summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/arm926ejs
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.m@jp.panasonic.com>2015-02-20 17:04:05 +0900
committerTom Rini <trini@ti.com>2015-02-21 08:23:51 -0500
commit601fbec7cf815bc2b26ba2546ac5e8501fc7edae (patch)
tree61c83cdadd3499fcbcf63feb39064ef4130afe3e /arch/arm/cpu/arm926ejs
parent09f455dca74973ef5e42311162c8dff7e83d44a2 (diff)
downloadu-boot-imx-601fbec7cf815bc2b26ba2546ac5e8501fc7edae.zip
u-boot-imx-601fbec7cf815bc2b26ba2546ac5e8501fc7edae.tar.gz
u-boot-imx-601fbec7cf815bc2b26ba2546ac5e8501fc7edae.tar.bz2
ARM: davinci: move SoC sources to mach-davinci
Move arch/arm/cpu/arm926ejs/davinci/* -> arch/arm/mach-davinci/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
Diffstat (limited to 'arch/arm/cpu/arm926ejs')
-rw-r--r--arch/arm/cpu/arm926ejs/Makefile1
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/Kconfig78
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/Makefile28
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/config.mk8
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/cpu.c223
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c139
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c313
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c181
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/dm355.c30
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/dm365.c20
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c460
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/dm644x.c81
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/dm646x.c26
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/dp83848.c128
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/et1011c.c42
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/ksz8873.c53
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S693
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/lxt972.c113
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/misc.c138
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/pinmux.c90
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/psc.c160
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/reset.c32
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/spl.c65
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/timer.c128
24 files changed, 0 insertions, 3230 deletions
diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile
index f41357a..27b4353 100644
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -15,7 +15,6 @@ endif
endif
obj-$(CONFIG_ARMADA100) += armada100/
-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
obj-$(CONFIG_KIRKWOOD) += kirkwood/
obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/
obj-$(CONFIG_MB86R0x) += mb86r0x/
diff --git a/arch/arm/cpu/arm926ejs/davinci/Kconfig b/arch/arm/cpu/arm926ejs/davinci/Kconfig
deleted file mode 100644
index 613f04d..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/Kconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-if ARCH_DAVINCI
-
-choice
- prompt "DaVinci board select"
-
-config TARGET_ENBW_CMC
- bool "EnBW CMC board"
-
-config TARGET_IPAM390
- bool "IPAM390 board"
- select SUPPORT_SPL
-
-config TARGET_DA830EVM
- bool "DA830 EVM board"
-
-config TARGET_DA850EVM
- bool "DA850 EVM board"
- select SUPPORT_SPL
-
-config TARGET_CAM_ENC_4XX
- bool "CAM ENC 4xx board"
- select SUPPORT_SPL
-
-config TARGET_HAWKBOARD
- bool "Hawkboard"
- select SUPPORT_SPL
-
-config TARGET_DAVINCI_DM355EVM
- bool "DM355 EVM board"
-
-config TARGET_DAVINCI_DM355LEOPARD
- bool "DM355 Leopard board"
-
-config TARGET_DAVINCI_DM365EVM
- bool "DM365 EVM board"
-
-config TARGET_DAVINCI_DM6467EVM
- bool "DM6467 EVM board"
-
-config TARGET_DAVINCI_DVEVM
- bool "DVEVM board"
-
-config TARGET_EA20
- bool "EA20 board"
-
-config TARGET_DAVINCI_SCHMOOGIE
- bool "Schmoogie board"
-
-config TARGET_DAVINCI_SFFSDR
- bool "SFFSDR board"
-
-config TARGET_DAVINCI_SONATA
- bool "Sonata board"
-
-config TARGET_CALIMAIN
- bool "Calimain board"
-
-endchoice
-
-config SYS_SOC
- default "davinci"
-
-source "board/enbw/enbw_cmc/Kconfig"
-source "board/ait/cam_enc_4xx/Kconfig"
-source "board/Barix/ipam390/Kconfig"
-source "board/davinci/da8xxevm/Kconfig"
-source "board/davinci/dm355evm/Kconfig"
-source "board/davinci/dm355leopard/Kconfig"
-source "board/davinci/dm365evm/Kconfig"
-source "board/davinci/dm6467evm/Kconfig"
-source "board/davinci/dvevm/Kconfig"
-source "board/davinci/ea20/Kconfig"
-source "board/davinci/schmoogie/Kconfig"
-source "board/davinci/sffsdr/Kconfig"
-source "board/davinci/sonata/Kconfig"
-source "board/omicron/calimain/Kconfig"
-
-endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
deleted file mode 100644
index 7d67191..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += cpu.o misc.o timer.o psc.o pinmux.o reset.o
-obj-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o
-obj-$(CONFIG_SOC_DM355) += dm355.o
-obj-$(CONFIG_SOC_DM365) += dm365.o
-obj-$(CONFIG_SOC_DM644X) += dm644x.o
-obj-$(CONFIG_SOC_DM646X) += dm646x.o
-obj-$(CONFIG_SOC_DA830) += da830_pinmux.o
-obj-$(CONFIG_SOC_DA850) += da850_pinmux.o
-obj-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
-obj-$(CONFIG_SOC_DM365) += dm365_lowlevel.o
-obj-$(CONFIG_SOC_DA8XX) += da850_lowlevel.o
-endif
-
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-obj-y += lowlevel_init.o
-endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/config.mk b/arch/arm/cpu/arm926ejs/davinci/config.mk
deleted file mode 100644
index 69e9d5a..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright (C) 2012, Texas Instruments, Incorporated - http://www.ti.com/
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-ifndef CONFIG_SPL_BUILD
-ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.ais
-endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c
deleted file mode 100644
index ff61147..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/cpu.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2009 David Brownell
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* offsets from PLL controller base */
-#define PLLC_PLLCTL 0x100
-#define PLLC_PLLM 0x110
-#define PLLC_PREDIV 0x114
-#define PLLC_PLLDIV1 0x118
-#define PLLC_PLLDIV2 0x11c
-#define PLLC_PLLDIV3 0x120
-#define PLLC_POSTDIV 0x128
-#define PLLC_BPDIV 0x12c
-#define PLLC_PLLDIV4 0x160
-#define PLLC_PLLDIV5 0x164
-#define PLLC_PLLDIV6 0x168
-#define PLLC_PLLDIV7 0x16c
-#define PLLC_PLLDIV8 0x170
-#define PLLC_PLLDIV9 0x174
-
-#define BIT(x) (1 << (x))
-
-/* SOC-specific pll info */
-#ifdef CONFIG_SOC_DM355
-#define ARM_PLLDIV PLLC_PLLDIV1
-#define DDR_PLLDIV PLLC_PLLDIV1
-#endif
-
-#ifdef CONFIG_SOC_DM644X
-#define ARM_PLLDIV PLLC_PLLDIV2
-#define DSP_PLLDIV PLLC_PLLDIV1
-#define DDR_PLLDIV PLLC_PLLDIV2
-#endif
-
-#ifdef CONFIG_SOC_DM646X
-#define DSP_PLLDIV PLLC_PLLDIV1
-#define ARM_PLLDIV PLLC_PLLDIV2
-#define DDR_PLLDIV PLLC_PLLDIV1
-#endif
-
-#ifdef CONFIG_SOC_DA8XX
-unsigned int sysdiv[9] = {
- PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5,
- PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9
-};
-
-int clk_get(enum davinci_clk_ids id)
-{
- int pre_div;
- int pllm;
- int post_div;
- int pll_out;
- unsigned int pll_base;
-
- pll_out = CONFIG_SYS_OSCIN_FREQ;
-
- if (id == DAVINCI_AUXCLK_CLKID)
- goto out;
-
- if ((id >> 16) == 1)
- pll_base = (unsigned int)davinci_pllc1_regs;
- else
- pll_base = (unsigned int)davinci_pllc0_regs;
-
- id &= 0xFFFF;
-
- /*
- * Lets keep this simple. Combining operations can result in
- * unexpected approximations
- */
- pre_div = (readl(pll_base + PLLC_PREDIV) &
- DAVINCI_PLLC_DIV_MASK) + 1;
- pllm = readl(pll_base + PLLC_PLLM) + 1;
-
- pll_out /= pre_div;
- pll_out *= pllm;
-
- if (id == DAVINCI_PLLM_CLKID)
- goto out;
-
- post_div = (readl(pll_base + PLLC_POSTDIV) &
- DAVINCI_PLLC_DIV_MASK) + 1;
-
- pll_out /= post_div;
-
- if (id == DAVINCI_PLLC_CLKID)
- goto out;
-
- pll_out /= (readl(pll_base + sysdiv[id - 1]) &
- DAVINCI_PLLC_DIV_MASK) + 1;
-
-out:
- return pll_out;
-}
-
-int set_cpu_clk_info(void)
-{
- gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000;
- /* DDR PHY uses an x2 input clock */
- gd->bd->bi_ddr_freq = cpu_is_da830() ? 0 :
- (clk_get(DAVINCI_DDR_CLKID) / 1000000);
- gd->bd->bi_dsp_freq = 0;
- return 0;
-}
-
-#else /* CONFIG_SOC_DA8XX */
-
-static unsigned pll_div(volatile void *pllbase, unsigned offset)
-{
- u32 div;
-
- div = REG(pllbase + offset);
- return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
-}
-
-static inline unsigned pll_prediv(volatile void *pllbase)
-{
-#ifdef CONFIG_SOC_DM355
- /* this register read seems to fail on pll0 */
- if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
- return 8;
- else
- return pll_div(pllbase, PLLC_PREDIV);
-#elif defined(CONFIG_SOC_DM365)
- return pll_div(pllbase, PLLC_PREDIV);
-#endif
- return 1;
-}
-
-static inline unsigned pll_postdiv(volatile void *pllbase)
-{
-#if defined(CONFIG_SOC_DM355) || defined(CONFIG_SOC_DM365)
- return pll_div(pllbase, PLLC_POSTDIV);
-#elif defined(CONFIG_SOC_DM6446)
- if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
- return pll_div(pllbase, PLLC_POSTDIV);
-#endif
- return 1;
-}
-
-static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
-{
- volatile void *pllbase = (volatile void *) pll_addr;
-#ifdef CONFIG_SOC_DM646X
- unsigned base = CONFIG_REFCLK_FREQ / 1000;
-#else
- unsigned base = CONFIG_SYS_HZ_CLOCK / 1000;
-#endif
-
