Merge branch 'master' of git://git.denx.de/u-boot-arm

52 files changed, 5315 insertions, 16 deletions

diff --git a/MAKEALL b/MAKEALL
index dd635bd..afdc1b5 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -574,6 +574,10 @@ LIST_ARM9="			\
 	sheevaplug		\
 	smdk2400		\
 	smdk2410		\
+	spear300		\
+	spear310		\
+	spear320		\
+	spear600		\
 	trab			\
 	VCMA9			\
 	versatile		\
diff --git a/Makefile b/Makefile
index 793fcec..255c3b6 100644
--- a/Makefile
+++ b/Makefile
@@ -3028,6 +3028,14 @@ smdk2400_config	:	unconfig
 smdk2410_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
 
+spear300_config \
+spear310_config \
+spear320_config :	unconfig
+	@$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear
+
+spear600_config :	unconfig
+	@$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear
+
 SX1_stdout_serial_config \
 SX1_config:		unconfig
 	@mkdir -p $(obj)include
diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c
index efba60d..a1b66cb 100644
--- a/board/esd/meesc/meesc.c
+++ b/board/esd/meesc/meesc.c
@@ -219,6 +219,32 @@ u32 get_board_rev(void)
 }
 #endif
 
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	char *str;
+	char buf[32];
+
+	/*
+	 * Normally the processor clock has a divisor of 2.
+	 * In some cases this this needs to be set to 4.
+	 * Check the user has set environment mdiv to 4 to change the divisor.
+	 */
+	if ((str = getenv("mdiv")) && (strcmp(str, "4") == 0)) {
+		at91_sys_write(AT91_PMC_MCKR,
+			(at91_sys_read(AT91_PMC_MCKR) & ~AT91_PMC_MDIV) |
+			AT91SAM9_PMC_MDIV_4);
+		at91_clock_init(0);
+		serial_setbrg();
+		/* Notify the user that the clock is not default */
+		printf("Setting master clock to %s MHz\n",
+			strmhz(buf, get_mck_clk_rate()));
+	}
+
+	return 0;
+}
+#endif /* CONFIG_MISC_INIT_R */
+
 int board_init(void)
 {
 	/* Peripheral Clock Enable Register */
diff --git a/board/spear/common/Makefile b/board/spear/common/Makefile
new file mode 100644
index 0000000..4f8959f
--- /dev/null
+++ b/board/spear/common/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+endif
+
+LIB	= $(obj)lib$(VENDOR).a
+
+COBJS	:= spr_misc.o
+SOBJS	:= spr_lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/spear/common/spr_lowlevel_init.S b/board/spear/common/spr_lowlevel_init.S
new file mode 100755
index 0000000..6fbe579
--- /dev/null
+++ b/board/spear/common/spr_lowlevel_init.S
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2006
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+/*
+ * platform specific initializations are already done in Xloader
+ * Initializations already done include
+ * DDR, PLLs, IP's clock enable and reset release etc
+ */
+.globl lowlevel_init
+lowlevel_init:
+	/* By default, U-Boot switches CPU to low-vector */
+	/* Revert this as we work in high vector even in U-Boot */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #0x00002000
+	mcr	p15, 0, r0, c1, c0, 0
+	mov	pc, lr
+
+/* void setfreq(unsigned int device, unsigned int frequency) */
+.global setfreq
+setfreq:
+	stmfd 	sp!,{r14}
+	stmfd 	sp!,{r0-r12}
+
+	mov  	r8,sp
+	ldr 	sp,SRAM_STACK_V
+
+	/* Saving the function arguements for later use */
+	mov  	r4,r0
+	mov  	r5,r1
+
+	/* Putting DDR into self refresh */
+	ldr 	r0,DDR_07_V
+	ldr	r1,[r0]
+	ldr	r2,DDR_ACTIVE_V
+	bic	r1, r1, r2
+	str	r1,[r0]
+	ldr 	r0,DDR_57_V
+	ldr	r1,[r0]
+	ldr	r2,CYCLES_MASK_V
+	bic	r1, r1, r2
+	ldr	r2,REFRESH_CYCLES_V
+	orr	r1, r1, r2, lsl #16
+	str	r1,[r0]
+	ldr 	r0,DDR_07_V
+	ldr	r1,[r0]
+	ldr	r2,SREFRESH_MASK_V
+	orr	r1, r1, r2
+	str	r1,[r0]
+
+	/* flush pipeline */
+	b	flush
+	.align 5
+flush:
+	/* Delay to ensure self refresh mode */
+	ldr	r0,SREFRESH_DELAY_V
+delay:
+	sub	r0,r0,#1
+	cmp	r0,#0
+	bne	delay
+
+	/* Putting system in slow mode */
+	ldr	r0,SCCTRL_V
+	mov	r1,#2
+	str	r1,[r0]
+
+	/* Changing PLL(1/2) frequency */
+	mov	r0,r4
+	mov	r1,r5
+
+	cmp	r4,#0
+	beq	pll1_freq
+
+	/* Change PLL2 (DDR frequency) */
+	ldr	r6,PLL2_FREQ_V
+	ldr	r7,PLL2_CNTL_V
+	b	pll2_freq
+
+pll1_freq:
+	/* Change PLL1 (CPU frequency) */
+	ldr	r6,PLL1_FREQ_V
+	ldr	r7,PLL1_CNTL_V
+
+pll2_freq:
+	mov	r0,r6
+	ldr	r1,[r0]
+	ldr	r2,PLLFREQ_MASK_V
+	bic	r1,r1,r2
+	mov	r2,r5,lsr#1
+	orr	r1,r1,r2,lsl#24
+	str	r1,[r0]
+
+	mov	r0,r7
+	ldr	r1,P1C0A_V
+	str	r1,[r0]
+	ldr	r1,P1C0E_V
+	str	r1,[r0]
