diff options
author | Tom Rini <trini@ti.com> | 2015-02-10 10:40:43 -0500 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2015-02-10 10:40:43 -0500 |
commit | 307367eaffc8638e10ba1784fc66bfe623ae79e2 (patch) | |
tree | 087641ed4c29320f8759cda28e377e36ff82cb78 /arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | |
parent | a4fb5df214c7e8d5bc949c1068d92252f105427a (diff) | |
parent | aee0013e53b339a573e2a8d66062fe87765aa3bd (diff) | |
download | u-boot-imx-307367eaffc8638e10ba1784fc66bfe623ae79e2.zip u-boot-imx-307367eaffc8638e10ba1784fc66bfe623ae79e2.tar.gz u-boot-imx-307367eaffc8638e10ba1784fc66bfe623ae79e2.tar.bz2 |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Diffstat (limited to 'arch/arm/cpu/arm926ejs/mxs/spl_power_init.c')
-rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 110 |
1 files changed, 105 insertions, 5 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 1c54ab7..c342217 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -14,6 +14,13 @@ #include "mxs_init.h" +#ifdef CONFIG_SYS_MXS_VDD5V_ONLY +#define DCDC4P2_DROPOUT_CONFIG POWER_DCDC4P2_DROPOUT_CTRL_100MV | \ + POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 +#else +#define DCDC4P2_DROPOUT_CONFIG POWER_DCDC4P2_DROPOUT_CTRL_100MV | \ + POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL +#endif /** * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL * @@ -26,6 +33,8 @@ static void mxs_power_clock2xtal(void) struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + debug("SPL: Switching CPU clock to 24MHz XTAL\n"); + /* Set XTAL as CPU reference clock */ writel(CLKCTRL_CLKSEQ_BYPASS_CPU, &clkctrl_regs->hw_clkctrl_clkseq_set); @@ -43,9 +52,23 @@ static void mxs_power_clock2pll(void) struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + debug("SPL: Switching CPU core clock source to PLL\n"); + + /* + * TODO: Are we really? It looks like we turn on PLL0, but we then + * set the CLKCTRL_CLKSEQ_BYPASS_CPU bit of the (which was already + * set by mxs_power_clock2xtal()). Clearing this bit here seems to + * introduce some instability (causing the CPU core to hang). Maybe + * we aren't giving PLL0 enough time to stabilise? + */ setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0, CLKCTRL_PLL0CTRL0_POWER); early_delay(100); + + /* + * TODO: Should the PLL0 FORCE_LOCK bit be set here followed be a + * wait on the PLL0 LOCK bit? + */ setbits_le32(&clkctrl_regs->hw_clkctrl_clkseq, CLKCTRL_CLKSEQ_BYPASS_CPU); } @@ -62,6 +85,8 @@ static void mxs_power_set_auto_restart(void) struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE; + debug("SPL: Setting auto-restart bit\n"); + writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr); while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST) ; @@ -101,14 +126,17 @@ static void mxs_power_set_linreg(void) (struct mxs_power_regs *)MXS_POWER_BASE; /* Set linear regulator 25mV below switching converter */ + debug("SPL: Setting VDDD 25mV below DC-DC converters\n"); clrsetbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_LINREG_OFFSET_MASK, POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); + debug("SPL: Setting VDDA 25mV below DC-DC converters\n"); clrsetbits_le32(&power_regs->hw_power_vddactrl, POWER_VDDACTRL_LINREG_OFFSET_MASK, POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW); + debug("SPL: Setting VDDIO 25mV below DC-DC converters\n"); clrsetbits_le32(&power_regs->hw_power_vddioctrl, POWER_VDDIOCTRL_LINREG_OFFSET_MASK, POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); @@ -127,6 +155,8 @@ static int mxs_get_batt_volt(void) volt &= POWER_BATTMONITOR_BATT_VAL_MASK; volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; volt *= 8; + + debug("SPL: Battery Voltage = %dmV\n", volt); return volt; } @@ -154,8 +184,10 @@ static int mxs_is_batt_good(void) (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t volt = mxs_get_batt_volt(); - if ((volt >= 2400) && (volt <= 4300)) + if ((volt >= 2400) && (volt <= 4300)) { + debug("SPL: Battery is good\n"); return 1; + } clrsetbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, @@ -175,16 +207,21 @@ static int mxs_is_batt_good(void) volt = mxs_get_batt_volt(); - if (volt >= 3500) + if (volt >= 3500) { + debug("SPL: Battery Voltage too high\n"); return 0; + } - if (volt >= 2400) + if (volt >= 2400) { + debug("SPL: Battery is good\n"); return 1; + } writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, &power_regs->hw_power_charge_clr); writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set); + debug("SPL: Battery Voltage too low\n"); return 0; } @@ -203,6 +240,7 @@ static void mxs_power_setup_5v_detect(void) (struct mxs_power_regs *)MXS_POWER_BASE; /* Start 5V detection */ + debug("SPL: Starting 5V input detection comparator\n"); clrsetbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_VBUSVALID_TRSH_MASK, POWER_5VCTRL_VBUSVALID_TRSH_4V4 | @@ -220,6 +258,8 @@ static void mxs_src_power_init(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Pre-Configuring power block\n"); + /* Improve efficieny and reduce transient ripple */ writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST | POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set); @@ -257,6 +297,8 @@ static void mxs_power_init_4p2_params(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Configuring common 4P2 regulator params\n"); + /* Setup 4P2 parameters */ clrsetbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK, @@ -268,8 +310,7 @@ static void mxs_power_init_4p2_params(void) clrsetbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_DROPOUT_CTRL_MASK, - POWER_DCDC4P2_DROPOUT_CTRL_100MV | - POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL); + DCDC4P2_DROPOUT_CONFIG); clrsetbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, @@ -289,6 +330,8 @@ static void mxs_enable_4p2_dcdc_input(int xfer) uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo; uint32_t prev_5v_brnout, prev_5v_droop; + debug("SPL: %s 4P2 DC-DC Input\n", xfer ? "Enabling" : "Disabling"); + prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) & POWER_5VCTRL_PWDN_5VBRNOUT; prev_5v_droop = readl(&power_regs->hw_power_ctrl) & @@ -390,6 +433,8 @@ static void mxs_power_init_4p2_regulator(void) (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp, tmp2; + debug("SPL: Enabling 4P2 regulator\n"); + setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2); writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set); @@ -407,6 +452,7 @@ static void mxs_power_init_4p2_regulator(void) * gradually to avoid large inrush current from the 5V cable which can * cause transients/problems */ + debug("SPL: Charging 4P2 capacitor\n"); mxs_enable_4p2_dcdc_input(0); if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { @@ -420,6 +466,8 @@ static void mxs_power_init_4p2_regulator(void) POWER_DCDC4P2_ENABLE_DCDC); writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, &power_regs->hw_power_5vctrl_set); + + debug("SPL: Unable to recover from mx23 errata 5837\n"); hang(); } @@ -433,6 +481,7 @@ static void mxs_power_init_4p2_regulator(void) * current limit until the brownout status is false or until we've * reached our maximum defined 4p2 current limit. */ + debug("SPL: Setting 4P2 brownout level\n"); clrsetbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK, 22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */ @@ -479,8 +528,11 @@ static void mxs_power_init_dcdc_4p2_source(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Switching DC-DC converters to 4P2\n"); + if (!(readl(&power_regs->hw_power_dcdc4p2) & POWER_DCDC4P2_ENABLE_DCDC)) { + debug("SPL: Already switched - aborting\n"); hang(); } @@ -509,6 +561,8 @@ static void mxs_power_enable_4p2(void) uint32_t vdddctrl, vddactrl, vddioctrl; uint32_t tmp; + debug("SPL: Powering up 4P2 regulator\n"); + vdddctrl = readl(&power_regs->hw_power_vdddctrl); vddactrl = readl(&power_regs->hw_power_vddactrl); vddioctrl = readl(&power_regs->hw_power_vddioctrl); @@ -559,6 +613,8 @@ static void mxs_power_enable_4p2(void) if (tmp) writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_clr); + + debug("SPL: 4P2 regulator powered-up\n"); } /** @@ -574,6 +630,8 @@ static void mxs_boot_valid_5v(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Booting from 5V supply\n"); + /* * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V * disconnect event. FIXME @@ -601,6 +659,9 @@ static void mxs_powerdown(void) { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + + debug("Powering Down\n"); + writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset); writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, &power_regs->hw_power_reset); @@ -617,6 +678,8 @@ static void mxs_batt_boot(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Configuring power block to boot from