Merge branch 'master' into next

1 files changed, 109 insertions, 30 deletions

diff --git a/Makefile b/Makefile
index 1fe8f70..294efef 100644
--- a/Makefile
+++ b/Makefile
@@ -21,8 +21,8 @@
 # MA 02111-1307 USA
 #
 
-VERSION = 2008
-PATCHLEVEL = 10
+VERSION = 2009
+PATCHLEVEL = 01
 SUBLEVEL =
 EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
@@ -30,6 +30,7 @@ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
 endif
+TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
 HOSTARCH := $(shell uname -m | \
@@ -44,7 +45,12 @@ HOSTARCH := $(shell uname -m | \
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH HOSTOS
+# Set shell to bash if possible, otherwise fall back to sh
+SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	else if [ -x /bin/bash ]; then echo /bin/bash; \
+	else echo sh; fi; fi)
+
+export	HOSTARCH HOSTOS SHELL
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -221,6 +227,8 @@ LIBS += disk/libdisk.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
 LIBS += drivers/dma/libdma.a
+LIBS += drivers/fpga/libfpga.a
+LIBS += drivers/gpio/libgpio.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -230,6 +238,7 @@ LIBS += drivers/mtd/libmtd.a
 LIBS += drivers/mtd/nand/libnand.a
 LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
 LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/ubi/libubi.a
 LIBS += drivers/mtd/spi/libspi_flash.a
 LIBS += drivers/net/libnet.a
 LIBS += drivers/net/phy/libphy.a
@@ -259,7 +268,7 @@ LIBS += api/libapi.a
 LIBS += post/libpost.a
 
 LIBS := $(addprefix $(obj),$(LIBS))
-.PHONY : $(LIBS) $(VERSION_FILE)
+.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 
 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
@@ -339,7 +348,7 @@ $(obj)u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
 $(OBJS):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 
-$(LIBS):	depend $(obj)include/autoconf.mk
+$(LIBS):	depend $(obj)include/autoconf.mk $(SUBDIRS)
 		$(MAKE) -C $(dir $(subst $(obj),,$@))
 
 $(LIBBOARD):	depend $(LIBS) $(obj)include/autoconf.mk
@@ -351,13 +360,13 @@ $(SUBDIRS):	depend $(obj)include/autoconf.mk
 $(LDSCRIPT):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
-$(NAND_SPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(NAND_SPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
 
 $(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 
-$(ONENAND_IPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(ONENAND_IPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 
 $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
@@ -366,10 +375,13 @@ $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 
 $(VERSION_FILE):
 		@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
-		 '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
-		 ) > $@.tmp
+		 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 
+$(TIMESTAMP_FILE):
+		@date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
+		@date +'#define U_BOOT_TIME "%T"' >> $@
+
 gdbtools:
 		$(MAKE) -C tools/gdb all || exit 1
 
@@ -379,7 +391,7 @@ updater:
 env:
 		$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 
-depend dep:	$(VERSION_FILE)
+depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE)
 		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
 TAG_SUBDIRS += include
@@ -396,6 +408,7 @@ TAG_SUBDIRS += disk
 TAG_SUBDIRS += common
 TAG_SUBDIRS += drivers/bios_emulator
 TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/gpio
 TAG_SUBDIRS += drivers/hwmon
 TAG_SUBDIRS += drivers/i2c
 TAG_SUBDIRS += drivers/input
@@ -452,7 +465,8 @@ $(obj)include/autoconf.mk: $(obj)include/config.h
 	set -e ; \
 	: Extract the config macros ; \
 	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
-		sed -n -f tools/scripts/define2mk.sed > $@
+		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+	mv $@.tmp $@
 
 sinclude $(obj)include/autoconf.mk.dep
 
@@ -460,7 +474,7 @@ sinclude $(obj)include/autoconf.mk.dep
 else	# !config.mk
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
+$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 dep tags ctags etags cscope $(obj)System.map:
 	@echo "System not configured - see README" >&2
 	@ exit 1
@@ -1250,14 +1264,11 @@ CMS700_config:	unconfig
 CPCI2DP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
 
-CPCI405_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-
+CPCI405_config		\
 CPCI4052_config		\
 CPCI405DT_config	\
 CPCI405AB_config:	unconfig
 	@mkdir -p $(obj)board/esd/cpci405
-	@echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
 
 CPCIISER4_config:	unconfig
@@ -2455,6 +2466,12 @@ TQM8560_config:		unconfig
 	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
 	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
 
+XPEDITE5200_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+
+XPEDITE5370_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+
 #########################################################################
 ## MPC86xx Systems
 #########################################################################
@@ -2584,17 +2601,84 @@ afeb9260_config:	unconfig
 at91cap9adk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
 
+at91sam9260ek_nandflash_config \
+at91sam9260ek_dataflash_cs0_config \
+at91sam9260ek_dataflash_cs1_config \
 at91sam9260ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+
+at91sam9xeek_nandflash_config \
+at91sam9xeek_dataflash_cs0_config \
+at91sam9xeek_dataflash_cs1_config \
+at91sam9xeek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
 
+at91sam9261ek_nandflash_config \
+at91sam9261ek_dataflash_cs0_config \
+at91sam9261ek_dataflash_cs3_config \
 at91sam9261ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
 
+at91sam9263ek_nandflash_config \
+at91sam9263ek_dataflash_config \
+at91sam9263ek_dataflash_cs0_config \
 at91sam9263ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
 
+at91sam9rlek_nandflash_config \
+at91sam9rlek_dataflash_config \
+at91sam9rlek_dataflash_cs0_config \
 at91sam9rlek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
 
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -3099,11 +3183,6 @@ suzaku_config:	unconfig
 	@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
-xupv2p_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
-
 #========================================================================
 # Blackfin
 #========================================================================
@@ -3154,9 +3233,9 @@ mimc200_config		:	unconfig
 ## sh2 (Renesas SuperH)
 #########################################################################
 rsk7203_config: unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_RSK7203 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) sh sh2 rsk7203 renesas
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h
+	@$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
 
 #########################################################################
 ## sh3 (Renesas SuperH)
@@ -3179,7 +3258,7 @@ ms7720se_config: unconfig
 MigoR_config :       unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
-	@./mkconfig -a $(@:_config=) sh sh4 MigoR renesas
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
 
 ms7750se_config: unconfig
 	@mkdir -p $(obj)include
@@ -3275,7 +3354,7 @@ clean:
 	@rm -f $(obj)include/bmp_logo.h
 	@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
 	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
-	@rm -f $(obj)api_examples/demo $(VERSION_FILE)
+	@rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' \
 		-o -name '*.o'	-o -name '*.a'	\) -print \