+	ldr	r1,P1C06_V
+	str	r1,[r0]
+	ldr	r1,P1C0E_V
+	str	r1,[r0]
+
+lock:
+	ldr	r1,[r0]
+	and	r1,r1,#1
+	cmp	r1,#0
+	beq	lock
+
+	/* Putting system back to normal mode */
+	ldr	r0,SCCTRL_V
+	mov	r1,#4
+	str	r1,[r0]
+
+	/* Putting DDR back to normal */
+	ldr	r0,DDR_07_V
+	ldr	r1,[R0]
+	ldr	r2,SREFRESH_MASK_V
+	bic	r1, r1, r2
+	str	r1,[r0]
+	ldr	r2,DDR_ACTIVE_V
+	orr	r1, r1, r2
+	str	r1,[r0]
+
+	/* Delay to ensure self refresh mode */
+	ldr	r0,SREFRESH_DELAY_V
+1:
+	sub	r0,r0,#1
+	cmp	r0,#0
+	bne	1b
+
+	mov	sp,r8
+	/* Resuming back to code */
+	ldmia	sp!,{r0-r12}
+	ldmia	sp!,{pc}
+
+SCCTRL_V:
+	.word 0xfca00000
+PLL1_FREQ_V:
+	.word 0xfca8000C
+PLL1_CNTL_V:
+	.word 0xfca80008
+PLL2_FREQ_V:
+	.word 0xfca80018
+PLL2_CNTL_V:
+	.word 0xfca80014
+PLLFREQ_MASK_V:
+	.word 0xff000000
+P1C0A_V:
+	.word 0x1C0A
+P1C0E_V:
+	.word 0x1C0E
+P1C06_V:
+	.word 0x1C06
+
+SREFRESH_DELAY_V:
+	.word 0x9999
+SRAM_STACK_V:
+	.word 0xD2800600
+DDR_07_V:
+	.word 0xfc60001c
+DDR_ACTIVE_V:
+	.word 0x01000000
+DDR_57_V:
+	.word 0xfc6000e4
+CYCLES_MASK_V:
+	.word 0xffff0000
+REFRESH_CYCLES_V:
+	.word 0xf0f0
+SREFRESH_MASK_V:
+	.word 0x00010000
+
+.global setfreq_sz
+setfreq_sz:
+	.word setfreq_sz - setfreq
diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
new file mode 100755
index 0000000..e356912
--- /dev/null
+++ b/board/spear/common/spr_misc.c
@@ -0,0 +1,296 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_emi.h>
+#include <asm/arch/spr_xloader_table.h>
+#include <asm/arch/spr_defs.h>
+
+#define CPU		0
+#define DDR		1
+#define SRAM_REL	0xD2801000
+
+DECLARE_GLOBAL_DATA_PTR;
+static struct chip_data chip_data;
+
+int dram_init(void)
+{
+	struct xloader_table *xloader_tb =
+	    (struct xloader_table *)XLOADER_TABLE_ADDRESS;
+	struct xloader_table_1_1 *table_1_1;
+	struct xloader_table_1_2 *table_1_2;
+	struct chip_data *chip = &chip_data;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1,
+					       PHYS_SDRAM_1_MAXSIZE);
+
+	if (XLOADER_TABLE_VERSION_1_1 == xloader_tb->table_version) {
+		table_1_1 = &xloader_tb->table.table_1_1;
+		chip->dramfreq = table_1_1->ddrfreq;
+		chip->dramtype = table_1_1->ddrtype;
+
+	} else if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) {
+		table_1_2 = &xloader_tb->table.table_1_2;
+		chip->dramfreq = table_1_2->ddrfreq;
+		chip->dramtype = table_1_2->ddrtype;
+	} else {
+		chip->dramfreq = -1;
+	}
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#if defined(CONFIG_CMD_NET)
+	uchar mac_id[6];
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
+		eth_setenv_enetaddr("ethaddr", mac_id);
+#endif
+	setenv("verify", "n");
+
+#if defined(CONFIG_SPEAR_USBTTY)
+	setenv("stdin", "usbtty");
+	setenv("stdout", "usbtty");
+	setenv("stderr", "usbtty");
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_SPEAR_EMI
+struct cust_emi_para {
+	unsigned int tap;
+	unsigned int tsdp;
+	unsigned int tdpw;
+	unsigned int tdpr;
+	unsigned int tdcs;
+};
+
+/* EMI timing setting of m28w640hc of linux kernel */
+const struct cust_emi_para emi_timing_m28w640hc = {
+	.tap = 0x10,
+	.tsdp = 0x05,
+	.tdpw = 0x0a,
+	.tdpr = 0x0a,
+	.tdcs = 0x05,
+};
+
+/* EMI timing setting of bootrom */
+const struct cust_emi_para emi_timing_bootrom = {
+	.tap = 0xf,
+	.tsdp = 0x0,
+	.tdpw = 0xff,
+	.tdpr = 0x111,
+	.tdcs = 0x02,
+};
+
+void spear_emi_init(void)
+{
+	const struct cust_emi_para *p = &emi_timing_m28w640hc;
+	struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
+	unsigned int cs;
+	unsigned int val, tmp;
+
+	val = readl(CONFIG_SPEAR_RASBASE);
+
+	if (val & EMI_ACKMSK)
+		tmp = 0x3f;
+	else
+		tmp = 0x0;
+
+	writel(tmp, &emi_regs_p->ack);
+
+	for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
+		writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
+		writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
+		writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
+		writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
+		writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
+		writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
+		       &emi_regs_p->bank_regs[cs].control);
+	}
+}
+#endif
+
+int spear_board_init(ulong mach_type)
+{
+	struct xloader_table *xloader_tb =
+	    (struct xloader_table *)XLOADER_TABLE_ADDRESS;