- /* the PLL might be bypassed */
- if (readl(pllbase + PLLC_PLLCTL) & BIT(0)) {
- base /= pll_prediv(pllbase);
-#if defined(CONFIG_SOC_DM365)
- base *= 2 * (readl(pllbase + PLLC_PLLM) & 0x0ff);
-#else
- base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
-#endif
- base /= pll_postdiv(pllbase);
- }
- return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
-}
-
-#ifdef DAVINCI_DM6467EVM
-unsigned int davinci_arm_clk_get()
-{
- return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000;
-}
-#endif
-
-#if defined(CONFIG_SOC_DM365)
-unsigned int davinci_clk_get(unsigned int div)
-{
- return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, div) * 1000000;
-}
-#endif
-
-int set_cpu_clk_info(void)
-{
- unsigned int pllbase = DAVINCI_PLL_CNTRL0_BASE;
-#if defined(CONFIG_SOC_DM365)
- pllbase = DAVINCI_PLL_CNTRL1_BASE;
-#endif
- gd->bd->bi_arm_freq = pll_sysclk_mhz(pllbase, ARM_PLLDIV);
-
-#ifdef DSP_PLLDIV
- gd->bd->bi_dsp_freq =
- pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV);
-#else
- gd->bd->bi_dsp_freq = 0;
-#endif
-
- pllbase = DAVINCI_PLL_CNTRL1_BASE;
-#if defined(CONFIG_SOC_DM365)
- pllbase = DAVINCI_PLL_CNTRL0_BASE;
-#endif
- gd->bd->bi_ddr_freq = pll_sysclk_mhz(pllbase, DDR_PLLDIV) / 2;
-
- return 0;
-}
-
-#endif /* !CONFIG_SOC_DA8XX */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_DRIVER_TI_EMAC)
- davinci_emac_initialize();
-#endif
- return 0;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
deleted file mode 100644
index edaab45..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Pinmux configurations for the DA830 SoCs
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pinmux_defs.h>
-
-/* SPI0 pin muxer settings */
-const struct pinmux_config spi0_pins_base[] = {
- { pinmux(7), 1, 3 }, /* SPI0_SOMI */
- { pinmux(7), 1, 4 }, /* SPI0_SIMO */
- { pinmux(7), 1, 6 } /* SPI0_CLK */
-};
-
-const struct pinmux_config spi0_pins_scs0[] = {
- { pinmux(7), 1, 7 } /* SPI0_SCS[0] */
-};
-
-const struct pinmux_config spi0_pins_ena[] = {
- { pinmux(7), 1, 5 } /* SPI0_ENA */
-};
-
-/* NAND pin muxer settings */
-const struct pinmux_config emifa_pins_cs0[] = {
- { pinmux(18), 1, 2 } /* EMA_CS[0] */
-};
-
-const struct pinmux_config emifa_pins_cs2[] = {
- { pinmux(18), 1, 3 } /* EMA_CS[2] */
-};
-
-const struct pinmux_config emifa_pins_cs3[] = {
- { pinmux(18), 1, 4 } /* EMA_CS[3] */
-};
-
-#ifdef CONFIG_USE_NAND
-const struct pinmux_config emifa_pins[] = {
- { pinmux(13), 1, 6 }, /* EMA_D[0] */
- { pinmux(13), 1, 7 }, /* EMA_D[1] */
- { pinmux(14), 1, 0 }, /* EMA_D[2] */
- { pinmux(14), 1, 1 }, /* EMA_D[3] */
- { pinmux(14), 1, 2 }, /* EMA_D[4] */
- { pinmux(14), 1, 3 }, /* EMA_D[5] */
- { pinmux(14), 1, 4 }, /* EMA_D[6] */
- { pinmux(14), 1, 5 }, /* EMA_D[7] */
- { pinmux(14), 1, 6 }, /* EMA_D[8] */
- { pinmux(14), 1, 7 }, /* EMA_D[9] */
- { pinmux(15), 1, 0 }, /* EMA_D[10] */
- { pinmux(15), 1, 1 }, /* EMA_D[11] */
- { pinmux(15), 1, 2 }, /* EMA_D[12] */
- { pinmux(15), 1, 3 }, /* EMA_D[13] */
- { pinmux(15), 1, 4 }, /* EMA_D[14] */
- { pinmux(15), 1, 5 }, /* EMA_D[15] */
- { pinmux(15), 1, 6 }, /* EMA_A[0] */
- { pinmux(15), 1, 7 }, /* EMA_A[1] */
- { pinmux(16), 1, 0 }, /* EMA_A[2] */
- { pinmux(16), 1, 1 }, /* EMA_A[3] */
- { pinmux(16), 1, 2 }, /* EMA_A[4] */
- { pinmux(16), 1, 3 }, /* EMA_A[5] */
- { pinmux(16), 1, 4 }, /* EMA_A[6] */
- { pinmux(16), 1, 5 }, /* EMA_A[7] */
- { pinmux(16), 1, 6 }, /* EMA_A[8] */
- { pinmux(16), 1, 7 }, /* EMA_A[9] */
- { pinmux(17), 1, 0 }, /* EMA_A[10] */
- { pinmux(17), 1, 1 }, /* EMA_A[11] */
- { pinmux(17), 1, 2 }, /* EMA_A[12] */
- { pinmux(17), 1, 3 }, /* EMA_BA[1] */
- { pinmux(17), 1, 4 }, /* EMA_BA[0] */
- { pinmux(17), 1, 5 }, /* EMA_CLK */
- { pinmux(17), 1, 6 }, /* EMA_SDCKE */
- { pinmux(17), 1, 7 }, /* EMA_CAS */
- { pinmux(18), 1, 0 }, /* EMA_CAS */
- { pinmux(18), 1, 1 }, /* EMA_WE */
- { pinmux(18), 1, 5 }, /* EMA_OE */
- { pinmux(18), 1, 6 }, /* EMA_WE_DQM[1] */
- { pinmux(18), 1, 7 }, /* EMA_WE_DQM[0] */
- { pinmux(10), 1, 0 } /* Tristate */
-};
-#endif
-
-/* EMAC PHY interface pins */
-const struct pinmux_config emac_pins_rmii[] = {
- { pinmux(10), 2, 1 }, /* RMII_TXD[0] */
- { pinmux(10), 2, 2 }, /* RMII_TXD[1] */
- { pinmux(10), 2, 3 }, /* RMII_TXEN */
- { pinmux(10), 2, 4 }, /* RMII_CRS_DV */
- { pinmux(10), 2, 5 }, /* RMII_RXD[0] */
- { pinmux(10), 2, 6 }, /* RMII_RXD[1] */
- { pinmux(10), 2, 7 } /* RMII_RXER */
-};
-
-const struct pinmux_config emac_pins_mdio[] = {
- { pinmux(11), 2, 0 }, /* MDIO_CLK */
- { pinmux(11), 2, 1 } /* MDIO_D */
-};
-
-const struct pinmux_config emac_pins_rmii_clk_source[] = {
- { pinmux(9), 0, 5 } /* ref.clk from external source */
-};
-
-/* UART2 pin muxer settings */
-const struct pinmux_config uart2_pins_txrx[] = {
- { pinmux(8), 2, 7 }, /* UART2_RXD */
- { pinmux(9), 2, 0 } /* UART2_TXD */
-};
-
-/* I2C0 pin muxer settings */
-const struct pinmux_config i2c0_pins[] = {
- { pinmux(8), 2, 3 }, /* I2C0_SDA */
- { pinmux(8), 2, 4 } /* I2C0_SCL */
-};
-
-/* USB0_DRVVBUS pin muxer settings */
-const struct pinmux_config usb_pins[] = {
- { pinmux(9), 1, 1 } /* USB0_DRVVBUS */
-};
-
-#ifdef CONFIG_DAVINCI_MMC
-/* MMC0 pin muxer settings */
-const struct pinmux_config mmc0_pins_8bit[] = {
- { pinmux(15), 2, 7 }, /* MMCSD0_CLK */
- { pinmux(16), 2, 0 }, /* MMCSD0_CMD */
- { pinmux(13), 2, 6 }, /* MMCSD0_DAT_0 */
- { pinmux(13), 2, 7 }, /* MMCSD0_DAT_1 */
- { pinmux(14), 2, 0 }, /* MMCSD0_DAT_2 */
- { pinmux(14), 2, 1 }, /* MMCSD0_DAT_3 */
- { pinmux(14), 2, 2 }, /* MMCSD0_DAT_4 */
- { pinmux(14), 2, 3 }, /* MMCSD0_DAT_5 */
- { pinmux(14), 2, 4 }, /* MMCSD0_DAT_6 */
- { pinmux(14), 2, 5 } /* MMCSD0_DAT_7 */
- /* DA830 supports 8-bit mode */
-};
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
deleted file mode 100644
index 19730ce..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * SoC-specific lowlevel code for DA850
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <nand.h>
-#include <ns16550.h>
-#include <post.h>
-#include <asm/arch/da850_lowlevel.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/ddr2_defs.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/pll_defs.h>
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x00006001;
-}
-
-#if defined(CONFIG_SYS_DA850_PLL_INIT)
-static void da850_waitloop(unsigned long loopcnt)
-{
- unsigned long i;
-
- for (i = 0; i < loopcnt; i++)
- asm(" NOP");
-}
-
-static int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
-{
- if (reg == davinci_pllc0_regs)
- /* Unlock PLL registers. */
- clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK);
-
- /*
- * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
- * through MMR
- */
- clrbits_le32(&reg->pllctl, PLLCTL_PLLENSRC);
- /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
- clrbits_le32(&reg->pllctl, PLLCTL_EXTCLKSRC);
-
- /* Set PLLEN=0 => PLL BYPASS MODE */
- clrbits_le32(&reg->pllctl, PLLCTL_PLLEN);
-
- da850_waitloop(150);
-
- if (reg == davinci_pllc0_regs) {
- /*
- * Select the Clock Mode bit 8 as External Clock or On Chip
- * Oscilator
- */
- dv_maskbits(&reg->pllctl, ~PLLCTL_RES_9);
- setbits_le32(&reg->pllctl,
- (CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT));
- }
-
- /* Clear PLLRST bit to reset the PLL */
- clrbits_le32(&reg->pllctl, PLLCTL_PLLRST);
-
- /* Disable the PLL output */
- setbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
-
- /* PLL initialization sequence */
- /*
- * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
- * power down bit
- */
- clrbits_le32(&reg->pllctl, PLLCTL_PLLPWRDN);
-
- /* Enable the PLL from Disable Mode PLLDIS bit to 0 */
- clrbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
-
-#if defined(CONFIG_SYS_DA850_PLL0_PREDIV)
- /* program the prediv */
- if (reg == davinci_pllc0_regs && CONFIG_SYS_DA850_PLL0_PREDIV)
- writel((PLL_DIVEN | CONFIG_SYS_DA850_PLL0_PREDIV),
- &reg->prediv);
-#endif
-
- /* Program the required multiplier value in PLLM */
- writel(pllmult, &reg->pllm);
-
- /* program the postdiv */
- if (reg == davinci_pllc0_regs)
- writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV),
- &reg->postdiv);
- else
- writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV),
- &reg->postdiv);
-
- /*
- * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
- * no GO operation is currently in progress
- */
- while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
- ;
-
- if (reg == davinci_pllc0_regs) {
- writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, &reg->plldiv1);
- writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, &reg->plldiv2);
- writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, &reg->plldiv3);
- writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, &reg->plldiv4);
- writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, &reg->plldiv5);
- writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, &reg->plldiv6);
- writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, &reg->plldiv7);
- } else {
- writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, &reg->plldiv1);
- writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, &reg->plldiv2);
- writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, &reg->plldiv3);
- }
-
- /*
- * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
- * transition.
- */
- setbits_le32(&reg->pllcmd, PLLCMD_GOSTAT);
-
- /*
- * Wait for the GOSTAT bit in PLLSTAT to clear to 0
- * (completion of phase alignment).
