diff options
| author | Ben Warren <bwarren@qstreams.com> | 2007-08-13 21:26:03 -0400 |
|---|---|---|
| committer | Ben Warren <bwarren@qstreams.com> | 2007-08-13 21:26:03 -0400 |
| commit | d1bc6c8d5f4a9c7ca9fb2292d5c65f846dcc3995 (patch) | |
| tree | dd0722cee4758fe40f6a5cc75986ebb1a395aac2 /CHANGELOG | |
| parent | f539edc076cfe52bff919dd512ba8d7af0e22092 (diff) | |
| parent | 8a92b7c60b40ff79e2cc96e13aeac2a531dde473 (diff) | |
| download | u-boot-imx-d1bc6c8d5f4a9c7ca9fb2292d5c65f846dcc3995.zip u-boot-imx-d1bc6c8d5f4a9c7ca9fb2292d5c65f846dcc3995.tar.gz u-boot-imx-d1bc6c8d5f4a9c7ca9fb2292d5c65f846dcc3995.tar.bz2 | |
Sync'd u-boot-net with mainline
Merge git://www.denx.de/git/u-boot
Conflicts:
drivers/bcm570x.c
drivers/tigon3.c
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 3870 |
1 files changed, 3870 insertions, 0 deletions
@@ -1,9 +1,3577 @@ +commit a08458303e7f9db67f296980036d3292c35cb45c +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Fri Jun 29 18:38:51 2007 +0200 + + atmel_mci: Fix data timeout value + + Calculate the data timeout based on values from the CSD instead of + just using a hardcoded DTOR value. This is a backport of a similar fix + in BSP 2.0, with one additional fix: the DTOCYC value is rounded up + instead of down. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Mon Aug 13 17:22:31 2007 +0200 + + AVR32: Include <div64.h> instead of <asm/div64.h> + + include/asm-avr32/div64.h was recently moved to include/div64.h, but + cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of + the patch was merged perhaps?) + + This patch updates cpu/at32ap/interrupts.c so that the avr32 port + compiles again. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Wed Jun 27 13:34:26 2007 +0200 + + atmel_mci: Use 512 byte blocksize if possible + + Instead of always using the largest blocksize the card supports, check + if it can support smaller block sizes and use 512 bytes if possible. + Most cards do support this, and other parts of u-boot seem to have + trouble with block sizes different from 512 bytes. + + Also enable underrun/overrun protection. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> + +commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Aug 12 21:34:50 2007 +0200 + + Update CHANGELOG + +commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Aug 12 21:34:34 2007 +0200 + + Minor alignment of output, 2nd try. + Also update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6b309f22a724fad8418e811751a0741b893419cf +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Aug 12 20:35:49 2007 +0200 + + Minor alignment of output + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6f6d7b9c8559e241e8d232621542b8b59699b07b +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Aug 12 18:28:18 2007 +0200 + + Cleanup output on ADS5121 board + + Signed-off-by: Wolfgang Denk + +commit a4d2636f2a859245ed3a401f26189da2dfda4ceb +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Aug 12 15:11:38 2007 +0200 + + Adapt board configuration and fix kernel crash on MCC200 board. + + The update procedure was modified to turn off the USB subsystem + before exit for MCC200 and TRAB. This is necessary as otherwise the + USB controller continues to write periodically to system memory! + + MCC200-specific notes: + - the patch disables the magic key check for MCC200 + - the patch contains the configuration changes made + for the new revision of the board. + + Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Aug 12 14:47:54 2007 +0200 + + Adjust default configuration of ADS5121 board. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Aug 12 14:27:39 2007 +0200 + + Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 5fe6be6208dda852c3564e384bd78d75784dea3e +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Tue Aug 7 21:14:22 2007 -0400 + + Improve error print messages. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 99dffca3b7590a16a00bc475c860b67b2a3f1462 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jul 17 13:57:04 2007 -0500 + + fdt: allow for builds that don't want env and bd_t nodes + + protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the + area. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 91148bf7aeba142d6f348805db7625db7da64d6f +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jul 17 13:56:53 2007 -0500 + + fdt: do board setup based on fdt address specified on bootm line + + The last fdt patch to bootm did board setup based on the address + specified by a prior fdt address command invocation. The bootm + code, as its call to fdt_chosen does, should use the fdt specified + by the user on the bootm command. Note this restores full + functionality for the 8360's existing default boot environment + values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr' + before booting a kernel). + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit e125a2ffc209dd34794e326c7175658253beadf3 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Tue Jul 10 20:40:39 2007 -0400 + + Call ft_board_setup() from the bootm command. + + In the patch titled "Create new fdt boardsetup command..." I removed the + call to ft_board_setup() from the routine fdt_chosen(), but I forgot + to add a direct call back into cmd_bootm.c + + This fixes the oversight by adding the direct call to the bootm command. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Mon Jun 25 23:25:28 2007 -0400 + + Create new fdt boardsetup command, fix bug parsing [] form of set values. + + Previously ft_board_setup() was called by fdt_chosen() which was not + really correctly structured. This splits ft_board_setup() out by creating + a new fdt boardsetup command. + + Fix a bug when parsing fdt set command values which have the square + bracket form [00 11 22 33] - the length was updated incorrectly in when + parsing that form. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 6f35ded9e85493595e0eb66a82b502a95326d049 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Mon Jun 25 20:55:58 2007 -0400 + + Tighten up the error messages. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit c45874b05aae897a6c29d1a97d4bb708fca2756c +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Mon Jun 25 19:52:23 2007 -0400 + + Asthetic improvements: error messages and line lengths. + + Tighten up the error messages, split overlength lines. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Fri May 25 22:08:57 2007 -0400 + + Fix fdt_chosen() to call ft_board_setup(), clean up long lines. + + The fdt_chosen() function was adding/seting some properties ad-hoc + improperly and duplicated (poorly) what was done in ft_board_setup() + + Clean up long lines (setting properties, printing errors). + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 06e19a07701c968f15d72c083b5872a1a11c7b01 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Mon May 21 23:27:16 2007 -0400 + + For fdt_find_node_by_path(), handle the root path properly. + + Also removes the special case root path detection in cmd_fdt.c since it + is no longer necessary. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 9675ee7208ab965d13ea8d8262d77ac4160ef549 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Thu May 17 23:54:36 2007 -0400 + + Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT + + Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 1a861169bc3758f9de3aead62b058736c6891246 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Wed Jun 6 22:47:58 2007 -0400 + + Replace fdt_node_offset() with fdt_find_node_by_path(). + + The new name matches more closely the kernel's name, which is also + a much better description. + + Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit addd8ce83078c25f0eca5f23adbdfc64ca50a243 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Wed May 16 22:39:59 2007 -0400 + + Fix cmd_fdt line lengths, refactor code. + + Break lines that were greater than 80 characters in length. + Move the fdt print and property parsing code to separate static functions + to reduce coding clutter in the fdt_cmd handling body. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 25114033ab21788810c48ba4df103b649da1223b +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat May 12 09:47:25 2007 -0400 + + FDT command improvements. + + Fix "fdt set" so that it will create a non-existing property. + Add "fdt mknode" to create nodes. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 38eb508e8e811e2e57628f445de3a24a23c7d804 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat May 12 09:45:46 2007 -0400 + + Reorganize and fix problems (returns) in the bootm command. + + Do *NOT* return after the "point of no return" has been passed. + If something goes wrong, the board must be reset after that point. + Move the "Transferring control to Linux" debug message back to where it + belongs: just before transferring control to linux. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 89c8757d8f213c47709bdc4efe0695263a6080a6 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Tue May 8 21:27:35 2007 -0400 + + Fix bugs in the CONFIG_OF_LIBFDT + + Stupid coding mistakes (identified by Timur Tabi, thanks). + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Wed Apr 25 22:47:15 2007 -0400 + + Improve fdt move length handling. + + Make the length parameter optional: if not specified, do the move using + the current size unchanged. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Wed Apr 25 22:23:36 2007 -0400 + + Minor code clean up. + + Declare the variable fdt properly as extern. + Call the "set_fn" function pointer the "short way" without the full + dereferencing syntax. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Wed Apr 25 21:24:27 2007 -0400 + + Improve error messages, more informative. + + Print more than the raw libfdt error message strings. This is especially + useful for cluing in the user when the bootm command aborts due to + blob problems. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Fri Apr 20 22:46:53 2007 -0400 + + libfdt: Conditionally compile based on CONFIG_OF_LIBFDT + + This is the way u-boot reduces configured-out code. At Wolfgang + Grandegger and Wolfgang Denk's request, make libfdt conform. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 923efd286411ed052d9e074f59f8986d6081061c +Author: Bruce Adler <bruce.adler@ccpu.com> +Date: Fri Aug 10 14:54:47 2007 -0700 + + add image size and descriptors for Spartan 3E FPGA chips + + Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1) + + Signed-off by: Bruce Adler <bruce.adler@ccpu.com> + +commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Aug 10 15:34:48 2007 -0500 + + make MAKEALL more immune to merge conflicts + + ..by placing board entries one per line, as suggested by jdl. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Aug 10 13:28:25 2007 -0500 + + README: Remove outdated cpu type, board type, and NAME_config lists + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 49bb59912d21aacb507eb81fd21fb7af650c706c +Author: Dave Liu <r63238@freescale.com> +Date: Fri Aug 10 15:48:59 2007 +0800 + + mpc83xx: Suppress the warning 'burstlen' + + suppress the warning 'burstlen' of spd_sdram. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit c2c0ab4aff86622b837a48a0e560351f9afafb95 +Author: Stefan Roese <sr@denx.de> +Date: Fri Aug 10 20:34:58 2007 +0200 + + Conding style cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e +Author: Sergey Kubushyn <ksi@koi8.net> +Date: Fri Aug 10 20:26:18 2007 +0200 + + [ARM] TI DaVinci support, hopefully final + + Add support for the following DaVinci boards: + - DV_EVM + - SCHMOOGIE + - SONATA + + Changes: + + - Split into separate board directories + - Removed changes to MTD_DEBUG (or whatever it's called) + - New CONFIG_CMD party line followed + - Some cosmetic fixes, cleanup etc. + - Patches against the latest U-Boot tree as of now. + - Fixed CONFIG_CMD_NET in net files. + - Fixed CONFIG_CMD_EEPROM for schmoogie. + - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and + DV_EVM. Can't check if it works on SONATA, don't have a board any more, + but it at least compiles. + + Here is an excerpt from session log on SCHMOOGIE... + + U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) + + DRAM: 128 MB + NAND: 128 MiB + In: serial + Out: serial + Err: serial + ARM Clock : 297MHz + DDR Clock : 162MHz + ETH PHY : DP83848 @ 0x01 + U-Boot > iprobe + Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F + U-Boot > ping 192.168.253.10 + host 192.168.253.10 is alive + U-Boot > + + Signed-off-by: Sergey Kubushyn <ksi@koi8.net> + Acked-by: Dirk Behme <dirk.behme@gmail.com> + Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Thu Aug 2 17:42:08 2007 +0200 + + Make use of generic 64bit division in nand_util.c + + Use generic 64bit division in nand_util.c. This makes nand_util.c + independent of any toolchain 64bit division. + + Signed-off-by: Dirk Behme <dirk.behme@gmail.com> + +commit f7c086e94e8ce9aad7268af97f73aa6884686f27 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Thu Aug 2 17:41:14 2007 +0200 + + Move 64bit division from avr32 to generic lib + + Move the 64bit division from lib_avr32 to lib_generic. With this, all + boards can do_div/__div64_32 if needed, not only avr one. Code is put + to lib_generic, so no larger memory footprint if not used. No code + modifications. Thanks for proposal by Håvard Skinnemoen. + + Signed-off-by: Dirk Behme <dirk.behme@gmail.com> + +commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Mon Aug 6 18:18:34 2007 -0500 + + mpc83xx: fix ITX[GP] O=builddir builds + + make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop. + + Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or + "BUILD_DIR=<some dir> ./MAKEALL ..." + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Aug 1 15:00:59 2007 +0800 + + mpc83xx: Correct the README for DDR ECC + + Update the README for DDR ECC, change the name + to README.mpc83xx.ddrecc. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Aug 1 15:00:15 2007 +0800 + + mpc83xx: Consolidate the ECC support of 83xx + + Remove the duplicated source code of ecc command on the <board>.c, + for reused, move these code to cpu/mpc83xx directory. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 036575c544cf1b69654d8fb334bda69c6ff3da36 +Author: Dave Liu <r63238@freescale.com> +Date: Sat Aug 4 13:37:39 2007 +0800 + + mpc83xx: Correct the burst length for DDR2 with 32 bits + + The burst length should be 4 for DDR2 with 32 bits bus + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jul 25 19:25:33 2007 -0500 + + mpc83xx: add support for the MPC8323E RDB + + MPC8323E based board with 64MB fixed SDRAM, 16MB flash, + five 10/100 ethernet ports connected via an ICPlus IP175C + switch, one PCI slot, and serial. Features not supported + in this patch are SD card interface, 2 USB ports, and the + two phone ports. + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jul 25 19:25:28 2007 -0500 + + mpc83xx: fixup generic pci for libfdt + + add libfdt support to the generic 83xx pci code + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit f57ac7a7b37109245b69db80839ebee26179966a +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jul 25 19:25:22 2007 -0500 + + mpc83xx: fix 8360 and cpu functions to update fdt being passed + + ..and not the global fdt. Rename local fdt vars to blob so as not to + be confused with the global var with the same three-letter name. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 8be404459a6b7395415a57bb35e8377e3b2b5acb +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Wed Jul 4 21:34:24 2007 -0400 + + mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled + + Several node strings were not correct (trailing slashes and properties + in the strings) + Added setting of the timebase-frequency. + Improved error messages and use debug() instead of printf(). + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 26d02c9bbac1751c5e19294f000100b48d43a920 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Wed Jul 4 21:27:30 2007 -0400 + + mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path(). + + The new name matches more closely the kernel's name, which is also + a much better description. + + These are the mpc83xx changes made necessary by the function name change. + + Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 9be39a67c9f8fef7107f5df09d673005f04d0963 +Author: Dave Liu <daveliu@freescale.com> +Date: Mon Jun 25 10:41:56 2007 +0800 + + mpc83xx: Add support for the display of reset status + + 83xx processor family has many reset sources, such as + power on reset, software hard reset, software soft reset, + JTAG, bus monitor, software watchdog, check stop reset, + external hard reset, external software reset. + sometimes, to figure out the fault of system, we need to + know the cause of reset early before the prompt of + u-boot present. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d +Author: Dave Liu <daveliu@freescale.com> +Date: Mon Jun 25 10:41:04 2007 +0800 + + mpc83xx: Fix the align bug of SDMA buffer + + According to the latest user manual, the SDMA temporary + buffer base address must be 4KB aligned. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476 +Author: Dave Liu <daveliu@freescale.com> +Date: Mon Jun 25 13:21:12 2007 +0800 + + mpc83xx: Revise the MPC8360EMDS readme doc + + When the rev2.x silicon mount on the MPC8360EMDS baord, + and if you are using the u-boot version after the commit + 3fc0bd159103b536e1c54c6f4457a09b3aba66ca. + to make the ethernet interface usable, we have to setup + the jumpers correctly. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c +Author: Timur Tabi <timur@freescale.com> +Date: Tue Jul 3 13:46:32 2007 -0500 + + FSL I2C driver programs the two I2C busses differently + + The i2c_init() function in fsl_i2c.c programs the two I2C busses differently. + The second I2C bus has its slave address programmed incorrectly and is + missing a 5-us delay. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit df33f6b4d6d63693dd9200808b242de1b86cb8e8 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Jul 3 13:04:34 2007 -0500 + + Update SCCR programming in cpu_init_f() to support all 83xx processors + + Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the + bitfields for all 83xx processors. The code to update some bitfields was + compiled only on some processors. Now, the bitfields are programmed as long + as the corresponding CFG_SCCR option is defined in the board header file. + This means that the board header file should not define any CFG_SCCR macros + for bitfields that don't exist on that processor, otherwise the SCCR will be + programmed incorrectly. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 9546266999f0b9b51372636614211b88d90f0f25 +Author: Martin Krause <martin.krause@tqs.de> +Date: Fri Jun 22 13:04:22 2007 +0200 + + TQM834x: cleanup configuraton + + Remove irritating #undef DEBUG + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc +Author: david.saada <David.Saada@ecitele.com> +Date: Mon Jun 18 09:09:53 2007 -0700 + + MPC83xx: Fix makefile to generate config.h file in the build directory + + MPC83xx: Fix the Makefile config sections to generate the include/config.h + file in the build directory instead of the source directory. + + Signed-off-by: David Saada <david.saada@ecitele.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 1ded0242e437259366792d52b7e9d1e1931d8fa5 +Author: Lee Nipper <Lee.Nipper@freescale.com> +Date: Thu Jun 14 20:07:33 2007 -0500 + + mpc83xx: Add support for 8360 silicon revision 2.1 + + This change adds 8360 silicon revision 2.1 support to u-boot. + + Signed-off-by: Lee Nipper <lee.nipper@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Aug 8 04:14:28 2007 -0500 + + Treat ppc64 host as ppc + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0dc4279b08ff82472bec2e2c90858602459febe8 +Author: Jason Jin <Jason.jin@freescale.com> +Date: Wed Aug 8 09:01:46 2007 +0800 + + Minor fix for bios emulator makefile + + Add $(obj) to LIB avoiding objects be built in the source dir + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + +commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6 +Author: Jason Jin <Jason.jin@freescale.com> +Date: Wed Aug 8 08:33:11 2007 +0800 + + Add CONFIG_BIOSEMU define to guard all the bios emulator code + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + + This patch fix the compile issue on the board that did not enable the bios emulator + +commit ed8106433522f2ea8933e9808346860d061d7731 +Author: Zach Sadecki <Zach.Sadecki@ripcode.com> +Date: Tue Jul 31 12:27:25 2007 -0500 + + tsec: fix multiple PHY support + + The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx" + broke multiple PHY support in tsec.c. This fixes it. + + Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede +Author: Joe Hamman <joe.hamman@embeddedspecialties.com> +Date: Thu Aug 9 09:08:18 2007 -0500 + + tsec: Allow Ten Bit Interface address to be configurable + + Allow the address of the Ten Bit Interface (TBI) to be changed in the + event of a conflict with another device. + + Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> + +commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c +Author: Jason Jin <Jason.jin@freescale.com> +Date: Tue Aug 7 16:17:06 2007 +0800 + + Add CONFIG_BIOSEMU define to guard all the bios emulator code + + This patch fix the compile issue on the board that did not enable the bios emulator + +commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Aug 7 16:02:13 2007 +0200 + + Fix missing brace error in fs/fat/fat.c + [pointed out by Roderik Wildenburg] + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6c33c78557ca6f8da68c01ce33e278695197d3f4 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Aug 6 23:21:05 2007 +0200 + + Fixed typo in README (pointed out by Martin Jost). + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 9c7e4b06214db61bb21f1bcbe57c97519669baae +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Aug 6 02:17:36 2007 +0200 + + Coding style cleanup. Update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 221838cc7eb178370ff62aa05920a582e12ac322 +Author: Jason Jin <Jason.jin@freescale.com> +Date: Tue Jul 10 09:03:22 2007 +0800 + + Remove the bios emulator from MAI board. + + The bios emulator in the MAI board can not pass compile + and have a lot of crap in it. remove it and will have a + clean and small bios emulator in the drivers directory + which can be uesed for every board. + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + +commit 5618332409bb96f4448d1712899369fc80c0b489 +Author: Jason Jin <Jason.jin@freescale.com> +Date: Fri Jul 13 12:14:59 2007 +0800 + + Fix some compile issues for MAI board. + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + +commit 0f460a1ee148b648ee242c3157650287d4296260 +Author: Jason Jin <Jason.jin@freescale.com> +Date: Fri Jul 13 12:14:58 2007 +0800 + + Configurations for ATI video card BIOS emulator + + This patch add definition of the BIOS emulator and the ATI framebuffer + driver for MPC8641HPCN board. + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + +commit ece92f85053b8df613edcf05b26a416cbc3d629c +Author: Jason Jin <Jason.jin@freescale.com> +Date: Fri Jul 6 08:34:56 2007 +0800 + + This is a BIOS emulator, porting from SciTech for u-boot, mainly for + ATI video card BIOS. and can be used for x86 code emulation by some + modifications. + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + +commit 5072188acabde3178fac7f5a597150e6e74fd40c +Author: Jason Jin <Jason.jin@freescale.com> +Date: Fri Jul 6 08:33:33 2007 +0800 + + This is a framebuffer driver for ATI video card, can work for PCI9200, + X300, X700, X800 ATI video cards. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + +commit 5728be389e65fd47f34b33c2596271eb4db751ae +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Aug 6 01:01:49 2007 +0200 + + Coding style cleanup. Update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 8092fef4c29b395958bb649647da7e3775731517 +Author: Martin Krause <Martin.Krause@tqs.de> +Date: Tue Dec 12 14:26:01 2006 +0100 + + Add functions to list of exported functions + + Additionally export the following fuctions (to make trab_config build again): + - simple_strtol() + - strcmp() + + Also bump the ABI version to reflect this change + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + +commit 63cec5814fab5d2b1c86982327433807a5ac0249 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Thu Aug 2 14:09:49 2007 -0500 + + Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts. + + All of the PCI/PCI-Express driver and initialization code that + was in the MPC8641HPCN port has now been moved into the common + drivers/fsl_pci_init.c. In a subsequent patch, this will be + utilized by the 85xx ports as well. + + Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. + + Also enable the second PCI-Express controller on 8641 + by getting its BATS and CFG_ setup right. + + Fixed a u16 vendor compiler warning in AHCI driver too. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 86b116b1b1e165ca4840daefed36d2e3b8460173 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Aug 3 12:08:16 2007 +0200 + + cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. + + Add the ability for modules from the Schindler cm5200 family to use a + single U-Boot image: + - rename cm1_qp1 to cm5200 + - add run-time module detection + - parametrize SDRAM configuration according to the module we are running on + + Few minor, board-specific fixes included in this patch: + - better MAC address handling + - updated default environment ('update' command uses +{filesize} now) + - improved error messages in the auto-update code + - allow booting U-Boot from RAM (CFG_RAMBOOT) + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779 +Author: Andy Fleming <afleming@freescale.com> +Date: Fri Aug 3 04:05:25 2007 -0500 + + Add Marvell 1149 PHY support to the TSEC + +commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Aug 2 21:27:46 2007 +0200 + + Coding style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 63e22764d2f8653f68888c667eb65b3996b52680 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Aug 2 10:11:18 2007 +0200 + + Minor cleanup of <board>_nand build rules. + +commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Aug 2 00:48:45 2007 +0200 + + Fix build errors and warnings / code cleanup. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Fri Jul 27 14:43:59 2007 +0200 + + [ADS5121] Support for the ADS5121 board + + The following MPC5121e subsystems are supported: + + - low-level CPU init + - NOR Boot Flash (common CFI driver) + - DDR SDRAM + - FEC + - I2C + - Watchdog + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + Signed-off-by: Jan Wrobel <wrr@semihalf.com> + +commit 1863cfb7b100ba0ee3401799457a01dc058745f8 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Fri Jul 27 14:22:04 2007 +0200 + + [PPC] Remove unused MSR_USER definition + + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + +commit cc3023b9f95d7ac959a764471a65001062aecf41 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Thu Jul 19 17:12:28 2007 +0200 + + Fix breakage of 8xx boards from recent commit. + + This patch fixes the negative consequences for 8xx of the recent + "ppc4xx: Clean up 440 exceptions handling" commit. + + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + +commit 3a6cab844cf74f76639d795e0be8717e02c86af7 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat Jul 14 22:51:02 2007 +0200 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 011595307731a7a67a7445d107c279d031e8ab97 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Sat Jul 14 01:06:58 2007 +0200 + + [PCS440EP] - fix compile error, if BUILD_DIR is used + +commit fad63407154f46246ce80d53a9c669a44362ac67 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Fri Jul 13 09:54:17 2007 +0200 + + make show_boot_progress () weak. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 907902472391b6ca1876ec300687562ecaf459b1 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Fri Jul 13 08:26:05 2007 +0200 + + [PCS440EP] - The DIAG LEDs are now blinking, if an error occur + - fix compile error, if BUILD_DIR is used + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 12 01:45:34 2007 +0200 + + Update CHANGELOG, minor coding style cleanup. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654 +Author: Andy Fleming <afleming@freescale.com> +Date: Fri Jun 8 16:41:18 2007 -0500 + + Remove erroneous errata code from Marvel 88E1111S driver + + The Marvel 88E1111S driver for the TSEC was copied from the + 88E1101 driver, and included a fix for an erratum which does not + exist on that part. Now it is removed + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 982efcf23fd03647e01e2fbe28a7a36239156cc0 +Author: Andy Fleming <afleming@freescale.com> +Date: Tue Jun 5 16:38:44 2007 -0500 + + From: eran liberty <eran.liberty@gmail.com> + + adds the reset register to 85xx immap + + Signed-off-by: Eran Liberty <eran.liberty@gmail.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7 +Author: Andy Fleming <afleming@freescale.com> +Date: Thu May 10 17:50:01 2007 -0500 + + Polished the 85xx ADS config files + + Made the boot commands use device trees by default. + Also moved the ramdisk to 1000000 (I think the previous address + was getting overridden during boot). + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed May 9 11:03:32 2007 -0500 + + 8544ds: Fix Makefile after moving pixis to board/freescale. + + The OBJTREE != SRCTREE build scenario was broken. + This fixes it. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e +Author: Andy Fleming <afleming@freescale.com> +Date: Wed May 9 00:54:20 2007 -0500 + + tsec: Fix PHY code to match first driver + + Jarrold Wen noticed that the generic PHY code always matches + under the current implementation. Change it so the first match + wins, and *only* unknown PHYs trigger the generic driver + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit ccc091aac61a38cd998d575d92f7232e256d6312 +Author: Andy Fleming <afleming@freescale.com> +Date: Tue May 8 17:27:43 2007 -0500 + + Add support for CPM device tree configuration to 8560 ADS + + * Adds code to modify CPM frequencies + * Cleans up the config file to #define TSEC and (for now) #undef FCC + * Adds the MII command for all 8560 ADS configurations + * Updates config file to provide convenience commands for booting + with a device tree + + Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9 +Author: Andy Fleming <afleming@freescale.com> +Date: Tue May 8 17:23:02 2007 -0500 + + Fix Marvell 88e1145 PHY init code + + Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver + where the reset was being done after the errata code instead of + before. + + Signed-off-by: Haiying Wang <haiying.wang@freescale.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 5dc210dec5bace98a50b6ba905347890091a9bb0 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Jul 11 14:52:16 2007 -0500 + + Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit e8b85f3ba4cd8930e0a2fea2100c815d64201765 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Jul 11 14:52:08 2007 -0500 + + pciauto setup bridge + + The P2P bridge bus numbers programmed into the device are relative to + hose->first_busno. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit 571f49fa717004ca4268b4e24057efc7bf9f987b +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Jul 11 14:52:01 2007 -0500 + + Support PCIe extended config registers + + FSL PCIe block has extended cfg registers in the 100 and 400 range. + For example, to read the LTSSM register: pci display <busn>.0 404 1 + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit ba5feb12581bb2912ce301e4866b71f846e9fc07 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Jul 11 14:51:48 2007 -0500 + + Minor improvements to drivers/pci_auto.c + + - Make pciauto_{pre,post}scan_setup_bridge non-static + - Added physical address display in debug messages. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit 40e81addab7bb74d20ddf681ce9babc880a828ee +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Jul 11 14:51:35 2007 -0500 + + Start pci hose scan from hose->current_busno. + + Ensure hose->current_busno is not less than first_busno. This fixes + broken board code which leaves current_busno=0 when first_busno is + greater than 0 for the cases with multiple controllers. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit 3865b1fb7843a08ad49a6319a36415752276ff48 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jul 11 12:13:53 2007 +0200 + + Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit fa1df308926a6f70e3504c57514ef27ac31fd13a +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Jul 11 20:11:07 2007 +0200 + + CM1.QP1: Support for the Schindler CM1.QP1 board. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 96e1d75be8193ca79e4215a368bf9d7f2362450f +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Wed Jul 11 18:39:11 2007 +0200 + + [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed + - now the Flash ST M29W040B is supported (not tested) + - fix the "led" command + - fix compile error, if BUILD_DIR is used + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5 +Author: Stefan Roese <sr@denx.de> +Date: Sun Jul 8 13:44:27 2007 +0200 + + Fix malloc problem introduced with the relocation fixup for the PPC platform + + The relocation fixup didn't handle the malloc pointer initialization + correctly. This patch fixes this problem. Tested successfully on 4xx. + The relocation fixup patches for 4xx will follow soon. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 11:19:50 2007 -0500 + + disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols. + + Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. + Those always evaluated TRUE, and thus were always compiled + even when IDE really wasn't defined/wanted. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit ddb5d86f0215bcb6c293510c50eb050e92883b7a +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 11:13:21 2007 -0500 + + drivers/: Remove lingering references to CFG_CMD_* symbols. + + Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. + Those always evaluated TRUE, and thus were always compiled + even when IDE really wasn't defined/wanted. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit f40a7f3e3888b42a43674b099e5470022c8c544c +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 11:07:56 2007 -0500 + + fs/: Remove lingering references to CFG_CMD_* symbols. + + Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. + Those always evaluated TRUE, and thus were always compiled + even when IDE really wasn't defined/wanted. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 11:05:02 2007 -0500 + + net/: Remove lingering references to CFG_CMD_* symbols. + + Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. + Those always evaluated TRUE, and thus were always compiled + even when IDE really wasn't defined/wanted. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 902531788376046da212afd1661cffb62f3daa1c +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 11:02:44 2007 -0500 + + common/: Remove lingering references to CFG_CMD_* symbols. + + Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. + Those always evaluated TRUE, and thus were always compiled + even when IDE really wasn't defined/wanted. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit d39b57415838c73fb0a37eca84de3c68ba990586 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 10:48:22 2007 -0500 + + board/[j-z]*: Remove lingering references to CFG_CMD_* symbols. + + Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. + Those always evaluated TRUE, and thus were always compiled + even when IDE really wasn't defined/wanted. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 77a318545d57aefa844752465b94c7e09a3f26d0 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 10:39:10 2007 -0500 + + board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols. + + Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. + Those always evaluated TRUE, and thus were always compiled + even when IDE really wasn't defined/wanted. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 10:27:39 2007 -0500 + + cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 079a136c3588814784561d6e4856970ee82d6e2a +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 10:12:10 2007 -0500 + + include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*. + + Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h + used to be included but CONFIG_BOOTP_MASK was not defined. + + Remove lingering references to CFG_CMD_* symbols. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 09:38:02 2007 -0500 + + include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*. + + Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h + used to be included but CONFIG_BOOTP_MASK was not defined. + + Remove lingering references to CFG_CMD_* symbols. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 80ff4f99b84b64edca3fd10da365ec1493be1c95 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 09:29:01 2007 -0500 + + include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*. + + Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h + used to be included but CONFIG_BOOTP_MASK was not defined. + + Remove lingering references to CFG_CMD_* symbols. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 09:22:23 2007 -0500 + + include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*. + + Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h + used to be included but CONFIG_BOOTP_MASK was not defined. + + Remove lingering references to CFG_CMD_* symbols. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 659e2f6736232a08acca8785c206e2b4d9cd07d7 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 09:10:49 2007 -0500 + + include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*. + + Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h + used to be included but CONFIG_BOOTP_MASK was not defined. + + Remove lingering references to CFG_CMD_* symbols. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jul 10 09:02:57 2007 -0500 + + include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*. + + Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h + used to be included but CONFIG_BOOTP_MASK was not defined. + + Remove lingering references to CFG_CMD_* symbols. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 22:08:34 2007 -0500 + + Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK! + + All of the choices for CONFIG_BOOTP_ are now documented in + the README file. You must now individually select exactly + the set that you want using a series of + #define CONFIG_BOOTP_<x> + statements in the board port config files now. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit d3b8c1a743dcd31625c99e6a44590f207eb00028 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 21:57:31 2007 -0500 + + include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 2fd90ce575b02d189cbf443c85309bcd001aa393 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 21:48:26 2007 -0500 + + include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 37d4bb70586659dedef1658ce1bed071be098aec +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 21:38:02 2007 -0500 + + include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 18225e8dd1950bd6dbf35011e436db7f474c187d +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 21:31:24 2007 -0500 + + include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 21:24:19 2007 -0500 + + include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 21:16:53 2007 -0500 + + include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 19:12:30 2007 -0500 + + Retire CONFIG_COMMANDS finally. + Strip old CFG_CMD_* symbols out. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b5501f7d720fed99ab0b42c83f5dea52868ce007 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 19:10:03 2007 -0500 + + Update README.* to reference new CONFIG_CMD_* names now. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 19:06:00 2007 -0500 + + cpu/m*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:57:22 2007 -0500 + + cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit ab3abcbabd840928fb1eb5122118ca466b5e5013 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:45:16 2007 -0500 + + board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:38:39 2007 -0500 + + board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit c508a4cefd8a953fc64957650506a035e6e3d9d1 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:31:28 2007 -0500 + + board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b9307262f8a9f3b5c9e15a6067eadc17407146f6 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:24:55 2007 -0500 + + board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit fcec2eb93e126400009729328e797f12bc94f1fd +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:19:09 2007 -0500 + + board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit a593814f2be0c9cdc3133cd550b167b8a988328f +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:10:50 2007 -0500 + + rtc/: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 67350568f9d46e66c21829f3513b3db0caeb948b +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:05:38 2007 -0500 + + lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 7def6b34f910f08d7ef0a14646da067719237ca2 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 18:02:11 2007 -0500 + + lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 17:56:50 2007 -0500 + + fs/: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit c91898bbc505aff3e12a807af88e76da18efb7ee +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 17:46:09 2007 -0500 + + tools/: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 17:45:14 2007 -0500 + + net/: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit cb51c0bf88f95a1bca68324b0126f8eed8b43273 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 17:39:42 2007 -0500 + + drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 17:30:01 2007 -0500 + + drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29 +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 17:22:37 2007 -0500 + + disk/: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 639221c76c88215bd55af83ad174fc30d1940f8f +Author: Jon Loeliger <jdl@freescale.com> +Date: Mon Jul 9 17:15:49 2007 -0500 + + include/: Remove obsolete references to CONFIG_COMMANDS + Mostly removed from comments here. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Jul 10 00:01:28 2007 +0200 + + Coding style cleanup; update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit c3517f919d0f61650cf3027fd4faf0f631142f6c +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 18:10:08 2007 -0500 + + common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 18:05:39 2007 -0500 + + common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit c76fe47425afc7d5d670ff0539823c85d65d9c42 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 18:02:23 2007 -0500 + + common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit baa26db4113679b80970ff447d91cc10217742a6 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 17:51:39 2007 -0500 + + common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 17:02:01 2007 -0500 + + Clear up confusion over the CMD_POST and POST_DIAG mess. + + For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG + when it really means just CONFIG_CMD_DIAG. There is no CMD_POST. + Clear this mess up some. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b3631487105a57ab7cbadfc26efbaf9676275018 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 15:45:08 2007 -0500 + + Remove references to the old cmd_confdefs.h include file. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 15:42:59 2007 -0500 + + include/configs: Catch some CONFIG_CMD_* conversion stragglers. + + Use new CONFIG_CMD_* in lwmon5.h board config file. + Fix CONFIG_CMD_* typo braindamage in omap1510inn.h + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit a5562901661bd428f7e5feb333f796372cb81019 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 15:31:57 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 15:02:44 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various S* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit e9a0f8f15c11f337967aa0600ad6e8af33037f50 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 15:12:40 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various R* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 14:55:07 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various Q* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 14:49:44 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various P* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit e18a1061a8630cb67995fdf99afd3fb50d1b187d +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 14:21:43 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 14:14:17 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various M* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 348f258f24253433e4a2302a0bbceb6740a67246 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 13:46:18 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a +Author: Jon Loeliger <jdl@freescale.com> +Date: Sun Jul 8 10:09:35 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various H* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 60a0876b5106b34220e459c208bbf648073306c0 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sat Jul 7 21:04:26 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit dcaa71562826a2466e894c868d132509dcda8444 +Author: Jon Loeliger <jdl@freescale.com> +Date: Sat Jul 7 20:56:05 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various E* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 3c3227f3c737502311b25b72084573901cbbf17d +Author: Jon Loeliger <jdl@freescale.com> +Date: Sat Jul 7 20:40:43 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various D* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c +Author: Jon Loeliger <jdl@freescale.com> +Date: Thu Jul 5 19:52:35 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various C* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit de8b2a6e33298dcdb10bdda48db25e53c3089eba +Author: Jon Loeliger <jdl@freescale.com> +Date: Thu Jul 5 19:32:07 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various B* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 498ff9a228485bd4b9f23d066bada268f9add1dd +Author: Jon Loeliger <jdl@freescale.com> +Date: Thu Jul 5 19:13:52 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various A* named board config files. + + Since ADS860.h includes "board/fads/fads.h" with ramifications + on the CONFIG_COMMAND treatment, it too has to be adjusted to + exclude already configured commands in this same commit. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e +Author: Stefan Roese <sr@denx.de> +Date: Fri Jul 6 09:45:47 2007 +0200 + + Fix problem with get/setdcr commands introduced by cfg patches + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 6 02:50:19 2007 +0200 + + Code cleanup and default config update for STC GP3 SSA board. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit e4dbe1b215f5c6c462e76909d240bd96472b84de +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 5 17:56:27 2007 +0200 + + Fixing some typos etc. introduced mainly by cfg patches. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 5 11:12:16 2007 +0200 + + Minor coding style cleanup. Update CHANGELOG. + +commit dca3b3d6d6396b67e5e84af53452164923c73443 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:33:46 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:33:38 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:33:30 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various s* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:33:23 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 26a34560d56a9df5bc2ae23525d9229736134757 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:33:17 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various p* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit a5cb23092a7d31490a33d4ec871468b63babfa3c +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:33:13 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various o* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 929a2bfd142737003a8fc32e1b86e1f2c1850257 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:33:07 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various n* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5dc11a511960d490f7f01ffd746edfe6277f99b0 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:33:01 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various m* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:32:57 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various l* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit bc234c129fa04fb9fa33530930e5cbc6084cd47a +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:32:51 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:32:32 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various i* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 48d5d102a2f2e619c92050b9aedbb69689185bc0 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:32:25 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various h* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:32:19 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various g* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:32:10 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various e* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:32:03 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various d* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:31:56 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various c* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:31:49 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various b* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 0b361c916617aff79e647b40f0e43361e0bbaccf +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:31:42 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various a* named board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b730cda82e362df6a22f4c59c0a9b97e885b1014 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:31:35 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in mpc5xx board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit d794cfefead5fc177cf4f41164e80382e9c9484a +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:31:15 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in various 5200 board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:31:07 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in STx board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:30:58 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in sbc* board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 2694690e285acaa34922f55f4b5ae030da60c55a +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:30:50 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in TQM board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 1cc4c458329765b58e584a19821e796b3c10e976 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:30:28 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in 82xx board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jul 4 22:30:06 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in 83xx board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b44896215a09c60fa40cae906f7ed207bbc2c492 +Author: Sergei Poselenov <sposelenov@emcraft.com> +Date: Thu Jul 5 08:17:37 2007 +0200 + + Merged POST framework with the current TOT. + + Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> + +commit b24629fa377214d63bb40d1360e354b6d3e4af56 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jun 13 13:23:15 2007 -0500 + + mpc86xx: Remove old CFG_CMD_* references. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jun 13 13:22:54 2007 -0500 + + Add MPC8568MDS to MAKEALL 85xx target. + + It was missing from the original port submission. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 2835e518c969e5124ba1174eef3e8375e12fa7d5 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jun 13 13:22:08 2007 -0500 + + include/configs: Use new CONFIG_CMD_* in 85xx board config files. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 56b304ac2091689506088a9ae67f63fd6300cf16 +Author: Jon Loeliger <jdl@jdl.com> +Date: Wed Jun 13 13:21:37 2007 -0500 + + Fix #if typo in CONFIG_CMD_* changes. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit f780b83316d9af1f61d71cc88b1917b387b9b995 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Wed Jun 27 18:11:38 2007 +0200 + + resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + +commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jul 4 10:06:30 2007 +0200 + + ppc4xx: Update lwmon5 board + + - Add optional ECC generation routine to preserve existing + RAM values. This is needed for the Linux log-buffer support + - Add optional DDR2 setup with CL=4 + - GPIO50 not used anymore + - Lime register setup added + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6810a34677dbc446334f5e451f1682426dd33b49 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:17:28 2007 -0600 + + Fix Makefile to use $(MKCONFIG) macro for all board ports + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:17:28 2007 -0600 + + Fix Makefile to use $(MKCONFIG) macro for all board ports + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 057004f4a4863554d56cc56268bfa7c7d9738e27 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:49 2007 -0600 + + Correct fixup relocation for mpc83xx + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:44 2007 -0600 + + Correct fixup relocation for mpc8260 + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit f3a52fe05923935db86985daf9438e2f70ac39aa +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:39 2007 -0600 + + Correct fixup relocation for mpc824x + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:34 2007 -0600 + + Correct fixup relocation for mpc8220 + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:29 2007 -0600 + + Correct fixup relocation for MPC5xxx + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 3649cd99ba815b6601868735765602f00ef3692b +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:24 2007 -0600 + + Correct relocation fixup for mpc5xx + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:19 2007 -0600 + + Don't set gd->reloc_off if relocation of .fixup works correctly + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:14 2007 -0600 + + Remove obsolete mpc83xx linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:09 2007 -0600 + + Consolidate mpc8260 linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:34:04 2007 -0600 + + Remove obsolete mpc824x linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit f94a3aecebc40ca0939c7d66d010009cf51be9e2 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:59 2007 -0600 + + Remove obsolete mpc824x linker scripts (3 of 4) + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit a71c084f3ac7fedf144537db2b2da47323068833 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:53 2007 -0600 + + Remove obsolete mpc824x linker scripts (2 of 4) + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit f670a15468d1365241d40022b9408e1004181f5e +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:48 2007 -0600 + + Remove obsolete mpc824x linker scripts (1 of 4) + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 09555bd45a04c0e54f172528d21bc18896550d28 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:43 2007 -0600 + + Remove obsolete mpc8220 linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 5efb992f046e51225c93d52f80fecbe433abd789 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:38 2007 -0600 + + Remove obsolete mpc5xxx linker scripts (3 of 3) + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 07c13dfef65b31647e69d8b61daa1eec598add1a +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:33 2007 -0600 + + Remove obsolete mpc5xxx linker scripts (2 of 3) + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit b4f67513a624ce85866c66c575bd2d9d7977d7f0 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:28 2007 -0600 + + Remove obsolete mpc5xxx linker scripts (1 of 3) + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit b7d8e05f8675249b5f208aa73babeed384a4519d +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:23 2007 -0600 + + Remove obsolete mpc5xx linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:18 2007 -0600 + + Consolidate mpc83xx linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:13 2007 -0600 + + Consolidate mpc8260 linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:08 2007 -0600 + + Consolidate mpc824x linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 9c757b789a59a855db57b448dd825329c4e9c4a0 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:33:03 2007 -0600 + + Consolidate mpc8220 linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit d181c9a15cd41863fe24840d17848429f27d3c8c +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:32:58 2007 -0600 + + Consolidate mpc5xxx linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 287ac924adb7291bebe5086652a362a30ab28b13 +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Tue Jul 3 00:32:53 2007 -0600 + + Consolidate mpc5xx linker scripts + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jul 4 00:43:53 2007 +0200 + + Fix a few file permission problems. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jul 4 00:38:38 2007 +0200 + + Minor coding style cleanup. Rebuild CHANGELOG file. + +commit 2f9c19e496acb6bb50d9299e1aab377625d48c38 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:44 2007 -0500 + + configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 602ad3b33d9ceef83dbab46be68646d645d637ee +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:39 2007 -0500 + + README: Rewrite command line config to use CONFIG_CMD_* names. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 72a074cec68e5bad60d63206c050974e08afd804 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:34 2007 -0500 + + include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:28 2007 -0500 + + tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 9107ebe0d352420895ab69b715697bdebc8caf50 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:23 2007 -0500 + + board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5e378003d592ea828ec69d6defcd4de79096dd5c +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:19 2007 -0500 + + board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 737184114ec9c9e0ab94d6713536126073bd2472 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:15 2007 -0500 + + cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit f48070fe5fe440dfb5ee5268c920de70e48ea327 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:08 2007 -0500 + + cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:03:03 2007 -0500 + + lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 73f032021ec5f13cda8faa4e34b6de80960eb86f +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:02:58 2007 -0500 + + lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 98b79003c21c2578206003256de4e781d6b36ca8 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:02:53 2007 -0500 + + rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 6e2115acb6a892d53a6881bf253ae41d3df39156 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:02:49 2007 -0500 + + net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 45cdb9b72c94655c7308b464a2666057c0b286e0 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:02:34 2007 -0500 + + disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:02:20 2007 -0500 + + fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit d5be43de93ff905c465e509d45a3164ef48d26e7 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:02:10 2007 -0500 + + drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b453960d4fdb87b3970d96119b90df2ed024fc4a +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:02:05 2007 -0500 + + common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:01:54 2007 -0500 + + common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit a76adc8142c1d956385a109e0b70f9319ede4d66 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:01:43 2007 -0500 + + common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). + + This is a compatibility step that allows both the older form + and the new form to co-exist for a while until the older can + be removed entirely. + + All transformations are of the form: + Before: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) + After: + #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1 +Author: Jon Loeliger <jdl@jdl.com> +Date: Mon Jun 11 19:01:34 2007 -0500 + + Introduce initial versions of new Command Config files. + + Derive three new files from cmd_confdefs.h: + config_bootp.h - Has BOOTP related config options, not commands + config_cmd_all.h - Has a CONFIG_CMD_* definition for every command + config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds. + + For now, include "config_bootp.h" for compatability until all + users of it directly include it properly. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 1f2a05898658900dc5717761e27abf2052e67e13 +Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in> +Date: Sat Jun 30 18:50:48 2007 +0200 + + Fix S-ATA support. + + Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in> + +commit a5d71e290f3673269be8eefb4ec44f53412f9461 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Mon Jun 25 19:11:37 2007 +0200 + + [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b +Author: Niklaus Giger <niklaus.giger@nestal.com> +Date: Mon Jun 25 17:03:13 2007 +0200 + + ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt + + This patch prints the DDR status registers upon machine check + interrupt on the 440EPx/GRx. This can be useful especially when + ECC support is enabled. + + I added some small changes to the original patch from Niklaus to + make it compile clean. + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 807018fb7faceb429ce0cb47baa2073746b33a4e +Author: Niklaus Giger <niklaus.giger@nestal.com> +Date: Mon Jun 25 16:50:55 2007 +0200 + + ppc4xx: Fix O=buildir builds + + This patch fixes the problem to assemble cpu/ppc4xx/start.S + experienced last week where building failed having specified + O=../build.sequoia. + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + +commit 466fff1a7bb5fe764a06450626f6098219f446b8 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jun 25 15:57:39 2007 +0200 + + ppc4xx: Add pci_pre_init() for 405 boards + + This patch removes the CFG_PCI_PRE_INIT option completely, since + it's not needed anymore with the patch from Matthias Fuchs with + the "weak" pci_pre_init() implementation. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6f35c53166213c24a5a0e2390ed861136ff73870 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Jun 24 17:41:21 2007 +0200 + + ppc4xx: Maintenance patch for esd's CPCI405 derivats + + -add pci_pre_init() for pci interrupt fixup code + -disable phy sleep mode via reset_phy() function + -use correct io accessors + -cleanup + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Jun 24 17:23:41 2007 +0200 + + ppc4xx: Add pci_pre_init() for 405 boards + + This patch adds support for calling a plattform dependant + pci_pre_init() function for 405 boards. This can be used to + move the current pci_405gp_fixup_irq() function into the + board code. + + This patch also makes the CFG_PCI_PRE_INIT define obsolete. + A default function with 'weak' attribute is used when + a board specific pci_pre_init() is not implemented. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jun 22 23:59:00 2007 +0200 + + Coding stylke cleanup; rebuild CHANGELOG + +commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9 +Author: Igor Lisitsin <igor@emcraft.com> +Date: Wed Apr 18 14:55:19 2007 +0400 + + Adapt log buffer code to support Linux 2.6 + + A new environment variable, "logversion", selects the log buffer + behaviour. If it is not set or set to a value other than 2, then the + old, Linux 2.4.4, behaviour is selected. + + Signed-off-by: Igor Lisitsin <igor@emcraft.com> + -- + +commit a11e06965ec91270c51853407ff1261d3c740386 +Author: Igor Lisitsin <igor@emcraft.com> +Date: Wed Mar 28 19:06:19 2007 +0400 + + Extend POST support for PPC440 + + Added memory, CPU, UART, I2C and SPR POST tests for PPC440. + + Signed-off-by: Igor Lisitsin <igor@emcraft.com> + -- + +commit 566a494f592ae3b3c0785d90d4e1ba45574880c4 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Fri Jun 22 19:11:54 2007 +0200 + + [PCS440EP] upgrade the PCS440EP board: + - Show on the Status LEDs, some States of the board. + - Get the MAC addresses from the EEProm + - use PREBOOT + - use the CF on the board. + - check the U-Boot image in the Flash with a SHA1 + checksum. + - use dynamic TLB entries generation for the SDRAM + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 3a1f5c81b0b9557817a789bece839905581c2205 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 22 16:58:40 2007 +0200 + + ppc4xx: Fix problem with extended program_tlb() funtion + + The recently extended program_tlb() function had a problem when + multiple TLB's had to be setup (for example with 512MB of SDRAM). The + virtual address was not incremented. This patch fixes this issue + and is tested on Katmai with 512MB SDRAM. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Fri Jun 22 14:58:04 2007 +0200 + + [ppc] Fix build breakage for all non-4xx PowerPC variants. + + - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros + - minor 4xx cleanup + +commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jun 20 18:14:24 2007 +0200 + + Coding style cleanup. Refresh CHANGELOG. + +commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024 +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 17:22:44 2007 +0200 + + ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board + + This patch adds a board command to configure the I2C bootstrap EEPROM + values. Right now 533 and 667MHz are supported for booting either via NOR + or NAND FLASH. Here the usage: + + => bootstrap 533 nor ;to configure the board for 533MHz NOR booting + => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit df8a24cdd30151505cf57bbee5289e91bf53bd1b +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 16:42:31 2007 +0200 + + [ppc4xx] Fix problem with NAND booting on AMCC Acadia + + The latest changes showed a problem with the location of the NAND-SPL + image in the OCM and the init-data area (incl. cache). This patch + fixes this problem. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 86ba99e34194394052d24c04dc40d1263d29a26f +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 16:40:58 2007 +0200 + + [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 11:33:41 2007 +0200 + + [ppc4xx] Change lwmon5 port to work with recent 440 exception rework + + Now CONFIG_440 has to be defined in all PPC440 board config files. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit efa35cf12d914d4caba942acd5a6c45f217de302 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Fri Jun 15 11:19:28 2007 +0200 + + ppc4xx: Clean up 440 exceptions handling + + - Introduced dedicated switches for building 440 and 405 images required + for 440-specific machine instructions like 'rfmci' etc. + + - Exception vectors moved to the proper location (_start moved away from + the critical exception handler space, which it occupied) + + - CriticalInput now serviced (with default handler) + + - MachineCheck properly serviced (added a dedicated handler and return + subroutine) + + - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, + unhandled and those not relevant for 4xx were eliminated) + + - Eliminated Linux leftovers, removed dead code + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 08:18:01 2007 +0200 + + [ppc4xx] Add initial lwmon5 board support + + This patch adds initial support for the Liebherr lwmon5 board euqipped + with an AMCC 440EPx PowerPC. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 85f737376d5ff3d5f0d45a8b657686326d175307 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 07:39:43 2007 +0200 + + [ppc4xx] Extend 44x GPIO setup with default output state + + The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup + is extended with the default GPIO output state (level). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit dbca208518e5e7f01a6420588d1cd6e60db74c2b +Author: Stefan Roese <sr@denx.de> +Date: Thu Jun 14 11:14:32 2007 +0200 + + [ppc4xx] Extend program_tlb() with virtual & physical addresses + + Now program_tlb() allows to program a TLB (or multiple) with + different virtual and physical addresses. With this change, now one + physical region (e.g. SDRAM) can be mapped 2 times, once with caches + diabled and once with caches enabled. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88 +Author: Detlev Zundel <dzu@denx.de> +Date: Wed May 23 19:02:41 2007 +0200 + + Change 'repeatable' attribute of some commands to sensible values. + + Most prominently this changes 'erase' to be non-repeatable. + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit 5afb202093f6a001797db92cf695b93a70ea9ab4 +Author: Detlev Zundel <dzu@denx.de> +Date: Wed May 23 18:47:48 2007 +0200 + + Fix 'run' not to continue after interrupted command + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit 9b7464a2c88614e1061f509c48930a3d240d1a35 +Author: Jason Jin <Jason.jin@freescale.com> +Date: Mon Jun 11 15:14:24 2007 +0200 + + USB: This patch fix readl in ohci swap reg access. + + Signed-off-by: Jason Jin <Jason.jin@freescale.com> + +commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Jun 8 14:52:22 2007 +0200 + + TQM5200: Add Flat Device Tree support, update default env. accordingly. + + Signed-off-by: Jan Wrobel <wrr@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 9045f33c023f698660a2e45d1b2194c0711abebc +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jun 8 10:24:58 2007 +0200 + + Fix config problems on SC3 board; make ide_reset_timeout work. + +commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b +Author: Benoît Monin <bmonin@adeneo.eu> +Date: Fri Jun 8 09:55:24 2007 +0200 + + [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE + + Set the correct value in GPIOx_TCR when configuring the gpio + with CFG_440_GPIO_TABLE. + + Signed-off-by: Benoit Monin <bmonin@adeneo.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jun 6 16:26:56 2007 +0200 + + Coding Style cleanup; generate new CHANGELOG file. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Wed Jun 6 11:49:44 2007 +0200 + + TRAB, USB: update trab board configuration for use of generic ohci driver + +commit dace45acd1c1357daa9322099d07c9a9e08b0024 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Wed Jun 6 11:49:43 2007 +0200 + + USB: ohci fixes and cleanup for ppc4xx and yosemite board. + +commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df +Author: Markus Klotzbuecher <mk@denx.de> +Date: Wed Jun 6 11:49:43 2007 +0200 + + USB: ohci fixes and cleanup for mpc5xxx and IceCube board config + +commit fc43be478f2aa37ce38acd85355038866e4162af +Author: Markus Klotzbuecher <mk@denx.de> +Date: Wed Jun 6 11:49:35 2007 +0200 + + USB/OHCI: endianness cleanup in the generic ohci driver + +commit c440bfe6d6d92d66478a7e84402b31f48413617b +Author: Stefan Roese <sr@denx.de> +Date: Wed Jun 6 11:42:13 2007 +0200 + + ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board + + This patch adds NAND booting support for the AMCC Acadia eval board. + + Please make sure to configure jumper J7 to position 2-3 when booting + from NOR, and to position 1-2 when booting for NAND. + + I also added a board command to configure the I2C bootstrap EEPROM + values. Right now only 267MHz is support for booting either via NOR + or NAND FLASH. Here the usage: + + => bootstrap 267 nor ;to configure the board for 267MHz NOR booting + => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 18135125f909948b85d1d6881ab4ac0efb4a1c58 +Author: Rodolfo Giometti <giometti@linux.it> +Date: Wed Jun 6 10:08:14 2007 +0200 + + Files include/linux/byteorder/{big,little}_endian.h define + __BIG_ENDIAN and __LITTLE_ENDIAN. + + Signed-off-by: Rodolfo Giometti <giometti@linux.it> + +commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82 +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Wed Jun 6 10:08:14 2007 +0200 + + Add USB PCI-OHCI, USB keyboard and event poll support to the + MPC8641HPCN board config file. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + +commit 4dae14ce8fbdf380017dc54f172218e7d2acc889 +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Wed Jun 6 10:08:14 2007 +0200 + + USB PCI-OHCI, interrupt pipe and usb event poll support + + This patch added USB PCI-OHCI chips support, interrupt pipe support + and usb event poll support. For supporting the USB interrupt pipe, the + globe urb_priv is moved to purb in ed struct. Now, we can process + several urbs at one time. The interrupt pipe support codes are ported + from Linux kernel 2.4. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + +commit fdcfaa1b02268b2899e374b35adf936c911a47eb +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Wed Jun 6 10:08:13 2007 +0200 + + USB event poll support + + This patch adds USB event poll support, which could be used in usbkbd + and other usb devices driver when the asynchronous interrupt + processing is supported. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com + +commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e +Author: Rodolfo Giometti <giometti@linux.it> +Date: Wed Jun 6 10:08:12 2007 +0200 + + ISP116x: delay for crappy USB keys + + Using some (very) slow USB keys cause the USB host controller buffers + are not ready to be read by the CPU so we need an extra delay before + reading the USB storage data. + + Signed-off-by: Rodolfo Giometti <giometti@linux.it> + +commit 09444143670c9c2243cb7aba9f70b3713d33bed1 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Wed Jun 6 10:08:12 2007 +0200 + + Change duplicate usb_cpu_init_fail to usb_board_init_fail + + Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing + this out. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Tue Jun 5 12:30:52 2007 -0500 + + mpc8641 image size cleanup + + e600 does not have a bootpg restriction. + Move the version string to beginning of image at fff00000. + Resetvec.S is not needed. + Update flash copy instructions. + Add tftpflash env variable + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit e3cbe1f93c5722f8ebbad468e30c069a2b511097 +Author: Benoît Monin <bmonin@adeneo.eu> +Date: Mon Jun 4 08:36:05 2007 +0200 + + [PATCH] Fix ppc4xx bootstrap letter displayed on startup + + The attached patch is mainly cosmetic, allowing u-boot to + display the correct bootstrap option letter according to the + datasheets. + + The original patch was extended with 405EZ support by Stefan + Roese. + + Signed-off-by: Benoit Monin <bmonin@adeneo.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5b1313fb2758ffce8b624457f777d8cc6709608d +Author: Nikita V. Youshchenko <yoush@debian.org> +Date: Wed May 23 12:45:19 2007 +0400 + + fix compilation problem for mpc8349itx CFG_RAMBOOT + + Current include/configs/MPC8349ITX.h does contain some support for building + image that will be started from memory (without putting in into flash). + It could be triggered by building with TEXT_BASE set to a low value. + + However, this support is incomplete: using of low TEXT_BASE causes + defining configuration macros in inconsistent way, which later leads + to compilation errors. In particular. flash support is being disabled, + but then flash structures get referenced. + + This patch fixes this, making it possible to build with low TEXT_BASE. + + Signed-Off-By: Nikita Youshchenko <yoush@debian.org> + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 8a364f0970de49949d635e60accf463c6443ef8c +Author: Nikita V. Youshchenko <yoush@debian.org> +Date: Wed May 23 12:45:25 2007 +0400 + + add missing 'console' var to default mpc8349itx config + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 16:18:17 2007 +0200 + + ppc4xx: Add missing file for Bamboo NAND booting support + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:58:19 2007 +0200 + + ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz + + This patch undoes the patch by Jeff Mann with commit-id ada4697d. As + suggested by AMCC it is not recommended to dynamically change the EBC + speed after bootup. So we undo this change to be on the safe side. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9d9096043e8f713d4bf1743d32e1459e6a11644b +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:29:04 2007 +0200 + + ppc4xx: Update Sequoia NAND booting support with ECC + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cf959c7d6687567c308e366e9581e1a5aff5cc5b +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:27:11 2007 +0200 + + ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board + + This patch adds NAND booting support for the AMCC Bamboo eval board. + Since the NAND-SPL boot image is limited to 4kbytes, this version + only supports the onboard 64MBytes of DDR. The DIMM modules can't be + supported, since the setup code for I2C DIMM autodetection and + configuration is too big for this NAND bootloader. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 42be56f53c8b107868e6125c8524ae84293e95a7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:23:04 2007 +0200 + + NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c + + The U-Boot NAND booting support is now extended to support ECC + upon loading of the NAND U-Boot image. + + Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a471db07fbb65a841ffc9f4f112562b945230f98 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:19:29 2007 +0200 + + ppc4xx: Prepare Bamboo port for NAND booting support + + This patch updates the "normal" Bamboo NOR booting port, so + that it is compatible with the coming soon NAND booting + Bamboo port. + + It also enables the 2nd NAND flash on the Bamboo. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:16:58 2007 +0200 + + ppc4xx: Update in_be32() functions and friends to latest Linux version + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:15:12 2007 +0200 + + NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c + + This patch adds hardware ECC support to the NDFC driver. It also + changes the register access from using the "simple" in32/out32 + functions to the in_be32/out_be32 functions, which make sure + that the access is correctly synced. This is the only recommended + access to SoC registers in the current Linux kernel. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 17b5e862287cca76f19dcf8b741e61a7d06617f2 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:12:15 2007 +0200 + + NAND: Update nand_ecc.c to latest Linux version + + This patch updates the nand_ecc code to the latest Linux version. + The main reason for this is the more compact code. This makes + it possible to include the ECC code into the NAND bootloader + image (NAND_SPL) for PPC4xx. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d2d432760d2199d0e8558fdd9d1789b8131abcf7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:09:50 2007 +0200 + + ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 13:45:24 2007 +0200 + + ppc4xx: Change Luan config file to support ECC + + With the updated 44x DDR2 driver the Luan board now supports + ECC generation and checking. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 7187db73491c8de0fb56efb5e5134ba5ec443089 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 13:45:00 2007 +0200 + + ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) + + Add config option for 180 degree advance clock control as needed + for the AMCC Luan eval board. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ee1529838abbfaa35f14e3ffbeaaba693159475f +Author: Wolfgang Denk <wd@denx.de> +Date: Thu May 31 17:20:09 2007 +0200 + + Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 7049288fb1f16f1b317140226cdebd07bd416395 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:26:46 2007 +0200 + + Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 4520fd4d2c450da49637216aa0e53739b61c60ac +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:06:36 2007 +0200 + + Motion-PRO: Add support for redundant environment. + + Enable redundant environment, add a MTD partition for it; also add env. + variable command for passing MTD partitions to the kernel command line. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit a26eabeec31746f06d309103690892805696e344 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:05:11 2007 +0200 + + Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. + + Allow passing longer command line to the kernel - useful especially + for passing MTD partition layout. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 9160b96f71483a116de81c68985e8ee306d36764 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:04:18 2007 +0200 + + Fix: Add missing NULL termination in strings expanded by macros parser. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 630ec84aef7228fc1dbfb38dec78541403a786cd +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:03:37 2007 +0200 + + Motion-PRO: Update EEPROM's page write bits and write delay. + + Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A + have a page write capability of two bytes", and "This device offers fast (1ms) + byte write". Add 3ms of extra delay. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit c00125e07c1ebc125bab40e1e18bceed8be0c162 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:58:45 2007 +0200 + + MPC5XXX, Motion-PRO: Fix PHY initialization problem. + + After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which + networking does not function. This commit switches PHY to TX mode by clearing + the FX_SEL bit of Mode Control Register. It also reverses commit + 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:57:15 2007 +0200 + + Motion-PRO: Add support for the temperature sensor. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit c75e639630cc132dc19cd1ecda5922c0db0bfbba +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:55:23 2007 +0200 + + Motion-PRO: Add displaying of CPLD revision information during boot. + + Signed-off-by: Jan Wrobel <wrr@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit c99512d6bd3973f01ca2fc4896d829b46e68f150 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:53:43 2007 +0200 + + MPC5xxx: Change names of defines related to IPB and PCI clocks. + + Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining + them does not cause PCI or IPB clocks to run at the specified speed. + Instead, they configure divisors used to calculate said clocks. This + patch renames the defines according to their real function. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit a11c0b85dc3664bb3c1e781137118730c8f619ab +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:51:48 2007 +0200 + + Motion-PRO: Add LED support. + + Signed-off-by: Jan Wrobel <wrr@semihalf.com> + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit d756894722c888d09a9fa1df8323753772d3dcce +Author: Stefan Roese <sr@denx.de> +Date: Thu May 24 09:49:00 2007 +0200 + + ppc4xx: Fix small 405EZ OCM initilization bug in start.S + + As pointed out by Bruce Adler <bruce.adler@acm.org> this patch + fixes a small bug in the 405EZ OCM initialization. Thanks for + spotting. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5d4a179013d59a76446462e1eb0a969fba63eb81 +Author: Stefan Roese <sr@denx.de> +Date: Thu May 24 08:22:09 2007 +0200 + + ppc4xx: Update AMCC Acadia support for board revision 1.1 + + This patch updates the Acadia (405EZ) support for the new 1.1 board + revision. It also adds support for NAND FLASH via the 4xx NDFC. + + Please note that the jumper J7 must be in position 2-3 for this + NAND support. Position 1-2 is for NAND booting only. NAND booting + support will follow later. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 822d55365bb557e084d0e33625a6dedcc866110b +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed May 23 14:09:46 2007 -0500 + + Add LIST_86xx MAKEALL target for PowerPC builds. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 9f0077abd69f7a7c756a915b961037302be3e6f2 +Author: Stefan Roese <sr@denx.de> +Date: Tue May 22 12:48:09 2007 +0200 + + ppc4xx: Use do { ... } while (0) for CPR & SDR access macros + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6f3dfc139a838b0841c151efe00ad47db2366e79 +Author: Stefan Roese <sr@denx.de> +Date: Tue May 22 12:46:10 2007 +0200 + + ppc4xx: Add 405 support to 4xx NAND driver ndfc.c + + This patch adds support for 405 PPC's to the 4xx NAND driver + ndfc.c. This is in preparation for the new AMCC 405EZ. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 10603d76767426be803dadd4fb688b97eb69481c +Author: Stefan Roese <sr@denx.de> +Date: Mon May 21 07:41:22 2007 +0200 + + ppc4xx: Fix problem in 405EZ OCM initialization + + As spotted by Bruce Adler this patch fixes an initialization problem + for the 405EZ OCM. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 3e3b956906eba9e4ad7931581ecedaad10eccce8 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Fri May 18 16:47:03 2007 +0100 + + Reduce line lengths to 80 characters max. + +commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Fri May 18 14:34:07 2007 +0100 + + Makefile permissions + +commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d +Author: Peter Pearse <peter.pearse@arm.com> +Date: Fri May 18 14:33:11 2007 +0100 + + Makefile permissions + +commit 255a3577c848706441daee0174543efe205a77f8 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed May 16 16:52:19 2007 -0500 + + Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx + + For all practical u-boot purposes, TSECs don't differ throughout the + mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 70124c2602ae2d4c5d3dba05b482d91548242de8 +Author: Stefano Babic <sbabic@denx.de> +Date: Wed May 16 14:49:12 2007 +0200 + + Fix compile problem cause my Microblaze merge + + Signed-off-by: Stefano Babic <sbabic@denx.de> + +commit ada4697d0230d6da552867777f98a67ec3ba2579 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Wed May 16 13:23:10 2007 +0200 + + [PATCH] Run new sequoia boards with an EBC speed of 83MHz + + Because the Sequoia board does not boot with an EBC faster than 66MHz, + the clock divider are changed after the initial boot process. + + This allows for maximum clocking speeds to be achieved on newer boards. + Sequoia boards with 666.66 MHz processors require that the EBC divider + be set to 3 in order to start the initial boot process at a slower EBC + speed. After the initial boot process, the divider can be set back to 2, + which will cause the boards to run at 83.333MHz. This is backward + compatible with boards with 533.33 MHz processors, as these boards will + already be set with an EBC divider of 2. + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + +commit a7676ea7732f3c596805079fed7e5c9fac652cfc +Author: Wolfgang Denk <wd@denx.de> +Date: Wed May 16 01:16:53 2007 +0200 + + Minor Coding Style cleanup, update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit d62f64cc23a940eafe712c776b3249e4160753d1 Author: Wolfgang Denk <wd@denx.de> Date: Wed May 16 00:13:33 2007 +0200 Coding Style Cleanup, new CHANGELOG +commit 3162eb836903c8b247fdc7470dd39bfa6996f495 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue May 15 23:38:05 2007 +0200 + + Minor coding style cleanup. + +commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e +Author: mushtaq khan <mushtaq_k@procsys.com> +Date: Fri Apr 20 14:23:02 2007 +0530 + + Add driver for S-ATA-controller on Intel processors with South + Bridge, ICH-5, ICH-6 and ICH-7. + + Implementation: + + 1. Code is divided in to two files. All functions, which are + controller specific are kept in "drivers/ata_piix.c" file and + functions, which are not controller specific, are kept in + "common/cmd_sata.c" file. + + 2. Reading and Writing from the S-ATA drive is done using PIO method. + + 3. Driver can be configured for 48-bit addressing by defining macro + CONFIG_LBA48, if this macro is not defined driver uses the 28-bit + addressing. + + 4. S-ATA read function is hooked to the File system, commands like + ext2ls and ext2load file can be used. This has been tested. + + 5. U-Boot command "SATA_init" is added, which initializes the S-ATA + controller and identifies the S-ATA drives connected to it. + + 6. U-Boot command "sata" is added, which is used to read/write, print + partition table and get info about the drives present. This I have + implemented in same way as "ide" command is implemented in U-Boot. + + 7. This driver is for S-ATA in native mode. + + 8. This driver does not support the Native command queuing and + Hot-plugging. + + Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> + +commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 +Author: mushtaq khan <mushtaq_k@procsys.com> +Date: Mon Apr 30 15:57:22 2007 +0530 + + Fixes bug clearing the bss section for i386 + + Hi, + There is a bug in the code of clearing the bss section for processor + i386.(File: cpu/i386/start.S) + In the code, bss_start addr (starting addr of bss section) is put into + the register %eax, but the code which clears the bss section refers to + the addr pointed by %edi. + + This patch fixes this bug by putting bss_start into %edi register. + + Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> + +commit c3243cf7b490057277d61acffe4ad0946f9eb4a4 +Author: Joe Hamman <joe.hamman@embeddedspecialties.com> +Date: Mon Apr 30 16:47:28 2007 -0500 + + Add support for BCM5464 Quad Phy + + Added support for Broadcom's BCM5464 Quad Phy + + Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> + +commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a +Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> +Date: Wed May 9 08:10:57 2007 +0800 + + Search the exception table with linear algorithm + + Search the exception table with linear algorithm instead of + bisecting algorithm. + Because the exception table might be unsorted. + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3 +Author: Aubrey.Li <aubrey.adi@gmail.com> +Date: Mon May 14 11:47:35 2007 +0800 + + Fix compilation issues on MACOSX + + Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com> + Signed-off-by: Aubrey Li <aubrey.adi@gmail.com> + +commit 56fd7162985c412317bbf763a225fba23c64fd31 +Author: Stephen Williams <steve@icarus.com> +Date: Tue May 15 07:55:42 2007 -0700 + + Fix for compile of JSE target + + The attached patch fixes the compile of the JSE board in the + denx git as of 14 may 2007. It is an extremely simple patch, + it just adds the missing define of CFG_SYSTEMACE_WIDTH. + + Fix to compile JSE against 20070514 git of u-boot + +commit 61936667e86a250ae12fd2dc189d3588f0a59e0b +Author: Stefan Roese <sr@denx.de> +Date: Fri May 11 12:01:49 2007 +0200 + + ppc4xx: Add mtcpr/mfcpr access macros + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 343c48bd84606c4025c8a7c7263fda465d6e284c +Author: Stefan Roese <sr@denx.de> +Date: Fri May 11 12:01:06 2007 +0200 + + ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 Author: Piotr Kruszynski <ppk@semihalf.com> Date: Thu May 10 16:55:52 2007 +0200 @@ -11,6 +3579,48 @@ Date: Thu May 10 16:55:52 2007 +0200 [Motion-PRO] Add MTD and JFFS2 support, also add default partition definition. +commit 65fb6a676e821f9570a2a376dc204bf611ce5f81 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 11:42:44 2007 +0100 + + Add the board directory for SMN42 + +commit 160131bf965785419626df6c388729fe0b597992 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 11:41:58 2007 +0100 + + Add the files for the SMN42 board + +commit 5c6d2b5a500f8c49670de8910150b78a41f781fc +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 11:40:34 2007 +0100 + + Remove the deleted files for the SMN42 patch + +commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 11:37:56 2007 +0100 + + New board SMN42 branch + +commit 29f3be0caf0799ca6b89dfd9824c15619a50000f +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 10:24:38 2007 +0100 + + Makefile permissions + +commit b84289b595731e8851df46e893845cc1322c9b9b +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Tue May 8 14:17:07 2007 -0500 + + 8641hpcn: Fix Makefile after moving pixis to board/freescale. + + The OBJTREE != SRCTREE build scenario was broken. + This fixes it. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 Author: Michal Simek <monstr@monstr.eu> Date: Tue May 8 15:57:43 2007 +0200 @@ -93,6 +3703,18 @@ Date: Mon May 7 19:43:10 2007 +0200 fix: read and write MSR - repair number of parameters +commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Mon May 7 19:42:49 2007 +0200 + + [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file + + A '3' got cut off in the formatting of the last patch to automatically + change the clock speed of the system clock on sequoia board. + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Signed-off-by: Stefan Roese <sr@denx.de> + commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 Author: Michal Simek <monstr@monstr.eu> Date: Mon May 7 19:33:51 2007 +0200 @@ -131,6 +3753,12 @@ Date: Mon May 7 17:11:09 2007 +0200 new: add writing to msr register +commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Mon May 7 16:43:56 2007 +0200 + + Fix an ancient CHANGELOG conflict + commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 Author: Timur Tabi <timur@freescale.com> Date: Sat May 5 08:12:30 2007 +0200 @@ -273,6 +3901,20 @@ Date: Sat May 5 08:29:01 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 2f550ab976405300f5b07bf2890800840d0aa05f +Author: Timur Tabi <timur@freescale.com> +Date: Sat May 5 08:12:30 2007 +0200 + + 5xxx: write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, ftp_cpu_setup() + should write the MAC address to mac-address and local-mac-address, if they + exist. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + commit a79886590593ba1d667c840caa4940c61639f18f Author: Thomas Knobloch <knobloch@siemens.com> Date: Sat May 5 07:04:42 2007 +0200 @@ -336,6 +3978,30 @@ Date: Fri Jan 5 09:15:34 2007 +0100 Signed-off-by Dan Malek, <dan@embeddedalley.com> +commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Wed May 2 13:31:53 2007 +0200 + + macb: Don't restart autonegotiation if we already have link + + Rework macb_phy_init so that it doesn't attempt to re-negotiate if the + link is already up. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit 04fcb5d38bc90779cd9a710d60702075986f0e29 +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Wed May 2 13:22:38 2007 +0200 + + macb: Introduce a few barriers when dealing with DMA descriptors + + There were a few theoretical possibilities that the compiler might + optimize away DMA descriptor reads and/or writes and thus cause + synchronization problems with the hardware. Insert barriers where + we depend on reads/writes actually hitting memory. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + commit ffa621a0d12a1ccd81c936c567f8917a213787a8 Author: Andy Fleming <afleming@freescale.com> Date: Sat Feb 24 01:08:13 2007 -0600 @@ -436,12 +4102,35 @@ Date: Sun Apr 29 14:13:01 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 +Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> +Date: Sun Apr 29 14:01:54 2007 +0200 + + [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message + + MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up + message. Use PVR to distinguish between the two variants, and print proper CPU + information. + + Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + commit 5c5d3242935cf3543af01142627494434834cf98 Author: Kim Phillips <kim.phillips@freescale.com> Date: Wed Apr 25 12:34:38 2007 -0500 mpc83xx: minor fixups for 8313rdb introduction +commit ada4d40091f6ed4a4f0040e08d20db21967e4a67 +Author: Ladislav Michl <ladis@linux-mips.org> +Date: Wed Apr 25 16:01:26 2007 +0200 + + [PATCH] simplify silent console + + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + Acked-by: Stefan Roese <sr@denx.de> + commit 144876a380f5756f57412caf74c1d6dc201dd796 Author: Michal Simek <monstr@monstr.eu> Date: Tue Apr 24 23:01:02 2007 +0200 @@ -738,6 +4427,69 @@ Date: Mon Apr 16 14:31:55 2007 -0500 Signed-off-by: Scott Wood <scottwood@freescale.com> +commit 7fc4c71a143be8666d70803fb25ae60379c95622 +Author: Stefan Roese <sr@denx.de> +Date: Mon Apr 23 15:39:59 2007 +0200 + + Fix file mode + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 38257988abfe74d459ca2ad748b109ca04e4efe1 +Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> +Date: Mon Apr 23 15:30:39 2007 +0200 + + [PATCH] Avoid assigning PCI resources from zero address + + If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE + core complains and IDE drivers fails to work. Also, assigning zero to a BAR + was illegal according to PCI 2.1 (the later revisions seem to have excluded the + sentence about "0" being considered an invalid address) -- so, use a reasonable + starting value of 0x1000 (that's what the most Linux archs are using). + + Alternatively, one might have fixed the calls to pci_set_region() individually + (some code even seems to have taken care of this issue) but that would have + been a lot more work. :-) + + Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit afb903a2eb9436baa9270ccc0c27082d86497d89 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Mon Apr 23 14:00:11 2007 +0200 + + [patch] setenv(...) can delete environmentalvariables + + update setenv() function so that entering a NULL value for the + variable's value will delete the environmental variable + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 36f104e5caa747d568eff26b369565af57c2ffa6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Apr 23 13:54:24 2007 +0200 + + [patch] use unsigned char in smc91111 driver for mac + + the v_mac variable in the smc91111 driver is declared as a signed char ... + this causes problems when one of the bytes in the MAC is "signed" like 0xE0 + because when it gets printed out, you get a display like: + 0xFFFFFFE0 and that's no good + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459 +Author: Rodolfo Giometti <giometti@enneenne.com> +Date: Mon Apr 23 13:10:52 2007 +0200 + + USB: (Another) delay for crappy USB keys. + + Some USB keys are slow in giving back an answer when the Root HUB + enables power lines. + + Signed-off-by: Rodolfo Giometti <giometti@linux.it> + commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 Author: Stefan Roese <sr@denx.de> Date: Mon Apr 23 12:00:22 2007 +0200 @@ -1403,6 +5155,22 @@ Date: Wed Apr 4 01:49:15 2007 +0200 Minor cleanup. +commit 822af351ad2babc7d99033361a5fcacd30f6bc78 +Author: Rodolfo Giometti <giometti@enneenne.com> +Date: Tue Apr 3 14:27:18 2007 +0200 + + Support for the Philips ISP116x HCD (Host Controller Driver) + + Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> + +commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Apr 3 14:27:08 2007 +0200 + + USB: cleanup monahans usb support. Remove dead code. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + commit a65c5768e5537530bd1780af3d3fddc3113a163c Author: Stefan Roese <sr@denx.de> Date: Mon Apr 2 10:09:30 2007 +0200 @@ -1572,6 +5340,23 @@ Date: Tue Mar 27 00:32:16 2007 +0200 PATCH: Resolve GPL license problem +commit ae00bb4b2944dc64a485ed72a19754b11af7c223 +Author: Rodolfo Giometti <giometti@enneenne.com> +Date: Mon Mar 26 12:03:36 2007 +0200 + + PXA: pxa27x USB OHCI support + + Signed-off-by: Rodolfo Giometti <giometti@linux.it> + +commit ae79f60677c208326535647dcbd5c3ec40dbcb0b +Author: Markus Klotzbuecher <mk@denx.de> +Date: Mon Mar 26 11:21:05 2007 +0200 + + USB: remove the S3C24X0_merge #define, which was introduced while + merging OHCI drivers. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + commit 1798049522f594013aea29457d46794298c6ae15 Author: Michal Simek <root@monstr.eu> Date: Mon Mar 26 01:39:07 2007 +0200 @@ -3697,6 +7482,34 @@ Date: Mon Nov 27 14:12:17 2006 +0100 Signed-off-by: Stefan Roese <sr@denx.de> +commit 58b485776698c3d71ec5a215e392123b4c15afa3 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Mon Nov 27 11:51:21 2006 +0100 + + Add a small README with information on the generic ohci driver. + +commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f +Author: Markus Klotzbuecher <mk@denx.de> +Date: Mon Nov 27 11:46:46 2006 +0100 + + Fix some endianness issues related to the generic ohci driver + +commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Mon Nov 27 11:44:58 2006 +0100 + + Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able + to choose between the old and the generic OHCI drivers. + +commit 53e336e9ffc51035bdc4e5867631b3378761b4df +Author: Markus Klotzbuecher <mk@denx.de> +Date: Mon Nov 27 11:43:09 2006 +0100 + + Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver + and adapted board configs TQM5200 and yosemite accordingly. This commit + also makes the maximum number of root hub ports configurable + (CFG_USB_OHCI_MAX_ROOT_PORTS). + commit 78d620ebb5871d252270dedfad60c6568993b780 Author: Wolfgang Denk <wd@atlas.denx.de> Date: Thu Nov 23 22:58:58 2006 +0100 @@ -5454,6 +9267,12 @@ Date: Tue Jun 27 18:11:54 2006 +0800 Signed-off-by: Jason Jin <Jason.jin@freescale.com> +commit 99d70e3a47affb9bae041a2caece7cd516e213b3 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Mon Jun 26 11:06:00 2006 +0200 + + More code cleanup + commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba Author: Jon Loeliger <jdl@freescale.com> Date: Thu Jun 22 08:51:46 2006 -0500 @@ -5478,6 +9297,28 @@ Date: Thu Jun 15 21:33:37 2006 -0500 Signed-off-by: Jon Loeliger <jdl@freescale.com> +commit 386eda022473394ad8f36b86f2bdc9b4cb816291 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Jun 14 18:14:56 2006 +0200 + + Code cleanup + +commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Jun 14 17:45:53 2006 +0200 + + Various USB related patches + - Add support for mpc8xx USB device. + - Add support for Common Device Class - Abstract Control Model USB console. + - Add support for flow control in USB slave devices. + - Add support for switching between gserial and cdc_acm using environment. + - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h + - Update usbcore slightly to ease host enumeration. + - Fix non-portable endian problems in usbdcore and usbdcore_ep0. + - Add AdderUSB_config as a defconfig to enable usage of the USB console + by default with the Adder87x U-Boot port. + Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006 + commit 8ecc971618f56029ad99d3516f8b297a6ed58971 Author: Jon Loeliger <jdl@jdl.com> Date: Wed Jun 7 10:53:55 2006 -0500 @@ -5556,6 +9397,12 @@ Date: Tue May 30 17:47:00 2006 -0500 Signed-off-by: Jon Loeliger <jdl@freescale.com> +commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue May 30 16:56:14 2006 +0200 + + Support generic OHCI support for the s3c24x0 cpu. + commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 Author: Haiying Wang <Haiying.Wang@freescale.com> Date: Tue May 30 09:10:32 2006 -0500 @@ -5605,6 +9452,29 @@ Date: Fri May 26 10:01:16 2006 -0500 Signed-off-by: Jon Loeliger <jdl@jdl.com> +commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue May 23 13:38:35 2006 +0200 + + Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some + fixes to the latter. + +commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue May 23 10:33:11 2006 +0200 + + More cleanup for the delta board and the generic usb_ohci driver. Added + CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific + initialization and cleanup hooks respectively. + +commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Mon May 22 16:33:54 2006 +0200 + + This patch adds USB storage support for the delta board. This is the first + board to make use of a generic OHCI driver, that calls hooks for board + dependant initialization. + commit 14e37081ff3cac7ebe6e93836523429853b6b292 Author: Jon Loeliger <jdl@jdl.com> Date: Fri May 19 13:28:39 2006 -0500 |