+	struct xloader_table_1_2 *table_1_2;
+	struct chip_data *chip = &chip_data;
+
+	gd->bd->bi_arch_number = mach_type;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
+
+	/* CPU is initialized to work at 333MHz in Xloader */
+	chip->cpufreq = 333;
+
+	if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) {
+		table_1_2 = &xloader_tb->table.table_1_2;
+		memcpy(chip->version, table_1_2->version,
+		       sizeof(chip->version));
+	}
+
+#ifdef CONFIG_SPEAR_EMI
+	spear_emi_init();
+#endif
+	return 0;
+}
+
+static int i2c_read_mac(uchar *buffer)
+{
+	u8 buf[2];
+
+	i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	/* Check if mac in i2c memory is valid */
+	if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
+		/* Valid mac address is saved in i2c eeprom */
+		i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
+		return 0;
+	}
+
+	return -1;
+}
+
+static int write_mac(uchar *mac)
+{
+	u8 buf[2];
+
+	buf[0] = (u8)MAGIC_BYTE0;
+	buf[1] = (u8)MAGIC_BYTE1;
+	i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	buf[0] = (u8)~MAGIC_BYTE0;
+	buf[1] = (u8)~MAGIC_BYTE1;
+
+	i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+	/* check if valid MAC address is saved in I2C EEPROM or not? */
+	if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
+		i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
+		puts("I2C EEPROM written with mac address \n");
+		return 0;
+	}
+
+	puts("I2C EEPROM writing failed \n");
+	return -1;
+}
+
+int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	void (*sram_setfreq) (unsigned int, unsigned int);
+	struct chip_data *chip = &chip_data;
+	unsigned char mac[6];
+	unsigned int reg, frequency;
+	char *s, *e;
+	char i2c_mac[20];
+
+	if ((argc > 3) || (argc < 2)) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
+
+		frequency = simple_strtoul(argv[2], NULL, 0);
+
+		if (frequency > 333) {
+			printf("Frequency is limited to 333MHz\n");
+			return 1;
+		}
+
+		sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
+
+		if (!strcmp(argv[1], "cpufreq")) {
+			sram_setfreq(CPU, frequency);
+			printf("CPU frequency changed to %u\n", frequency);
+
+			chip->cpufreq = frequency;
+		} else {
+			sram_setfreq(DDR, frequency);
+			printf("DDR frequency changed to %u\n", frequency);
+
+			chip->dramfreq = frequency;
+		}
+
+		return 0;
+	} else if (!strcmp(argv[1], "ethaddr")) {
+
+		s = argv[2];
+		for (reg = 0; reg < 6; ++reg) {
+			mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+		write_mac(mac);
+
+		return 0;
+	} else if (!strcmp(argv[1], "print")) {
+
+		if (chip->cpufreq == -1)
+			printf("CPU Freq    = Not Known\n");
+		else
+			printf("CPU Freq    = %d MHz\n", chip->cpufreq);
+
+		if (chip->dramfreq == -1)
+			printf("DDR Freq    = Not Known\n");
+		else
+			printf("DDR Freq    = %d MHz\n", chip->dramfreq);
+
+		if (chip->dramtype == DDRMOBILE)
+			printf("DDR Type    = MOBILE\n");
+		else if (chip->dramtype == DDR2)
+			printf("DDR Type    = DDR2\n");
+		else
+			printf("DDR Type    = Not Known\n");
+
+		if (!i2c_read_mac(mac)) {
+			sprintf(i2c_mac, "%pM", mac);
+			printf("Ethaddr (from i2c mem) = %s\n", i2c_mac);
+		} else {
+			printf("Ethaddr (from i2c mem) = Not set\n");
+		}
+
+		printf("Xloader Rev = %s\n", chip->version);
+
+		return 0;
+	}
+
+	cmd_usage(cmdtp);
+	return 1;
+}
+
+U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
+	   "configure chip",
+	   "chip_config cpufreq/ddrfreq frequency\n"
+	   "chip_config print");
diff --git a/board/spear/spear300/Makefile b/board/spear/spear300/Makefile
new file mode 100755
index 0000000..b5168ff
--- /dev/null
+++ b/board/spear/spear300/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= spear300.o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/spear/spear300/config.mk b/board/spear/spear300/config.mk
new file mode 100755
index 0000000..35646f2
--- /dev/null
+++ b/board/spear/spear300/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2009
+# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#########################################################################
+
+TEXT_BASE = 0x00700000
+
+ALL += $(obj)u-boot.img
+
+# Environment variables in NAND
+ifeq ($(ENV),NAND)
+PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
+else
+PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
+endif
+
+ifeq ($(CONSOLE),USB)
+PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
+endif
diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c
new file mode 100755
index 0000000..60ee544
--- /dev/null
+++ b/board/spear/spear300/spear300.c
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_defs.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_nand.h>
+
+int board_init(void)
+{
+	return spear_board_init(MACH_TYPE_SPEAR300);
+}
+
+/*
+ * board_nand_init - Board specific NAND initialization
+ * @nand:	mtd private chip structure
+ *
+ * Called by nand_init_chip to initialize the board specific functions
+ */
+
+int board_nand_init(struct nand_chip *nand)
+{
+	struct misc_regs *const misc_regs_p =
+	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
+	     MISC_SOCCFG30) ||
+	    ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
+	     MISC_SOCCFG31)) {
+
+		return spear_nand_init(nand);
+	}
+
+	return -1;
+}
diff --git a/board/spear/spear310/Makefile b/board/spear/spear310/Makefile
new file mode 100755
index 0000000..e67e941
--- /dev/null
+++ b/board/spear/spear310/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= spear310.o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/spear/spear310/config.mk b/board/spear/spear310/config.mk
new file mode 100755
index 0000000..cba8436
--- /dev/null
+++ b/board/spear/spear310/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2009
+# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#########################################################################
+
+TEXT_BASE = 0x00700000
+
+ALL += $(obj)u-boot.img
+
+# Environment variables in NAND
+ifeq ($(ENV),NAND)
+PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
+else
+PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
+endif
+
+# Support parallel flash
+ifeq ($(FLASH),PNOR)
+PLATFORM_RELFLAGS += -DCONFIG_FLASH_PNOR
+endif
+
+ifeq ($(CONSOLE),USB)
+PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
+endif
diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c
new file mode 100755
index 0000000..756aa56
--- /dev/null
+++ b/board/spear/spear310/spear310.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2009
+ * Ryan Chen, ST Micoelectronics, ryan.chen@st.com.
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_defs.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_nand.h>
+
+int board_init(void)
+{
+	return spear_board_init(MACH_TYPE_SPEAR300);
+}
+
+/*
+ * board_nand_init - Board specific NAND initialization
+ * @nand:	mtd private chip structure
+ *
+ * Called by nand_init_chip to initialize the board specific functions
+ */
+
+int board_nand_init(struct nand_chip *nand)
+{
+	struct misc_regs *const misc_regs_p =
+	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
+	     MISC_SOCCFG30) ||
+	    ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
+	     MISC_SOCCFG31)) {
+
+		return spear_nand_init(nand);
+	}
+
+	return -1;
+}
diff --git a/board/spear/spear320/Makefile b/board/spear/spear320/Makefile
new file mode 100755
index 0000000..1b80586
--- /dev/null
+++ b/board/spear/spear320/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= spear320.o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/spear/spear320/config.mk b/board/spear/spear320/config.mk
new file mode 100755
index 0000000..cba8436
--- /dev/null
+++ b/board/spear/spear320/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2009
+# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#########################################################################
+
+TEXT_BASE = 0x00700000
+
+ALL += $(obj)u-boot.img
+
+# Environment variables in NAND
+ifeq ($(ENV),NAND)
+PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
+else
+PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
+endif
+
+# Support parallel flash
+ifeq ($(FLASH),PNOR)
+PLATFORM_RELFLAGS += -DCONFIG_FLASH_PNOR
+endif
+
+ifeq ($(CONSOLE),USB)
+PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
+endif
diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c
new file mode 100755
index 0000000..756aa56
--- /dev/null
+++ b/board/spear/spear320/spear320.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2009
+ * Ryan Chen, ST Micoelectronics, ryan.chen@st.com.
