summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/am33xx
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2012-07-31 08:55:01 -0700
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-01 14:58:13 +0200
commit65d750be590db1ad3f045f45a8fbac59c4ccb9b5 (patch)
tree288188bb57a6a7f7d2e6b08e569ee87412752ce4 /arch/arm/cpu/armv7/am33xx
parent973b663820382c9d02bc6042a5901f3f74640c17 (diff)
downloadu-boot-imx-65d750be590db1ad3f045f45a8fbac59c4ccb9b5.zip
u-boot-imx-65d750be590db1ad3f045f45a8fbac59c4ccb9b5.tar.gz
u-boot-imx-65d750be590db1ad3f045f45a8fbac59c4ccb9b5.tar.bz2
am33xx: Add support for TI AM335x StarterKit EVM
- Board requires gpio0 #7 to be set to power DDR3. - Board uses DDR3, add a way to determine which DDR type to call config_ddr with. - Both of the above require filling in the header structure early, move it into the data section. Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'arch/arm/cpu/armv7/am33xx')
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c41
1 files changed, 39 insertions, 2 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 4634a9a..a1fe104 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -29,6 +29,7 @@
#include <asm/io.h>
#include <asm/omap_common.h>
#include <asm/emif.h>
+#include <asm/gpio.h>
#include <i2c.h>
#include <miiphy.h>
#include <cpsw.h>
@@ -52,6 +53,9 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
#define MII_MODE_ENABLE 0x0
#define RGMII_MODE_ENABLE 0xA
+/* GPIO that controls power to DDR on EVM-SK */
+#define GPIO_DDR_VTT_EN 7
+
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/*
@@ -72,13 +76,18 @@ struct am335x_baseboard_id {
char mac_addr[NO_OF_MAC_ADDR][ETH_ALEN];
};
-static struct am335x_baseboard_id header;
+static struct am335x_baseboard_id __attribute__((section (".data"))) header;
static inline int board_is_bone(void)
{
return !strncmp(header.name, "A335BONE", NAME_LEN);
}
+static inline int board_is_evm_sk(void)
+{
+ return !strncmp("A335X_SK", header.name, NAME_LEN);
+}
+
/*
* Read header information from EEPROM into global structure.
*/
@@ -145,6 +154,18 @@ static void init_timer(void)
#endif
/*
+ * Determine what type of DDR we have.
+ */
+static short inline board_memory_type(void)
+{
+ /* The following boards are known to use DDR3. */
+ if (board_is_evm_sk())
+ return EMIF_REG_SDRAM_TYPE_DDR3;
+
+ return EMIF_REG_SDRAM_TYPE_DDR2;
+}
+
+/*
* early system init of muxing and clocks.
*/
void s_init(void)
@@ -185,7 +206,23 @@ void s_init(void)
preloader_console_init();
- config_ddr(EMIF_REG_SDRAM_TYPE_DDR2);
+ /* Initalize the board header */
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ if (board_is_evm_sk()) {
+ /*
+ * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
+ * This is safe enough to do on older revs.
+ */
+ enable_gpio0_7_pin_mux();
+ gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
+ gpio_direction_output(GPIO_DDR_VTT_EN, 1);
+ }
+
+ config_ddr(board_memory_type());
#endif
/* Enable MMC0 */