Drop support for CONFIG_SYS_ARM_WITHOUT_RELOC

When this define was introduced, the idea was to provide a soft
migration path for ARM boards to get adapted to the new relocation
support.  However, other recent changes led to a different
implementation (ELF relocation), where this no longer works.  By now
CONFIG_SYS_ARM_WITHOUT_RELOC does not only not help any more, but it
actually hurts because it obfuscates the actual code by sprinkling it
with lots of dead and non-working debris.

So let's make a clean cut and drop CONFIG_SYS_ARM_WITHOUT_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>

2 files changed, 0 insertions, 111 deletions

diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c
index c5c8ab7..b749282 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/dram.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c
@@ -49,20 +49,6 @@ u32 orion5x_sdram_bar(enum memory_bank bank)
 	result = winregs[bank].base;
 	return result;
 }
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-int dram_init(void)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
-		gd->bd->bi_dram[i].size = get_ram_size(
-			(volatile long *) (gd->bd->bi_dram[i].start),
-			CONFIG_MAX_RAM_BANK_SIZE);
-	}
-	return 0;
-}
-#else
 int dram_init (void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
@@ -83,4 +69,3 @@ void dram_init_banksize (void)
 			CONFIG_MAX_RAM_BANK_SIZE);
 	}
 }
-#endif
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 7397882..4f689c1 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -145,7 +145,6 @@ FIQ_STACK_START:
 	.word 0x0badc0de
 #endif
 
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
@@ -307,89 +306,6 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
 	.word __dynsym_start - _start
 
-#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-	ldr	r3, _bss_start_ofs	/* r3 <- _bss_start - _start	    */
-	add	r2, r0, r3		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
-#ifndef CONFIG_PRELOADER
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-#endif /* CONFIG_PRELOADER */
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
-
-clear_bss:
-	adr	r2, _start
-	ldr	r0, _bss_start_ofs	/* find start of bss segment        */
-	add	r0, r0, r2
-	ldr	r1, _bss_end_ofs	/* stop here                        */
-	add	r1, r1, r2
-	mov	r2, #0x00000000		/* clear                            */
-
-#ifndef CONFIG_PRELOADER
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
-
-	bl coloured_LED_init
-	bl red_LED_on
-#endif /* CONFIG_PRELOADER */
-
-	ldr	r0, _start_armboot_ofs
-	adr	r1, _start
-	add	r0, r0, r1
-	ldr	pc, r0
-
-_start_armboot_ofs:
-#ifdef CONFIG_NAND_SPL
-	.word nand_boot - _start
-#else
-	.word start_armboot - _start
-#endif /* CONFIG_NAND_SPL */
-#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
-
 /*
  *************************************************************************
  *
@@ -474,13 +390,7 @@ cpu_init_crit:
 	@ carve out a frame on current user stack
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	adr	r2, _start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-#else
 	ldr	r2, IRQ_STACK_START_IN
-#endif
 	@ get values for "aborted" pc and cpsr (into parm regs)
 	ldmia	r2, {r2 - r3}
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -512,13 +422,7 @@ cpu_init_crit:
 	.endm
 
 	.macro get_bad_stack
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-	adr	r13, _start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-#else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-#endif
 
 	str	lr, [r13]	@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr	@ get the spsr