summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/arm920t
diff options
context:
space:
mode:
authorC Nauman <cnauman@diagraph.com>2010-10-26 23:04:31 +0900
committerMinkyu Kang <mk7.kang@samsung.com>2010-10-28 15:35:56 +0900
commitd9abba8254c3e6b9a1d5c2e52c2d8088bbeb520f (patch)
tree7f97ab2012dfa882e65290138379e22de31bf227 /arch/arm/cpu/arm920t
parent1628cfc4fe4b2c3caa7e9d5622f0665c54e8ba6e (diff)
downloadu-boot-imx-d9abba8254c3e6b9a1d5c2e52c2d8088bbeb520f.zip
u-boot-imx-d9abba8254c3e6b9a1d5c2e52c2d8088bbeb520f.tar.gz
u-boot-imx-d9abba8254c3e6b9a1d5c2e52c2d8088bbeb520f.tar.bz2
Add generic support for samsung s3c2440
This patch adds generic support for the Samsung s3c2440 processor. Global s3c24x0 changes to struct members converting from upper case to lower case. Signed-off-by: Craig Nauman <cnauman@diagraph.com> Cc: kevin.morfitt@fearnside-systems.co.uk Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Diffstat (limited to 'arch/arm/cpu/arm920t')
-rw-r--r--arch/arm/cpu/arm920t/s3c24x0/speed.c30
-rw-r--r--arch/arm/cpu/arm920t/s3c24x0/timer.c23
-rw-r--r--arch/arm/cpu/arm920t/s3c24x0/usb.c10
-rw-r--r--arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c12
4 files changed, 48 insertions, 27 deletions
diff --git a/arch/arm/cpu/arm920t/s3c24x0/speed.c b/arch/arm/cpu/arm920t/s3c24x0/speed.c
index b13283a..3ae558d 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/speed.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/speed.c
@@ -54,9 +54,9 @@ static ulong get_PLLCLK(int pllreg)
ulong r, m, p, s;
if (pllreg == MPLL)
- r = readl(&clk_power->MPLLCON);
+ r = readl(&clk_power->mpllcon);
else if (pllreg == UPLL)
- r = readl(&clk_power->UPLLCON);
+ r = readl(&clk_power->upllcon);
else
hang();
@@ -64,7 +64,12 @@ static ulong get_PLLCLK(int pllreg)
p = ((r & 0x003F0) >> 4) + 2;
s = r & 0x3;
+#if defined(CONFIG_S3C2440)
+ if (pllreg == MPLL)
+ return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s));
+#endif
return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
+
}
/* return FCLK frequency */
@@ -77,8 +82,23 @@ ulong get_FCLK(void)
ulong get_HCLK(void)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-
- return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 : get_FCLK();
+#ifdef CONFIG_S3C2440
+ switch (readl(&clk_power->clkdivn) & 0x6) {
+ default:
+ case 0:
+ return get_FCLK();
+ case 2:
+ return get_FCLK() / 2;
+ case 4:
+ return (readl(&clk_power->camdivn) & (1 << 9)) ?
+ get_FCLK() / 8 : get_FCLK() / 4;
+ case 6:
+ return (readl(&clk_power->camdivn) & (1 << 8)) ?