- */
- while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
- ;
-
- /* Wait for PLL to reset properly. See PLL spec for PLL reset time */
- da850_waitloop(200);
-
- /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
- setbits_le32(&reg->pllctl, PLLCTL_PLLRST);
-
- /* Wait for PLL to lock. See PLL spec for PLL lock time */
- da850_waitloop(2400);
-
- /*
- * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
- * mode
- */
- setbits_le32(&reg->pllctl, PLLCTL_PLLEN);
-
-
- /*
- * clear EMIFA and EMIFB clock source settings, let them
- * run off SYSCLK
- */
- if (reg == davinci_pllc0_regs)
- dv_maskbits(&davinci_syscfg_regs->cfgchip3,
- ~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC));
-
- return 0;
-}
-#endif /* CONFIG_SYS_DA850_PLL_INIT */
-
-#if defined(CONFIG_SYS_DA850_DDR_INIT)
-static int da850_ddr_setup(void)
-{
- unsigned long tmp;
-
- /* Enable the Clock to DDR2/mDDR */
- lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
- if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
- /* Begin VTP Calibration */
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
-
- /* Polling READY bit to see when VTP calibration is done */
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
- while ((tmp & VTP_READY) != VTP_READY)
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
-
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
- }
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
- writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
-
- if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) {
- /* DDR2 */
- clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
- (1 << DDR_SLEW_DDR_PDENA_BIT) |
- (1 << DDR_SLEW_CMOSEN_BIT));
- } else {
- /* MOBILE DDR */
- setbits_le32(&davinci_syscfg1_regs->ddr_slew,
- (1 << DDR_SLEW_DDR_PDENA_BIT) |
- (1 << DDR_SLEW_CMOSEN_BIT));
- }
-
- /*
- * SDRAM Configuration Register (SDCR):
- * First set the BOOTUNLOCK bit to make configuration bits
- * writeable.
- */
- setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
-
- /*
- * Write the new value of these bits and clear BOOTUNLOCK.
- * At the same time, set the TIMUNLOCK bit to allow changing
- * the timing registers
- */
- tmp = CONFIG_SYS_DA850_DDR2_SDBCR;
- tmp &= ~DV_DDR_BOOTUNLOCK;
- tmp |= DV_DDR_TIMUNLOCK;
- writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
-
- /* write memory configuration and timing */
- if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) {
- /* MOBILE DDR only*/
- writel(CONFIG_SYS_DA850_DDR2_SDBCR2,
- &dv_ddr2_regs_ctrl->sdbcr2);
- }
- writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
- writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
-
- /* clear the TIMUNLOCK bit and write the value of the CL field */
- tmp &= ~DV_DDR_TIMUNLOCK;
- writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
-
- /*
- * LPMODEN and MCLKSTOPEN must be set!
- * Without this bits set, PSC don;t switch states !!
- */
- writel(CONFIG_SYS_DA850_DDR2_SDRCR |
- (1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
- (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
- &dv_ddr2_regs_ctrl->sdrcr);
-
- /* SyncReset the Clock to EMIF3A SDRAM */
- lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
- /* Enable the Clock to EMIF3A SDRAM */
- lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
- /* disable self refresh */
- clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
- DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN);
- writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
-
- return 0;
-}
-#endif /* CONFIG_SYS_DA850_DDR_INIT */
-
-__attribute__((weak))
-void board_gpio_init(void)
-{
- return;
-}
-
-int arch_cpu_init(void)
-{
- /* Unlock kick registers */
- writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
- writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
-
- dv_maskbits(&davinci_syscfg_regs->suspsrc,
- CONFIG_SYS_DA850_SYSCFG_SUSPSRC);
-
- /* configure pinmux settings */
- if (davinci_configure_pin_mux_items(pinmuxes, pinmuxes_size))
- return 1;
-
-#if defined(CONFIG_SYS_DA850_PLL_INIT)
- /* PLL setup */
- da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM);
- da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM);
-#endif
- /* setup CSn config */
-#if defined(CONFIG_SYS_DA850_CS2CFG)
- writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
-#endif
-#if defined(CONFIG_SYS_DA850_CS3CFG)
- writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
-#endif
-
- da8xx_configure_lpsc_items(lpsc, lpsc_size);
-
- /* GPIO setup */
- board_gpio_init();
-
-
- NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
- CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-
- /*
- * Fix Power and Emulation Management Register
- * see sprufw3a.pdf page 37 Table 24
- */
- writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
- DAVINCI_UART_PWREMU_MGMT_UTRST),
-#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE)
- &davinci_uart0_ctrl_regs->pwremu_mgmt);
-#else
- &davinci_uart2_ctrl_regs->pwremu_mgmt);
-#endif
-
-#if defined(CONFIG_SYS_DA850_DDR_INIT)
- da850_ddr_setup();
-#endif
-
- return 0;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
deleted file mode 100644
index 6105f63..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Pinmux configurations for the DA850 SoCs
- *
- * Copyright (C) 2011 OMICRON electronics GmbH
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pinmux_defs.h>
-
-/* SPI pin muxer settings */
-const struct pinmux_config spi1_pins_base[] = {
- { pinmux(5), 1, 2 }, /* SPI1_CLK */
- { pinmux(5), 1, 4 }, /* SPI1_SOMI */
- { pinmux(5), 1, 5 }, /* SPI1_SIMO */
-};
-
-const struct pinmux_config spi1_pins_scs0[] = {
- { pinmux(5), 1, 1 }, /* SPI1_SCS[0] */
-};
-
-/* UART pin muxer settings */
-const struct pinmux_config uart0_pins_txrx[] = {
- { pinmux(3), 2, 4 }, /* UART0_RXD */
- { pinmux(3), 2, 5 }, /* UART0_TXD */
-};
-
-const struct pinmux_config uart0_pins_rtscts[] = {
- { pinmux(3), 2, 6 },
- { pinmux(3), 2, 7 },
-};
-
-const struct pinmux_config uart1_pins_txrx[] = {
- { pinmux(4), 2, 6 }, /* UART1_RXD */
- { pinmux(4), 2, 7 }, /* UART1_TXD */
-};
-
-const struct pinmux_config uart2_pins_txrx[] = {
- { pinmux(4), 2, 4 }, /* UART2_RXD */
- { pinmux(4), 2, 5 }, /* UART2_TXD */
-};
-
-const struct pinmux_config uart2_pins_rtscts[] = {
- { pinmux(0), 4, 6 }, /* UART2_RTS */
- { pinmux(0), 4, 7 }, /* UART2_CTS */
-};
-
-/* EMAC pin muxer settings*/
-const struct pinmux_config emac_pins_rmii[] = {
- { pinmux(14), 8, 2 }, /* RMII_TXD[1] */
- { pinmux(14), 8, 3 }, /* RMII_TXD[0] */
- { pinmux(14), 8, 4 }, /* RMII_TXEN */
- { pinmux(14), 8, 5 }, /* RMII_RXD[1] */
- { pinmux(14), 8, 6 }, /* RMII_RXD[0] */
- { pinmux(14), 8, 7 }, /* RMII_RXER */
- { pinmux(15), 0, 0 }, /* RMII_MHz_50_CLK */
- { pinmux(15), 8, 1 }, /* RMII_CRS_DV */
-};
-
-const struct pinmux_config emac_pins_mii[] = {
- { pinmux(2), 8, 1 }, /* MII_TXEN */
- { pinmux(2), 8, 2 }, /* MII_TXCLK */
- { pinmux(2), 8, 3 }, /* MII_COL */
- { pinmux(2), 8, 4 }, /* MII_TXD[3] */
- { pinmux(2), 8, 5 }, /* MII_TXD[2] */
- { pinmux(2), 8, 6 }, /* MII_TXD[1] */
- { pinmux(2), 8, 7 }, /* MII_TXD[0] */
- { pinmux(3), 8, 0 }, /* MII_RXCLK */
- { pinmux(3), 8, 1 }, /* MII_RXDV */
- { pinmux(3), 8, 2 }, /* MII_RXER */
- { pinmux(3), 8, 3 }, /* MII_CRS */
- { pinmux(3), 8, 4 }, /* MII_RXD[3] */
- { pinmux(3), 8, 5 }, /* MII_RXD[2] */
- { pinmux(3), 8, 6 }, /* MII_RXD[1] */
- { pinmux(3), 8, 7 }, /* MII_RXD[0] */
-};
-
-const struct pinmux_config emac_pins_mdio[] = {
- { pinmux(4), 8, 0 }, /* MDIO_CLK */
- { pinmux(4), 8, 1 }, /* MDIO_D */
-};
-
-/* I2C pin muxer settings */
-const struct pinmux_config i2c0_pins[] = {
- { pinmux(4), 2, 2 }, /* I2C0_SCL */
- { pinmux(4), 2, 3 }, /* I2C0_SDA */
-};
-
-const struct pinmux_config i2c1_pins[] = {
- { pinmux(4), 4, 4 }, /* I2C1_SCL */
- { pinmux(4), 4, 5 }, /* I2C1_SDA */
-};
-
-/* EMIFA pin muxer settings */
-const struct pinmux_config emifa_pins_cs2[] = {
- { pinmux(7), 1, 0 }, /* EMA_CS2 */
-};
-
-const struct pinmux_config emifa_pins_cs3[] = {
- { pinmux(7), 1, 1 }, /* EMA_CS[3] */
-};
-
-const struct pinmux_config emifa_pins_cs4[] = {
- { pinmux(7), 1, 2 }, /* EMA_CS[4] */
-};
-
-const struct pinmux_config emifa_pins_nand[] = {
- { pinmux(7), 1, 4 }, /* EMA_WE */
- { pinmux(7), 1, 5 }, /* EMA_OE */
- { pinmux(9), 1, 0 }, /* EMA_D[7] */
- { pinmux(9), 1, 1 }, /* EMA_D[6] */
- { pinmux(9), 1, 2 }, /* EMA_D[5] */
- { pinmux(9), 1, 3 }, /* EMA_D[4] */
- { pinmux(9), 1, 4 }, /* EMA_D[3] */
- { pinmux(9), 1, 5 }, /* EMA_D[2] */
- { pinmux(9), 1, 6 }, /* EMA_D[1] */
- { pinmux(9), 1, 7 }, /* EMA_D[0] */
- { pinmux(12), 1, 5 }, /* EMA_A[2] */
- { pinmux(12), 1, 6 }, /* EMA_A[1] */
-};
-
-/* NOR pin muxer settings */
-const struct pinmux_config emifa_pins_nor[] = {
- { pinmux(5), 1, 6 }, /* EMA_BA[1] */
- { pinmux(6), 1, 6 }, /* EMA_WAIT[1] */
- { pinmux(7), 1, 4 }, /* EMA_WE */
- { pinmux(7), 1, 5 }, /* EMA_OE */
- { pinmux(8), 1, 0 }, /* EMA_D[15] */
- { pinmux(8), 1, 1 }, /* EMA_D[14] */
- { pinmux(8), 1, 2 }, /* EMA_D[13] */
- { pinmux(8), 1, 3 }, /* EMA_D[12] */
- { pinmux(8), 1, 4 }, /* EMA_D[11] */
- { pinmux(8), 1, 5 }, /* EMA_D[10] */
- { pinmux(8), 1, 6 }, /* EMA_D[9] */
- { pinmux(8), 1, 7 }, /* EMA_D[8] */
- { pinmux(9), 1, 0 }, /* EMA_D[7] */
- { pinmux(9), 1, 1 }, /* EMA_D[6] */
- { pinmux(9), 1, 2 }, /* EMA_D[5] */
- { pinmux(9), 1, 3 }, /* EMA_D[4] */
- { pinmux(9), 1, 4 }, /* EMA_D[3] */
- { pinmux(9), 1, 5 }, /* EMA_D[2] */
- { pinmux(9), 1, 6 }, /* EMA_D[1] */
- { pinmux(9), 1, 7 }, /* EMA_D[0] */
- { pinmux(10), 1, 1 }, /* EMA_A[22] */
- { pinmux(10), 1, 2 }, /* EMA_A[21] */
- { pinmux(10), 1, 3 }, /* EMA_A[20] */
- { pinmux(10), 1, 4 }, /* EMA_A[19] */
- { pinmux(10), 1, 5 }, /* EMA_A[18] */
- { pinmux(10), 1, 6 }, /* EMA_A[17] */
- { pinmux(10), 1, 7 }, /* EMA_A[16] */
- { pinmux(11), 1, 0 }, /* EMA_A[15] */
- { pinmux(11), 1, 1 }, /* EMA_A[14] */
- { pinmux(11), 1, 2 }, /* EMA_A[13] */
- { pinmux(11), 1, 3 }, /* EMA_A[12] */
- { pinmux(11), 1, 4 }, /* EMA_A[11] */
- { pinmux(11), 1, 5 }, /* EMA_A[10] */
- { pinmux(11), 1, 6 }, /* EMA_A[9] */
- { pinmux(11), 1, 7 }, /* EMA_A[8] */
- { pinmux(12), 1, 0 }, /* EMA_A[7] */
- { pinmux(12), 1, 1 }, /* EMA_A[6] */
- { pinmux(12), 1, 2 }, /* EMA_A[5] */
- { pinmux(12), 1, 3 }, /* EMA_A[4] */
- { pinmux(12), 1, 4 }, /* EMA_A[3] */
- { pinmux(12), 1, 5 }, /* EMA_A[2] */
- { pinmux(12), 1, 6 }, /* EMA_A[1] */
- { pinmux(12), 1, 7 }, /* EMA_A[0] */
-};
-
-/* MMC0 pin muxer settings */
-const struct pinmux_config mmc0_pins[] = {
- { pinmux(10), 2, 0 }, /* MMCSD0_CLK */
- { pinmux(10), 2, 1 }, /* MMCSD0_CMD */
- { pinmux(10), 2, 2 }, /* MMCSD0_DAT_0 */
- { pinmux(10), 2, 3 }, /* MMCSD0_DAT_1 */
- { pinmux(10), 2, 4 }, /* MMCSD0_DAT_2 */
- { pinmux(10), 2, 5 }, /* MMCSD0_DAT_3 */
- /* DA850 supports only 4-bit mode, remaining pins are not configured */
-};
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm355.c b/arch/arm/cpu/arm926ejs/davinci/dm355.c
deleted file mode 100644
index f9550a1..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm355.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * SoC-specific code for tms320dm355 and similar chips
- *
- * Copyright (C) 2009 David Brownell
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x00006001;
-}
-
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_LPSC_I2C);
-
- /* Enable I2C pin Mux */
- REG(PINMUX3) |= (1 << 20) | (1 << 19);
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365.c b/arch/arm/cpu/arm926ejs/davinci/dm365.c
deleted file mode 100644
index f6ca527..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm365.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * SoC-specific code for tms320dm365 and similar chips
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-}
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_LPSC_I2C);
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
deleted file mode 100644
index c8b4498..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * SoC-specific lowlevel code for tms320dm365 and similar chips
- * Actually used for booting from NAND with nand_spl.
