sunxi: add sun7i cpu, board and start of day support

This patch adds generic board, start of day and basic build system support for
the Allwinner A20 (sun7i) processor. This code will not been compiled until the
build is hooked up in a later patch. It has been split out to keep the patches
manageable.

Signed-off-by: Adam Sampson <ats@offog.org>
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Signed-off-by: Luke Leighton <lkcl@lkcl.net>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Patrick Wood <patrickhwood@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wills Wang <wills.wang.open@gmail.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>

6 files changed, 197 insertions, 1 deletions

diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ab869b1..232118d 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -12,7 +12,7 @@ obj-y	+= cache_v7.o
 obj-y	+= cpu.o
 obj-y	+= syslib.o
 
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),)
 ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
 obj-y	+= lowlevel_init.o
 endif
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index d81d26c..a64bfa1 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -8,7 +8,18 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 obj-y	+= timer.o
+obj-y	+= board.o
 obj-y	+= clock.o
 obj-y	+= pinmux.o
 obj-$(CONFIG_SUN7I)	+= clock_sun4i.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y	+= cpu_info.o
+endif
+
+ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SUN7I)	+= dram.o
+ifdef CONFIG_SPL_FEL
+obj-y	+= start.o
+endif
+endif
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
new file mode 100644
index 0000000..b5c0cb7
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some init for sunxi platform.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <serial.h>
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#endif
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/timer.h>
+
+#ifdef CONFIG_SPL_BUILD
+/* Pointer to the global data structure for SPL */
+DECLARE_GLOBAL_DATA_PTR;
+
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ * Unfortunately we can't check how SPL was loaded so assume
+ * it's always the first SD/MMC controller
+ */
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_MMC1;
+}
+
+/* No confirmation data available in SPL yet. Hardcode bootmode */
+u32 spl_boot_mode(void)
+{
+	return MMCSD_MODE_RAW;
+}
+#endif
+
+int gpio_init(void)
+{
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
+	sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
+
+/* do some early init */
+void s_init(void)
+{
+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
+	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
+	asm volatile(
+		"mrc p15, 0, r0, c1, c0, 1\n"
+		"orr r0, r0, #1 << 6\n"
+		"mcr p15, 0, r0, c1, c0, 1\n");
+#endif
+
+	clock_init();
+	timer_init();
+	gpio_init();
+
+#ifdef CONFIG_SPL_BUILD
+	gd = &gdata;
+	preloader_console_init();
+
+	sunxi_board_init();
+#endif
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
new file mode 100644
index 0000000..b4c3d5c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -0,0 +1,19 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+	puts("CPU:   Allwinner A20 (SUN7I)\n");
+	return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/sunxi/start.c b/arch/arm/cpu/armv7/sunxi/start.c
new file mode 100644
index 0000000..6b392fa
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/start.c
@@ -0,0 +1 @@
+/* Intentionally empty. Only needed to get FEL SPL link line right */
diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
new file mode 100644
index 0000000..364e35c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2013
+ * Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(s_init)
+SECTIONS
+{
+	. = 0x00002000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		*(.text.s_init)
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+	. = .;
+
+	. = ALIGN(4);
+	.rel.dyn : {
+		__rel_dyn_start = .;
+		*(.rel*)
+		__rel_dyn_end = .;
+	}
+
+	.dynsym : {
+		__dynsym_start = .;
+		*(.dynsym)
+	}
+
+	. = ALIGN(4);
+	.note.gnu.build-id :
+	{
+		*(.note.gnu.build-id)
+	}
+	_end = .;
+
+	. = ALIGN(4096);
+	.mmutable : {
+		*(.mmutable)
+	}
+
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+		__bss_base = .;
+	}
+
+	.bss __bss_base (OVERLAY) : {
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_limit = .;
+	}
+
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
+	}
+
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.note*) }
+}