diff options
author | SRICHARAN R <r.sricharan@ti.com> | 2013-02-04 04:22:00 +0000 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-03-11 11:06:09 -0400 |
commit | 01b753ff7badb5b8670794de3d5dd71e1c4c9baf (patch) | |
tree | 8f65d803f009d86910345fccc4989141ec7029f4 /arch/arm/cpu/armv7/omap-common/clocks-common.c | |
parent | 9ca8bfea80f38e3b423e339499c861ddc24b830c (diff) | |
download | u-boot-imx-01b753ff7badb5b8670794de3d5dd71e1c4c9baf.zip u-boot-imx-01b753ff7badb5b8670794de3d5dd71e1c4c9baf.tar.gz u-boot-imx-01b753ff7badb5b8670794de3d5dd71e1c4c9baf.tar.bz2 |
ARM: OMAP4+: Change the PRCM structure prototype common for all Socs
The current PRCM structure prototype directly matches the hardware
register layout. So there is a need to change this for every new silicon
revision which has register space changes.
Avoiding this by making the prototye generic and populating the register
addresses seperately for all Socs.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'arch/arm/cpu/armv7/omap-common/clocks-common.c')
-rw-r--r-- | arch/arm/cpu/armv7/omap-common/clocks-common.c | 106 |
1 files changed, 53 insertions, 53 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 1f95fba..d36fccc 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -61,7 +61,7 @@ static inline u32 __get_sys_clk_index(void) ind = OMAP_SYS_CLK_IND_38_4_MHZ; else { /* SYS_CLKSEL - 1 to match the dpll param array indices */ - ind = (readl(&prcm->cm_sys_clksel) & + ind = (readl((*prcm)->cm_sys_clksel) & CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; } return ind; @@ -76,7 +76,7 @@ u32 get_sys_clk_freq(void) return sys_clk_array[index]; } -static inline void do_bypass_dpll(u32 *const base) +static inline void do_bypass_dpll(u32 const base) { struct dpll_regs *dpll_regs = (struct dpll_regs *)base; @@ -86,17 +86,17 @@ static inline void do_bypass_dpll(u32 *const base) CM_CLKMODE_DPLL_EN_SHIFT); } -static inline void wait_for_bypass(u32 *const base) +static inline void wait_for_bypass(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("Bypassing DPLL failed %p\n", base); + printf("Bypassing DPLL failed %x\n", base); } } -static inline void do_lock_dpll(u32 *const base) +static inline void do_lock_dpll(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; @@ -105,18 +105,18 @@ static inline void do_lock_dpll(u32 *const base) DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); } -static inline void wait_for_lock(u32 *const base) +static inline void wait_for_lock(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("DPLL locking failed for %p\n", base); + printf("DPLL locking failed for %x\n", base); hang(); } } -inline u32 check_for_lock(u32 *const base) +inline u32 check_for_lock(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK; @@ -124,7 +124,7 @@ inline u32 check_for_lock(u32 *const base) return lock; } -static void do_setup_dpll(u32 *const base, const struct dpll_params *params, +static void do_setup_dpll(u32 const base, const struct dpll_params *params, u8 lock, char *dpll) { u32 temp, M, N; @@ -236,24 +236,24 @@ void configure_mpu_dpll(void) */ if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) { mpu_dpll_regs = - (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu; - bypass_dpll(&prcm->cm_clkmode_dpll_mpu); - clrbits_le32(&prcm->cm_mpu_mpu_clkctrl, + (struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu); + bypass_dpll((*prcm)->cm_clkmode_dpll_mpu); + clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, + setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll, CM_CLKSEL_DCC_EN_MASK); } - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, + setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, + setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); params = get_mpu_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); debug("MPU DPLL locked\n"); } @@ -277,12 +277,12 @@ static void setup_usb_dpll(void) den = (params->n + 1) * 250 * 1000; num += den - 1; sd_div = num / den; - clrsetbits_le32(&prcm->cm_clksel_dpll_usb, + clrsetbits_le32((*prcm)->cm_clksel_dpll_usb, CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT); /* Now setup the dpll with the regular function */ - do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); } #endif @@ -301,21 +301,21 @@ static void setup_dplls(void) * using the FREQ_UPDATE method(freq_update_core()) */ if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_NO_LOCK, "core"); else - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_LOCK, "core"); /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */ temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) | (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) | (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT); - writel(temp, &prcm->cm_clksel_core); + writel(temp, (*prcm)->cm_clksel_core); debug("Core