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_defs.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_nand.h>
+
+int board_init(void)
+{
+	return spear_board_init(MACH_TYPE_SPEAR300);
+}
+
+/*
+ * board_nand_init - Board specific NAND initialization
+ * @nand:	mtd private chip structure
+ *
+ * Called by nand_init_chip to initialize the board specific functions
+ */
+
+int board_nand_init(struct nand_chip *nand)
+{
+	struct misc_regs *const misc_regs_p =
+	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
+	     MISC_SOCCFG30) ||
+	    ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
+	     MISC_SOCCFG31)) {
+
+		return spear_nand_init(nand);
+	}
+
+	return -1;
+}
diff --git a/board/spear/spear600/Makefile b/board/spear/spear600/Makefile
new file mode 100755
index 0000000..1978002
--- /dev/null
+++ b/board/spear/spear600/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= spear600.o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/spear/spear600/config.mk b/board/spear/spear600/config.mk
new file mode 100755
index 0000000..35646f2
--- /dev/null
+++ b/board/spear/spear600/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2009
+# Vipin Kumar, ST Microelectronics <vipin.kumar@st.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#########################################################################
+
+TEXT_BASE = 0x00700000
+
+ALL += $(obj)u-boot.img
+
+# Environment variables in NAND
+ifeq ($(ENV),NAND)
+PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_NAND
+else
+PLATFORM_RELFLAGS += -DCONFIG_ENV_IS_IN_FLASH
+endif
+
+ifeq ($(CONSOLE),USB)
+PLATFORM_RELFLAGS += -DCONFIG_SPEAR_USBTTY
+endif
diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c
new file mode 100755
index 0000000..eef9a37
--- /dev/null
+++ b/board/spear/spear600/spear600.c
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_defs.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_nand.h>
+
+int board_init(void)
+{
+	return spear_board_init(MACH_TYPE_SPEAR600);
+}
+
+/*
+ * board_nand_init - Board specific NAND initialization
+ * @nand:	mtd private chip structure
+ *
+ * Called by nand_init_chip to initialize the board specific functions
+ */
+
+int board_nand_init(struct nand_chip *nand)
+{
+	struct misc_regs *const misc_regs_p =
+	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+	if (!(readl(&misc_regs_p->auto_cfg_reg) & MISC_NANDDIS))
+		return spear_nand_init(nand);
+
+	return -1;
+}
diff --git a/cpu/arm926ejs/kirkwood/Makefile b/cpu/arm926ejs/kirkwood/Makefile
index d73e2104..fc2cc03 100644
--- a/cpu/arm926ejs/kirkwood/Makefile
+++ b/cpu/arm926ejs/kirkwood/Makefile
@@ -26,8 +26,8 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS-y	= dram.o
-COBJS-y	+= cpu.o
+COBJS-y	= cpu.o
+COBJS-y	+= dram.o
 COBJS-y	+= mpp.o
 COBJS-y	+= timer.o
 
diff --git a/cpu/arm926ejs/spear/Makefile b/cpu/arm926ejs/spear/Makefile
new file mode 100755
index 0000000..bf8dfa8
--- /dev/null
+++ b/cpu/arm926ejs/spear/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).a
+
+COBJS	:= reset.o \
+	   timer.o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm926ejs/spear/reset.c b/cpu/arm926ejs/spear/reset.c
new file mode 100755
index 0000000..73ad86d
--- /dev/null
+++ b/cpu/arm926ejs/spear/reset.c
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_syscntl.h>
+
+void reset_cpu(ulong ignored)
+{
+	struct syscntl_regs *syscntl_regs_p =
+	    (struct syscntl_regs *)CONFIG_SPEAR_SYSCNTLBASE;
+
+	printf("System is going to reboot ...\n");
+
+	/*
+	 * This 1 second delay will allow the above message
+	 * to be printed before reset
+	 */
+	udelay((1000 * 1000));
+
+	/* Going into slow mode before resetting SOC */
+	writel(0x02, &syscntl_regs_p->scctrl);
+
+	/*
+	 * Writing any value to the system status register will
+	 * reset the SoC
+	 */
+	writel(0x00, &syscntl_regs_p->scsysstat);
+
+	/* system will restart */
+	while (1)
+		;
+}
diff --git a/cpu/arm926ejs/spear/timer.c b/cpu/arm926ejs/spear/timer.c
new file mode 100755
index 0000000..06858b4
--- /dev/null
+++ b/cpu/arm926ejs/spear/timer.c
@@ -0,0 +1,153 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_gpt.h>
+#include <asm/arch/spr_misc.h>
+
+#define GPT_RESOLUTION	(CONFIG_SPEAR_HZ_CLOCK / CONFIG_SPEAR_HZ)
+#define READ_TIMER()	(readl(&gpt_regs_p->count) & GPT_FREE_RUNNING)
+
+static struct gpt_regs *const gpt_regs_p =
+    (struct gpt_regs *)CONFIG_SPEAR_TIMERBASE;
+
+static struct misc_regs *const misc_regs_p =
+    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+static ulong timestamp;
