arc: rename "arc700" in "arcv1"

As a preparation to ARCv2 port submission we rename "arc700" folder to
"arcv1" which stands for ARCv1 ISA also known as ARCompact.

This will allow us to add more flavours of binary-compatible ARCv1 CPUs
like ARC600 if needed later on and all required ARCv2 CPUs (which are
binary incompatible with ARCv1) in "arcv2" folder in subsequent commits.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Igor Guryanov <guryanov@synopsys.com>

3 files changed, 0 insertions, 268 deletions

diff --git a/arch/arc/cpu/arc700/Makefile b/arch/arc/cpu/arc700/Makefile
deleted file mode 100644
index 3704ebe..0000000
--- a/arch/arc/cpu/arc700/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += start.o
diff --git a/arch/arc/cpu/arc700/config.mk b/arch/arc/cpu/arc700/config.mk
deleted file mode 100644
index 3206ff4..0000000
--- a/arch/arc/cpu/arc700/config.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mA7
diff --git a/arch/arc/cpu/arc700/start.S b/arch/arc/cpu/arc700/start.S
deleted file mode 100644
index 01cfba4..0000000
--- a/arch/arc/cpu/arc700/start.S
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/arcregs.h>
-
-/*
- * Note on the LD/ST addressing modes with address register write-back
- *
- * LD.a same as LD.aw
- *
- * LD.a    reg1, [reg2, x]  => Pre Incr
- *      Eff Addr for load = [reg2 + x]
- *
- * LD.ab   reg1, [reg2, x]  => Post Incr
- *      Eff Addr for load = [reg2]
- */
-
-.macro PUSH reg
-	st.a	\reg, [%sp, -4]
-.endm
-
-.macro PUSHAX aux
-	lr	%r9, [\aux]
-	PUSH	%r9
-.endm
-
-.macro  SAVE_R1_TO_R24
-	PUSH	%r1
-	PUSH	%r2
-	PUSH	%r3
-	PUSH	%r4
-	PUSH	%r5
-	PUSH	%r6
-	PUSH	%r7
-	PUSH	%r8
-	PUSH	%r9
-	PUSH	%r10
-	PUSH	%r11
-	PUSH	%r12
-	PUSH	%r13
-	PUSH	%r14
-	PUSH	%r15
-	PUSH	%r16
-	PUSH	%r17
-	PUSH	%r18
-	PUSH	%r19
-	PUSH	%r20
-	PUSH	%r21
-	PUSH	%r22
-	PUSH	%r23
-	PUSH	%r24
-.endm
-
-.macro SAVE_ALL_SYS
-	/* saving %r0 to reg->r0 in advance since we read %ecr into it */
-	st	%r0, [%sp, -8]
-	lr	%r0, [%ecr]	/* all stack addressing is manual so far */
-	st	%r0, [%sp]
-	st	%sp, [%sp, -4]
-	/* now move %sp to reg->r0 position so we can do "push" automatically */
-	sub	%sp, %sp, 8
-
-	SAVE_R1_TO_R24
-	PUSH	%r25
-	PUSH	%gp
-	PUSH	%fp
-	PUSH	%blink
-	PUSHAX	%eret
-	PUSHAX	%erstatus
-	PUSH	%lp_count
-	PUSHAX	%lp_end
-	PUSHAX	%lp_start
-	PUSHAX	%erbta
-.endm
-
-.macro SAVE_EXCEPTION_SOURCE
-#ifdef CONFIG_MMU
-	/* If MMU exists exception faulting address is loaded in EFA reg */
-	lr	%r0, [%efa]
-#else
-	/* Otherwise in ERET (exception return) reg */
-	lr	%r0, [%eret]
-#endif
-.endm
-
-.section .ivt, "ax",@progbits
-.align 4
-_ivt:
-	/* Critical system events */
-	j	_start			/* 0 - 0x000 */
-	j	memory_error		/* 1 - 0x008 */
-	j	instruction_error	/* 2 - 0x010 */
-
-	/* Device interrupts */
-.rept	29
-	j	interrupt_handler	/* 3:31 - 0x018:0xF8 */
-.endr
-	/* Exceptions */
-	j	EV_MachineCheck		/* 0x100, Fatal Machine check  (0x20) */
-	j	EV_TLBMissI		/* 0x108, Intruction TLB miss  (0x21) */
-	j	EV_TLBMissD		/* 0x110, Data TLB miss        (0x22) */
-	j	EV_TLBProtV		/* 0x118, Protection Violation (0x23)
-							or Misaligned Access  */
-	j	EV_PrivilegeV		/* 0x120, Privilege Violation  (0x24) */
