Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  drivers/rtc: add Marvell Integrated RTC
  Armada100: Add Board Support for Marvell GuruPlug-Display
  Armada100: MFP macro naming correction
  arm: auto gen asm-offsets.h for mb86r0x
  spear: fix build errors for spear3xx/spear600 platforms
  cosmetic: arm: lib/board.c: Coding Style cleanup
  ARM: versatile: fix board support
  SMDKV310: Enable device tree support
  SMDKV310: MMC_SPL: Fix building when using "make O="
  arm: a320: enable tagged list support
  arm: a320: fix multiline comment style
  ARMv7: u8500_href: Add missing header to fix compiler warning
  Removed unused define, CONFIG_ARMV7.
  avr32: add grasshopper (ICnova AP7000) board
  AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings
  MAKEALL: remove AT91 boards that are in boards.cfg
  AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master
  AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master
  AT91: Board fix for AT91SAM9261-EK
  AT91: SoC fix at91sam9261_matrix.h
  AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
  AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master
  AT91: change common at91sam9261 files to compile with new scheme
  AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
  a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
  README: fix arm920t/at91 path
  net/eth.c: drop obsolete at91rm9200 support
  README.at91-soc: remove AT91(RM9200) joining notice
  a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
  MAKEALL: remove obsolete at91rm9200 soc
  ARM: remove obsolete at91rm9200
  omap4: clock init support for omap4460
  omap4: support TPS programming
  omap: reuse omap3 gpio support in omap4
  omap4: sdram init changes for omap4460
  omap4: add omap4460 revision detection
  mkimage: Add OMAP boot image support
  omap: add MMC and FAT support to SPL
  omap: add basic SPL support
  armv7: start.S: fixes and enhancements for SPL
  omap4: automatic sdram detection
  omap4: calculate EMIF register values
  omap4: add sdram init support
  omap4: add clock support
  omap4: add OMAP4430 revision check
  omap4: cleanup pin mux data
  omap4: utility function to identify the context of hw init
  DA8xx: fix LPSC constants
  DA8xx: switch an enum to defines for consistency
  DA8xx: add MMC/SD controller addresses
  DaVinci EMAC: declare function for all DA8xx CPUs
  DA8xx: add generic GPIO driver
  DaVinci: rename gpio_defs.h to gpio.h
  omap3evm: eth: Include functions only when necessary
  omap3evm: Update ethernet reset sequence for Rev.G board
  omap3evm: eth: split function setup_net_chip
  omap3: Include array definition only when it is used
  omap730p2: fix build breaks
  omap2420h4: fix build breaks
  omap1610inn: fix build breaks
  omap1510inn: fix build breaks
  omap5912osk: fix build breaks
  omap1610h2: fix build breaks

1 files changed, 26 insertions, 12 deletions

diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
index 15e880a..6eb0f30 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
@@ -28,17 +28,31 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
 
 void at91_serial0_hw_init(void)
 {
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTA, 26, 1);		/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);		/* RXD0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 27, PUP);		/* RXD0 */
 	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
 }
 
@@ -47,7 +61,7 @@ void at91_serial1_hw_init(void)
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTD, 0, 1);		/* TXD1 */
-	at91_set_a_periph(AT91_PIO_PORTD, 1, 0);		/* RXD1 */
+	at91_set_a_periph(AT91_PIO_PORTD, 1, PUP);		/* RXD1 */
 	writel(1 << ATMEL_ID_USART1, &pmc->pcer);
 }
 
@@ -56,7 +70,7 @@ void at91_serial2_hw_init(void)
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTD, 2, 1);		/* TXD2 */
-	at91_set_a_periph(AT91_PIO_PORTD, 3, 0);		/* RXD2 */
+	at91_set_a_periph(AT91_PIO_PORTD, 3, PUP);		/* RXD2 */
 	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
 }
 
@@ -64,7 +78,7 @@ void at91_seriald_hw_init(void)
 {
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
-	at91_set_a_periph(AT91_PIO_PORTC, 30, 0);		/* DRXD */
+	at91_set_a_periph(AT91_PIO_PORTC, 30, PUP);		/* DRXD */
 	at91_set_a_periph(AT91_PIO_PORTC, 31, 1);		/* DTXD */
 	writel(1 << ATMEL_ID_SYS, &pmc->pcer);
 }
@@ -74,9 +88,9 @@ void at91_spi0_hw_init(unsigned long cs_mask)
 {
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
-	at91_set_b_periph(AT91_PIO_PORTA, 0, 0);	/* SPI0_MISO */
-	at91_set_b_periph(AT91_PIO_PORTA, 1, 0);	/* SPI0_MOSI */
-	at91_set_b_periph(AT91_PIO_PORTA, 2, 0);	/* SPI0_SPCK */
+	at91_set_b_periph(AT91_PIO_PORTA, 0, PUP);	/* SPI0_MISO */
+	at91_set_b_periph(AT91_PIO_PORTA, 1, PUP);	/* SPI0_MOSI */
+	at91_set_b_periph(AT91_PIO_PORTA, 2, PUP);	/* SPI0_SPCK */
 
 	/* Enable clock */
 	writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
@@ -111,9 +125,9 @@ void at91_spi1_hw_init(unsigned long cs_mask)
 {
 	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
-	at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* SPI1_MISO */
-	at91_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* SPI1_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTB, 14, 0);	/* SPI1_SPCK */
+	at91_set_a_periph(AT91_PIO_PORTB, 12, PUP);	/* SPI1_MISO */
+	at91_set_a_periph(AT91_PIO_PORTB, 13, PUP);	/* SPI1_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTB, 14, PUP);	/* SPI1_SPCK */
 
 	/* Enable clock */
 	writel(1 << ATMEL_ID_SPI1, &pmc->pcer);