Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  drivers/rtc: add Marvell Integrated RTC
  Armada100: Add Board Support for Marvell GuruPlug-Display
  Armada100: MFP macro naming correction
  arm: auto gen asm-offsets.h for mb86r0x
  spear: fix build errors for spear3xx/spear600 platforms
  cosmetic: arm: lib/board.c: Coding Style cleanup
  ARM: versatile: fix board support
  SMDKV310: Enable device tree support
  SMDKV310: MMC_SPL: Fix building when using "make O="
  arm: a320: enable tagged list support
  arm: a320: fix multiline comment style
  ARMv7: u8500_href: Add missing header to fix compiler warning
  Removed unused define, CONFIG_ARMV7.
  avr32: add grasshopper (ICnova AP7000) board
  AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings
  MAKEALL: remove AT91 boards that are in boards.cfg
  AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master
  AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master
  AT91: Board fix for AT91SAM9261-EK
  AT91: SoC fix at91sam9261_matrix.h
  AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
  AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master
  AT91: change common at91sam9261 files to compile with new scheme
  AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
  a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
  README: fix arm920t/at91 path
  net/eth.c: drop obsolete at91rm9200 support
  README.at91-soc: remove AT91(RM9200) joining notice
  a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
  MAKEALL: remove obsolete at91rm9200 soc
  ARM: remove obsolete at91rm9200
  omap4: clock init support for omap4460
  omap4: support TPS programming
  omap: reuse omap3 gpio support in omap4
  omap4: sdram init changes for omap4460
  omap4: add omap4460 revision detection
  mkimage: Add OMAP boot image support
  omap: add MMC and FAT support to SPL
  omap: add basic SPL support
  armv7: start.S: fixes and enhancements for SPL
  omap4: automatic sdram detection
  omap4: calculate EMIF register values
  omap4: add sdram init support
  omap4: add clock support
  omap4: add OMAP4430 revision check
  omap4: cleanup pin mux data
  omap4: utility function to identify the context of hw init
  DA8xx: fix LPSC constants
  DA8xx: switch an enum to defines for consistency
  DA8xx: add MMC/SD controller addresses
  DaVinci EMAC: declare function for all DA8xx CPUs
  DA8xx: add generic GPIO driver
  DaVinci: rename gpio_defs.h to gpio.h
  omap3evm: eth: Include functions only when necessary
  omap3evm: Update ethernet reset sequence for Rev.G board
  omap3evm: eth: split function setup_net_chip
  omap3: Include array definition only when it is used
  omap730p2: fix build breaks
  omap2420h4: fix build breaks
  omap1610inn: fix build breaks
  omap1510inn: fix build breaks
  omap5912osk: fix build breaks
  omap1610h2: fix build breaks

1 files changed, 0 insertions, 152 deletions

diff --git a/arch/arm/cpu/arm920t/at91rm9200/spi.c b/arch/arm/cpu/arm920t/at91rm9200/spi.c
deleted file mode 100644
index c70efc6..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/spi.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* Driver for ATMEL DataFlash support
- * Author : Hamid Ikdoumi (Atmel)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-
-#ifdef CONFIG_HAS_DATAFLASH
-#include <dataflash.h>
-
-#define AT91C_SPI_CLK	10000000	/* Max Value = 10MHz to be compliant to
-					the Continuous Array Read function */
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS	(0xC << 16)
-#define DATAFLASH_TCHS	(0x1 << 24)
-
-#define AT91C_TIMEOUT_WRDY		200000
-#define AT91C_SPI_PCS0_SERIAL_DATAFLASH	0xE	/* Chip Select 0: NPCS0%1110 */
-#define AT91C_SPI_PCS3_DATAFLASH_CARD	0x7	/* Chip Select 3: NPCS3%0111 */
-
-/*-------------------------------------------------------------------*/
-/*	SPI DataFlash Init					     */
-/*-------------------------------------------------------------------*/
-void AT91F_SpiInit(void)
-{
-	/* Configure PIOs */
-	AT91C_BASE_PIOA->PIO_ASR =
-		AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI |
-		AT91C_PA5_NPCS2 | AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
-		AT91C_PA2_SPCK;
-	AT91C_BASE_PIOA->PIO_PDR =
-		AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI |
-		AT91C_PA5_NPCS2 | AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
-		AT91C_PA2_SPCK;
-	/* Enable CLock */
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
-
-	/* Reset the SPI */
-	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
-
-	/* Configure SPI in Master Mode with No CS selected !!! */
-	AT91C_BASE_SPI->SPI_MR =
-		AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
-
-	/* Configure CS0 and CS3 */
-	*(AT91C_SPI_CSR + 0) =
-		AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
-		(AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
-		((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-
-	*(AT91C_SPI_CSR + 3) =
-		AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
-		(AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
-		((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-}
-
-void AT91F_SpiEnable(int cs)
-{
-	switch(cs) {
-	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
-		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI->SPI_MR |=
-			((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) &
-				AT91C_SPI_PCS);
-		break;
-	case 3:	/* Configure SPI CS3 for Serial DataFlash Card */
-		/* Set up PIO SDC_TYPE to switch on DataFlash Card */
-		/* and not MMC/SDCard */
-		AT91C_BASE_PIOB->PIO_PER =
-			AT91C_PIO_PB7;	/* Set in PIO mode */
-		AT91C_BASE_PIOB->PIO_OER =
-			AT91C_PIO_PB7;	/* Configure in output */
-		/* Clear Output */
-		AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
-		/* Configure PCS */
-		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI->SPI_MR |=
-			((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
-		break;
-	}
-
-	/* SPI_Enable */
-	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; }
-
-/*---------------------------------------------------------------------------*/
-/* \fn    AT91F_SpiWrite						     */
-/* \brief Set the PDC registers for a transfert				     */
-/*---------------------------------------------------------------------------*/
-unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
-{
-	unsigned int timeout;
-	unsigned long start;
-
-	pDesc->state = BUSY;
-
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-
-	/* Initialize the Transmit and Receive Pointer */
-	AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
-	AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
-
-	/* Intialize the Transmit and Receive Counters */
-	AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
-	AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
-
-	if ( pDesc->tx_data_size != 0 ) {
-		/* Initialize the Next Transmit and Next Receive Pointer */
-		AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
-		AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
-
-		/* Intialize the Next Transmit and Next Receive Counters */
-		AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
-		AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
-	}
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-	timeout = 0;
-
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
-	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) &&
-		((timeout = get_timer(start) ) < CONFIG_SYS_SPI_WRITE_TOUT));
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-	pDesc->state = IDLE;
-
-	if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT){
-		printf("Error Timeout\n\r");
-		return DATAFLASH_ERROR;
-	}
-
-	return DATAFLASH_OK;
-}
-#endif