ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7

The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9

Cortex A8 and A9 both belong to the armv7 architecture, hence the name change.

The two architectures are similar enough that substantial code can be shared.

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

1 files changed, 191 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c
new file mode 100644
index 0000000..bd914b0
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap3/mem.c
@@ -0,0 +1,191 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *     Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * Initial Code from:
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <command.h>
+
+/*
+ * Only One NAND allowed on board at a time.
+ * The GPMC CS Base for the same
+ */
+unsigned int boot_flash_base;
+unsigned int boot_flash_off;
+unsigned int boot_flash_sec;
+unsigned int boot_flash_type;
+volatile unsigned int boot_flash_env_addr;
+
+struct gpmc *gpmc_cfg;
+
+#if defined(CONFIG_CMD_NAND)
+static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
+	M_NAND_GPMC_CONFIG1,
+	M_NAND_GPMC_CONFIG2,
+	M_NAND_GPMC_CONFIG3,
+	M_NAND_GPMC_CONFIG4,
+	M_NAND_GPMC_CONFIG5,
+	M_NAND_GPMC_CONFIG6, 0
+};
+
+#if defined(CONFIG_ENV_IS_IN_NAND)
+#define GPMC_CS 0
+#else
+#define GPMC_CS 1
+#endif
+
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+static const u32 gpmc_onenand[GPMC_MAX_REG] = {
+	ONENAND_GPMC_CONFIG1,
+	ONENAND_GPMC_CONFIG2,
+	ONENAND_GPMC_CONFIG3,
+	ONENAND_GPMC_CONFIG4,
+	ONENAND_GPMC_CONFIG5,
+	ONENAND_GPMC_CONFIG6, 0
+};
+
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+#define GPMC_CS 0
+#else
+#define GPMC_CS 1
+#endif
+
+#endif
+
+/********************************************************
+ *  mem_ok() - test used to see if timings are correct
+ *             for a part. Helps in guessing which part
+ *             we are currently using.
+ *******************************************************/
+u32 mem_ok(u32 cs)
+{
+	u32 val1, val2, addr;
+	u32 pattern = 0x12345678;
+
+	addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
+
+	writel(0x0, addr + 0x400);	/* clear pos A */
+	writel(pattern, addr);		/* pattern to pos B */
+	writel(0x0, addr + 4);		/* remove pattern off the bus */
+	val1 = readl(addr + 0x400);	/* get pos A value */
+	val2 = readl(addr);		/* get val2 */
+
+	if ((val1 != 0) || (val2 != pattern))	/* see if pos A val changed */
+		return 0;
+	else
+		return 1;
+}
+
+void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
+			u32 size)
+{
+	writel(0, &cs->config7);
+	sdelay(1000);
+	/* Delay for settling */
+	writel(gpmc_config[0], &cs->config1);
+	writel(gpmc_config[1], &cs->config2);
+	writel(gpmc_config[2], &cs->config3);
+	writel(gpmc_config[3], &cs->config4);
+	writel(gpmc_config[4], &cs->config5);
+	writel(gpmc_config[5], &cs->config6);
+	/* Enable the config */
+	writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
+		(1 << 6)), &cs->config7);
+	sdelay(2000);
+}
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+	/* putting a blanket check on GPMC based on ZeBu for now */
+	gpmc_cfg = (struct gpmc *)GPMC_BASE;
+#if defined(CONFIG_CMD_NAND) || defined(CONFIG_CMD_ONENAND)
+	const u32 *gpmc_config = NULL;
+	u32 base = 0;
+	u32 size = 0;
+#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND)
+	u32 f_off = CONFIG_SYS_MONITOR_LEN;
+	u32 f_sec = 0;
+#endif
+#endif
+	u32 config = 0;
+
+	/* global settings */
+	writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */
+	writel(0, &gpmc_cfg->timeout_control);/* timeout disable */
+
+	config = readl(&gpmc_cfg->config);
+	config &= (~0xf00);
+	writel(config, &gpmc_cfg->config);
+
+	/*
+	 * Disable the GPMC0 config set by ROM code
+	 * It conflicts with our MPDB (both at 0x08000000)
+	 */
+	writel(0, &gpmc_cfg->cs[0].config7);
+	sdelay(1000);
+
+#if defined(CONFIG_CMD_NAND)	/* CS 0 */
+	gpmc_config = gpmc_m_nand;
+
+	base = PISMO1_NAND_BASE;
+	size = PISMO1_NAND_SIZE;
+	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
+#if defined(CONFIG_ENV_IS_IN_NAND)
+	f_off = SMNAND_ENV_OFFSET;
+	f_sec = (128 << 10);	/* 128 KiB */
+	/* env setup */
+	boot_flash_base = base;
+	boot_flash_off = f_off;
+	boot_flash_sec = f_sec;
+	boot_flash_env_addr = f_off;
+#endif
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+	gpmc_config = gpmc_onenand;
+	base = PISMO1_ONEN_BASE;
+	size = PISMO1_ONEN_SIZE;
+	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+	f_off = ONENAND_ENV_OFFSET;
+	f_sec = (128 << 10);	/* 128 KiB */
+	/* env setup */
+	boot_flash_base = base;
+	boot_flash_off = f_off;
+	boot_flash_sec = f_sec;
+	boot_flash_env_addr = f_off;
+#endif
+#endif
+}