diff options
| author | Przemyslaw Marczak <p.marczak@samsung.com> | 2013-10-23 14:30:46 +0200 |
|---|---|---|
| committer | Marek Vasut <marex@denx.de> | 2013-11-08 20:46:19 +0100 |
| commit | 351e9b206934c2d4a6a0acd1547caf077e4e675c (patch) | |
| tree | 6914a94379d73081a2f61f35e7d9d865ced5f5a5 /README | |
| parent | 4b19ed6c765eb7f8a8873ab05db5c2dfca7f554a (diff) | |
| download | u-boot-imx-351e9b206934c2d4a6a0acd1547caf077e4e675c.zip u-boot-imx-351e9b206934c2d4a6a0acd1547caf077e4e675c.tar.gz u-boot-imx-351e9b206934c2d4a6a0acd1547caf077e4e675c.tar.bz2 | |
usb: ums: add ums exit feature by ctrl+c or by detach usb cable
This patch allows exiting from UMS mode to u-boot prompt
by detaching usb cable or by pressing ctrl+c.
Add new config: CONFIG_USB_CABLE_CHECK. If defined then board
file should provide function: usb_cable_connected() (include/usb.h)
that return 1 if cable is connected and 0 otherwise.
Changes v2:
- add a note to the README
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Diffstat (limited to 'README')
| -rw-r--r-- | README | 7 |
1 files changed, 7 insertions, 0 deletions
@@ -1367,6 +1367,13 @@ The following options need to be configured: for your device - CONFIG_USBD_PRODUCTID 0xFFFF + Some USB device drivers may need to check USB cable attachment. + In this case you can enable following config in BoardName.h: + CONFIG_USB_CABLE_CHECK + This enables function definition: + - usb_cable_connected() in include/usb.h + Implementation of this function is board-specific. + - ULPI Layer Support: The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via the generic ULPI layer. The generic layer accesses the ULPI PHY |