Merge branch 'origin'

Conflicts:

	CHANGELOG

1 files changed, 267 insertions, 30 deletions

diff --git a/CHANGELOG b/CHANGELOG
index eaa1893..542a4d1 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,88 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+
+* Fix DDR ECC bit definitions for MPC83xx.
+
+* Add initial support for MPC8349E MDS board.
+
+* Add support for ECC DDR initialization on MPC83xx.
+
+* Add DMA support for MPC83xx.
+
+* Add sync in do_reset() routine for MPC83xx after RPR register
+  was written to. It is need on some targets when BAT translation
+  is enabled.
+
+* Add bit definitions for MPC83xx DDR controller registers.
+
+* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
+
+* Correct shift offsets in icache_status and dcache_status for MPC83xx.
+
+* Add support for DS1374 RTC chip.
+
+* Add support for Lite5200B board.
+  Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
+
+* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
+  timer and cpu_reset code from cpu/$(CPU) into the new
+  cpu/$(CPU)/$(SOC) directories
+  Patch by Andreas Engel, 13 Mar 2006
+
+* Change max size of uncompressed uImage's to 8MByte and add
+  CFG_BOOTM_LEN to adjust this setting.
+
+  As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
+  uImages was restricted to 4MBytes. This default size is now
+  increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
+  in the board config file.
+
+  Patch by Stefan Roese, 13 Mar 2006
+
+* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
+  Patch by Stefan Roese, 13 Mar 2006
+
+* cpu/ppc4xx/start.S : exceptions are enabled after relocation
+  Patch by Cedric Vincent, 06 Jul 2005
+
+* au1x00_eth.c: check malloc return value and abort if it failed
+  Patch by Andrew Dyer, 26 Jul 2005
+
+* Change the sequence of events in soft_i2c.c:send_ack() to keep from
+  incorrectly generating start/stop conditions on the bus.
+  Patch by Andrew Dyer, 26 Jul 2005
+
+* Fix bug in [id]cache_status commands for MPC85xx processors;
+  should look at LSB of L1CSRn registers to determine if L1 cache is
+  enabled, not the MSB.
+  Patch by Murray Jensen, 19 Jul 2005
+
+* Fix array overflow with fw_setenv on uninitialised environment
+  Patch by Murray Jensen, 15 Jul 2005
+
+* Add support for EmbeddedPlanet EP88x boards
+  Patch by Yuli Barcohen, 13 Jul 2005
+
+* Remove board specific configuration includes from the common xilinx
+  ethernet and iic adapter code.
+  Patch by Michael Libeskind, 12 Jul 2005
+
+* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
+  Patch by Murray Jensen, 08 Jul 2005
+
+* Add (some) definitions for the MPC85xx local bus controller
+  Patch by Murray Jensen, 08 Jul 2005
+
+* Add CPM2 I/O pin functions for MPC85xx processors
+  Patch by Murray Jensen, 08 Jul 2005
+
+* Fix compile problem
+
+* Added PCI support for MPC8349ADS board
+  Patch by Kumar Gala 11 Jan 2006
+
 * Enable address translation on MPC83xx
   Patch by Kumar Gala, 10 Feb 2006
 
@@ -11,16 +93,42 @@ Changes since U-Boot 1.1.4:
 * Fixed defines for MPC83xx SICRL register to match current specs
   Patch by Kumar Gala, 23 Jan 2006
 
+* Only disable the MPC83xx watchdog if its enabled out of reset.
+  If its disabled out of reset SW can later enable it if so desired
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Allow config of GPIO direction & data registers at boot on 83xx
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Enable time handling on 83xx
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Make System IO Config Registers board configurable on MPC83xx
+  Patch by Kumar Gala, 11 Jan 2006
+
 * Fixed PCI indirect config ops to handle multiple PCI controllers
   We need to adjust the bus number we are trying to access based
   on which PCI controller its on
-  Patch by Kumar Gala 12 Jan 2006
+  Patch by Kumar Gala, 12 Jan 2006
+
+* Report back PCI bus when doing table based device config
+  Patch by Kumar Gala, 11 Jan 2006
+
+* Added support for PCI prefetchable region and BARs
+  If a host controller sets up a region as prefetchable and
+  a device's BAR denotes it as prefetchable, allocate the
+  BAR into the prefetch region.
+
+  If a BAR is prefetchable and no prefetchable region has
+  been setup by the controller we fall back to allocating
+  the BAR into the normally memory region.
+  Patch by Kumar Gala, 11 Jan 2006
 
