omap: add MMC and FAT support to SPL

- Add MMC raw and FAT mode boot support for OMAP
- Provide a means by which parameters passed by ROM-code
  can be saved in u-boot.
- Save boot mode related information passed by OMAP4 ROM-code
  and use it to determine where to load the u-boot from
- Assumes that the image has a mkimage header. Gets the
  payload size and load address from this header. If the
  header is not detected assume u-boot.bin as payload

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

2 files changed, 52 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 54dd509..2e5739a 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -39,6 +39,27 @@ DECLARE_GLOBAL_DATA_PTR;
 
 u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV;
 
+#ifdef CONFIG_SPL_BUILD
+/*
+ * We use static variables because global data is not ready yet.
+ * Initialized data is available in SPL right from the beginning.
+ * We would not typically need to save these parameters in regular
+ * U-Boot. This is needed only in SPL at the moment.
+ */
+u32 omap4_boot_device = BOOT_DEVICE_MMC1;
+u32 omap4_boot_mode = MMCSD_MODE_FAT;
+
+u32 omap_boot_device(void)
+{
+	return omap4_boot_device;
+}
+
+u32 omap_boot_mode(void)
+{
+	return omap4_boot_mode;
+}
+#endif
+
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
 {
 	int i;
diff --git a/arch/arm/cpu/armv7/omap4/lowlevel_init.S b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
index 6abfbba..91525ec 100644
--- a/arch/arm/cpu/armv7/omap4/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
@@ -27,6 +27,37 @@
  */
 
 #include <asm/arch/omap4.h>
+#ifdef CONFIG_SPL_BUILD
+.global save_boot_params
+save_boot_params:
+	/*
+	 * See if the rom code passed pointer is valid:
+	 * It is not valid if it is not in non-secure SRAM
+	 * This may happen if you are booting with the help of
+	 * debugger
+	 */
+	ldr     r2, =NON_SECURE_SRAM_START
+	cmp	r2, r0
+	bgt	1f
+	ldr	r2, =NON_SECURE_SRAM_END
+	cmp	r2, r0
+	blt	1f
+
+	/* Store the boot device in omap4_boot_device */
+	ldr     r2, [r0, #BOOT_DEVICE_OFFSET]	@ r1 <- value of boot device
+	and	r2, #BOOT_DEVICE_MASK
+	ldr	r3, =omap4_boot_device
+	str     r2, [r3]			@ omap4_boot_device <- r1
+
+	/* Store the boot mode (raw/FAT) in omap4_boot_mode */
+	ldr	r2, [r0, #DEV_DESC_PTR_OFFSET]	@ get the device descriptor ptr
+	ldr	r2, [r2, #DEV_DATA_PTR_OFFSET]	@ get the pDeviceData ptr
+	ldr	r2, [r2, #BOOT_MODE_OFFSET]	@ get the boot mode
+	ldr	r3, =omap4_boot_mode
+	str	r2, [r3]
+1:
+	bx	lr
+#endif
 
 .globl lowlevel_init
 lowlevel_init: