Coding Style cleanup

Signed-off-by: Wolfgang Denk <wd@denx.de>

32 files changed, 117 insertions, 162 deletions

diff --git a/MAKEALL b/MAKEALL
index db11f13..c54c6e8 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -56,7 +56,7 @@ LONG_OPTS="arch:,cpu:,vendor:,soc:"
 
 # Option processing based on util-linux-2.13/getopt-parse.bash
 
-# Note that we use `"$@"' to let each command-line parameter expand to a 
+# Note that we use `"$@"' to let each command-line parameter expand to a
 # separate word. The quotes around `$@' are essential!
 # We need TEMP as the `eval set --' would nuke the return value of
 # getopt.
diff --git a/README b/README
index 3d87423..f559811 100644
--- a/README
+++ b/README
@@ -2364,11 +2364,11 @@ Configuration Settings:
 
 - CONFIG_ENV_MAX_ENTRIES
 
-        Maximum number of entries in the hash table that is used
-        internally to store the environment settings. The default
-        setting is supposed to be generous and should work in most
-        cases. This setting can be used to tune behaviour; see
-        lib/hashtable.c for details.
+	Maximum number of entries in the hash table that is used
+	internally to store the environment settings. The default
+	setting is supposed to be generous and should work in most
+	cases. This setting can be used to tune behaviour; see
+	lib/hashtable.c for details.
 
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/cpu/arm926ejs/kirkwood/dram.c
index 7439c87..342afe9 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/dram.c
@@ -93,4 +93,3 @@ void dram_init_banksize(void)
 	dram_init();
 }
 #endif /* CONFIG_SYS_BOARD_DRAM_INIT */
-
diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c
index 3ea3458..7d49cbb 100644
--- a/arch/arm/cpu/pxa/cpu.c
+++ b/arch/arm/cpu/pxa/cpu.c
@@ -312,7 +312,7 @@ void pxa_wakeup(void)
 int arch_cpu_init(void)
 {
 	pxa_gpio_setup();
-//	pxa_wait_ticks(0x8000);
+/*	pxa_wait_ticks(0x8000); */
 	pxa_wakeup();
 	pxa_interrupt_setup();
 	pxa_clock_setup();
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index d44903b..93a9efd 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -98,7 +98,7 @@ _start:
 	 * 0xC: 0xB808XXXX
 	 *
 	 * then it is necessary to count address for storing the most significant
-	 * 16bits from _exception_handler address and copy it to 
+	 * 16bits from _exception_handler address and copy it to
 	 * 0xa address. Big endian use offset in r10=0 that's why is it just
 	 * 0xa address. The same is done for the least significant 16 bits
 	 * for 0xe address.
diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c
index f38d0b0..19b3a94 100644
--- a/arch/sh/lib/bootm.c
+++ b/arch/sh/lib/bootm.c
@@ -109,7 +109,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 				ramdisk_flags |= RD_PROMPT;
 		else
 				ramdisk_flags &= ~RD_PROMPT;
-					
+
 		val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10);
 		if (val == 1)
 				ramdisk_flags |= RD_DOLOAD;
diff --git a/board/bct-brettl2/cled.c b/board/bct-brettl2/cled.c
index 9e73c57..dcb91bd 100644
--- a/board/bct-brettl2/cled.c
+++ b/board/bct-brettl2/cled.c
@@ -13,7 +13,7 @@
 
 int do_cled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	ulong addr = 0x20000000 + 0x200000; // AMS2
+	ulong addr = 0x20000000 + 0x200000; /* AMS2 */
 	uchar data;
 
 	if (argc < 2)
diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c
index f865eb4..656d5cd 100644
--- a/board/davedenx/qong/fpga.c
+++ b/board/davedenx/qong/fpga.c
@@ -92,4 +92,3 @@ int qong_fpga_init(void)
 }
 
 #endif
-
diff --git a/board/isee/igep0030/config.mk b/board/isee/igep0030/config.mk
index 35865e0..019f93f 100644
--- a/board/isee/igep0030/config.mk
+++ b/board/isee/igep0030/config.mk
@@ -31,4 +31,3 @@
 
 # For use with external or internal boots.
 TEXT_BASE = 0x80008000
-
diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c
index b7fa695..36e9146 100644
--- a/board/xes/common/fsl_8xxx_misc.c
+++ b/board/xes/common/fsl_8xxx_misc.c
@@ -52,11 +52,9 @@ uint get_board_derivative(void)
 #endif
 
        /*
-        * The top 4 lines of the local bus address are pulled low/high and
-        * can be read to determine the least significant digit of a board's
-        * model number.
-        */
+	* The top 4 lines of the local bus address are pulled low/high and
+	* can be read to determine the least significant digit of a board's
+	* model number.
+	*/
        return gur->gpporcr >> 28;
 }
-
-
diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c
index 718cd98..38a4597 100644
--- a/board/xes/xpedite550x/ddr.c
+++ b/board/xes/xpedite550x/ddr.c
@@ -55,16 +55,16 @@ unsigned int fsl_ddr_get_mem_data_rate(void)
  *     There are traditionally three board-specific SDRAM timing parameters
  *     which must be calculated based on the particular PCB artwork.  These are:
  *     1.) CPO (Read Capture Delay)
- *             - TIMING_CFG_2 register
- *             Source: Calculation based on board trace lengths and
- *                     chip-specific internal delays.
+ *	       - TIMING_CFG_2 register
+ *	       Source: Calculation based on board trace lengths and
+ *		       chip-specific internal delays.
  *     2.) CLK_ADJUST (Clock and Addr/Cmd alignment control)
- *             - DDR_SDRAM_CLK_CNTL register
- *             Source: Signal Integrity Simulations
+ *	       - DDR_SDRAM_CLK_CNTL register
+ *	       Source: Signal Integrity Simulations
  *     3.) 2T Timing on Addr/Ctl
- *             - TIMING_CFG_2 register
- *             Source: Signal Integrity Simulations
- *             Usually only needed with heavy load/very high speed (>DDR2-800)
+ *	       - TIMING_CFG_2 register
+ *	       Source: Signal Integrity Simulations
+ *	       Usually only needed with heavy load/very high speed (>DDR2-800)
  *
  *     ====== XPedite550x DDR3-800 read delay calculations ======
  *
@@ -82,14 +82,14 @@ typedef struct {
 const board_specific_parameters_t board_specific_parameters[][20] = {
 	{
 		/* Controller 0 */
-                {
+		{
 			/* DDR3-600/667 */
 			.datarate_mhz_low	= 500,
 			.datarate_mhz_high	= 750,
 			.clk_adjust		= 5,
 			.cpo			= 31,
 		},
-                {
+		{
 			/* DDR3-800 */
 			.datarate_mhz_low	= 750,
 			.datarate_mhz_high	= 850,
@@ -162,4 +162,3 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	popts->rtt_override = 1;
 	popts->rtt_override_value = 3;
 }
-
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation
index 3856633..dc7be7e 100644
--- a/doc/README.arm-relocation
+++ b/doc/README.arm-relocation
@@ -93,7 +93,7 @@ Relocation with NAND_SPL (example for the tx25):
   and start with code execution on this address.
 
 - The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c
-  which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE  and loads
+  which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE	and loads
   the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
   @CONFIG_SYS_NAND_U_BOOT_START
 
@@ -162,7 +162,7 @@ e) load new symbol table:
 
 (gdb) add-symbol-file u-boot 0x8ff08000
 add symbol table from file "u-boot" at
-        .text_addr = 0x8ff08000
+	.text_addr = 0x8ff08000
 (y or n) y
 Reading symbols from /home/hs/celf/u-boot/u-boot...done.
 (gdb) c
@@ -170,12 +170,12 @@ Continuing.
 ^C
 Program received signal SIGSTOP, Stopped (signal).
 0x8ff17f18 in serial_getc () at serial_mxc.c:192
-192             while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
+192		while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
 (gdb)
 
 add-symbol-file u-boot 0x8ff08000
-                       ^^^^^^^^^^
-                       get this address from u-boot debug printfs
+		       ^^^^^^^^^^
+		       get this address from u-boot debug printfs
 