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <nand.h>
-#include <ns16550.h>
-#include <post.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/dm365_lowlevel.h>
-#include <asm/arch/hardware.h>
-
-void dm365_waitloop(unsigned long loopcnt)
-{
- unsigned long i;
-
- for (i = 0; i < loopcnt; i++)
- asm(" NOP");
-}
-
-int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
-{
- unsigned int clksrc = 0x0;
-
- /* Power up the PLL */
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN);
-
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9);
- setbits_le32(&dv_pll0_regs->pllctl,
- clksrc << PLLCTL_CLOCK_MODE_SHIFT);
-
- /*
- * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
- * through MMR
- */
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLENSRC);
-
- /* Set PLLEN=0 => PLL BYPASS MODE */
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN);
-
- dm365_waitloop(150);
-
- /* PLLRST=1(reset assert) */
- setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST);
-
- dm365_waitloop(300);
-
- /*Bring PLL out of Reset*/
- clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST);
-
- /* Program the Multiper and Pre-Divider for PLL1 */
- writel(pllmult, &dv_pll0_regs->pllm);
- writel(prediv, &dv_pll0_regs->prediv);
-
- /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
- PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
- /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE,
- &dv_pll0_regs->secctl);
- /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */
- writel(PLLSECCTL_STOPMODE, &dv_pll0_regs->secctl);
- /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
-
- /* Program the PostDiv for PLL1 */
- writel(PLL_POSTDEN, &dv_pll0_regs->postdiv);
-
- /* Post divider setting for PLL1 */
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV2, &dv_pll0_regs->plldiv2);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV3, &dv_pll0_regs->plldiv3);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV4, &dv_pll0_regs->plldiv4);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV5, &dv_pll0_regs->plldiv5);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV6, &dv_pll0_regs->plldiv6);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV7, &dv_pll0_regs->plldiv7);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV8, &dv_pll0_regs->plldiv8);
- writel(CONFIG_SYS_DM36x_PLL1_PLLDIV9, &dv_pll0_regs->plldiv9);
-
- dm365_waitloop(300);
-
- /* Set the GOSET bit */
- writel(PLLCMD_GOSET, &dv_pll0_regs->pllcmd); /* Go */
-
- dm365_waitloop(300);
-
- /* Wait for PLL to LOCK */
- while (!((readl(&dv_sys_module_regs->pll0_config) & PLL0_LOCK)
- == PLL0_LOCK))
- ;
-
- /* Enable the PLL Bit of PLLCTL*/
- setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN);
-
- return 0;
-}
-
-int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
-{
- unsigned int clksrc = 0x0;
-
- /* Power up the PLL*/
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLPWRDN);
-
- /*
- * Select the Clock Mode as Onchip Oscilator or External Clock on
- * MXI pin
- * VDB has input on MXI pin
- */
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9);
- setbits_le32(&dv_pll1_regs->pllctl,
- clksrc << PLLCTL_CLOCK_MODE_SHIFT);
-
- /*
- * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
- * through MMR
- */
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLENSRC);
-
- /* Set PLLEN=0 => PLL BYPASS MODE */
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN);
-
- dm365_waitloop(50);
-
- /* PLLRST=1(reset assert) */
- setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST);
-
- dm365_waitloop(300);
-
- /* Bring PLL out of Reset */
- clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST);
-
- /* Program the Multiper and Pre-Divider for PLL2 */
- writel(pllm, &dv_pll1_regs->pllm);
- writel(prediv, &dv_pll1_regs->prediv);
-
- writel(PLL_POSTDEN, &dv_pll1_regs->postdiv);
-
- /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
- PLLSECCTL_TINITZ, &dv_pll1_regs->secctl);
- /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE,
- &dv_pll1_regs->secctl);
- /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */
- writel(PLLSECCTL_STOPMODE, &dv_pll1_regs->secctl);
- /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */
- writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll1_regs->secctl);
-
- /* Post divider setting for PLL2 */
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV1, &dv_pll1_regs->plldiv1);
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV2, &dv_pll1_regs->plldiv2);
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV3, &dv_pll1_regs->plldiv3);
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV4, &dv_pll1_regs->plldiv4);
- writel(CONFIG_SYS_DM36x_PLL2_PLLDIV5, &dv_pll1_regs->plldiv5);
-
- /* GoCmd for PostDivider to take effect */
- writel(PLLCMD_GOSET, &dv_pll1_regs->pllcmd);
-
- dm365_waitloop(150);
-
- /* Wait for PLL to LOCK */
- while (!((readl(&dv_sys_module_regs->pll1_config) & PLL1_LOCK)
- == PLL1_LOCK))
- ;
-
- dm365_waitloop(4100);
-
- /* Enable the PLL2 */
- setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN);
-
- /* do this after PLL's have been set up */
- writel(CONFIG_SYS_DM36x_PERI_CLK_CTRL,
- &dv_sys_module_regs->peri_clkctl);
-
- return 0;
-}
-
-int dm365_ddr_setup(void)
-{
- lpsc_on(DAVINCI_LPSC_DDR_EMIF);
- clrbits_le32(&dv_sys_module_regs->vtpiocr,
- VPTIO_IOPWRDN | VPTIO_CLRZ | VPTIO_LOCK | VPTIO_PWRDN);
-
- /* Set bit CLRZ (bit 13) */
- setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_CLRZ);
-
- /* Check VTP READY Status */
- while (!(readl(&dv_sys_module_regs->vtpiocr) & VPTIO_RDY))
- ;
-
- /* Set bit VTP_IOPWRDWN bit 14 for DDR input buffers) */
- setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_IOPWRDN);
-
- /* Set bit LOCK(bit7) */
- setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_LOCK);
-
- /*
- * Powerdown VTP as it is locked (bit 6)
- * Set bit VTP_IOPWRDWN bit 14 for DDR input buffers)
- */
- setbits_le32(&dv_sys_module_regs->vtpiocr,
- VPTIO_IOPWRDN | VPTIO_PWRDN);
-
- /* Wait for calibration to complete */
- dm365_waitloop(150);
-
- /* Set the DDR2 to synreset, then enable it again */
- lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
- lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
- writel(CONFIG_SYS_DM36x_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
-
- /* Program SDRAM Bank Config Register */
- writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_BOOTUNLOCK),
- &dv_ddr2_regs_ctrl->sdbcr);
- writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_TIMUNLOCK),
- &dv_ddr2_regs_ctrl->sdbcr);
-
- /* Program SDRAM Timing Control Register1 */
- writel(CONFIG_SYS_DM36x_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
- /* Program SDRAM Timing Control Register2 */
- writel(CONFIG_SYS_DM36x_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
-
- writel(CONFIG_SYS_DM36x_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
-
- writel(CONFIG_SYS_DM36x_DDR2_SDBCR, &dv_ddr2_regs_ctrl->sdbcr);
-
- /* Program SDRAM Refresh Control Register */
- writel(CONFIG_SYS_DM36x_DDR2_SDRCR, &dv_ddr2_regs_ctrl->sdrcr);
-
- lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
- lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
- return 0;
-}
-
-static void dm365_vpss_sync_reset(void)
-{
- unsigned int PdNum = 0;
-
- /* VPSS_CLKMD 1:1 */
- setbits_le32(&dv_sys_module_regs->vpss_clkctl,
- VPSS_CLK_CTL_VPSS_CLKMD);
-
- /* LPSC SyncReset DDR Clock Enable */
- writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) &
- ~PSC_MD_STATE_MSK) | PSC_SYNCRESET),
- &dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]);
-
- writel((1 << PdNum), &dv_psc_regs->ptcmd);
-
- while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0))
- ;
- while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) &
- PSC_MD_STATE_MSK) == PSC_SYNCRESET))
- ;
-}
-
-static void dm365_por_reset(void)
-{
- struct davinci_timer *wdog =
- (struct davinci_timer *)DAVINCI_WDOG_BASE;
-
- if (readl(&dv_pll0_regs->rstype) &
- (PLL_RSTYPE_POR | PLL_RSTYPE_XWRST)) {
- dm365_vpss_sync_reset();
-
- writel(DV_TMPBUF_VAL, TMPBUF);
- setbits_le32(TMPSTATUS, FLAG_PORRST);
- writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1);
- writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2);
-
- while (1);
- }
-}
-
-static void dm365_wdt_reset(void)
-{
- struct davinci_timer *wdog =
- (struct davinci_timer *)DAVINCI_WDOG_BASE;
-
- if (readl(TMPBUF) != DV_TMPBUF_VAL) {
- writel(DV_TMPBUF_VAL, TMPBUF);
- setbits_le32(TMPSTATUS, FLAG_PORRST);
- setbits_le32(TMPSTATUS, FLAG_FLGOFF);
-
- dm365_waitloop(100);
-
- dm365_vpss_sync_reset();
-
- writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1);
- writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2);
-
- while (1);
- }
-}
-
-static void dm365_wdt_flag_on(void)
-{
- /* VPSS_CLKMD 1:2 */
- clrbits_le32(&dv_sys_module_regs->vpss_clkctl,
- VPSS_CLK_CTL_VPSS_CLKMD);
- writel(0, TMPBUF);
- setbits_le32(TMPSTATUS, FLAG_FLGON);
-}
-
-void dm365_psc_init(void)
-{
- unsigned char i = 0;
- unsigned char lpsc_start;
- unsigned char lpsc_end, lpscgroup, lpscmin, lpscmax;
- unsigned int PdNum = 0;
-
- lpscmin = 0;
- lpscmax = 2;
-
- for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) {
- if (lpscgroup == 0) {
- /* Enabling LPSC 3 to 28 SCR first */
- lpsc_start = DAVINCI_LPSC_VPSSMSTR;
- lpsc_end = DAVINCI_LPSC_TIMER1;
- } else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */
- lpsc_start = DAVINCI_LPSC_CFG5;
- lpsc_end = DAVINCI_LPSC_VPSSMASTER;
- } else {
- lpsc_start = DAVINCI_LPSC_MJCP;
- lpsc_end = DAVINCI_LPSC_HDVICP;
- }
-
- /* NEXT=0x3, Enable LPSC's */
- for (i = lpsc_start; i <= lpsc_end; i++)
- setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE);
-
- /*
- * Program goctl to start transition sequence for LPSCs
- * CSL_PSC_0_REGS->PTCMD = (1<<PdNum); Kick off Power
- * Domain 0 Modules
- */
- writel((1 << PdNum), &dv_psc_regs->ptcmd);
-
- /*
- * Wait for GOSTAT = NO TRANSITION from PSC for Powerdomain 0
- */
- while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT)
- == 0))
- ;
-
- /* Wait for MODSTAT = ENABLE from LPSC's */
- for (i = lpsc_start; i <= lpsc_end; i++)
- while (!((readl(&dv_psc_regs->mdstat[i]) &
- PSC_MD_STATE_MSK) == PSC_ENABLE))
- ;
- }
-}
-
-static void dm365_emif_init(void)
-{
- writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr);
- writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr);
-
- setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND);
-
- writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr);
-
- return;
-}
-
-void dm365_pinmux_ctl(unsigned long offset, unsigned long mask,
- unsigned long value)
-{
- clrbits_le32(&dv_sys_module_regs->pinmux[offset], mask);
- setbits_le32(&dv_sys_module_regs->pinmux[offset], (mask & value));
-}
-
-__attribute__((weak))
-void board_gpio_init(void)
-{
- return;
-}
-
-#if defined(CONFIG_POST)
-int post_log(char *format, ...)
