Merge with /home/wd/git/u-boot/master

1 files changed, 124 insertions, 9 deletions

diff --git a/README b/README
index c2b1006..c04cbad 100644
--- a/README
+++ b/README
@@ -132,6 +132,7 @@ Directory Hierarchy:
   - arm925t	Files specific to ARM 925 CPUs
   - arm926ejs	Files specific to ARM 926 CPUs
   - arm1136	Files specific to ARM 1136 CPUs
+  - at32ap	Files specific to Atmel AVR32 AP CPUs
   - i386	Files specific to i386 CPUs
   - ixp		Files specific to Intel XScale IXP CPUs
   - mcf52x2	Files specific to Freescale ColdFire MCF52x2 CPUs
@@ -156,6 +157,7 @@ Directory Hierarchy:
 - examples	Example code for standalone applications, etc.
 - include	Header Files
 - lib_arm	Files generic to ARM	 architecture
+- lib_avr32	Files generic to AVR32	 architecture
 - lib_generic	Files generic to all	 architectures
 - lib_i386	Files generic to i386	 architecture
 - lib_m68k	Files generic to m68k	 architecture
@@ -256,6 +258,9 @@ The following options need to be configured:
 		----------------------
 		CONFIG_NIOS2
 
+		AVR32 based CPUs:
+		----------------------
+		CONFIG_AT32AP
 
 - Board Type:	Define exactly one of
 
@@ -325,6 +330,15 @@ The following options need to be configured:
 		CONFIG_PCI5441 CONFIG_PK1C20
 		CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
 
+		AVR32 based boards:
+		-------------------
+
+		CONFIG_ATSTK1000
+
+- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
+		Define exactly one of
+		CONFIG_ATSTK1002
+
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of
@@ -447,6 +461,11 @@ The following options need to be configured:
 		Board code has addition modification that it wants to make
 		to the flat device tree before handing it off to the kernel
 
+		CONFIG_OF_BOOT_CPU
+
+		This define fills in the correct boot cpu in the boot
+		param header, the default value is zero if undefined.
+
 - Serial Ports:
 		CFG_PL010_SERIAL
 
@@ -1509,10 +1528,14 @@ The following options need to be configured:
 		default value of 5 is used.
 
 - Command Interpreter:
-		CFG_AUTO_COMPLETE
+		CONFIG_AUTO_COMPLETE
 
 		Enable auto completion of commands using TAB.
 
+		Note that this feature has NOT been implemented yet
+		for the "hush" shell.
+
+
 		CFG_HUSH_PARSER
 
 		Define this variable to enable the "hush" shell (from
@@ -2385,6 +2408,26 @@ images ready for download to / installation on your system:
 - "u-boot" is an image in ELF binary format
 - "u-boot.srec" is in Motorola S-Record format
 
+By default the build is performed locally and the objects are saved
+in the source directory. One of the two methods can be used to change
+this behavior and build U-Boot to some external directory:
+
+1. Add O= to the make command line invocations:
+
+	make O=/tmp/build distclean
+	make O=/tmp/build NAME_config
+	make O=/tmp/build all
+
+2. Set environment variable BUILD_DIR to point to the desired location:
+
+	export BUILD_DIR=/tmp/build
+	make distclean
+	make NAME_config
+	make all
+
+Note that the command line "O=" setting overrides the BUILD_DIR environment
+variable.
+
 
 Please be aware that the Makefiles assume you are using GNU make, so
 for instance on NetBSD you might need to use "gmake" instead of
@@ -2438,6 +2481,22 @@ or to build on a native PowerPC system you can type
 
 	CROSS_COMPILE=' ' MAKEALL
 
+When using the MAKEALL script, the default behaviour is to build U-Boot
+in the source directory. This location can be changed by setting the
+BUILD_DIR environment variable. Also, for each target built, the MAKEALL
+script saves two log files (<target>.ERR and <target>.MAKEALL) in the
+<source dir>/LOG directory. This default location can be changed by
+setting the MAKEALL_LOGDIR environment variable. For example:
+
+	export BUILD_DIR=/tmp/build
+	export MAKEALL_LOGDIR=/tmp/log
+	CROSS_COMPILE=ppc_8xx- MAKEALL
+
+With the above settings build objects are saved in the /tmp/build, log
+files are saved in the /tmp/log and the source tree remains clean during
+the whole build process.
+
+
 See also "U-Boot Porting Guide" below.
 
 
@@ -2748,9 +2807,9 @@ defines the following image properties:
   4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
   LynxOS, pSOS, QNX, RTEMS, ARTOS;
   Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
-* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
+* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
   IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
-  Currently supported: ARM, Intel x86, MIPS, NIOS, PowerPC).
+  Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
 * Compression Type (uncompressed, gzip, bzip2)
 * Load Address
 * Entry Point
@@ -3081,6 +3140,55 @@ format!) to the "bootm" command:
 
 	bash#
 
+Boot Linux and pass a flat device tree:
+-----------
+
+First, U-Boot must be compiled with the appropriate defines. See the section
+titled "Linux Kernel Interface" above for a more in depth explanation. The
+following is an example of how to start a kernel and pass an updated
+flat device tree:
+
+=> print oftaddr
+oftaddr=0x300000
+=> print oft
+oft=oftrees/mpc8540ads.dtb
+=> tftp $oftaddr $oft
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.101
+Filename 'oftrees/mpc8540ads.dtb'.
+Load address: 0x300000
+Loading: #
+done
+Bytes transferred = 4106 (100a hex)
+=> tftp $loadaddr $bootfile
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.2
+Filename 'uImage'.
+Load address: 0x200000
+Loading:############
+done
+Bytes transferred = 1029407 (fb51f hex)
+=> print loadaddr
+loadaddr=200000
+=> print oftaddr
+oftaddr=0x300000
+=> bootm $loadaddr - $oftaddr
+## Booting image at 00200000 ...
+   Image Name:	 Linux-2.6.17-dirty
+   Image Type:	 PowerPC Linux Kernel Image (gzip compressed)
+   Data Size:	 1029343 Bytes = 1005.2 kB
+   Load Address: 00000000
+   Entry Point:	 00000000
+   Verifying Checksum ... OK
+   Uncompressing Kernel Image ... OK
+Booting using flat device tree at 0x300000
+Using MPC85xx ADS machine description
+Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb
+[snip]
+
+
 More About U-Boot Image Types:
 ------------------------------
 
@@ -3531,12 +3639,19 @@ Coding Standards:
 -----------------
 
 All contributions to U-Boot should conform to the Linux kernel
-coding style; see the file "Documentation/CodingStyle" in your Linux
-kernel source directory.
-
-Please note that U-Boot is implemented in C (and to some small parts
-in Assembler); no C++ is used, so please do not use C++ style
-comments (//) in your code.
+coding style; see the file "Documentation/CodingStyle" and the script
+"scripts/Lindent" in your Linux kernel source directory.  In sources
+originating from U-Boot a style corresponding to "Lindent -pcs" (adding
+spaces before parameters to function calls) is actually used.
+
+Source files originating from a different project (for example the
+MTD subsystem) are generally exempt from these guidelines and are not
+reformated to ease subsequent migration to newer versions of those
+sources.
+
+Please note that U-Boot is implemented in C (and to some small parts in
+Assembler); no C++ is used, so please do not use C++ style comments (//)
+in your code.
 
 Please also stick to the following formatting rules:
 - remove any trailing white space