 U-Boot 2010.06-rc2-00009-gf77b8b8-dirty (Jun 22 2010 - 09:43:46)
 
@@ -187,7 +187,7 @@ Top of RAM usable for U-Boot at: 90000000
 LCD panel info: 640 x 480, 16 bit/pix
 Reserving 600k for LCD Framebuffer at: 8ff6a000
 Reserving 391k for U-Boot at: 8ff08000
-                              ^^^^^^^^
+			      ^^^^^^^^
 Reserving 1280k for malloc() at: 8fdc8000
 Reserving 24 Bytes for Board Info at: 8fdc7fe8
 Reserving 52 Bytes for Global Data at: 8fdc7fb4
@@ -197,6 +197,6 @@ Bank #0: 80000000 256 MiB
 relocation Offset is: eff08000
 mon: 00058BAC gd->monLen: 00061F10
 Now running in RAM - U-Boot at: 8ff08000
-                                ^^^^^^^^
+				^^^^^^^^
 
 Now you can use gdb as usual :-)
diff --git a/drivers/fpga/lattice.c b/drivers/fpga/lattice.c
index a0e7823..c3b2355 100644
--- a/drivers/fpga/lattice.c
+++ b/drivers/fpga/lattice.c
@@ -395,5 +395,3 @@ int lattice_info(Lattice_desc *desc)
 
 	return ret_val;
 }
-
-
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 9271470..c7f7620 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -412,4 +412,3 @@ int omap_mmc_init(int dev_index)
 
 	return 0;
 }
-
diff --git a/drivers/serial/atmel_usart.h b/drivers/serial/atmel_usart.h
index 7cfc2d5..7e4b2c9 100644
--- a/drivers/serial/atmel_usart.h
+++ b/drivers/serial/atmel_usart.h
@@ -42,7 +42,7 @@ typedef struct atmel_usart3 {
 	u32	reserved1;
 	u32	ifr;
 	u32	man;
-	u32	reserved2[54]; // version and PDC not needed
+	u32	reserved2[54]; /* version and PDC not needed */
 } atmel_usart3_t;
 
 /* Bitfields in CR */
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index cf22629..f9163a8 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -116,4 +116,3 @@ int usb_gadget_config_buf(
 	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
 	return len;
 }
-
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 7cf3c67..1896489 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -302,4 +302,3 @@ void usb_ep_autoconfig_reset(struct usb_gadget *gadget)
 #endif
 	epnum = 0;
 }
-
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index b22ca90..5a18e03 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1968,4 +1968,3 @@ fail:
 	error("%s failed. error = %d", __func__, status);
 	return status;
 }
-
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 6e9d1bf..95555cf 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -137,4 +137,3 @@ usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf)
 	buf[1] = USB_DT_STRING;
 	return buf[0];
 }
-
diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index 20c119a..b5d20bd 100644
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -79,7 +79,7 @@
 #define CONFIG_SYS_XLB_PIPELINING	1
 
 #undef CONFIG_NET_MULTI
-#undef CONFIG_EEPRO100 
+#undef CONFIG_EEPRO100
 
 /* Partitions */
 #define CONFIG_MAC_PARTITION
diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h
index 09691d3..608ab9f 100644
--- a/include/configs/bct-brettl2.h
+++ b/include/configs/bct-brettl2.h
@@ -11,7 +11,7 @@
 /*
  * Processor Settings
  */
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
+#define CONFIG_BFIN_BOOT_MODE	    BFIN_BOOT_BYPASS
 