-	j	EV_Trap			/* 0x128, Trap exception       (0x25) */
-	j	EV_Extension		/* 0x130, Extn Intruction Excp (0x26) */
-
-.text
-.globl _start
-_start:
-	/* Setup interrupt vector base that matches "__text_start" */
-	sr	__ivt_start, [ARC_AUX_INTR_VEC_BASE]
-
-	/* Setup stack pointer */
-	mov	%sp, CONFIG_SYS_INIT_SP_ADDR
-	mov	%fp, %sp
-
-	/* Clear bss */
-	mov	%r0, __bss_start
-	mov	%r1, __bss_end
-
-clear_bss:
-	st.ab	0, [%r0, 4]
-	brlt	%r0, %r1, clear_bss
-
-	/* Zero the one and only argument of "board_init_f" */
-	mov_s	%r0, 0
-	j	board_init_f
-
-memory_error:
-	SAVE_ALL_SYS
-	SAVE_EXCEPTION_SOURCE
-	mov	%r1, %sp
-	j	do_memory_error
-
-instruction_error:
-	SAVE_ALL_SYS
-	SAVE_EXCEPTION_SOURCE
-	mov	%r1, %sp
-	j	do_instruction_error
-
-interrupt_handler:
-	/* Todo - save and restore CPU context when interrupts will be in use */
-	bl	do_interrupt_handler
-	rtie
-
-EV_MachineCheck:
-	SAVE_ALL_SYS
-	SAVE_EXCEPTION_SOURCE
-	mov	%r1, %sp
-	j	do_machine_check_fault
-
-EV_TLBMissI:
-	SAVE_ALL_SYS
-	mov	%r0, %sp
-	j	do_itlb_miss
-
-EV_TLBMissD:
-	SAVE_ALL_SYS
-	mov	%r0, %sp
-	j	do_dtlb_miss
-
-EV_TLBProtV:
-	SAVE_ALL_SYS
-	SAVE_EXCEPTION_SOURCE
-	mov	%r1, %sp
-	j	do_tlb_prot_violation
-
-EV_PrivilegeV:
-	SAVE_ALL_SYS
-	mov	%r0, %sp
-	j	do_privilege_violation
-
-EV_Trap:
-	SAVE_ALL_SYS
-	mov	%r0, %sp
-	j	do_trap
-
-EV_Extension:
-	SAVE_ALL_SYS
-	mov	%r0, %sp
-	j	do_extension
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r0 = start_addr_sp
- * r1 = new__gd
- * r2 = relocaddr
- */
-.align 4
-.globl	relocate_code
-relocate_code:
-	/*
-	 * r0-r12 might be clobbered by C functions
-	 * so we use r13-r16 for storage here
-	 */
-	mov	%r13, %r0		/* save addr_sp */
-	mov	%r14, %r1		/* save addr of gd */
-	mov	%r15, %r2		/* save addr of destination */
-
-	mov	%r16, %r2		/* %r9 - relocation offset */
-	sub	%r16, %r16, __image_copy_start
-
-/* Set up the stack */
-stack_setup:
-	mov	%sp, %r13
-	mov	%fp, %sp
-
-/* Check if monitor is loaded right in place for relocation */
-	mov	%r0, __image_copy_start
-	cmp	%r0, %r15		/* skip relocation if code loaded */
-	bz	do_board_init_r		/* in target location already */
-
-/* Copy data (__image_copy_start - __image_copy_end) to new location */
-	mov	%r1, %r15
-	mov	%r2, __image_copy_end
-	sub	%r2, %r2, %r0		/* r3 <- amount of bytes to copy */
-	asr	%r2, %r2, 2		/* r3 <- amount of words to copy */
-	mov	%lp_count, %r2
-	lp	copy_end
-	ld.ab	%r2,[%r0,4]
-	st.ab	%r2,[%r1,4]
-copy_end:
-
-/* Fix relocations related issues */
-	bl	do_elf_reloc_fixups
-#ifndef CONFIG_SYS_ICACHE_OFF
-	bl	invalidate_icache_all
-#endif
-#ifndef CONFIG_SYS_DCACHE_OFF
-	bl	flush_dcache_all
-#endif
-
-/* Update position of intterupt vector table */
-	lr	%r0, [ARC_AUX_INTR_VEC_BASE]	/* Read current position */
-	add	%r0, %r0, %r16			/* Update address */
-	sr	%r0, [ARC_AUX_INTR_VEC_BASE]	/* Write new position */
-
-do_board_init_r:
-/* Prepare for exection of "board_init_r" in relocated monitor */
-	mov	%r2, board_init_r	/* old address of "board_init_r()" */
-	add	%r2, %r2, %r16		/* new address of "board_init_r()" */
-	mov	%r0, %r14		/* 1-st parameter: gd_t */
-	mov	%r1, %r15		/* 2-nd parameter: dest_addr */
-	j	[%r2]