-{
- return 0;
-}
-#endif
-
-void dm36x_lowlevel_init(ulong bootflag)
-{
- struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs =
- (struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 +
- DAVINCI_UART_CTRL_BASE);
-
- /* Mask all interrupts */
- writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl);
- writel(0x0, &dv_aintc_regs->eabase);
- writel(0x0, &dv_aintc_regs->eint0);
- writel(0x0, &dv_aintc_regs->eint1);
-
- /* Clear all interrupts */
- writel(0xffffffff, &dv_aintc_regs->fiq0);
- writel(0xffffffff, &dv_aintc_regs->fiq1);
- writel(0xffffffff, &dv_aintc_regs->irq0);
- writel(0xffffffff, &dv_aintc_regs->irq1);
-
- dm365_por_reset();
- dm365_wdt_reset();
-
- /* System PSC setup - enable all */
- dm365_psc_init();
-
- /* Setup Pinmux */
- dm365_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX0);
- dm365_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX1);
- dm365_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX2);
- dm365_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX3);
- dm365_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX4);
-
- /* PLL setup */
- dm365_pll1_init(CONFIG_SYS_DM36x_PLL1_PLLM,
- CONFIG_SYS_DM36x_PLL1_PREDIV);
- dm365_pll2_init(CONFIG_SYS_DM36x_PLL2_PLLM,
- CONFIG_SYS_DM36x_PLL2_PREDIV);
-
- /* GPIO setup */
- board_gpio_init();
-
- NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
- CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-
- /*
- * Fix Power and Emulation Management Register
- * see sprufh2.pdf page 38 Table 22
- */
- writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
- DAVINCI_UART_PWREMU_MGMT_UTRST),
- &davinci_uart_ctrl_regs->pwremu_mgmt);
-
- puts("ddr init\n");
- dm365_ddr_setup();
-
- puts("emif init\n");
- dm365_emif_init();
-
- dm365_wdt_flag_on();
-
-#if defined(CONFIG_POST)
- /*
- * Do memory tests, calls arch_memory_failure_handle()
- * if error detected.
- */
- memory_post_test(0);
-#endif
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm644x.c b/arch/arm/cpu/arm926ejs/davinci/dm644x.c
deleted file mode 100644
index c58e271..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm644x.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * SoC-specific code for tms320dm644x chips
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-
-#define PINMUX0_EMACEN (1 << 31)
-#define PINMUX0_AECS5 (1 << 11)
-#define PINMUX0_AECS4 (1 << 10)
-
-#define PINMUX1_I2C (1 << 7)
-#define PINMUX1_UART1 (1 << 1)
-#define PINMUX1_UART0 (1 << 0)
-
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x00006001;
-
- /* Enable UART0 MUX lines */
- REG(PINMUX1) |= PINMUX1_UART0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-void davinci_enable_emac(void)
-{
- lpsc_on(DAVINCI_LPSC_EMAC);
- lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
- lpsc_on(DAVINCI_LPSC_MDIO);
-
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0;
-
- /* Enable EMAC. */
- REG(PINMUX0) |= PINMUX0_EMACEN;
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_LPSC_I2C);
-
- /* Enable I2C pin Mux */
- REG(PINMUX1) |= PINMUX1_I2C;
-}
-#endif
-
-void davinci_errata_workarounds(void)
-{
- /*
- * Workaround for TMS320DM6446 errata 1.3.22:
- * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
- * Revision(s) Affected: 1.3 and earlier
- */
- REG(PSC_SILVER_BULLET) = 0;
-
- /*
- * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
- * as suggested in TMS320DM6446 errata 2.1.2:
- *
- * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
- * low priority modules can occupy the bus and prevent high priority
- * modules like the VPSS from getting the required DDR2 throughput.
- * A hex value of 0x20 should provide a good ARM (cache enabled)
- * performance and still allow good utilization by the VPSS or other
- * modules.
- */
- REG(VBPR) = 0x20;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm646x.c b/arch/arm/cpu/arm926ejs/davinci/dm646x.c
deleted file mode 100644
index cfea830..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm646x.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * SoC-specific code for TMS320DM646x chips
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/arch/hardware.h>
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_DM646X_LPSC_UART0);
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-void davinci_enable_emac(void)
-{
- lpsc_on(DAVINCI_DM646X_LPSC_EMAC);
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_DM646X_LPSC_I2C);
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/dp83848.c b/arch/arm/cpu/arm926ejs/davinci/dp83848.c
deleted file mode 100644
index 603d507..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/dp83848.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * National Semiconductor DP83848 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-#include <dp83848.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-int dp83848_is_phy_connected(int phy_addr)
-{
- u_int16_t id1, id2;
-
- if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
- return(0);
- if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
- return(0);
-
- if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
- return(1);
-
- return(0);
-}
-
-int dp83848_get_link_speed(int phy_addr)
-{
- u_int16_t tmp;
- volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
-
- if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
- return(0);
-
- if (!(tmp & DP83848_LINK_STATUS)) /* link up? */
- return(0);
-
- if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
- return(0);
-
- /* Speed doesn't matter, there is no setting for it in EMAC... */
- if (tmp & DP83848_DUPLEX) {
- /* set DM644x EMAC for Full Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
- EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
- } else {
- /*set DM644x EMAC for Half Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
- }
-
- return(1);
-}
-
-
-int dp83848_init_phy(int phy_addr)
-{
- int ret = 1;
-
- if (!dp83848_get_link_speed(phy_addr)) {
- /* Try another time */
- udelay(100000);
- ret = dp83848_get_link_speed(phy_addr);
- }
-
- /* Disable PHY Interrupts */
- davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
-
- return(ret);
-}
-
-
-int dp83848_auto_negotiate(int phy_addr)
-{
- u_int16_t tmp;
-
-
- if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
- return(0);
-
- /* Restart Auto_negotiation */
- tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */
- tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */
- davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
- /* Set the Auto_negotiation Advertisement Register
- * MII advertising for Next page, 100BaseTxFD and HD,
- * 10BaseTFD and HD, IEEE 802.3
- */
- tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
- DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
- davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
-
-
- /* Read Control Register */
- if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
- return(0);
-
- tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
- davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
- /* Restart Auto_negotiation */
- tmp |= DP83848_RESTART_AUTONEG;
- davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
- /*check AutoNegotiate complete */
- udelay(10000);
- if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
- return(0);
-
- if (!(tmp & DP83848_AUTONEG_COMP))
- return(0);
-
- return (dp83848_get_link_speed(phy_addr));
-}
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm926ejs/davinci/et1011c.c b/arch/arm/cpu/arm926ejs/davinci/et1011c.c
deleted file mode 100644
index 9d53875..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/et1011c.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * LSI ET1011C PHY Driver for TI DaVinci(TMS320DM6467) board.