 
 /*
@@ -21,11 +21,11 @@
  */
 /* CONFIG_CLKIN_HZ is any value in Hz					*/
 #define CONFIG_CLKIN_HZ			16384000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
-/*                                                1 = CLKIN / 2		*/
+/* CLKIN_HALF controls the DF bit in PLL_CTL	  0 = CLKIN		*/
+/*						  1 = CLKIN / 2		*/
 #define CONFIG_CLKIN_HALF		0
 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
-/*                                                1 = bypass PLL	*/
+/*						  1 = bypass PLL	*/
 #define CONFIG_PLL_BYPASS		0
 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
 /* Values can range from 0-63 (where 0 means 64)			*/
@@ -36,7 +36,7 @@
 /* SCLK_DIV controls the system clock divider				*/
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			3
-#define CONFIG_VR_CTL_VAL       (VLEV_110 | GAIN_20 | FREQ_1000)
+#define CONFIG_VR_CTL_VAL	(VLEV_110 | GAIN_20 | FREQ_1000)
 
 
 /*
@@ -111,13 +111,13 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-        arch/blackfin/cpu/traps.o            (.text .text.*); \
-        arch/blackfin/cpu/interrupt.o        (.text .text.*); \
-        arch/blackfin/cpu/serial.o           (.text .text.*); \
-        common/dlmalloc.o               (.text .text.*); \
-        lib/crc32.o             (.text .text.*); \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o           (.text .text.*);
+	arch/blackfin/cpu/traps.o	     (.text .text.*); \
+	arch/blackfin/cpu/interrupt.o	     (.text .text.*); \
+	arch/blackfin/cpu/serial.o	     (.text .text.*); \
+	common/dlmalloc.o		(.text .text.*); \
+	lib/crc32.o		(.text .text.*); \
+	. = DEFINED(env_offset) ? env_offset : .; \
+	common/env_embedded.o		(.text .text.*);
 #endif
 
 
diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h
index 8b2bdc7..e4688a2 100644
--- a/include/configs/blackvme.h
+++ b/include/configs/blackvme.h
@@ -126,9 +126,9 @@
  * AX88180  WEN = 5 clocks  REN 6 clocks @ SCLK = 100 MHz
  * One extra clock needed because AX88180 is asynchronous to CPU.
  */
-                           /* bank 1   0 */
+			   /* bank 1   0 */
 #define CONFIG_EBIU_AMBCTL0_VAL 0xFFC2FFC2
-                           /* bank 3   2 */
+			   /* bank 3   2 */
 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC2FFC2
 
 /* memory layout */
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 21b7ec7..166da6c 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -60,8 +60,6 @@
 
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
-
-
 /*
  *  CS8900 Ethernet drivers
  */
@@ -79,7 +77,6 @@
 
 #define CONFIG_BAUDRATE		115200
 
-
 /*
  * BOOTP options
  */
@@ -88,7 +85,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -98,7 +94,6 @@
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_ELF
 
-
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"root=/dev/msdk mem=48M"
 #define CONFIG_BOOTFILE		"mx1ads"
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index 0641bef..1632ce8 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -34,7 +34,6 @@
 #undef	_CONFIG_UART4 /* internal uart 4 */
 #undef	CONFIG_SILENT_CONSOLE  /* use this to disable output */
 
-
 /*
  * BOOTP options
  */
@@ -43,7 +42,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -58,7 +56,6 @@
 #undef CONFIG_CMD_PING
 #undef CONFIG_CMD_SOURCE
 
-
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
  */
@@ -98,8 +95,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN	  (CONFIG_ENV_SIZE + (128<<10) )
 
-
-
 #define CONFIG_STACKSIZE	(120<<10)      /* stack size */
 
 #ifdef CONFIG_USE_IRQ
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index c0ae2d9..3da214e 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -35,7 +35,6 @@
  * Select serial console configuration
  */
 
-
 /*
  * BOOTP options
  */
@@ -44,7 +43,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -58,7 +56,6 @@
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_SOURCE
 
-
 /*
  * Boot options. Setting delay to -1 stops autostart count down.
  * NOTE: Sending parameters to kernel depends on kernel version and
@@ -100,14 +97,11 @@
 #define CONFIG_INITRD_TAG	     1	 /* send initrd params		     */
 #undef	CONFIG_VFD			 /* do not send framebuffer setup    */
 
