Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 255 insertions, 81 deletions

diff --git a/Makefile b/Makefile
index 2d4b513..4df4812 100644
--- a/Makefile
+++ b/Makefile
@@ -21,11 +21,16 @@
 # MA 02111-1307 USA
 #
 
-VERSION = 1
-PATCHLEVEL = 3
-SUBLEVEL = 4
-EXTRAVERSION =
+VERSION = 2009
+PATCHLEVEL = 01
+SUBLEVEL =
+EXTRAVERSION = -rc1
+ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+else
+U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
+endif
+TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
 HOSTARCH := $(shell uname -m | \
@@ -40,7 +45,12 @@ HOSTARCH := $(shell uname -m | \
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH HOSTOS
+# Set shell to bash if possible, otherwise fall back to sh
+SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	else if [ -x /bin/bash ]; then echo /bin/bash; \
+	else echo sh; fi; fi)
+
+export	HOSTARCH HOSTOS SHELL
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -199,6 +209,7 @@ endif
 OBJS := $(addprefix $(obj),$(OBJS))
 
 LIBS  = lib_generic/libgeneric.a
+LIBS += lib_generic/lzma/liblzma.a
 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 	"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 LIBS += cpu/$(CPU)/lib$(CPU).a
@@ -216,6 +227,7 @@ LIBS += disk/libdisk.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
 LIBS += drivers/dma/libdma.a
+LIBS += drivers/fpga/libfpga.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -225,6 +237,7 @@ LIBS += drivers/mtd/libmtd.a
 LIBS += drivers/mtd/nand/libnand.a
 LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
 LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/ubi/libubi.a
 LIBS += drivers/mtd/spi/libspi_flash.a
 LIBS += drivers/net/libnet.a
 LIBS += drivers/net/phy/libphy.a
@@ -238,9 +251,11 @@ endif
 ifeq ($(CPU),mpc85xx)
 LIBS += drivers/qe/qe.a
 LIBS += cpu/mpc8xxx/ddr/libddr.a
+TAG_SUBDIRS += cpu/mpc8xxx
 endif
 ifeq ($(CPU),mpc86xx)
 LIBS += cpu/mpc8xxx/ddr/libddr.a
+TAG_SUBDIRS += cpu/mpc8xxx
 endif
 LIBS += drivers/rtc/librtc.a
 LIBS += drivers/serial/libserial.a
@@ -252,7 +267,7 @@ LIBS += api/libapi.a
 LIBS += post/libpost.a
 
 LIBS := $(addprefix $(obj),$(LIBS))
-.PHONY : $(LIBS) $(VERSION_FILE)
+.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 
 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
@@ -295,7 +310,7 @@ $(obj)u-boot.hex:	$(obj)u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 
 $(obj)u-boot.srec:	$(obj)u-boot
-		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
+		$(OBJCOPY) -O srec $< $@
 
 $(obj)u-boot.bin:	$(obj)u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
@@ -344,13 +359,13 @@ $(SUBDIRS):	depend $(obj)include/autoconf.mk
 $(LDSCRIPT):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
-$(NAND_SPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(NAND_SPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
 
 $(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 
-$(ONENAND_IPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(ONENAND_IPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 
 $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
@@ -359,10 +374,13 @@ $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 
 $(VERSION_FILE):
 		@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
-		 '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
-		 ) > $@.tmp
+		 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 
+$(TIMESTAMP_FILE):
+		@date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
+		@date +'#define U_BOOT_TIME "%T"' >> $@
+
 gdbtools:
 		$(MAKE) -C tools/gdb all || exit 1
 
@@ -372,7 +390,7 @@ updater:
 env:
 		$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 
-depend dep:	$(VERSION_FILE)
+depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE)
 		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
 TAG_SUBDIRS += include
@@ -445,7 +463,8 @@ $(obj)include/autoconf.mk: $(obj)include/config.h
 	set -e ; \
 	: Extract the config macros ; \
 	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
-		sed -n -f tools/scripts/define2mk.sed > $@
+		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+	mv $@.tmp $@
 
 sinclude $(obj)include/autoconf.mk.dep
 
@@ -453,7 +472,7 @@ sinclude $(obj)include/autoconf.mk.dep
 else	# !config.mk
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
+$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 dep tags ctags etags cscope $(obj)System.map:
 	@echo "System not configured - see README" >&2
 	@ exit 1
@@ -917,7 +936,7 @@ MBX860T_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 
 mgsuvd_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd
+	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile
 