 * Add helper function for generic flat device tree fixups for mpc83xx
-  Patch by Kumar Gala 11 Jan 2006
+  Patch by Kumar Gala, 11 Jan 2006
 
 * Add support for passing initrd information via flat device tree
-  Patch by Kumar Gala 11 Jan 2006
+  Patch by Kumar Gala, 11 Jan 2006
 
 * Added OF_STDOUT_PATH and OF_SOC
 
@@ -28,11 +136,10 @@ Changes since U-Boot 1.1.4:
   for console output
 
   OF_SOC specifies the proper name of the SOC node if one exists.
-  Patch by Kumar Gala 11 Jan 2006
+  Patch by Kumar Gala, 11 Jan 2006
 
-* Allow board code to fixup the flat device tree before booting a
-  kernel
-  Patch by Kumar Gala 11 Jan 2006
+* Allow board code to fixup the flat device tree before booting a kernel
+  Patch by Kumar Gala, 11 Jan 2006
 
 * Added CONFIG_ options for bd_t and env in flat dev tree
 
@@ -42,36 +149,167 @@ Changes since U-Boot 1.1.4:
 	CONFIG_OF_HAS_UBOOT_ENV will copy the environment
 	variables from u-boot into the flat device tree
 
-  Patch by Kumar Gala 11 Jan 2006
+  Patch by Kumar Gala, 11 Jan 2006
 
-* Report back PCI bus when doing table based device config
-  Patch by Kumar Gala 11 Jan 2006
+* Add support for the DHCP vendor optional bootfile (#67).
+  Ignores the vendor TFTP server name option (#66).
+  Patch by Murray Jensen, 30 Jun 2005
 
-* Added support for PCI prefetchable region and BARs
-  If a host controller sets up a region as prefetchable and
-  a device's BAR denotes it as prefetchable, allocate the
-  BAR into the prefetch region.
+* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
+  Patch by Andy Fleming, 14 Jun 2005
 
-  If a BAR is prefetchable and no prefetchable region has
-  been setup by the controller we fall back to allocating
-  the BAR into the normally memory region.
-  Patch by Kumar Gala 11 Jan 2006
+* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
+  Patch by Gerhard Jaeger, 21 Jun 2005
 
-* Only disable the MPC83xx watchdog if its enabled out of reset.
-  If its disabled out of reset SW can later enable it if so desired
-  Patch by Kumar Gala, 11 Jan 2006
+* Add netconsole and some more commands to RPXlite_DW board
+  Patch by Sam Song, 19 Jun 2005
 
-* Allow config of GPIO direction & data registers at boot on 83xx
-  Patch by Kumar Gala, 11 Jan 2006
+* Fix bad declaration on pci_cfgfunc_nothing
+  Patch by Sam Song, 19 Jun 2005
 
-* Enable time handling on 83xx
-  Patch by Kumar Gala, 11 Jan 2006
+* Adjust "echo" as a default command
+  Patch by Sam Song, 19 Jun 2005
 
-* Make System IO Config Registers board configurable on MPC83xx
-  Patch by Kumar Gala, 11 Jan 2006
+* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
+  Patch by KokHow Teh, 16 Jun 2005
 