-
 /*
  * Malloc pool need to host env + 128 Kb reserve for other allocations.
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128<<10) )
 
-
-
 #define CONFIG_STACKSIZE	(120<<10)      /* stack size		     */
 
 #ifdef CONFIG_USE_IRQ
@@ -134,15 +128,6 @@
 #define SCB9328_SDRAM_1_SIZE	0x01000000	/* 16 MB		   */
 
 /*
- * Flash Controller settings
- */
-
-/*
- * Hardware drivers
- */
-
-
-/*
  * Configuration for FLASH memory for the Synertronixx board
  */
 
diff --git a/include/lattice.h b/include/lattice.h
index 75729b6..e965663 100755
--- a/include/lattice.h
+++ b/include/lattice.h
@@ -317,4 +317,3 @@ void writePort(unsigned char pins, unsigned char value);
 unsigned char readPort(void);
 void sclock(void);
 #endif
-
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f4ac4bf..3858f8f 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -26,13 +26,13 @@ struct fb_fix_screeninfo {
 	__u32 type;			/* see FB_TYPE_*		*/
 	__u32 type_aux;			/* Interleave for interleaved Planes */
 	__u32 visual;			/* see FB_VISUAL_*		*/
-	__u16 xpanstep;			/* zero if no hardware panning  */
-	__u16 ypanstep;			/* zero if no hardware panning  */
-	__u16 ywrapstep;		/* zero if no hardware ywrap    */
-	__u32 line_length;		/* length of a line in bytes    */
-	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
+	__u16 xpanstep;			/* zero if no hardware panning	*/
+	__u16 ypanstep;			/* zero if no hardware panning	*/
+	__u16 ywrapstep;		/* zero if no hardware ywrap	*/
+	__u32 line_length;		/* length of a line in bytes	*/
+	unsigned long mmio_start;	/* Start of Memory Mapped I/O	*/
 					/* (physical address) */
-	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
+	__u32 mmio_len;			/* Length of Memory Mapped I/O	*/
 	__u32 accel;			/* Indicate to driver which	*/
 					/*  specific chip/card we have	*/
 	__u16 reserved[3];		/* Reserved for future compatibility */
@@ -56,7 +56,7 @@ struct fb_bitfield {
 
 };
 
-#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
+#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)	*/
 #define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
 
 #define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
@@ -64,38 +64,38 @@ struct fb_bitfield {
 #define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
 #define FB_ACTIVATE_MASK       15
 					/* values			*/
-#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
+#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl	*/
 #define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
 #define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
 #define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
-#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
+#define FB_ACTIVATE_INV_MODE  256	/* invalidate videomode */
 
 #define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
 #define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
 #define FB_SYNC_EXT		4	/* external sync		*/
-#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
-#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
+#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active	*/
+#define FB_SYNC_BROADCAST	16	/* broadcast video timings	*/
 					/* vtotal = 144d/288n/576i => PAL  */
 					/* vtotal = 121d/242n/484i => NTSC */
 #define FB_SYNC_ON_GREEN	32	/* sync on green */
 
-#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
+#define FB_VMODE_NONINTERLACED	0	/* non interlaced */
 #define FB_VMODE_INTERLACED	1	/* interlaced	*/
 #define FB_VMODE_DOUBLE		2	/* double scan */
 #define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
 #define FB_VMODE_MASK		255
 
-#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
+#define FB_VMODE_YWRAP		256	/* ywrap instead of panning	*/
 #define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
 #define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
 
 /*
  * Display rotation support
  */
-#define FB_ROTATE_UR      0
-#define FB_ROTATE_CW      1
-#define FB_ROTATE_UD      2
-#define FB_ROTATE_CCW     3
+#define FB_ROTATE_UR	  0
+#define FB_ROTATE_CW	  1
+#define FB_ROTATE_UD	  2
+#define FB_ROTATE_CCW	  3
 
