powerpc/km82xx: add mgcoge3ne and remove mgcoge2ne support

This patch adds support for the MPC8247 based board mgcoge3ne.
Additionaly mgcoge2ne board supprot was removed, because due
to the mgcoge3ne, this board is obsolete and not longer
maintained.
The board is similar to mgcoge. The difference is that
a NUMONYX flash is used and a different SDRAM (256MB).
Also introduce CONFIG_KM_82XX to collect ppc82xx common
settings and remove staticness from the common set_pin function.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>

8 files changed, 96 insertions, 42 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index e2a4ba9..e2c48a8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -429,7 +429,7 @@ Heiko Schocher <hs@denx.de>
 	kmeter1		MPC8360
 	kmsupx5		MPC8321
 	mgcoge		MPC8247
-	mgcoge2ne	MPC8247
+	mgcoge3ne	MPC8247
 	mgcoge2un	ARM926EJS (Kirkwood SoC)
 	mucmc52		MPC5200
 	muas3001	MPC8270
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index dc96489..25a3850 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -22,7 +22,7 @@
  */
 
 #include <common.h>
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE)
+#if defined(CONFIG_KM82XX)
 #include <mpc8260.h>
 #endif
 #include <ioports.h>
@@ -398,10 +398,10 @@ int ivm_read_eeprom(void)
 #define DELAY_ABORT_SEQ		62  /* @200kHz 9 clocks = 44us, 62us is ok */
 #define DELAY_HALF_PERIOD	(500 / (CONFIG_SYS_I2C_SPEED / 1000))
 
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE)
+#if defined(CONFIG_KM_82XX)
 #define SDA_MASK	0x00010000
 #define SCL_MASK	0x00020000
-static void set_pin(int state, unsigned long mask)
+void set_pin(int state, unsigned long mask)
 {
 	ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
 
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index 6ce992a..cee24d4 100644
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -124,6 +124,7 @@ struct bfticu_iomap {
 
 int ethernet_present(void);
 int ivm_read_eeprom(void);
+void set_pin(int state, unsigned long mask);
 
 int set_km_env(void);
 int fdt_set_node_and_value(void *blob,
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index 01c0bfd..d453d25 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -288,7 +288,7 @@ int checkboard(void)
 #if defined(CONFIG_MGCOGE)
 	puts("Board: Keymile mgcoge");
 #else
-	puts("Board: Keymile mgcoge2ne");
+	puts("Board: Keymile mgcoge3ne");
 #endif
 	if (ethernet_present())
 		puts(" with PIGGY.");
@@ -314,6 +314,28 @@ int last_stage_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_MGCOGE3NE
+/*
+ * For mgcoge3ne boards, the mgcoge3un control is controlled from
+ * a GPIO line on the PPC CPU. If bobcatreset is set the line
+ * will toggle once what forces the mgocge3un part to restart
+ * immediately.
+ */
+void handle_mgcoge3un_reset(void)
+{
+	char *bobcatreset = getenv("bobcatreset");
+	if (bobcatreset) {
+		if (strcmp(bobcatreset, "true") == 0) {
+			puts("Forcing bobcat reset\n");
+			set_pin(0, 0x00000004);	/* clear PD29 to reset arm */
+			udelay(1000);
+			set_pin(1, 0x00000004);
+		} else
+			set_pin(1, 0x00000004);	/* set PD29 to not reset arm */
+	}
+}
+#endif
+
 /*
  * Early board initalization.
  */
@@ -329,6 +351,9 @@ int board_early_init_r(void)
 	out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
 		H_OPORTS_FCC1_PW_DWN));
 
+#ifdef CONFIG_MGCOGE3NE
+	handle_mgcoge3un_reset();
+#endif
 	return 0;
 }
 
diff --git a/boards.cfg b/boards.cfg
index e0791fe..f0d3440 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -440,7 +440,7 @@ PQ2FADS-ZU_66MHz_lowboot     powerpc     mpc8260     mpc8260ads          freesca
 PQ2FADS-ZU_lowboot           powerpc     mpc8260     mpc8260ads          freescale      -           MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000
 VoVPN-GW_66MHz               powerpc     mpc8260     vovpn-gw            funkwerk       -           VoVPN-GW:CLKIN_66MHz
 mgcoge                       powerpc     mpc8260     km82xx              keymile
-mgcoge2ne                    powerpc     mpc8260     km82xx              keymile
+mgcoge3ne                    powerpc     mpc8260     km82xx              keymile
 SCM                          powerpc     mpc8260     -                   siemens
 TQM8255_AA                   powerpc     mpc8260     tqm8260             tqc            -           TQM8260:MPC8255,300MHz
 TQM8260_AA                   powerpc     mpc8260     tqm8260             tqc            -           TQM8260:MPC8260,200MHz
diff --git a/include/configs/km82xx-common.h b/include/configs/km82xx-common.h
index 345212c..da551c9 100644
--- a/include/configs/km82xx-common.h
+++ b/include/configs/km82xx-common.h
@@ -243,13 +243,6 @@
 			 ORxG_SCY_5_CLK			|\
 			 ORxG_TRLX)
 
-
-/*
- * Bank 1 - 60x bus SDRAM
- */
-#define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(256 << 20)	/* less than 256 MB */
-
 #define CONFIG_SYS_MPTPR       0x1800
 