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-#include <miiphy.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-/* LSI PHYSICAL LAYER TRANSCEIVER ET1011C */
-
-#define MII_PHY_CONFIG_REG 22
-
-/* PHY Config bits */
-#define PHY_SYS_CLK_EN (1 << 4)
-
-int et1011c_get_link_speed(int phy_addr)
-{
- u_int16_t data;
-
- if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &data) && (data & 0x04)) {
- davinci_eth_phy_read(phy_addr, MII_PHY_CONFIG_REG, &data);
- /* Enable 125MHz clock sourced from PHY */
- davinci_eth_phy_write(phy_addr, MII_PHY_CONFIG_REG,
- data | PHY_SYS_CLK_EN);
- return (1);
- }
- return (0);
-}
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c b/arch/arm/cpu/arm926ejs/davinci/ksz8873.c
deleted file mode 100644
index 4af5dd2..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Micrel KSZ8873 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2011 Heiko Schocher <hsdenx.de>
- *
- * based on:
- * National Semiconductor DP83848 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <net.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/io.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-int ksz8873_is_phy_connected(int phy_addr)
-{
- u_int16_t dummy;
-
- return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy);
-}
-
-int ksz8873_get_link_speed(int phy_addr)
-{
- emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
-
- /* we always have a link to the switch, 100 FD */
- writel((EMAC_MACCONTROL_MIIEN_ENABLE |
- EMAC_MACCONTROL_FULLDUPLEX_ENABLE),
- &emac->MACCONTROL);
- return 1;
-}
-
-
-int ksz8873_init_phy(int phy_addr)
-{
- return 1;
-}
-
-
-int ksz8873_auto_negotiate(int phy_addr)
-{
- return dp83848_get_link_speed(phy_addr);
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S b/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
deleted file mode 100644
index e916234..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
+++ /dev/null
@@ -1,693 +0,0 @@
-/*
- * Low-level board setup code for TI DaVinci SoC based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Partially based on TI sources, original copyrights follow:
- */
-
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
- *
- * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004
- *
- * Modified for DV-EVM board by Rishi Bhattacharya, Apr 2005
- *
- * Modified for DV-EVM board by Swaminathan S, Nov 2005
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-
-#define MDSTAT_STATE 0x3f
-
-.globl lowlevel_init
-lowlevel_init:
-#ifdef CONFIG_SOC_DM644X
-
- /*-------------------------------------------------------*
- * Mask all IRQs by setting all bits in the EINT default *
- *-------------------------------------------------------*/
- mov r1, $0
- ldr r0, =EINT_ENABLE0
- str r1, [r0]
- ldr r0, =EINT_ENABLE1
- str r1, [r0]
-
- /*------------------------------------------------------*
- * Put the GEM in reset *
- *------------------------------------------------------*/
-
- /* Put the GEM in reset */
- ldr r8, PSC_GEM_FLAG_CLEAR
- ldr r6, MDCTL_GEM
- ldr r7, [r6]
- and r7, r7, r8
- str r7, [r6]
-
- /* Enable the Power Domain Transition Command */
- ldr r6, PTCMD
- ldr r7, [r6]
- orr r7, r7, $0x02
- str r7, [r6]
-
- /* Check for Transition Complete(PTSTAT) */
-checkStatClkStopGem:
- ldr r6, PTSTAT
- ldr r7, [r6]
- ands r7, r7, $0x02
- bne checkStatClkStopGem
-
- /* Check for GEM Reset Completion */
-checkGemStatClkStop:
- ldr r6, MDSTAT_GEM
- ldr r7, [r6]
- ands r7, r7, $0x100
- bne checkGemStatClkStop
-
- /* Do this for enabling a WDT initiated reset this is a workaround
- for a chip bug. Not required under normal situations */
- ldr r6, P1394
- mov r10, $0
- str r10, [r6]
-
- /*------------------------------------------------------*
- * Enable L1 & L2 Memories in Fast mode *
- *------------------------------------------------------*/
- ldr r6, DFT_ENABLE
- mov r10, $0x01
- str r10, [r6]
-
- ldr r6, MMARG_BRF0
- ldr r10, MMARG_BRF0_VAL
- str r10, [r6]
-
- ldr r6, DFT_ENABLE
- mov r10, $0
- str r10, [r6]
-
- /*------------------------------------------------------*
- * DDR2 PLL Initialization *
- *------------------------------------------------------*/
-
- /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
- mov r10, $0
- ldr r6, PLL2_CTL
- ldr r7, PLL_CLKSRC_MASK
- ldr r8, [r6]
- and r8, r8, r7
- mov r9, r10, lsl $8
- orr r8, r8, r9
- str r8, [r6]
-
- /* Select the PLLEN source */
- ldr r7, PLL_ENSRC_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Bypass the PLL */
- ldr r7, PLL_BYPASS_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */
- mov r10, $0x20
-WaitPPL2Loop:
- subs r10, r10, $1
- bne WaitPPL2Loop
-
- /* Reset the PLL */
- ldr r7, PLL_RESET_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Power up the PLL */
- ldr r7, PLL_PWRUP_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Enable the PLL from Disable Mode */
- ldr r7, PLL_DISABLE_ENABLE_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Program the PLL Multiplier */
- ldr r6, PLL2_PLLM
- mov r2, $0x17 /* 162 MHz */
- str r2, [r6]
-
- /* Program the PLL2 Divisor Value */
- ldr r6, PLL2_DIV2
- mov r3, $0x01
- str r3, [r6]
-
- /* Program the PLL2 Divisor Value */
- ldr r6, PLL2_DIV1
- mov r4, $0x0b /* 54 MHz */
- str r4, [r6]
-
- /* PLL2 DIV2 MMR */
- ldr r8, PLL2_DIV_MASK
- ldr r6, PLL2_DIV2
- ldr r9, [r6]
- and r8, r8, r9
- mov r9, $0x01
- mov r9, r9, lsl $15
- orr r8, r8, r9
- str r8, [r6]
-
- /* Program the GOSET bit to take new divider values */
- ldr r6, PLL2_PLLCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Wait for Done */
- ldr r6, PLL2_PLLSTAT
-doneLoop_0:
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne doneLoop_0
-
- /* PLL2 DIV1 MMR */
- ldr r8, PLL2_DIV_MASK
- ldr r6, PLL2_DIV1
- ldr r9, [r6]
- and r8, r8, r9
- mov r9, $0x01
- mov r9, r9, lsl $15
- orr r8, r8, r9
- str r8, [r6]
-
- /* Program the GOSET bit to take new divider values */
- ldr r6, PLL2_PLLCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Wait for Done */
- ldr r6, PLL2_PLLSTAT
-doneLoop:
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne doneLoop
-
- /* Wait for PLL to Reset Properly */
- mov r10, $0x218
-ResetPPL2Loop:
- subs r10, r10, $1
- bne ResetPPL2Loop
-
- /* Bring PLL out of Reset */
- ldr r6, PLL2_CTL
- ldr r8, [r6]
- orr r8, r8, $0x08
- str r8, [r6]
-
- /* Wait for PLL to Lock */
- ldr r10, PLL_LOCK_COUNT
-PLL2Lock:
- subs r10, r10, $1
- bne PLL2Lock
-
- /* Enable the PLL */
- ldr r6, PLL2_CTL
- ldr r8, [r6]
- orr r8, r8, $0x01
- str r8, [r6]
-
- /*------------------------------------------------------*
- * Issue Soft Reset to DDR Module *
- *------------------------------------------------------*/
-
- /* Shut down the DDR2 LPSC Module */
- ldr r8, PSC_FLAG_CLEAR
- ldr r6, MDCTL_DDR2
- ldr r7, [r6]
- and r7, r7, r8
- orr r7, r7, $0x03
- str r7, [r6]
-
- /* Enable the Power Domain Transition Command */
- ldr r6, PTCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Check for Transition Complete(PTSTAT) */
-checkStatClkStop:
- ldr r6, PTSTAT
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne checkStatClkStop
-
- /* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkStop:
- ldr r6, MDSTAT_DDR2
- ldr r7, [r6]
- and r7, r7, $MDSTAT_STATE
- cmp r7, $0x03
- bne checkDDRStatClkStop
-
- /*------------------------------------------------------*
- * Program DDR2 MMRs for 162MHz Setting *
- *------------------------------------------------------*/
-
- /* Program PHY Control Register */
- ldr r6, DDRCTL
- ldr r7, DDRCTL_VAL
- str r7, [r6]
-
- /* Program SDRAM Bank Config Register */
- ldr r6, SDCFG
- ldr r7, SDCFG_VAL
- str r7, [r6]
-
- /* Program SDRAM TIM-0 Config Register */
- ldr r6, SDTIM0
- ldr r7, SDTIM0_VAL_162MHz
- str r7, [r6]
-
- /* Program SDRAM TIM-1 Config Register */
- ldr r6, SDTIM1
- ldr r7, SDTIM1_VAL_162MHz
- str r7, [r6]
-
- /* Program the SDRAM Bank Config Control Register */
- ldr r10, MASK_VAL
- ldr r8, SDCFG
- ldr r9, SDCFG_VAL
- and r9, r9, r10
- str r9, [r8]
-
- /* Program SDRAM SDREF Config Register */
- ldr r6, SDREF
- ldr r7, SDREF_VAL
- str r7, [r6]
-
- /*------------------------------------------------------*
- * Issue Soft Reset to DDR Module *
- *------------------------------------------------------*/
-
- /* Issue a Dummy DDR2 read/write */
- ldr r8, DDR2_START_ADDR
- ldr r7, DUMMY_VAL
- str r7, [r8]
- ldr r7, [r8]
-
- /* Shut down the DDR2 LPSC Module */
- ldr r8, PSC_FLAG_CLEAR
- ldr r6, MDCTL_DDR2
- ldr r7, [r6]
- and r7, r7, r8
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Enable the Power Domain Transition Command */
- ldr r6, PTCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Check for Transition Complete(PTSTAT) */
-checkStatClkStop2:
- ldr r6, PTSTAT
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne checkStatClkStop2
-
- /* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkStop2:
- ldr r6, MDSTAT_DDR2
- ldr r7, [r6]
- and r7, r7, $MDSTAT_STATE
- cmp r7, $0x01
- bne checkDDRStatClkStop2
-
- /*------------------------------------------------------*
- * Turn DDR2 Controller Clocks On *
- *------------------------------------------------------*/
-
- /* Enable the DDR2 LPSC Module */
- ldr r6, MDCTL_DDR2
- ldr r7, [r6]
- orr r7, r7, $0x03
- str r7, [r6]
-
- /* Enable the Power Domain Transition Command */
- ldr r6, PTCMD
- ldr r7, [r6]
- orr r7, r7, $0x01
- str r7, [r6]
-
- /* Check for Transition Complete(PTSTAT) */
-checkStatClkEn2:
- ldr r6, PTSTAT
- ldr r7, [r6]
- ands r7, r7, $0x01
- bne checkStatClkEn2
-
- /* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkEn2:
- ldr r6, MDSTAT_DDR2
- ldr r7, [r6]
- and r7, r7, $MDSTAT_STATE
- cmp r7, $0x03
- bne checkDDRStatClkEn2
-
- /* DDR Writes and Reads */
- ldr r6, CFGTEST
- mov r3, $0x01
- str r3, [r6]
-
- /*------------------------------------------------------*
- * System PLL Initialization *
- *------------------------------------------------------*/
-
- /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
- mov r2, $0
- ldr r6, PLL1_CTL
- ldr r7, PLL_CLKSRC_MASK
- ldr r8, [r6]
- and r8, r8, r7
- mov r9, r2, lsl $8
- orr r8, r8, r9
- str r8, [r6]
-
- /* Select the PLLEN source */
- ldr r7, PLL_ENSRC_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Bypass the PLL */
- ldr r7, PLL_BYPASS_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */
- mov r10, $0x20
-
-WaitLoop:
- subs r10, r10, $1
- bne WaitLoop
-
- /* Reset the PLL */
- ldr r7, PLL_RESET_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Disable the PLL */
- orr r8, r8, $0x10
- str r8, [r6]
-
- /* Power up the PLL */
- ldr r7, PLL_PWRUP_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Enable the PLL from Disable Mode */
- ldr r7, PLL_DISABLE_ENABLE_MASK
- and r8, r8, r7
- str r8, [r6]
-
- /* Program the PLL Multiplier */
- ldr r6, PLL1_PLLM
- mov r3, $0x15 /* For 594MHz */
- str r3, [r6]
-
- /* Wait for PLL to Reset Properly */
- mov r10, $0xff
-
-ResetLoop:
- subs r10, r10, $1
- bne ResetLoop
-
- /* Bring PLL out of Reset */
- ldr r6, PLL1_CTL
- orr r8, r8, $0x08
- str r8, [r6]
-
- /* Wait for PLL to Lock */
- ldr r10, PLL_LOCK_COUNT
-
-PLL1Lock:
- subs r10, r10, $1
- bne PLL1Lock
-
- /* Enable the PLL */
- orr r8, r8, $0x01
- str r8, [r6]
-
- nop
- nop
- nop
- nop
-
- /*------------------------------------------------------*
- * AEMIF configuration for NOR Flash (double check) *
- *------------------------------------------------------*/
- ldr r0, _PINMUX0
- ldr r1, _DEV_SETTING
- str r1, [r0]
-
- ldr r0, WAITCFG
- ldr r1, WAITCFG_VAL
- ldr r2, [r0]
- orr r2, r2, r1
- str r2, [r0]
-
- ldr r0, ACFG3
- ldr r1, ACFG3_VAL
- ldr r2, [r0]
- and r1, r2, r1
- str r1, [r0]
-
- ldr r0, ACFG4
- ldr r1, ACFG4_VAL
- ldr r2, [r0]
- and r1, r2, r1
- str r1, [r0]
-
- ldr r0, ACFG5
- ldr r1, ACFG5_VAL
- ldr r2, [r0]
- and r1, r2, r1
- str r1, [r0]
-
- /*--------------------------------------*
- * VTP manual Calibration *
- *--------------------------------------*/
- ldr r0, VTPIOCR
- ldr r1, VTP_MMR0
- str r1, [r0]
-
- ldr r0, VTPIOCR
- ldr r1, VTP_MMR1
- str r1, [r0]
-
- /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */
- ldr r10, VTP_LOCK_COUNT
-VTPLock:
- subs r10, r10, $1
- bne VTPLock
-
- ldr r6, DFT_ENABLE
- mov r10, $0x01
- str r10, [r6]
-
- ldr r6, DDRVTPR
- ldr r7, [r6]
- mov r8, r7, LSL #32-10
- mov r8, r8, LSR #32-10 /* grab low 10 bits */
- ldr r7, VTP_RECAL
- orr r8, r7, r8
- ldr r7, VTP_EN
- orr r8, r7, r8
- str r8, [r0]
-
-
- /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */
- ldr r10, VTP_LOCK_COUNT
-VTP1Lock:
- subs r10, r10, $1
- bne VTP1Lock
-
- ldr r1, [r0]
- ldr r2, VTP_MASK
- and r2, r1, r2
- str r2, [r0]
-
- ldr r6, DFT_ENABLE
- mov r10, $0
- str r10, [r6]
-
- /*
- * Call board-specific lowlevel init.