-* Added PCI support for MPC8349ADS board
-  Patch by Kumar Gala 11 Jan 2006
+* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
+  Patch by Rick Bronson, 15 Jun 2005
+
+* Coding Style cleanup
+
+* Avoid dereferencing NULL in find_cmd() if no valid commands were found
+  Patch by Andrew Dyer, 13 Jun 2005
+
+* Add ADI Blackfin support
+  - add support for Analog Devices Blackfin BF533 CPU
+  - add support for the ADI BF533 Stamp uClinux board
+  - add support for the ADI BF533 EZKit board
+  Patches by Richard Klingler, 11 Jun 2005
+
+* Add loads of ntohl() in image header handling
+  Patch by Steven Scholz, 10 Jun 2005
+
+* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
+  variable to set clock
+  Patch by Yuli Barcohen, 05 Jun 2005
+
+* RPXlite configuration fixes
+  - Use correct flash sector size
+  - Use correct memory test end address
+  - Add support for bzip2 compression
+  - Various small fixes
+  Patch by Yuli Barcohen, 05 Jun 2005
+
+* Memory configuration changes for ZPC.1900 board
+  - Fix SDRAM timing on both local bus and 60x bus
+  - Add support for second flash bank (SIMM)
+  - Change boot flash base
+  Patch by Yuli Barcohen, 05 Jun 2005
+
+* Add support for Adder boards with 16MB SDRAM;
+  add support for second FEC on Adder87x board.
+  Patch by Yuli Barcohen, 05 Jun 2005
+
+* Fix conditional for including ks8695eth driver
+  Patch by Greg Ungerer, 04 Jun 2005
+
+* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
+  Patch by Friedrich Lobenstock, 02 Jun 2005
+
+* Fix comment in common/soft_i2c.c
+  Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
+
+* Cleanup compiler warnings.
+  Patch by Greg Ungerer, 21 May 2005
+
+* Word alignment fixes for word aligned NS16550 UART
+  Patch by Jean-Paul Saman, 01 Mar 2005
+
+  Fixes bug with UART that only supports word aligned access: removed
+  "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
+  (broken!) versions of GCC generate byte accesses when encountering
+  the packed attribute regardless if the struct is already correctly
+  aligned for a platform. Peripherals that can only handle word
+  aligned access won't work properly when accessed with byte access.
+  The struct NS16550 is already word aligned for REG_SIZE = 4, so
+  there is no need to packed the struct in that case.
+
+* Fix behaviour if gatewayip is not set
+  Patch by Robin Gilks, 23 Dec 2004
+
+* Fix cleanup for netstart board.
+  Remove build results from repository
+
+* Some code cleanup for GCC 4.x
+
+* Fixes to support environment in NAND flash;
+  enable NAND flash based environment for delta board.
+
+* Add support for Intel Monahans CPU on Zylonite and Delta boards
+  (This is Work in Progress!)
+
+* Add support for TQM8260-AI boards.
+
+* Minor code cleanup
+
+* Merge the new NAND code (testing-NAND brach); see doc/README.nand
+  Rewrite of NAND code based on what is in 2.6.12 Linux kernel
+  Patch by Ladislav Michl, 29 Jun 2005
+
+* Add lowboot target to mcc200 board
+  Patch by Stefan Roese, 4 Mar 2006
+
+* Fix problem with flash_get_size() from CFI driver update
+  Patch by Stefan Roese, 1 Mar 2006
+
+* Make CFG_NO_FLASH work on ARM systems
+  Patch by Markus Klotzbuecher, 27 Feb 2006
+
+* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
+  use hush shell.
+
+* Convert mcc200 to use common CFI flash driver
+  Patch by Stefan Roese, 28 Feb 2006
+
+* Add env-variable "unlock" to handle initial state of sectors
+  (locked/unlocked).
+
+  Only the U-Boot image and it's environment is protected,
+  all other sectors are unprotected (unlocked) if flash
+  hardware protection is used (CFG_FLASH_PROTECTION) and
+  the environment variable "unlock" is set to "yes".
+
+  Patch by Stefan Roese, 28 Feb 2006
+
+* Update drivers/cfi_flash.c:
+  - find_sector() called in both versions of flash_write_cfiword()
+  Patch by Peter Pearse, 27th Feb 2006
+
+* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
+  Patch by Jose Maria Lopez, 16 Jan 2006
+
+* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
+  Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
+
+* Changes/fixes for drivers/cfi_flash.c:
+  We *should* check if there are any error bits if the previous call
+  returned ERR_OK (Otherwise we will have output an error message in
+  flash_status_check() already.)  The original code would only check for
+  error bits if flash_status_check() returns ERR_TIMEOUT.
+  Patch by Marcus Hall, 23 Aug 2005
+
+* Changes/fixes for drivers/cfi_flash.c:
+  - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
+  - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
+  Patch by Sangmoon Kim, 19 Aug 2005
+
+* Fixes for drivers/cfi_flash.c:
+  - Fix wrong timeout value usage in flash_status_check()
+  - Round write_tout up when converting to msec in flash_get_size()
+  - Remove clearing flash status at the end of flash_write_cfibuffer()
+    which sets Intel 28F640J3 flash back to command mode on CSB472
+  Patch by Tolunay Orkun, 02 July 2005
 
 * Add basic support for the SMMACO4 Board from PanDaCom.
   Patch by Heiko Schocher, 20 Feb 2006
@@ -126,7 +364,6 @@ Changes since U-Boot 1.1.4:
 * Fix mkimage bug with multifile images created on 64 bit systems.
 
 * Add support for 28F256J3A flash (=> 64 MB) on PM520 board
->>>>>>> 6624b687bc2b747233090e67628df37d1c84ed17/CHANGELOG
 
 * Fix compiler problem with at91rm9200dk board.
   Patch by Eugen Bigz, 19 Dec 2005