 /*
@@ -268,25 +261,6 @@
 #define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR1
 
 /*
- *  SDRAM initialization values
- */
-
-#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
-			 ORxS_BPD_8			|\
-			 ORxS_ROWST_PBI0_A7		|\
-			 ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5	|\
-			 PSDMR_BSMA_A14_A16	|\
-			 PSDMR_SDA10_PBI0_A9	|\
-			 PSDMR_RFRC_5_CLK	|\
-			 PSDMR_PRETOACT_2W	|\
-			 PSDMR_ACTTORW_2W	|\
-			 PSDMR_LDOTOPRE_1C	|\
-			 PSDMR_WRC_1C		|\
-			 PSDMR_CL_2)
-
-/*
  * UPIO FPGA (GPIO/PIGGY) on CS3 initialization values
  */
 #define CONFIG_SYS_KMBEC_FPGA_BASE	0x30000000
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 3d2ee24..93a6f4a 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -32,6 +32,7 @@
 #define CONFIG_MPC8247
 #define CONFIG_MGCOGE
 #define CONFIG_HOSTNAME		mgcoge
+#define CONFIG_KM_82XX
 
 #define	CONFIG_SYS_TEXT_BASE	0xFE000000
 
@@ -58,6 +59,32 @@
 					CONFIG_SYS_FLASH_BASE_2 }
 #define MTDIDS_DEFAULT		"nor3=app"
 
+/*
+ * Bank 1 - 60x bus SDRAM
+ */
+#define SDRAM_MAX_SIZE	0x08000000			/* max. 128 MB	*/
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(256 << 20)	/* less than 256 MB */
+
+/* SDRAM initialization values
+*/
+
+#define CONFIG_SYS_OR1    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \
+			 ORxS_SDAM_MSK) |\
+			 ORxS_BPD_8                     |\
+			 ORxS_ROWST_PBI0_A7		|\
+			 ORxS_NUMR_13)
+
+#define CONFIG_SYS_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
+			 PSDMR_BSMA_A14_A16           |\
+			 PSDMR_SDA10_PBI0_A9		|\
+			 PSDMR_RFRC_5_CLK               |\
+			 PSDMR_PRETOACT_2W              |\
+			 PSDMR_ACTTORW_2W               |\
+			 PSDMR_LDOTOPRE_1C              |\
+			 PSDMR_WRC_1C                   |\
+			 PSDMR_CL_2)
+
+
 /* include further common stuff for all keymile 82xx boards */
 #include "km82xx-common.h"
 
diff --git a/include/configs/mgcoge2ne.h b/include/configs/mgcoge3ne.h
index 287b717..f080619 100644
--- a/include/configs/mgcoge2ne.h
+++ b/include/configs/mgcoge3ne.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007-2010
+ * (C) Copyright 2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -21,16 +21,18 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __MGCOGE2NE
-#define __MGCOGE2NE
+#ifndef __MGCOGE3NE
+#define __MGCOGE3NE
 
 /*
  * High Level Configuration Options
  * (easy to change)
  */
+
 #define CONFIG_MPC8247
-#define CONFIG_MGCOGE
-#define CONFIG_HOSTNAME		mgcoge2ne
+#define CONFIG_MGCOGE3NE
+#define CONFIG_HOSTNAME		mgcoge3ne
+#define CONFIG_KM_82XX
 
 #define	CONFIG_SYS_TEXT_BASE	0xFE000000
 
@@ -43,22 +45,47 @@
 #define CONFIG_SYS_FLASH_SIZE		32
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/*
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/*
 						 * max num of sects on one
 						 * chip
 						 */
 
 #define CONFIG_SYS_FLASH_BASE_1	0x50000000
-#define CONFIG_SYS_FLASH_SIZE_1	64
-#define CONFIG_SYS_FLASH_SIZE_2	0
+#define CONFIG_SYS_FLASH_SIZE_1	128
+
+#define CONFIG_SYS_FLASH_SIZE_2 0	/* dummy value to calc SYS_OR5 */
 
 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
 					CONFIG_SYS_FLASH_BASE_1 }
 
 #define MTDIDS_DEFAULT		"nor2=app"
 
+/*
+ * Bank 1 - 60x bus SDRAM
+ * mgcoge3ne has 256M.
+ */
+#define SDRAM_MAX_SIZE 0x10000000			/* max. 256 MB	*/
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(512 << 20)	/* less than 512 MB */
+
+#define CONFIG_SYS_OR1    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \
+			ORxS_SDAM_MSK) |\
+			ORxS_BPD_4			|\
+			ORxS_ROWST_PBI1_A4		|\
+			ORxS_NUMR_13)
+
+#define CONFIG_SYS_PSDMR  (PSDMR_PBI				|\
+			PSDMR_SDAM_A17_IS_A5			|\
+			PSDMR_BSMA_A13_A15			|\
+			PSDMR_SDA10_PBI1_A6			|\
+			PSDMR_RFRC_5_CLK			|\
+			PSDMR_PRETOACT_2W			|\
+			PSDMR_ACTTORW_2W			|\
+			PSDMR_LDOTOPRE_1C			|\
+			PSDMR_WRC_2C				|\
+			PSDMR_CL_2)
+
 /* include further common stuff for all keymile 82xx boards */
 #include "km82xx-common.h"
 
-#endif /* __MGCOGE2NE */
+#endif /* __MGCOGE3NE */