+ get_FCLK() / 6 : get_FCLK() / 3;
+ }
+#else
+ return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK();
+#endif
}
/* return PCLK frequency */
@@ -86,7 +106,7 @@ ulong get_PCLK(void)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 : get_HCLK();
+ return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK();
}
/* return UCLK frequency */
diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c b/arch/arm/cpu/arm920t/s3c24x0/timer.c
index 7d47354..8cf9ff6 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/timer.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c
@@ -43,7 +43,7 @@ static inline ulong READ_TIMER(void)
{
struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
- return readl(&timers->TCNTO4) & 0xffff;
+ return readl(&timers->tcnto4) & 0xffff;
}
static ulong timestamp;
@@ -56,7 +56,7 @@ int timer_init(void)
/* use PWM Timer 4 because it has no output */
/* prescaler for Timer 4 is 16 */
- writel(0x0f00, &timers->TCFG0);
+ writel(0x0f00, &timers->tcfg0);
if (timer_load_val == 0) {
/*
* for 10 ms clock period @ PCLK with 4 bit divider = 1/2
@@ -68,13 +68,13 @@ int timer_init(void)
}
/* load value for 10 ms timeout */
lastdec = timer_load_val;
- writel(timer_load_val, &timers->TCNTB4);
- /* auto load, manual update of Timer 4 */
- tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000;
- writel(tmr, &timers->TCON);
- /* auto load, start Timer 4 */
+ writel(timer_load_val, &timers->tcntb4);
+ /* auto load, manual update of timer 4 */
+ tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
+ writel(tmr, &timers->tcon);
+ /* auto load, start timer 4 */
tmr = (tmr & ~0x0700000) | 0x0500000;
- writel(tmr, &timers->TCON);
+ writel(tmr, &timers->tcon);
timestamp = 0;
return (0);
@@ -181,6 +181,7 @@ ulong get_tbclk(void)
tbclk = timer_load_val * 100;
#elif defined(CONFIG_SBC2410X) || \
defined(CONFIG_SMDK2410) || \
+ defined(CONFIG_S3C2440) || \
defined(CONFIG_VCMA9)
tbclk = CONFIG_SYS_HZ;
#else
@@ -206,13 +207,13 @@ void reset_cpu(ulong ignored)
watchdog = s3c24x0_get_base_watchdog();
/* Disable watchdog */
- writel(0x0000, &watchdog->WTCON);
+ writel(0x0000, &watchdog->wtcon);
/* Initialize watchdog timer count register */
- writel(0x0001, &watchdog->WTCNT);
+ writel(0x0001, &watchdog->wtcnt);
/* Enable watchdog timer; assert reset at timer timeout */
- writel(0x0021, &watchdog->WTCON);
+ writel(0x0021, &watchdog->wtcon);
while (1)
/* loop forever and wait for reset to happen */;
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c
index e468ed0..226a3f6 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/usb.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c
@@ -39,14 +39,14 @@ int usb_cpu_init(void)
* Set the 48 MHz UPLL clocking. Values are taken from
* "PLL value selection guide", 6-23, s3c2400_UM.pdf.
*/
- writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON);
+ writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
/* 1 = use pads related USB for USB host */
- writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR);
+ writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
/*
* Enable USB host clock.
*/
- writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
+ writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
return 0;
}
@@ -55,14 +55,14 @@ int usb_cpu_stop(void)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
/* may not want to do this */
- writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
+ writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
return 0;
}
int usb_cpu_init_fail(void)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
+ writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
return 0;
}
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
index 5aa8d64..ccc9738 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -1666,13 +1666,13 @@ int usb_lowlevel_init(void)
* Set the 48 MHz UPLL clocking. Values are taken from
* "PLL value selection guide", 6-23, s3c2400_UM.pdf.
*/
- clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
- gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
+ clk_power->upllcon = ((40 << 12) + (1 << 4) + 2);
+ gpio->misccr |= 0x8; /* 1 = use pads related USB for USB host */
/*
* Enable USB host clock.
*/
- clk_power->CLKCON |= (1 << 4);
+ clk_power->clkcon |= (1 << 4);
memset(&gohci, 0, sizeof(struct ohci));
memset(&urb_priv, 0, sizeof(struct urb_priv));
@@ -1709,7 +1709,7 @@ int usb_lowlevel_init(void)
if (hc_reset(&gohci) < 0) {
hc_release_ohci(&gohci);
/* Initialization failed */
- clk_power->CLKCON &= ~(1 << 4);
+ clk_power->clkcon &= ~(1 << 4);
return -1;
}
@@ -1722,7 +1722,7 @@ int usb_lowlevel_init(void)
err("can't start usb-%s", gohci.slot_name);
hc_release_ohci(&gohci);
/* Initialization failed */
- clk_power->CLKCON &= ~(1 << 4);
+ clk_power->clkcon &= ~(1 << 4);
return -1;
}
#ifdef DEBUG
@@ -1748,7 +1748,7 @@ int usb_lowlevel_stop(void)
/* call hc_release_ohci() here ? */
hc_reset(&gohci);
/* may not want to do this */
- clk_power->CLKCON &= ~(1 << 4);
+ clk_power->clkcon &= ~(1 << 4);
return 0;
}