 #define PICOS2KHZ(a) (1000000000UL/(a))
 #define KHZ2PICOS(a) (1000000000UL/(a))
@@ -154,10 +154,10 @@ struct fb_con2fbmap {
 };
 
 /* VESA Blanking Levels */
-#define VESA_NO_BLANKING        0
-#define VESA_VSYNC_SUSPEND      1
-#define VESA_HSYNC_SUSPEND      2
-#define VESA_POWERDOWN          3
+#define VESA_NO_BLANKING	0
+#define VESA_VSYNC_SUSPEND	1
+#define VESA_HSYNC_SUSPEND	2
+#define VESA_POWERDOWN		3
 
 
 enum {
@@ -234,12 +234,12 @@ struct fb_image {
  */
 
 #define FB_CUR_SETIMAGE 0x01
-#define FB_CUR_SETPOS   0x02
-#define FB_CUR_SETHOT   0x04
-#define FB_CUR_SETCMAP  0x08
+#define FB_CUR_SETPOS	0x02
+#define FB_CUR_SETHOT	0x04
+#define FB_CUR_SETCMAP	0x08
 #define FB_CUR_SETSHAPE 0x10
 #define FB_CUR_SETSIZE	0x20
-#define FB_CUR_SETALL   0xFF
+#define FB_CUR_SETALL	0xFF
 
 struct fbcurpos {
 	__u16 x, y;
@@ -377,29 +377,29 @@ struct fb_cursor_user {
  *	if you own it
  */
 #define FB_EVENT_RESUME			0x03
-/*      An entry from the modelist was removed */
-#define FB_EVENT_MODE_DELETE            0x04
-/*      A driver registered itself */
-#define FB_EVENT_FB_REGISTERED          0x05
-/*      A driver unregistered itself */
-#define FB_EVENT_FB_UNREGISTERED        0x06
-/*      CONSOLE-SPECIFIC: get console to framebuffer mapping */
-#define FB_EVENT_GET_CONSOLE_MAP        0x07
-/*      CONSOLE-SPECIFIC: set console to framebuffer mapping */
-#define FB_EVENT_SET_CONSOLE_MAP        0x08
-/*      A hardware display blank change occured */
-#define FB_EVENT_BLANK                  0x09
-/*      Private modelist is to be replaced */
-#define FB_EVENT_NEW_MODELIST           0x0A
+/*	An entry from the modelist was removed */
+#define FB_EVENT_MODE_DELETE		0x04
+/*	A driver registered itself */
+#define FB_EVENT_FB_REGISTERED		0x05
+/*	A driver unregistered itself */
+#define FB_EVENT_FB_UNREGISTERED	0x06
+/*	CONSOLE-SPECIFIC: get console to framebuffer mapping */
+#define FB_EVENT_GET_CONSOLE_MAP	0x07
+/*	CONSOLE-SPECIFIC: set console to framebuffer mapping */
+#define FB_EVENT_SET_CONSOLE_MAP	0x08
+/*	A hardware display blank change occured */
+#define FB_EVENT_BLANK			0x09
+/*	Private modelist is to be replaced */
+#define FB_EVENT_NEW_MODELIST		0x0A
 /*	The resolution of the passed in fb_info about to change and
-        all vc's should be changed         */
+	all vc's should be changed	   */
 #define FB_EVENT_MODE_CHANGE_ALL	0x0B
 /*	A software display blank change occured */
-#define FB_EVENT_CONBLANK               0x0C
-/*      Get drawing requirements        */
-#define FB_EVENT_GET_REQ                0x0D
-/*      Unbind from the console if possible */
-#define FB_EVENT_FB_UNBIND              0x0E
+#define FB_EVENT_CONBLANK		0x0C
+/*	Get drawing requirements	*/
+#define FB_EVENT_GET_REQ		0x0D
+/*	Unbind from the console if possible */
+#define FB_EVENT_FB_UNBIND		0x0E
 
 struct fb_event {
 	struct fb_info *info;
@@ -421,10 +421,10 @@ struct fb_blit_caps {
  * format the hardware needs.
  */
 
