ENGR00325255 pcie:enable pcie support on imx6sx sd

Enable pcie support in uboot on imx6sx sd boards
- enable_pcie_clock should be call before ssp_en is set,
  since that ssp_en control the phy_ref clk gate, turn on
  it after the source of the pcie clks are stable.
- add debug info
- add rx_eq of gpr12 on imx6sx
- there are random link down issue on imx6sx. It's
  pcie ep reset issue.
  solution:reset ep, then retry link can fix it.

Signed-off-by: Richard Zhu <r65037@freescale.com>

2 files changed, 36 insertions, 6 deletions

diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index abe2d81..700d190 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -733,6 +733,15 @@ static void ungate_sata_clock(void)
 	/* Enable SATA clock. */
 	setbits_le32(&imx_ccm->CCGR5, MXC_CCM_CCGR5_SATA_MASK);
 }
+#else
+static void ungate_disp_axi_clock(void)
+{
+	struct mxc_ccm_reg *const imx_ccm =
+		(struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	/* Enable display axi clock. */
+	setbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_DISP_AXI_MASK);
+}
 #endif
 
 static void ungate_pcie_clock(void)
@@ -758,6 +767,9 @@ int enable_pcie_clock(void)
 		(struct anatop_regs *)ANATOP_BASE_ADDR;
 	struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 
+	/* PCIe reference clock sourced from AXI. */
+	clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
+
 	/*
 	 * Here be dragons!
 	 *
@@ -773,22 +785,30 @@ int enable_pcie_clock(void)
 #define ANADIG_ANA_MISC1_LVDSCLK1_IBEN		(1 << 12)
 #define ANADIG_ANA_MISC1_LVDSCLK1_OBEN		(1 << 10)
 #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK	0x0000001F
+#ifndef CONFIG_MX6SX
+	/* lvds_clk1 is sourced from sata ref on imx6q/dl/solo */
 	clrsetbits_le32(&anatop_regs->ana_misc1,
 			ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
 			ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
 			ANADIG_ANA_MISC1_LVDSCLK1_OBEN | 0xb);
 
-	/* PCIe reference clock sourced from AXI. */
-	clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
-
 	/* Party time! Ungate the clock to the PCIe. */
-#ifndef CONFIG_MX6SX
 	ungate_sata_clock();
-#endif
 	ungate_pcie_clock();
 
 	return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_SATA |
-			       BM_ANADIG_PLL_ENET_ENABLE_PCIE);
+			BM_ANADIG_PLL_ENET_ENABLE_PCIE);
+#else
+	/* lvds_clk1 is sourced from pcie ref on imx6sx */
+	clrsetbits_le32(&anatop_regs->ana_misc1,
+			ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
+			ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
+			ANADIG_ANA_MISC1_LVDSCLK1_OBEN | 0xa);
+
+	ungate_disp_axi_clock();
+	ungate_pcie_clock();
+	return enable_enet_pll(BM_ANADIG_PLL_ENET_ENABLE_PCIE);
+#endif
 }
 
 #ifdef CONFIG_SECURE_BOOT
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index e4393b3..fa1d6e6 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -427,6 +427,16 @@ void vadc_power_down(void)
 	val &= ~IMX6SX_GPR5_CSI1_MUX_CTRL_MASK,
 	writel(val, &iomux->gpr[5]);
 }
+
+void pcie_power_up(void)
+{
+	set_ldo_voltage(LDO_PU, 1100);	/* Set VDDPU to 1.1V */
+}
+
+void pcie_power_off(void)
+{
+	set_ldo_voltage(LDO_PU, 0);	/* Set VDDPU to 1.1V */
+}
 #endif
 
 static void imx_set_vddpu_power_down(void)