- * That MUST be present and THAT returns
- * back to arch calling code with "mov pc, lr."
- */
- b dv_board_init
-
-.ltorg
-
-_PINMUX0:
- .word 0x01c40000 /* Device Configuration Registers */
-_PINMUX1:
- .word 0x01c40004 /* Device Configuration Registers */
-
-_DEV_SETTING:
- .word 0x00000c1f
-
-WAITCFG:
- .word 0x01e00004
-WAITCFG_VAL:
- .word 0
-ACFG3:
- .word 0x01e00014
-ACFG3_VAL:
- .word 0x3ffffffd
-ACFG4:
- .word 0x01e00018
-ACFG4_VAL:
- .word 0x3ffffffd
-ACFG5:
- .word 0x01e0001c
-ACFG5_VAL:
- .word 0x3ffffffd
-
-MDCTL_DDR2:
- .word 0x01c41a34
-MDSTAT_DDR2:
- .word 0x01c41834
-
-PTCMD:
- .word 0x01c41120
-PTSTAT:
- .word 0x01c41128
-
-EINT_ENABLE0:
- .word 0x01c48018
-EINT_ENABLE1:
- .word 0x01c4801c
-
-PSC_FLAG_CLEAR:
- .word 0xffffffe0
-PSC_GEM_FLAG_CLEAR:
- .word 0xfffffeff
-
-/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */
-DDRCTL:
- .word 0x200000e4
-DDRCTL_VAL:
- .word 0x50006405
-SDREF:
- .word 0x2000000c
-SDREF_VAL:
- .word 0x000005c3
-SDCFG:
- .word 0x20000008
-SDCFG_VAL:
-#ifdef DDR_4BANKS
- .word 0x00178622
-#elif defined DDR_8BANKS
- .word 0x00178632
-#else
-#error "Unknown DDR configuration!!!"
-#endif
-SDTIM0:
- .word 0x20000010
-SDTIM0_VAL_162MHz:
- .word 0x28923211
-SDTIM1:
- .word 0x20000014
-SDTIM1_VAL_162MHz:
- .word 0x0016c722
-VTPIOCR:
- .word 0x200000f0 /* VTP IO Control register */
-DDRVTPR:
- .word 0x01c42030 /* DDR VPTR MMR */
-VTP_MMR0:
- .word 0x201f
-VTP_MMR1:
- .word 0xa01f
-DFT_ENABLE:
- .word 0x01c4004c
-VTP_LOCK_COUNT:
- .word 0x5b0
-VTP_MASK:
- .word 0xffffdfff
-VTP_RECAL:
- .word 0x08000
-VTP_EN:
- .word 0x02000
-CFGTEST:
- .word 0x80010000
-MASK_VAL:
- .word 0x00000fff
-
-/* GEM Power Up & LPSC Control Register */
-MDCTL_GEM:
- .word 0x01c41a9c
-MDSTAT_GEM:
- .word 0x01c4189c
-
-/* For WDT reset chip bug */
-P1394:
- .word 0x01c41a20
-
-PLL_CLKSRC_MASK:
- .word 0xfffffeff /* Mask the Clock Mode bit */
-PLL_ENSRC_MASK:
- .word 0xffffffdf /* Select the PLLEN source */
-PLL_BYPASS_MASK:
- .word 0xfffffffe /* Put the PLL in BYPASS */
-PLL_RESET_MASK:
- .word 0xfffffff7 /* Put the PLL in Reset Mode */
-PLL_PWRUP_MASK:
- .word 0xfffffffd /* PLL Power up Mask Bit */
-PLL_DISABLE_ENABLE_MASK:
- .word 0xffffffef /* Enable the PLL from Disable */
-PLL_LOCK_COUNT:
- .word 0x2000
-
-/* PLL1-SYSTEM PLL MMRs */
-PLL1_CTL:
- .word 0x01c40900
-PLL1_PLLM:
- .word 0x01c40910
-
-/* PLL2-SYSTEM PLL MMRs */
-PLL2_CTL:
- .word 0x01c40d00
-PLL2_PLLM:
- .word 0x01c40d10
-PLL2_DIV1:
- .word 0x01c40d18
-PLL2_DIV2:
- .word 0x01c40d1c
-PLL2_PLLCMD:
- .word 0x01c40d38
-PLL2_PLLSTAT:
- .word 0x01c40d3c
-PLL2_DIV_MASK:
- .word 0xffff7fff
-
-MMARG_BRF0:
- .word 0x01c42010 /* BRF margin mode 0 (R/W)*/
-MMARG_BRF0_VAL:
- .word 0x00444400
-
-DDR2_START_ADDR:
- .word 0x80000000
-DUMMY_VAL:
- .word 0xa55aa55a
-#else /* CONFIG_SOC_DM644X */
- mov pc, lr
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/lxt972.c b/arch/arm/cpu/arm926ejs/davinci/lxt972.c
deleted file mode 100644
index c482fd9..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/lxt972.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Intel LXT971/LXT972 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-#include <miiphy.h>
-#include <lxt971a.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-int lxt972_is_phy_connected(int phy_addr)
-{
- u_int16_t id1, id2;
-
- if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1))
- return(0);
- if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2))
- return(0);
-
- if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
- return(1);
-
- return(0);
-}
-
-int lxt972_get_link_speed(int phy_addr)
-{
- u_int16_t stat1, tmp;
- volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
-
- if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
- return(0);
-
- if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */
- return(0);
-
- if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
- return(0);
-
- tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
-
- davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
- /* Read back */
- if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
- return(0);
-
- /* Speed doesn't matter, there is no setting for it in EMAC... */
- if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
- /* set DM644x EMAC for Full Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
- EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
- } else {
- /*set DM644x EMAC for Half Duplex */
- emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
- }
-
- return(1);
-}
-
-
-int lxt972_init_phy(int phy_addr)
-{
- int ret = 1;
-
- if (!lxt972_get_link_speed(phy_addr)) {
- /* Try another time */
- ret = lxt972_get_link_speed(phy_addr);
- }
-
- /* Disable PHY Interrupts */
- davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
-
- return(ret);
-}
-
-
-int lxt972_auto_negotiate(int phy_addr)
-{
- u_int16_t tmp;
-
- if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
- return(0);
-
- /* Restart Auto_negotiation */
- tmp |= BMCR_ANRESTART;
- davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
-
- /*check AutoNegotiate complete */
- udelay (10000);
- if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
- return(0);
-
- if (!(tmp & BMSR_ANEGCOMPLETE))
- return(0);
-
- return (lxt972_get_link_speed(phy_addr));
-}
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm926ejs/davinci/misc.c b/arch/arm/cpu/arm926ejs/davinci/misc.c
deleted file mode 100644
index e18bdfc..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/misc.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Miscelaneous DaVinci functions.
- *
- * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SPL_BUILD
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size(
- (void *)CONFIG_SYS_SDRAM_BASE,
- CONFIG_MAX_RAM_BANK_SIZE);
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
- gd->bd->bi_dram[0].size = gd->ram_size;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-/*
- * Read ethernet MAC address from EEPROM for DVEVM compatible boards.
- * Returns 1 if found, 0 otherwise.
- */
-int dvevm_read_mac_address(uint8_t *buf)
-{
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
- /* Read MAC address. */
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &buf[0], 6))
- goto i2cerr;
-
- /* Check that MAC address is valid. */
- if (!is_valid_ether_addr(buf))
- goto err;
-
- return 1; /* Found */
-
-i2cerr:
- printf("Read from EEPROM @ 0x%02x failed\n",
- CONFIG_SYS_I2C_EEPROM_ADDR);
-err:
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
-
- return 0;
-}
-
-/*
- * Set the mii mode as MII or RMII
- */
-#if defined(CONFIG_SOC_DA8XX)
-void davinci_emac_mii_mode_sel(int mode_sel)
-{
- int val;
-
- val = readl(&davinci_syscfg_regs->cfgchip3);
- if (mode_sel == 0)
- val &= ~(1 << 8);
- else
- val |= (1 << 8);
- writel(val, &davinci_syscfg_regs->cfgchip3);
-}
-#endif
-/*
- * If there is no MAC address in the environment, then it will be initialized
- * (silently) from the value in the EEPROM.
- */
-void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
-{
- uint8_t env_enetaddr[6];
- int ret;
-
- ret = eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr);
- if (!ret) {
- /*
- * There is no MAC address in the environment, so we
- * initialize it from the value in the EEPROM.
- */
- debug("### Setting environment from EEPROM MAC address = "
- "\"%pM\"\n",
- env_enetaddr);
- ret = !eth_setenv_enetaddr("ethaddr", rom_enetaddr);
- }
- if (!ret)
- printf("Failed to set mac address from EEPROM: %d\n", ret);
-}
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
-#if defined(CONFIG_SOC_DA8XX)
-#ifndef CONFIG_USE_IRQ
-void irq_init(void)
-{
- /*
- * Mask all IRQs by clearing the global enable and setting
- * the enable clear for all the 90 interrupts.
- */
- writel(0, &davinci_aintc_regs->ger);
-
- writel(0, &davinci_aintc_regs->hier);
-
- writel(0xffffffff, &davinci_aintc_regs->ecr1);
- writel(0xffffffff, &davinci_aintc_regs->ecr2);
- writel(0xffffffff, &davinci_aintc_regs->ecr3);
-}
-#endif
-
-/*
- * Enable PSC for various peripherals.
- */
-int da8xx_configure_lpsc_items(const struct lpsc_resource *item,
- const int n_items)
-{
- int i;
-
- for (i = 0; i < n_items; i++)
- lpsc_on(item[i].lpsc_no);
-
- return 0;
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/pinmux.c b/arch/arm/cpu/arm926ejs/davinci/pinmux.c
deleted file mode 100644
index e9d8c87..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/pinmux.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * DaVinci pinmux functions.
- *
- * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-
-/*
- * Change the setting of a pin multiplexer field.
- *
- * Takes an array of pinmux settings similar to:
- *
- * struct pinmux_config uart_pins[] = {
- * { &davinci_syscfg_regs->pinmux[8], 2, 7 },
- * { &davinci_syscfg_regs->pinmux[9], 2, 0 }
- * };
- *
- * Stepping through the array, each pinmux[n] register has the given value
- * set in the pin mux field specified.