 MHPC_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
@@ -1059,7 +1078,7 @@ RPXlite_DW_config:	unconfig
 		  $(XECHO) "... with LCD display ..."; \
 		}
 	@[ -z "$(findstring _NVRAM,$@)" ] || \
-		{ echo "#define  CFG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h ; \
+		{ echo "#define  CONFIG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h ; \
 		  $(XECHO) "... with ENV in NVRAM ..."; \
 		}
 	@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
@@ -1201,7 +1220,8 @@ bubinga_config:	unconfig
 CANBT_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
 
-# Canyonlands & Glacier use different U-Boot images
+# Arches, Canyonlands & Glacier use different U-Boot images
+arches_config \
 canyonlands_config \
 glacier_config:	unconfig
 	@mkdir -p $(obj)include
@@ -1242,12 +1262,12 @@ CMS700_config:	unconfig
 CPCI2DP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
 
-CPCI405_config	\
-CPCI4052_config	\
+CPCI405_config		\
+CPCI4052_config		\
 CPCI405DT_config	\
 CPCI405AB_config:	unconfig
+	@mkdir -p $(obj)board/esd/cpci405
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-	@echo "BOARD_REVISION = $(@:_config=)"	>> $(obj)include/config.mk
 
 CPCIISER4_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
@@ -1282,6 +1302,24 @@ ERIC_config:	unconfig
 EXBITGEN_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
 
+fx12mm_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
+		> $(obj)board/avnet/fx12mm/config.tmp
+	@echo "TEXT_BASE := 0xFFCB0000" \
+		>> $(obj)board/avnet/fx12mm/config.tmp
+	@$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+
+fx12mm_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
+		> $(obj)board/avnet/fx12mm/config.tmp
+	@echo "TEXT_BASE := 0x03000000" \
+		>> $(obj)board/avnet/fx12mm/config.tmp
+	@$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+
 G2000_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
 
@@ -1356,16 +1394,26 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
 
-ml507_flash_config:	unconfig
+ml507_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@cp $(obj)board/xilinx/ml507/u-boot-rom.lds  $(obj)board/xilinx/ml507/u-boot.lds
-	@echo "TEXT_BASE = 0xFE360000" > $(obj)board/xilinx/ml507/config.tmp
-	@$(MKCONFIG) $(@:_flash_config=) ppc ppc4xx ml507 xilinx
-
-ml507_config:	unconfig
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
+		> $(obj)board/xilinx/ml507/config.tmp
+	@echo "TEXT_BASE := 0xFE360000" \
+		>> $(obj)board/xilinx/ml507/config.tmp
+	@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+
+ml507_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@cp $(obj)board/xilinx/ml507/u-boot-ram.lds  $(obj)board/xilinx/ml507/u-boot.lds
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml507 xilinx
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
+		> $(obj)board/xilinx/ml507/config.tmp
+	@echo "TEXT_BASE := 0x04000000"  \
+		>> $(obj)board/xilinx/ml507/config.tmp
+	@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+
+neo_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
 
 ocotea_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
@@ -1461,6 +1509,24 @@ taihu_config:	unconfig
 taishan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
 
+v5fx30teval_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
+	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
+		> $(obj)board/avnet/v5fx30teval/config.tmp
+	@echo "TEXT_BASE := 0x03000000" \
+		>> $(obj)board/avnet/v5fx30teval/config.tmp
+	@$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+
+v5fx30teval_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
+	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
+		> $(obj)board/avnet/v5fx30teval/config.tmp
+	@echo "TEXT_BASE := 0xFF1C0000" \
+		>> $(obj)board/avnet/v5fx30teval/config.tmp
+	@$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+
 VOH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
 
@@ -1479,6 +1545,38 @@ sycamore_config: unconfig
 WUH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
 
+xilinx-ppc405-generic_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
+		> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@echo "TEXT_BASE := 0xFE360000" \
+		>> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+
+xilinx-ppc405-generic_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
+		> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@echo "TEXT_BASE := 0x04000000" \
+		>> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+
+xilinx-ppc440-generic_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
+		> $(obj)board/xilinx/ppc440-generic/config.tmp
+	@echo "TEXT_BASE := 0xFE360000" \
+		>> $(obj)board/xilinx/ppc440-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+
+xilinx-ppc440-generic_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
+		> $(obj)board/xilinx/ppc440-generic/config.tmp
+	@echo "TEXT_BASE := 0x04000000" \
+		>> $(obj)board/xilinx/ppc440-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+
 XPEDITE1K_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
 