+static ulong lastdec;
+
+int timer_init(void)
+{
+	u32 synth;
+
+	/* Prescaler setting */
+#if defined(CONFIG_SPEAR3XX)
+	writel(MISC_PRSC_CFG, &misc_regs_p->prsc2_clk_cfg);
+	synth = MISC_GPT4SYNTH;
+#elif defined(CONFIG_SPEAR600)
+	writel(MISC_PRSC_CFG, &misc_regs_p->prsc1_clk_cfg);
+	synth = MISC_GPT3SYNTH;
+#else
+# error Incorrect config. Can only be spear{600|300|310|320}
+#endif
+
+	writel(readl(&misc_regs_p->periph_clk_cfg) | synth,
+	       &misc_regs_p->periph_clk_cfg);
+
+	/* disable timers */
+	writel(GPT_PRESCALER_1 | GPT_MODE_AUTO_RELOAD, &gpt_regs_p->control);
+
+	/* load value for free running */
+	writel(GPT_FREE_RUNNING, &gpt_regs_p->compare);
+
+	/* auto reload, start timer */
+	writel(readl(&gpt_regs_p->control) | GPT_ENABLE, &gpt_regs_p->control);
+
+	reset_timer_masked();
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+ulong get_timer(ulong base)
+{
+	return (get_timer_masked() / GPT_RESOLUTION) - base;
+}
+
+void set_timer(ulong t)
+{
+	timestamp = t;
+}
+
+void __udelay(unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_timer_masked();
+	ulong tenudelcnt = CONFIG_SPEAR_HZ_CLOCK / (1000 * 100);
+	ulong rndoff;
+
+	rndoff = (usec % 10) ? 1 : 0;
+
+	/* tenudelcnt timer tick gives 10 microsecconds delay */
+	tmo = ((usec / 10) + rndoff) * tenudelcnt;
+
+	while ((ulong) (get_timer_masked() - start) < tmo)
+		;
+}
+
+void reset_timer_masked(void)
+{
+	/* reset time */
+	lastdec = READ_TIMER();
+	timestamp = 0;
+}
+
+ulong get_timer_masked(void)
+{
+	ulong now = READ_TIMER();
+
+	if (now >= lastdec) {
+		/* normal mode */
+		timestamp += now - lastdec;
+	} else {
+		/* we have an overflow ... */
+		timestamp += now + GPT_FREE_RUNNING - lastdec;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void udelay_masked(unsigned long usec)
+{
+	return udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SPEAR_HZ;
+}
diff --git a/doc/README.spear b/doc/README.spear
new file mode 100644
index 0000000..a8b1052
--- /dev/null
+++ b/doc/README.spear
@@ -0,0 +1,48 @@
+
+SPEAr (Structured Processor Enhanced Architecture).
+
+SPEAr600 is also known as SPEArPlus and SPEAr300 is also known as SPEArBasic
+
+The SPEAr SoC family embeds a customizable logic that can be programmed
+one-time by a customer at silicon mask level (i.e. not at runtime!).
+
+We are now adding the support in u-boot for two SoC: SPEAr600 and SPEAr3xx.
+
+All 4 SoCs share common peripherals.
+
+1. ARM926ejs core based (sp600 has two cores, the 2nd handled only in Linux)
+2. FastEthernet (sp600 has Gbit version, but same controller - GMAC)
+3. USB Host
+4. USB Device
+5. NAND controller (FSMC)
+6. Serial NOR ctrl
+7. I2C
+8. SPI
+9. CLCD
+10. others ..
+
+Everything is supported in Linux.
+u-boot is not currently supporting all peripeharls (just a few as listed below).
+1. USB Device
+2. NAND controller (FSMC)
+3. Serial Memory Interface
+4. EMI (Parallel NOR interface)
+4. I2C
+5. UART
+
+Build options
+	make spear600_config
+	make spear300_config
+	make spear310_config
+	make spear320_config
+
+Further options
+	make ENV=NAND (supported by all 4 SoCs)
+	- This option generates a uboot image that saves environment inn NAND
+
+	make CONSOLE=USB (supported by all 4 SoCs)
+	- This option generates a uboot image for using usbdevice as a tty i/f
+
+	make FLASH=PNOR (supported by SPEAr310 and SPEAr320)
+	- This option generates a uboot image that supports emi controller for
+	CFI compliant parallel NOR flash
diff --git a/drivers/gpio/kw_gpio.c b/drivers/gpio/kw_gpio.c
index 1c28834..56383c2 100644
--- a/drivers/gpio/kw_gpio.c
+++ b/drivers/gpio/kw_gpio.c
@@ -3,9 +3,23 @@
  *
  * Marvell Orion SoC GPIO handling.
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /*
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index b860e89..29bda85 100644..100755
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -37,6 +37,7 @@ COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
 COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
 COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
 COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
+COBJS-$(CONFIG_SPEAR_I2C) += spr_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/i2c/kirkwood_i2c.c b/drivers/i2c/kirkwood_i2c.c
index 37b7d99..a4409be 100644
--- a/drivers/i2c/kirkwood_i2c.c
+++ b/drivers/i2c/kirkwood_i2c.c
@@ -5,16 +5,29 @@
  *
  * Based on:
  * Author: Mark A. Greer <mgreer@mvista.com>
+ * 2005 (c) MontaVista, Software, Inc.