-#define FB_PIXMAP_DEFAULT 1     /* used internally by fbcon */
-#define FB_PIXMAP_SYSTEM  2     /* memory is in system RAM  */
-#define FB_PIXMAP_IO      4     /* memory is iomapped       */
-#define FB_PIXMAP_SYNC    256   /* set if GPU can DMA       */
+#define FB_PIXMAP_DEFAULT 1	/* used internally by fbcon */
+#define FB_PIXMAP_SYSTEM  2	/* memory is in system RAM  */
+#define FB_PIXMAP_IO	  4	/* memory is iomapped	    */
+#define FB_PIXMAP_SYNC	  256	/* set if GPU can DMA	    */
 
 struct fb_pixmap {
 	u8  *addr;		/* pointer to memory			*/
@@ -434,10 +434,10 @@ struct fb_pixmap {
 	u32 scan_align;		/* alignment per scanline		*/
 	u32 access_align;	/* alignment per read/write (bits)	*/
 	u32 flags;		/* see FB_PIXMAP_*			*/
-	u32 blit_x;             /* supported bit block dimensions (1-32)*/
-	u32 blit_y;             /* Format: blit_x = 1 << (width - 1)    */
-	                        /*         blit_y = 1 << (height - 1)   */
-	                        /* if 0, will be set to 0xffffffff (all)*/
+	u32 blit_x;		/* supported bit block dimensions (1-32)*/
+	u32 blit_y;		/* Format: blit_x = 1 << (width - 1)	*/
+				/*	   blit_y = 1 << (height - 1)	*/
+				/* if 0, will be set to 0xffffffff (all)*/
 	/* access methods */
 	void (*writeio)(struct fb_info *info, void *dst, void *src, unsigned int size);
 	void (*readio) (struct fb_info *info, void *dst, void *src, unsigned int size);
@@ -488,7 +488,7 @@ struct fb_deferred_io {
  * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag
  * and host endianness. Drivers should not use this flag.
  */
-#define FBINFO_BE_MATH  0x100000
+#define FBINFO_BE_MATH	0x100000
 
 struct fb_info {
 	int node;
@@ -499,7 +499,7 @@ struct fb_info {
 	struct fb_pixmap pixmap;	/* Image hardware mapper */
 	struct fb_pixmap sprite;	/* Cursor hardware mapper */
 	struct fb_cmap cmap;		/* Current cmap */
-	struct list_head modelist;      /* mode list */
+	struct list_head modelist;	/* mode list */
 	struct fb_videomode *mode;	/* current mode */
 
 	char *screen_base;	/* Virtual address */
@@ -508,7 +508,7 @@ struct fb_info {
 #define FBINFO_STATE_RUNNING	0
 #define FBINFO_STATE_SUSPENDED	1
 	u32 state;			/* Hardware state i.e suspend */
-	void *fbcon_par;                /* fbcon use-only private area */
+	void *fbcon_par;		/* fbcon use-only private area */
 	/* From here on everything is device dependent */
 	void *par;
 };
@@ -518,14 +518,14 @@ struct fb_info {
 #define FBINFO_FLAG_MODULE	FBINFO_MODULE
 #define FBINFO_FLAG_DEFAULT	FBINFO_DEFAULT
 
-// This will go away
+/* This will go away */
 #if defined(__sparc__)
 
 /* We map all of our framebuffers such that big-endian accesses
  * are what we want, so the following is sufficient.
  */
 
-// This will go away
+/* This will go away */
 #define fb_readb sbus_readb
 #define fb_readw sbus_readw
 #define fb_readl sbus_readl
@@ -562,7 +562,7 @@ struct fb_info {
 