@@ -1652,12 +1750,12 @@ ISPAN_config		\
 ISPAN_REVB_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _REVB_,$@)" ] ; then \
-		echo "#define CFG_REV_B" > $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
 	fi
 	@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
 
 mgcoge_config	:	unconfig
-	@$(MKCONFIG) mgcoge ppc mpc8260 mgcoge
+	@$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
 
 MPC8260ADS_config	\
 MPC8260ADS_lowboot_config	\
@@ -1679,8 +1777,8 @@ PQ2FADS-ZU_66MHz_lowboot_config	\
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/freescale/mpc8260ads
 	$(if $(findstring PQ2FADS,$@), \
-	@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
-	@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
+	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
+	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
 	$(if $(findstring MHz,$@), \
 	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
 	$(if $(findstring VR,$@), \
@@ -1843,7 +1941,27 @@ ZPC1900_config: unconfig
 ## Coldfire
 #########################################################################
 
-M52277EVB_config:	unconfig
+M52277EVB_config \
+M52277EVB_spansion_config \
+M52277EVB_stmicro_config :	unconfig
+	@case "$@" in \
+	M52277EVB_config)		FLASH=SPANSION;; \
+	M52277EVB_spansion_config)	FLASH=SPANSION;; \
+	M52277EVB_stmicro_config)	FLASH=STMICRO;; \
+	esac; \
+	if [ "$${FLASH}" = "SPANSION" ] ; then \
+		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+		cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
+		$(XECHO) "... with SPANSION boot..." ; \
+	fi; \
+	if [ "$${FLASH}" = "STMICRO" ] ; then \
+		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+		cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
+		$(XECHO) "... with ST Micro boot..." ; \
+	fi
 	@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
 
 M5235EVB_config \
@@ -1903,6 +2021,9 @@ M5275EVB_config :		unconfig
 M5282EVB_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
 
+M53017EVB_config :		unconfig
+	@$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
+
 M5329AFEE_config \
 M5329BFEE_config :	unconfig
 	@case "$@" in \
@@ -1932,19 +2053,19 @@ M54451EVB_stmicro_config :	unconfig
 	M54451EVB_stmicro_config)	FLASH=STMICRO;; \
 	esac; \
 	if [ "$${FLASH}" = "SPANSION" ] ; then \
-		echo "#define CFG_SPANSION_BOOT"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
 		cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
 		$(XECHO) "... with SPANSION boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
-		echo "#define CFG_STMICRO_BOOT"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
 		cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
 		$(XECHO) "... with ST Micro boot..." ; \
 	fi; \
-	echo "#define CFG_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
+	echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
 	@$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
 
 M54455EVB_config \
@@ -1966,25 +2087,25 @@ M54455EVB_stm33_config :	unconfig
 	M54455EVB_stm33_config)		FLASH=STMICRO; FREQ=33333333;; \
 	esac; \
 	if [ "$${FLASH}" = "INTEL" ] ; then \
-		echo "#define CFG_INTEL_BOOT" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		$(XECHO) "... with INTEL boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "ATMEL" ] ; then \
-		echo "#define CFG_ATMEL_BOOT"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_ATMEL_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		$(XECHO) "... with ATMEL boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
-		echo "#define CFG_STMICRO_BOOT"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		$(XECHO) "... with ST Micro boot..." ; \
 	fi; \
-	echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
 	$(XECHO) "... with $${FREQ}Hz input clock"
 	@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
 
@@ -2004,20 +2125,20 @@ M5475GFE_config :	unconfig
 	M5475FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
 	M5475GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
 	esac; \
-	echo "#define CFG_BUSCLK	133333333" > $(obj)include/config.h ; \
-	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
-	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_BUSCLK	133333333" > $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
 	if [ "$${RAM1}" != "0" ] ; then \
-		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${CODE}" != "0" ] ; then \
-		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${VID}" == "1" ] ; then \
-		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${USB}" == "1" ] ; then \
-		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
 	fi
 	@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
 
