* Make CPU clock on ICA-IP board controllable by a "cpuclk"

  environment variable which can set to "100", "133", or "150". The
  CPU clock will be configured accordingly upon next reboot. Other
  values are ignored. In case of an invalid or undefined "cpuclk"
  value, the compile-time default CPU clock speed will be used.

* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
  window that is used to access the UART registers by the Linux driver)

* Patch by Reinhard Meyer, 20 Dec 2003:
  Fix clock calculation for the MPC5200 for higher clock frequencies
  (above 2**32 / 10 = 429.5 MHz).

1 files changed, 15 insertions, 0 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 7b2efdc..84e3092 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,21 @@
 Changes since U-Boot 1.0.0:
 ======================================================================
 
+* Make CPU clock on ICA-IP board controllable by a "cpuclk"
+  environment variable which can set to "100", "133", or "150". The
+  CPU clock will be configured accordingly upon next reboot. Other
+  values are ignored. In case of an invalid or undefined "cpuclk"
+  value, the compile-time default CPU clock speed will be used.
+
+* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
+  window that is used to access the UART registers by the Linux driver)
+
+* Patch by Reinhard Meyer, 20 Dec 2003:
+  Fix clock calculation for the MPC5200 for higher clock frequencies
+  (above 2**32 / 10 = 429.5 MHz).
+
+* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
+
 * Fix IceCube CLKIN configuration (it's 33.000000MHz)
 
 * Add new configuration for IceCube board with DDR memory