arm: spear: Move to common SPL infrastructure

The SPL implementation for SPEAr600 is older than the common SPL
infrastructure. This patch now moves the SPEAr600 SPL over to the
common SPL code.

Tested on the only SPEAr board that currently uses SPL in mainline
U-Boot, the x600.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vipin Kumar <vk.vipin@gmail.com>

1 files changed, 0 insertions, 181 deletions

diff --git a/arch/arm/cpu/arm926ejs/spear/spl_boot.c b/arch/arm/cpu/arm926ejs/spear/spl_boot.c
deleted file mode 100644
index c846d75..0000000
--- a/arch/arm/cpu/arm926ejs/spear/spl_boot.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * (C) Copyright 2000-2009
- * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
- *
- * Copyright (C) 2012 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <image.h>
-#include <linux/compiler.h>
-#include <asm/io.h>
-#include <asm/arch/spr_defs.h>
-#include <linux/mtd/st_smi.h>
-
-static const char kernel_name[] = "Linux";
-static const char loader_name[] = "U-Boot";
-
-int image_check_header(image_header_t *hdr, const char *name)
-{
-	if (image_check_magic(hdr) &&
-	    (!strncmp(image_get_name(hdr), name, strlen(name))) &&
-	    image_check_hcrc(hdr)) {
-		return 1;
-	}
-	return 0;
-}
-
-int image_check_data(image_header_t *hdr)
-{
-	if (image_check_dcrc(hdr))
-		return 1;
-
-	return 0;
-}
-
-/*
- * SNOR (Serial NOR flash) related functions
- */
-void snor_init(void)
-{
-	struct smi_regs *const smicntl =
-		(struct smi_regs * const)CONFIG_SYS_SMI_BASE;
-
-	/* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */
-	writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4,
-	       &smicntl->smi_cr1);
-}
-
-static int snor_image_load(u8 *load_addr, void (**image_p)(void),
-			   const char *image_name)
-{
-	image_header_t *header;
-
-	/*
-	 * Since calculating the crc in the SNOR flash does not
-	 * work, we copy the image to the destination address
-	 * minus the header size. And point the header to this
-	 * new destination. This will not work for address 0
-	 * of course.
-	 */
-	header = (image_header_t *)load_addr;
-	memcpy((ulong *)(image_get_load(header) - sizeof(image_header_t)),
-	       (const ulong *)load_addr,
-	       image_get_data_size(header) + sizeof(image_header_t));
-	header = (image_header_t *)(image_get_load(header) -
-				    sizeof(image_header_t));
-
-	if (image_check_header(header, image_name)) {
-		if (image_check_data(header)) {
-			/* Jump to boot image */
-			*image_p = (void *)image_get_load(header);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static void boot_image(void (*image)(void))
-{
-	void (*funcp)(void) __noreturn = (void *)image;
-
-	(*funcp)();
-}
-
-/*
- * spl_boot:
- *
- * All supported booting types of all supported SoCs are listed here.
- * Generic readback APIs are provided for each supported booting type
- * eg. nand_read_skip_bad
- */
-u32 spl_boot(void)
-{
-	void (*image)(void);
-
-#ifdef CONFIG_SPEAR_USBTTY
-	plat_late_init();
-	return 1;
-#endif
-
-	/*
-	 * All the supported booting devices are listed here. Each of
-	 * the booting type supported by the platform would define the
-	 * macro xxx_BOOT_SUPPORTED to true.
-	 */
-
-	if (SNOR_BOOT_SUPPORTED && snor_boot_selected()) {
-		/* SNOR-SMI initialization */
-		snor_init();
-
-		serial_puts("Booting via SNOR\n");
-		/* Serial NOR booting */
-		if (1 == snor_image_load((u8 *)CONFIG_SYS_UBOOT_BASE,
-					    &image, loader_name)) {
-			/* Platform related late initialasations */
-			plat_late_init();
-
-			/* Jump to boot image */
-			serial_puts("Jumping to U-Boot\n");
-			boot_image(image);
-			return 1;
-		}
-	}
-
-	if (NAND_BOOT_SUPPORTED && nand_boot_selected()) {
-		/* NAND booting */
-		/* Not ported from XLoader to SPL yet */
-		return 0;
-	}
-
-	if (PNOR_BOOT_SUPPORTED && pnor_boot_selected()) {
-		/* PNOR booting */
-		/* Not ported from XLoader to SPL yet */
-		return 0;
-	}
-
-	if (MMC_BOOT_SUPPORTED && mmc_boot_selected()) {
-		/* MMC booting */
-		/* Not ported from XLoader to SPL yet */
-		return 0;
-	}
-
-	if (SPI_BOOT_SUPPORTED && spi_boot_selected()) {
-		/* SPI booting */
-		/* Not supported for any platform as of now */
-		return 0;
-	}
-
-	if (I2C_BOOT_SUPPORTED && i2c_boot_selected()) {
-		/* I2C booting */
-		/* Not supported for any platform as of now */
-		return 0;
-	}
-
-	/*
-	 * All booting types without memory are listed as below
-	 * Control has to be returned to BootROM in case of all
-	 * the following booting scenarios
-	 */
-
-	if (USB_BOOT_SUPPORTED && usb_boot_selected()) {
-		plat_late_init();
-		return 1;
-	}
-
-	if (TFTP_BOOT_SUPPORTED && tftp_boot_selected()) {
-		plat_late_init();
-		return 1;
-	}
-
-	if (UART_BOOT_SUPPORTED && uart_boot_selected()) {
-		plat_late_init();
-		return 1;
-	}
-
-	/* Ideally, the control should not reach here. */
-	hang();
-}