 #endif
 
-#define FB_LEFT_POS(p, bpp)          (fb_be_math(p) ? (32 - (bpp)) : 0)
+#define FB_LEFT_POS(p, bpp)	     (fb_be_math(p) ? (32 - (bpp)) : 0)
 #define FB_SHIFT_HIGH(p, val, bits)  (fb_be_math(p) ? (val) >> (bits) : \
 						      (val) << (bits))
 #define FB_SHIFT_LOW(p, val, bits)   (fb_be_math(p) ? (val) << (bits) : \
@@ -580,7 +580,7 @@ struct fb_info {
 #define FB_MODE_IS_VESA		4
 #define FB_MODE_IS_CALCULATED	8
 #define FB_MODE_IS_FIRST	16
-#define FB_MODE_IS_FROM_VAR     32
+#define FB_MODE_IS_FROM_VAR	32
 
 
 /* drivers/video/fbcmap.c */
diff --git a/include/linux/kbuild.h b/include/linux/kbuild.h
index be76384..ab7805a 100644
--- a/include/linux/kbuild.h
+++ b/include/linux/kbuild.h
@@ -7,7 +7,7 @@
 #define __LINUX_KBUILD_H
 
 #define DEFINE(sym, val) \
-        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
 
 #define BLANK() asm volatile("\n->" : : )
 
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 03541cb..2967284 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -9,8 +9,6 @@
  *                      Remy Bohmer <linux@bohmer.net>
  */
 
-
-
 #define USB_CDC_SUBCLASS_ACM			0x02
 #define USB_CDC_SUBCLASS_ETHERNET		0x06
 #define USB_CDC_SUBCLASS_WHCM			0x08
@@ -199,7 +197,6 @@ struct usb_cdc_line_coding {
 #define	USB_CDC_PACKET_TYPE_BROADCAST		(1 << 3)
 #define	USB_CDC_PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
 
-
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -221,4 +218,3 @@ struct usb_cdc_notification {
 	__le16	wIndex;
 	__le16	wLength;
 } __attribute__ ((packed));
-
diff --git a/lib/hashtable.c b/lib/hashtable.c
index 57802cf..7ac3ddd 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -56,7 +56,7 @@
 
 /*
  * [Aho,Sethi,Ullman] Compilers: Principles, Techniques and Tools, 1986
- * [Knuth]            The Art of Computer Programming, part 3 (6.4)
+ * [Knuth]	      The Art of Computer Programming, part 3 (6.4)
  */
 
 /*
@@ -252,7 +252,7 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval,
 
 	if (htab->table[idx].used) {
 		/*
-                 * Further action might be required according to the
+		 * Further action might be required according to the
 		 * action value.
 		 */
 		unsigned hval2;
@@ -283,8 +283,8 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval,
 
 		do {
 			/*
-                         * Because SIZE is prime this guarantees to
-                         * step through all available indices.
+			 * Because SIZE is prime this guarantees to
+			 * step through all available indices.
 			 */
 			if (idx <= hval2)
 				idx = htab->size + idx - hval2;
@@ -323,8 +323,8 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval,
 	/* An empty bucket has been found. */
 	if (action == ENTER) {
 		/*
-                 * If table is full and another entry should be
-                 * entered return with error.
+		 * If table is full and another entry should be
+		 * entered return with error.
 		 */
 		if (htab->filled == htab->size) {
 			__set_errno(ENOMEM);
diff --git a/lib/qsort.c b/lib/qsort.c
index bb47319..e771dcf 100644
--- a/lib/qsort.c
+++ b/lib/qsort.c
@@ -23,9 +23,9 @@
 #endif
 
 void qsort(void  *base,
-           size_t nel,
-           size_t width,
-           int (*comp)(const void *, const void *))
+	   size_t nel,
+	   size_t width,
+	   int (*comp)(const void *, const void *))
 {
 	size_t wgap, i, j, k;
 	char tmp;
diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c
index 3067548..501369b 100644
--- a/post/board/lwmon5/fpga.c
+++ b/post/board/lwmon5/fpga.c
@@ -227,8 +227,6 @@ static int fpga_mem_test(void)
 	return ret;
 }
 
-
-
 /* Verify FPGA addresslines */
 static int fpga_post_addrline(ulong *address, ulong *base, ulong size)
 {