battery\n"); + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT); clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC); @@ -672,6 +735,8 @@ static void mxs_handle_5v_conflict(void) (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp; + debug("SPL: Resolving 5V conflict\n"); + setbits_le32(&power_regs->hw_power_vddioctrl, POWER_VDDIOCTRL_BO_OFFSET_MASK); @@ -683,19 +748,27 @@ static void mxs_handle_5v_conflict(void) * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes * unreliable */ + debug("SPL: VDDIO has a brownout\n"); mxs_powerdown(); break; } if (tmp & POWER_STS_VDD5V_GT_VDDIO) { + debug("SPL: POWER_STS_VDD5V_GT_VDDIO is set\n"); mxs_boot_valid_5v(); break; } else { + debug("SPL: POWER_STS_VDD5V_GT_VDDIO is not set\n"); mxs_powerdown(); break; } + /* + * TODO: I can't see this being reached. We'll either + * powerdown or boot from a stable 5V supply. + */ if (tmp & POWER_STS_PSWITCH_MASK) { + debug("SPL: POWER_STS_PSWITCH_MASK is set\n"); mxs_batt_boot(); break; } @@ -713,21 +786,26 @@ static void mxs_5v_boot(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Configuring power block to boot from 5V input\n"); + /* * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID, * but their implementation always returns 1 so we omit it here. */ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + debug("SPL: 5V VDD good\n"); mxs_boot_valid_5v(); return; } early_delay(1000); if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + debug("SPL: 5V VDD good (after delay)\n"); mxs_boot_valid_5v(); return; } + debug("SPL: 5V VDD not good\n"); mxs_handle_5v_conflict(); } @@ -742,6 +820,8 @@ static void mxs_init_batt_bo(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Initialising battery brown-out level to 3.0V\n"); + /* Brownout at 3V */ clrsetbits_le32(&power_regs->hw_power_battmonitor, POWER_BATTMONITOR_BRWNOUT_LVL_MASK, @@ -762,6 +842,8 @@ static void mxs_switch_vddd_to_dcdc_source(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Switching VDDD to DC-DC converters\n"); + clrsetbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_LINREG_OFFSET_MASK, POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); @@ -788,6 +870,8 @@ static void mxs_power_configure_power_source(void) struct mxs_lradc_regs *lradc_regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; + debug("SPL: Configuring power source\n"); + mxs_src_power_init(); if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { @@ -811,6 +895,10 @@ static void mxs_power_configure_power_source(void) mxs_batt_boot(); } + /* + * TODO: Do not switch CPU clock to PLL if we are VDD5V is sourced + * from USB VBUS + */ mxs_power_clock2pll(); mxs_init_batt_bo(); @@ -819,6 +907,7 @@ static void mxs_power_configure_power_source(void) #ifdef CONFIG_MX23 /* Fire up the VDDMEM LinReg now that we're all set. */ + debug("SPL: Enabling mx23 VDDMEM linear regulator\n"); writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT, &power_regs->hw_power_vddmemctrl); #endif @@ -838,6 +927,8 @@ static void mxs_enable_output_rail_protection(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Enabling output rail protection\n"); + writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr); @@ -1077,6 +1168,8 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, */ static void mxs_setup_batt_detect(void) { + debug("SPL: Starting battery voltage measurement logic\n"); + mxs_lradc_init(); mxs_lradc_enable_batt_measurement(); early_delay(10); @@ -1111,6 +1204,8 @@ void mxs_power_init(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Initialising Power Block\n"); + mxs_ungate_power(); mxs_power_clock2xtal(); @@ -1123,9 +1218,13 @@ void mxs_power_init(void) mxs_power_configure_power_source(); mxs_enable_output_rail_protection(); + debug("SPL: Setting VDDIO to 3V3 (brownout @ 3v15)\n"); mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150); + + debug("SPL: Setting VDDD to 1V5 (brownout @ 1v0)\n"); mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000); #ifdef CONFIG_MX23 + debug("SPL: Setting mx23 VDDMEM to 2V5 (brownout @ 1v7)\n"); mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700); #endif writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | @@ -1150,6 +1249,7 @@ void mxs_power_wait_pswitch(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Waiting for power switch input\n"); while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK)) ; } |