset_code = (offset + step - 1) / step;
+
+	/* The code starts at 1 not 0 */
+	return ++offset_code;
+}
+
 /*
  * Enable essential clock domains, modules and
  * do some additional special settings needed
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
index 722916e..1a59f26 100644
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -264,17 +264,31 @@ void scale_vcores(void)
 
 	omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
 
-	/* Enable 1.22V from TPS for vdd_mpu */
-	volt = 1220;
-	do_scale_tps62361(-1, TPS62361_REG_ADDR_SET1, volt);
+	/* Palmas settings */
+	volt = VDD_CORE;
+	do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt);
 
-	/* VCORE 1 - for vdd_core */
-	volt = 1000;
-	do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+	volt = VDD_MPU;
+	do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt);
 
-	/* VCORE 2 - for vdd_MM */
-	volt = 1125;
-	do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
+	volt = VDD_MM;
+	do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt);
+
+}
+
+u32 get_offset_code(u32 volt_offset)
+{
+	u32 offset_code, step = 10000; /* 10 mV represented in uV */
+
+	volt_offset -= PALMAS_SMPS_BASE_VOLT_UV;
+
+	offset_code = (volt_offset + step - 1) / step;
+
+	/*
+	 * Offset codes 1-6 all give the base voltage in Palmas
+	 * Offset code 0 switches OFF the SMPS
+	 */
+	return offset_code + 6;
 }
 
 /*