diff options
| author | Fabio Estevam <fabio.estevam@freescale.com> | 2013-04-11 09:35:35 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-04-12 07:55:03 +0200 |
| commit | a430e91643384a944abf32e1079f79f66ef87d97 (patch) | |
| tree | fe83486e8c304c7f946f045f68fb1d1e6697c49f /README | |
| parent | 66bd1846ef08412c5c850b8a672d6fdc0eab539a (diff) | |
| download | u-boot-imx-a430e91643384a944abf32e1079f79f66ef87d97.zip u-boot-imx-a430e91643384a944abf32e1079f79f66ef87d97.tar.gz u-boot-imx-a430e91643384a944abf32e1079f79f66ef87d97.tar.bz2 | |
mtd: nand: mxc_nand: Fix is_16bit_nand()
Currently is_16bit_nand() is a per SoC function and it decides the bus nand
width by reading some boot related registers.
This method works when NAND is the boot medium, but does not work if another
boot medium is used. For example: booting from a SD card and then using NAND
to store the environment variables, would lead to the following error:
NAND bus width 16 instead 8 bit
No NAND device found!!!
0 MiB
Use CONFIG_SYS_NAND_BUSWIDTH_16BIT symbol to decide the bus width.
If it is defined in the board file, then consider 16-bit NAND bus-width,
otherwise assume 8-bit NAND is used.
This also aligns with Documentation/devicetree/bindings/mtd/nand.txt, which
states:
nand-bus-width : 8 or 16 bus width if not present 8
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Diffstat (limited to 'README')
| -rw-r--r-- | README | 3 |
1 files changed, 2 insertions, 1 deletions
@@ -3759,8 +3759,9 @@ Low Level (hardware related) configuration options: Defined to tell the NAND controller that the NAND chip is using a 16 bit bus. Not all NAND drivers use this symbol. - Example of driver that uses it: + Example of drivers that use it: - drivers/mtd/nand/ndfc.c + - drivers/mtd/nand/mxc_nand.c - CONFIG_SYS_NDFC_EBC0_CFG Sets the EBC0_CFG register for the NDFC. If not defined |