@@ -2039,20 +2160,20 @@ M5485HFE_config :	unconfig
 	M5485GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
 	M5485HFE_config)	BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
 	esac; \
-	echo "#define CFG_BUSCLK	100000000" > $(obj)include/config.h ; \
-	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
-	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_BUSCLK	100000000" > $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
 	if [ "$${RAM1}" != "0" ] ; then \
-		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${CODE}" != "0" ] ; then \
-		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${VID}" == "1" ] ; then \
-		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${USB}" == "1" ] ; then \
-		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
 	fi
 	@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
 
@@ -2071,11 +2192,11 @@ MPC8313ERDB_NAND_66_config: unconfig
 	@mkdir -p $(obj)board/freescale/mpc8313erdb
 	@if [ "$(findstring _33_,$@)" ] ; then \
 		$(XECHO) -n "...33M ..." ; \
-		echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		$(XECHO) -n "...66M..." ; \
-		echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _NAND_,$@)" ] ; then \
 		$(XECHO) -n "...NAND..." ; \
@@ -2083,6 +2204,9 @@ MPC8313ERDB_NAND_66_config: unconfig
 		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
+	@if [ "$(findstring _NAND_,$@)" ] ; then \
+		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
+	fi ;
 
 MPC8315ERDB_config: unconfig
 	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
@@ -2344,8 +2468,14 @@ TQM8560_config:		unconfig
 MPC8610HPCD_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
 
+MPC8641HPCN_36BIT_config \
 MPC8641HPCN_config:    unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _36BIT_,$@)" ] ; then \
+		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+		$(XECHO) "... enabling 36-bit physical addressing." ; \
+	fi
+	@$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
 
 sbc8641d_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
@@ -2435,15 +2565,6 @@ shannon_config	:	unconfig
 at91rm9200dk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
 
-at91sam9261ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
-
-at91sam9263ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
-
-at91sam9rlek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
-
 cmc_pu2_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
 
@@ -2463,11 +2584,69 @@ mp2usb_config	:	unconfig
 ## Atmel ARM926EJ-S Systems
 #########################################################################
 
+afeb9260_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
+
 at91cap9adk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
 
+at91sam9260ek_nandflash_config \
+at91sam9260ek_dataflash_cs0_config \
+at91sam9260ek_dataflash_cs1_config \
 at91sam9260ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+
+at91sam9261ek_nandflash_config \
+at91sam9261ek_dataflash_cs0_config \
+at91sam9261ek_dataflash_cs3_config \
+at91sam9261ek_config	:	unconfig
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
+
+at91sam9263ek_nandflash_config \
+at91sam9263ek_dataflash_config \
+at91sam9263ek_dataflash_cs0_config \
+at91sam9263ek_config	:	unconfig
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
+
+at91sam9rlek_nandflash_config \
+at91sam9rlek_dataflash_config \
+at91sam9rlek_dataflash_cs0_config \
+at91sam9rlek_config	:	unconfig
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
 
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -2972,11 +3151,6 @@ suzaku_config:	unconfig
 	@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
-xupv2p_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
-
 #========================================================================
 # Blackfin
 #========================================================================
@@ -3029,7 +3203,7 @@ mimc200_config		:	unconfig
 rsk7203_config: unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_RSK7203 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) sh sh2 rsk7203
+	@$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
 
 #########################################################################
 ## sh3 (Renesas SuperH)
@@ -3052,7 +3226,7 @@ ms7720se_config: unconfig
 MigoR_config :       unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
-	@./mkconfig -a $(@:_config=) sh sh4 MigoR
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
 
 ms7750se_config: unconfig
 	@mkdir -p $(obj)include
@@ -3067,27 +3241,27 @@ ms7722se_config :	unconfig
 r2dplus_config  :   unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
 
 r7780mp_config: unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
 
 sh7763rdp_config  :   unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
 
 sh7785lcr_config  :   unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_SH7785LCR 1" >> include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas
 
 ap325rxa_config  :   unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
 
 #========================================================================
 # SPARC
@@ -3148,7 +3322,7 @@ clean:
 	@rm -f $(obj)include/bmp_logo.h
 	@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
 	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
-	@rm -f $(obj)api_examples/demo $(VERSION_FILE)
+	@rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' \
 		-o -name '*.o'	-o -name '*.a'	\) -print \
@@ -3162,7 +3336,7 @@ clobber:	clean
 	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
 		$(obj)cscope.* $(obj)*.*~
 	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
-	@rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
+	@rm -f $(obj)tools/{crc32.c,env_embedded.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
 	@rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h}
 	@rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h}
 	@rm -f $(obj)cpu/mpc824x/bedbug_603e.c