- *
- * The number of pins in the array must be passed (ARRAY_SIZE can provide
- * this value conveniently).
- *
- * Returns 0 if all field numbers and values are in the correct range,
- * else returns -1.
- */
-int davinci_configure_pin_mux(const struct pinmux_config *pins,
- const int n_pins)
-{
- int i;
-
- /* check for invalid pinmux values */
- for (i = 0; i < n_pins; i++) {
- if (pins[i].field >= PIN_MUX_NUM_FIELDS ||
- (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0)
- return -1;
- }
-
- /* configure the pinmuxes */
- for (i = 0; i < n_pins; i++) {
- const int offset = pins[i].field * PIN_MUX_FIELD_SIZE;
- const unsigned int value = pins[i].value << offset;
- const unsigned int mask = PIN_MUX_FIELD_MASK << offset;
- const dv_reg *mux = pins[i].mux;
-
- writel(value | (readl(mux) & (~mask)), mux);
- }
-
- return 0;
-}
-
-/*
- * Configure multiple pinmux resources.
- *
- * Takes an pinmux_resource array of pinmux_config and pin counts:
- *
- * const struct pinmux_resource pinmuxes[] = {
- * PINMUX_ITEM(uart_pins),
- * PINMUX_ITEM(i2c_pins),
- * };
- *
- * The number of items in the array must be passed (ARRAY_SIZE can provide
- * this value conveniently).
- *
- * Each item entry is configured in the defined order. If configuration
- * of any item fails, -1 is returned and none of the following items are
- * configured. On success, 0 is returned.
- */
-int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
- const int n_items)
-{
- int i;
-
- for (i = 0; i < n_items; i++) {
- if (davinci_configure_pin_mux(item[i].pins,
- item[i].n_pins) != 0)
- return -1;
- }
-
- return 0;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/psc.c b/arch/arm/cpu/arm926ejs/davinci/psc.c
deleted file mode 100644
index 8d99e2e..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/psc.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Power and Sleep Controller (PSC) functions.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-/*
- * The PSC manages three inputs to a "module" which may be a peripheral or
- * CPU. Those inputs are the module's: clock; reset signal; and sometimes
- * its power domain. For our purposes, we only care whether clock and power
- * are active, and the module is out of reset.
- *
- * DaVinci chips may include two separate power domains: "Always On" and "DSP".
- * Chips without a DSP generally have only one domain.
- *
- * The "Always On" power domain is always on when the chip is on, and is
- * powered by the VDD pins (on DM644X). The majority of DaVinci modules
- * lie within the "Always On" power domain.
- *
- * A separate domain called the "DSP" domain houses the C64x+ and other video
- * hardware such as VICP. In some chips, the "DSP" domain is not always on.
- * The "DSP" power domain is powered by the CVDDDSP pins (on DM644X).
- */
-
-/* Works on Always On power domain only (no PD argument) */
-static void lpsc_transition(unsigned int id, unsigned int state)
-{
- dv_reg_p mdstat, mdctl, ptstat, ptcmd;
-#ifdef CONFIG_SOC_DA8XX
- struct davinci_psc_regs *psc_regs;
-#endif
-
-#ifndef CONFIG_SOC_DA8XX
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
- ptstat = REG_P(PSC_PTSTAT);
- ptcmd = REG_P(PSC_PTCMD);
-#else
- if (id < DAVINCI_LPSC_PSC1_BASE) {
- if (id >= PSC_PSC0_MODULE_ID_CNT)
- return;
- psc_regs = davinci_psc0_regs;
- mdstat = &psc_regs->psc0.mdstat[id];
- mdctl = &psc_regs->psc0.mdctl[id];
- } else {
- id -= DAVINCI_LPSC_PSC1_BASE;
- if (id >= PSC_PSC1_MODULE_ID_CNT)
- return;
- psc_regs = davinci_psc1_regs;
- mdstat = &psc_regs->psc1.mdstat[id];
- mdctl = &psc_regs->psc1.mdctl[id];
- }
- ptstat = &psc_regs->ptstat;
- ptcmd = &psc_regs->ptcmd;
-#endif
-
- while (readl(ptstat) & 0x01)
- continue;
-
- if ((readl(mdstat) & PSC_MDSTAT_STATE) == state)
- return; /* Already in that state */
-
- writel((readl(mdctl) & ~PSC_MDCTL_NEXT) | state, mdctl);
-
- switch (id) {
-#ifdef CONFIG_SOC_DM644X
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- case DAVINCI_LPSC_VPSSSLV:
- case DAVINCI_LPSC_EMAC:
- case DAVINCI_LPSC_EMAC_WRAPPER:
- case DAVINCI_LPSC_MDIO:
- case DAVINCI_LPSC_USB:
- case DAVINCI_LPSC_ATA:
- case DAVINCI_LPSC_VLYNQ:
- case DAVINCI_LPSC_UHPI:
- case DAVINCI_LPSC_DDR_EMIF:
- case DAVINCI_LPSC_AEMIF:
- case DAVINCI_LPSC_MMC_SD:
- case DAVINCI_LPSC_MEMSTICK:
- case DAVINCI_LPSC_McBSP:
- case DAVINCI_LPSC_GPIO:
- writel(readl(mdctl) | 0x200, mdctl);
- break;
-#endif
- }
-
- writel(0x01, ptcmd);
-
- while (readl(ptstat) & 0x01)
- continue;
- while ((readl(mdstat) & PSC_MDSTAT_STATE) != state)
- continue;
-}
-
-void lpsc_on(unsigned int id)
-{
- lpsc_transition(id, 0x03);
-}
-
-void lpsc_syncreset(unsigned int id)
-{
- lpsc_transition(id, 0x01);
-}
-
-void lpsc_disable(unsigned int id)
-{
- lpsc_transition(id, 0x0);
-}
-
-/* Not all DaVinci chips have a DSP power domain. */
-#ifdef CONFIG_SOC_DM644X
-
-/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-#endif /* have a DSP */
diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.c b/arch/arm/cpu/arm926ejs/davinci/reset.c
deleted file mode 100644
index 6b0f154..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/reset.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Processor reset using WDT.
- *
- * Copyright (C) 2012 Dmitry Bondar <bond@inmys.ru>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/timer_defs.h>
-#include <asm/arch/hardware.h>
-
-void reset_cpu(unsigned long a)
-{
- struct davinci_timer *const wdttimer =
- (struct davinci_timer *)DAVINCI_WDOG_BASE;
- writel(0x08, &wdttimer->tgcr);
- writel(readl(&wdttimer->tgcr) | 0x03, &wdttimer->tgcr);
- writel(0, &wdttimer->tim12);
- writel(0, &wdttimer->tim34);
- writel(0, &wdttimer->prd12);
- writel(0, &wdttimer->prd34);
- writel(readl(&wdttimer->tcr) | 0x40, &wdttimer->tcr);
- writel(readl(&wdttimer->wdtcr) | 0x4000, &wdttimer->wdtcr);
- writel(0xa5c64000, &wdttimer->wdtcr);
- writel(0xda7e4000, &wdttimer->wdtcr);
- writel(0x4000, &wdttimer->wdtcr);
- while (1)
- /*nothing*/;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c
deleted file mode 100644
index 49349da..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/spl.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <config.h>
-#include <spl.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <nand.h>
-#include <asm/arch/dm365_lowlevel.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <spi_flash.h>
-#include <mmc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SPL_LIBCOMMON_SUPPORT
-void puts(const char *str)
-{
- while (*str)
- putc(*str++);
-}
-
-void putc(char c)
-{
- if (c == '\n')
- NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), '\r');
-
- NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), c);
-}
-#endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */
-
-void spl_board_init(void)
-{
-#ifdef CONFIG_SOC_DM365
- dm36x_lowlevel_init(0);
-#endif
-#ifdef CONFIG_SOC_DA8XX
- arch_cpu_init();
-#endif
- preloader_console_init();
-}
-
-u32 spl_boot_mode(void)
-{
- return MMCSD_MODE_RAW;
-}
-
-u32 spl_boot_device(void)
-{
-#ifdef CONFIG_SPL_NAND_SIMPLE
- return BOOT_DEVICE_NAND;
-#elif defined(CONFIG_SPL_SPI_LOAD)
- return BOOT_DEVICE_SPI;
-#elif defined(CONFIG_SPL_MMC_LOAD)
- return BOOT_DEVICE_MMC1;
-#else
- puts("Unknown boot device\n");
- hang();
-#endif
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/cpu/arm926ejs/davinci/timer.c
deleted file mode 100644
index c7d0652..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/timer.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments <www.ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002-2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/timer_defs.h>
-#include <div64.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct davinci_timer * const timer =
- (struct davinci_timer *)CONFIG_SYS_TIMERBASE;
-
-#define TIMER_LOAD_VAL 0xffffffff
-
-#define TIM_CLK_DIV 16
-
-int timer_init(void)
-{
- /* We are using timer34 in unchained 32-bit mode, full speed */
- writel(0x0, &timer->tcr);
- writel(0x0, &timer->tgcr);
- writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr);
- writel(0x0, &timer->tim34);
- writel(TIMER_LOAD_VAL, &timer->prd34);
- writel(2 << 22, &timer->tcr);
- gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV;
- gd->arch.timer_reset_value = 0;
-
- return(0);
-}
-
-/*
- * Get the current 64 bit timer tick count
- */
-unsigned long long get_ticks(void)
-{
- unsigned long now = readl(&timer->tim34);
-
- /* increment tbu if tbl has rolled over */
- if (now < gd->arch.tbl)
- gd->arch.tbu++;
- gd->arch.tbl = now;
-
- return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
-}
-
-ulong get_timer(ulong base)
-{
- unsigned long long timer_diff;
-
- timer_diff = get_ticks() - gd->arch.timer_reset_value;
-
- return lldiv(timer_diff,
- (gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) - base;
-}
-
-void __udelay(unsigned long usec)
-{
- unsigned long long endtime;
-
- endtime = lldiv((unsigned long long)usec * gd->arch.timer_rate_hz,
- 1000000UL);
- endtime += get_ticks();
-
- while (get_ticks() < endtime)
- ;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return gd->arch.timer_rate_hz;
-}
-
-#ifdef CONFIG_HW_WATCHDOG
-static struct davinci_timer * const wdttimer =
- (struct davinci_timer *)CONFIG_SYS_WDTTIMERBASE;
-
-/*
- * See prufw2.pdf for using Timer as a WDT
- */
-void davinci_hw_watchdog_enable(void)
-{
- writel(0x0, &wdttimer->tcr);
- writel(0x0, &wdttimer->tgcr);
- /* TIMMODE = 2h */
- writel(0x08 | 0x03 | ((TIM_CLK_DIV - 1) << 8), &wdttimer->tgcr);
- writel(CONFIG_SYS_WDT_PERIOD_LOW, &wdttimer->prd12);
- writel(CONFIG_SYS_WDT_PERIOD_HIGH, &wdttimer->prd34);
- writel(2 << 22, &wdttimer->tcr);
- writel(0x0, &wdttimer->tim12);
- writel(0x0, &wdttimer->tim34);
- /* set WDEN bit, WDKEY 0xa5c6 */
- writel(0xa5c64000, &wdttimer->wdtcr);
- /* clear counter register */
- writel(0xda7e4000, &wdttimer->wdtcr);
-}
-
-void davinci_hw_watchdog_reset(void)
-{
- writel(0xa5c64000, &wdttimer->wdtcr);
- writel(0xda7e4000, &wdttimer->wdtcr);
-}
-#endif