diff options
| author | Peter Tyser <ptyser@xes-inc.com> | 2010-04-12 22:28:09 -0500 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2010-04-13 09:13:16 +0200 |
| commit | 8d1f268204b07e172f3cb5cee0a3974d605b0b98 (patch) | |
| tree | c3359e920cc886e7060fb099bf933496aca37153 /README | |
| parent | 819833af39a91fa1c1e8252862bbda6f5a602f7b (diff) | |
| download | u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.zip u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.tar.gz u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.tar.bz2 | |
ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Diffstat (limited to 'README')
| -rw-r--r-- | README | 4 |
1 files changed, 2 insertions, 2 deletions
@@ -1393,7 +1393,7 @@ The following options need to be configured: to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie the CPU's i2c node address). - Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c) + Now, the u-boot i2c code for the mpc8xx (arch/ppc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node and so its address should therefore be cleared to 0 (See, eg, MPC823e User's Manual p.16-473). So, set CONFIG_SYS_I2C_SLAVE to 0. @@ -2703,7 +2703,7 @@ Low Level (hardware related) configuration options: CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) - Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. + Overrides the default PCI memory map in arch/ppc/cpu/mpc8260/pci.c if set. - CONFIG_PCI_DISABLE_PCIE: Disable PCI-Express on systems where it is supported but not |