DPLL configured\n"); /* lock PER dpll */ params = get_per_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_per, + do_setup_dpll((*prcm)->cm_clkmode_dpll_per, params, DPLL_LOCK, "per"); debug("PER DPLL locked\n"); @@ -334,11 +334,11 @@ static void setup_non_essential_dplls(void) const struct dpll_params *params; /* IVA */ - clrsetbits_le32(&prcm->cm_bypclk_dpll_iva, + clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva, CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); params = get_iva_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); /* Configure ABE dpll */ params = get_abe_dpll_params(); @@ -350,23 +350,23 @@ static void setup_non_essential_dplls(void) * We need to enable some additional options to achieve * 196.608MHz from 32768 Hz */ - setbits_le32(&prcm->cm_clkmode_dpll_abe, + setbits_le32((*prcm)->cm_clkmode_dpll_abe, CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK| CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK| CM_CLKMODE_DPLL_LPMODE_EN_MASK| CM_CLKMODE_DPLL_REGM4XEN_MASK); /* Spend 4 REFCLK cycles at each stage */ - clrsetbits_le32(&prcm->cm_clkmode_dpll_abe, + clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe, CM_CLKMODE_DPLL_RAMP_RATE_MASK, 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT); #endif /* Select the right reference clk */ - clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel, + clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel, CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK, abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT); /* Lock the dpll */ - do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); } #endif @@ -417,14 +417,14 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv) printf("Scaling voltage failed for 0x%x\n", vcore_reg); } -static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode) +static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) { clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Enable clock domain - %p\n", clkctrl_reg); + debug("Enable clock domain - %x\n", clkctrl_reg); } -static inline void wait_for_clk_enable(u32 *clkctrl_addr) +static inline void wait_for_clk_enable(u32 clkctrl_addr) { u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; u32 bound = LDELAY; @@ -436,19 +436,19 @@ static inline void wait_for_clk_enable(u32 *clkctrl_addr) idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> MODULE_CLKCTRL_IDLEST_SHIFT; if (--bound == 0) { - printf("Clock enable failed for 0x%p idlest 0x%x\n", + printf("Clock enable failed for 0x%x idlest 0x%x\n", clkctrl_addr, clkctrl); return; } } } -static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode, +static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode, u32 wait_for_enable) { clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Enable clock module - %p\n", clkctrl_addr); + debug("Enable clock module - %x\n", clkctrl_addr); if (wait_for_enable) wait_for_clk_enable(clkctrl_addr); } @@ -461,10 +461,10 @@ void freq_update_core(void) core_dpll_params = get_core_dpll_params(); /* Put EMIF clock domain in sw wakeup mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, + enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK | SHADOW_FREQ_CONFIG1_DLL_RESET_MASK; @@ -476,9 +476,9 @@ void freq_update_core(void) SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) & SHADOW_FREQ_CONFIG1_M2_DIV_MASK; - writel(freq_config1, &prcm->cm_shadow_freq_config1); + writel(freq_config1, (*prcm)->cm_shadow_freq_config1); if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0, - &prcm->cm_shadow_freq_config1, LDELAY)) { + (u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) { puts("FREQ UPDATE procedure failed!!"); hang(); } @@ -490,20 +490,20 @@ void freq_update_core(void) */ if (omap_rev != OMAP5430_ES1_0) { /* Put EMIF clock domain back in hw auto mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, + enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); } } -void bypass_dpll(u32 *const base) +void bypass_dpll(u32 const base) { do_bypass_dpll(base); wait_for_bypass(base); } -void lock_dpll(u32 *const base) +void lock_dpll(u32 const base) { do_lock_dpll(base); wait_for_lock(base); @@ -512,39 +512,39 @@ void lock_dpll(u32 *const base) void setup_clocks_for_console(void) { /* Do not add any spl_debug prints in this function */ - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_SW_WKUP << CD_CLKCTRL_CLKTRCTRL_SHIFT); /* Enable all UARTs - console will be on one of them */ - clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_HW_AUTO << CD_CLKCTRL_CLKTRCTRL_SHIFT); } -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, u8 wait_for_enable) { u32 i, max = 100; |