  *
- * 2005 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  *
  * ported from Linux to u-boot
  * (C) Copyright 2009
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
  */
 #include <common.h>
 #include <i2c.h>
diff --git a/drivers/i2c/spr_i2c.c b/drivers/i2c/spr_i2c.c
new file mode 100755
index 0000000..eabfe84
--- /dev/null
+++ b/drivers/i2c/spr_i2c.c
@@ -0,0 +1,331 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_i2c.h>
+
+static struct i2c_regs *const i2c_regs_p =
+    (struct i2c_regs *)CONFIG_SYS_I2C_BASE;
+
+/*
+ * set_speed - Set the i2c speed mode (standard, high, fast)
+ * @i2c_spd:	required i2c speed mode
+ *
+ * Set the i2c speed mode (standard, high, fast)
+ */
+static void set_speed(int i2c_spd)
+{
+	unsigned int cntl;
+	unsigned int hcnt, lcnt;
+	unsigned int high, low;
+
+	cntl = (readl(&i2c_regs_p->ic_con) & (~IC_CON_SPD_MSK));
+
+	switch (i2c_spd) {
+	case IC_SPEED_MODE_MAX:
+		cntl |= IC_CON_SPD_HS;
+		high = MIN_HS_SCL_HIGHTIME;
+		low = MIN_HS_SCL_LOWTIME;
+		break;
+
+	case IC_SPEED_MODE_STANDARD:
+		cntl |= IC_CON_SPD_SS;
+		high = MIN_SS_SCL_HIGHTIME;
+		low = MIN_SS_SCL_LOWTIME;
+		break;
+
+	case IC_SPEED_MODE_FAST:
+	default:
+		cntl |= IC_CON_SPD_FS;
+		high = MIN_FS_SCL_HIGHTIME;
+		low = MIN_FS_SCL_LOWTIME;
+		break;
+	}
+
+	writel(cntl, &i2c_regs_p->ic_con);
+
+	hcnt = (IC_CLK * high) / NANO_TO_MICRO;
+	writel(hcnt, &i2c_regs_p->ic_fs_scl_hcnt);
+
+	lcnt = (IC_CLK * low) / NANO_TO_MICRO;
+	writel(lcnt, &i2c_regs_p->ic_fs_scl_lcnt);
+}
+
+/*
+ * i2c_set_bus_speed - Set the i2c speed
+ * @speed:	required i2c speed
+ *
+ * Set the i2c speed.
+ */
+void i2c_set_bus_speed(int speed)
+{
+	if (speed >= I2C_MAX_SPEED)
+		set_speed(IC_SPEED_MODE_MAX);
+	else if (speed >= I2C_FAST_SPEED)
+		set_speed(IC_SPEED_MODE_FAST);
+	else
+		set_speed(IC_SPEED_MODE_STANDARD);
+}
+
+/*
+ * i2c_get_bus_speed - Gets the i2c speed
+ *
+ * Gets the i2c speed.
+ */
+int i2c_get_bus_speed(void)
+{
+	u32 cntl;
+
+	cntl = (readl(&i2c_regs_p->ic_con) & IC_CON_SPD_MSK);
+
+	if (cntl == IC_CON_SPD_HS)
+		return I2C_MAX_SPEED;
+	else if (cntl == IC_CON_SPD_FS)
+		return I2C_FAST_SPEED;
+	else if (cntl == IC_CON_SPD_SS)
+		return I2C_STANDARD_SPEED;
+
+	return 0;
+}
+
+/*
+ * i2c_init - Init function
+ * @speed:	required i2c speed
+ * @slaveadd:	slave address for the spear device
+ *
+ * Initialization function.
+ */
+void i2c_init(int speed, int slaveadd)
+{
+	unsigned int enbl;
+
+	/* Disable i2c */
+	enbl = readl(&i2c_regs_p->ic_enable);
+	enbl &= ~IC_ENABLE_0B;
+	writel(enbl, &i2c_regs_p->ic_enable);
+
+	writel((IC_CON_SD | IC_CON_SPD_FS | IC_CON_MM), &i2c_regs_p->ic_con);
+	writel(IC_RX_TL, &i2c_regs_p->ic_rx_tl);
+	writel(IC_TX_TL, &i2c_regs_p->ic_tx_tl);
+	i2c_set_bus_speed(speed);
+	writel(IC_STOP_DET, &i2c_regs_p->ic_intr_mask);
+	writel(slaveadd, &i2c_regs_p->ic_sar);
+
+	/* Enable i2c */
+	enbl = readl(&i2c_regs_p->ic_enable);
+	enbl |= IC_ENABLE_0B;
+	writel(enbl, &i2c_regs_p->ic_enable);
+}
+
+/*
+ * i2c_setaddress - Sets the target slave address
+ * @i2c_addr:	target i2c address
+ *
+ * Sets the target slave address.
+ */
+static void i2c_setaddress(unsigned int i2c_addr)
+{
+	writel(i2c_addr, &i2c_regs_p->ic_tar);
+}
+
+/*
+ * i2c_flush_rxfifo - Flushes the i2c RX FIFO
+ *
+ * Flushes the i2c RX FIFO
+ */
+static void i2c_flush_rxfifo(void)
+{
+	while (readl(&i2c_regs_p->ic_status) & IC_STATUS_RFNE)
+		readl(&i2c_regs_p->ic_cmd_data);
+}
+
+/*
+ * i2c_wait_for_bb - Waits for bus busy
+ *
+ * Waits for bus busy
+ */
+static int i2c_wait_for_bb(void)
+{
+	unsigned long start_time_bb = get_timer(0);
+
+	while ((readl(&i2c_regs_p->ic_status) & IC_STATUS_MA) ||
+	       !(readl(&i2c_regs_p->ic_status) & IC_STATUS_TFE)) {
+
+		/* Evaluate timeout */
+		if (get_timer(start_time_bb) > (unsigned long)(I2C_BYTE_TO_BB))
+			return 1;
+	}
+
+	return 0;
+}
+
+/* check parameters for i2c_read and i2c_write */
+static int check_params(uint addr, int alen, uchar *buffer, int len)
+{
+	if (buffer == NULL) {
+		printf("Buffer is invalid\n");
+		return 1;
+	}
+
+	if (alen > 1) {
+		printf("addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (addr + len > 256) {
+		printf("address out of range\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+static int i2c_xfer_init(uchar chip, uint addr)
+{
+	if (i2c_wait_for_bb()) {
+		printf("Timed out waiting for bus\n");
+		return 1;
+	}
+
+	i2c_setaddress(chip);
+	writel(addr, &i2c_regs_p->ic_cmd_data);
+
+	return 0;
+}
+
+static int i2c_xfer_finish(void)
+{
+	ulong start_stop_det = get_timer(0);
+
+	while (1) {
+		if ((readl(&i2c_regs_p->ic_raw_intr_stat) & IC_STOP_DET)) {
+			readl(&i2c_regs_p->ic_clr_stop_det);
+			break;
+		} else if (get_timer(start_stop_det) > I2C_STOPDET_TO) {
+			break;
+		}
+	}
+
+	if (i2c_wait_for_bb()) {
+		printf("Timed out waiting for bus\n");
+		return 1;
+	}
+
+	i2c_flush_rxfifo();
+
+	/* Wait for read/write operation to complete on actual memory */
+	udelay(10000);
+
+	return 0;
+}
+
+/*
+ * i2c_read - Read from i2c memory
+ * @chip:	target i2c address
+ * @addr:	address to read from
+ * @alen:
+ * @buffer:	buffer for read data
+ * @len:	no of bytes to be read
+ *
+ * Read from i2c memory.
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	unsigned long start_time_rx;
+
+	if (check_params(addr, alen, buffer, len))
+		return 1;
+
+	if (i2c_xfer_init(chip, addr))
+		return 1;
+
+	start_time_rx = get_timer(0);
+	while (len) {
+		writel(IC_CMD, &i2c_regs_p->ic_cmd_data);
+
+		if (readl(&i2c_regs_p->ic_status) & IC_STATUS_RFNE) {
+			*buffer++ = (uchar)readl(&i2c_regs_p->ic_cmd_data);
+			len--;
+			start_time_rx = get_timer(0);
+
+		} else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
+				printf("Timed out. i2c read Failed\n");
+				return 1;
+		}
+	}
+
+	return i2c_xfer_finish();
+}
+
+/*
+ * i2c_write - Write to i2c memory
+ * @chip:	target i2c address
+ * @addr:	address to read from
+ * @alen:
+ * @buffer:	buffer for read data
+ * @len:	no of bytes to be read
+ *
+ * Write to i2c memory.
+ */
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int nb = len;
+	unsigned long start_time_tx;
+
+	if (check_params(addr, alen, buffer, len))
+		return 1;
+
+	if (i2c_xfer_init(chip, addr))
+		return 1;
+
+	start_time_tx = get_timer(0);
+	while (len) {
+		if (readl(&i2c_regs_p->ic_status) & IC_STATUS_TFNF) {
+			writel(*buffer, &i2c_regs_p->ic_cmd_data);
+			buffer++;
+			len--;
+			start_time_tx = get_timer(0);
+
+		} else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
+				printf("Timed out. i2c write Failed\n");
+				return 1;
+		}
+	}
+
+	return i2c_xfer_finish();
+}
+
+/*
+ * i2c_probe - Probe the i2c chip
+ */
+int i2c_probe(uchar chip)
+{
+	u32 tmp;
+
+	/*
+	 * Try to read the first location of the chip.
+	 */
+	return i2c_read(chip, 0, 1, (uchar *)&tmp, 1);
+}
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 754d648..cbf6f15 100644..100755
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -34,6 +34,7 @@ COBJS-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o
 COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
 COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
 COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o
+COBJS-$(CONFIG_SPEARSMI) += spr_smi.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 02449ee..28f27da 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -47,6 +47,7 @@ COBJS-$(CONFIG_NAND_NDFC) += ndfc.o
 COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
 COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
 COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o
+COBJS-$(CONFIG_NAND_SPEAR) += spr_nand.o
 COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
 COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o
 endif
diff --git a/drivers/mtd/nand/spr_nand.c b/drivers/mtd/nand/spr_nand.c
new file mode 100755
index 0000000..097d0c6
--- /dev/null
+++ b/drivers/mtd/nand/spr_nand.c
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_nand.h>
+
+static struct fsmc_regs *const fsmc_regs_p =
+    (struct fsmc_regs *)CONFIG_SPEAR_FSMCBASE;
+
+static struct nand_ecclayout spear_nand_ecclayout = {
+	.eccbytes = 24,
+	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
+		   66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
+	.oobfree = {
+		    {.offset = 8, .length = 8},
+		    {.offset = 24, .length = 8},
+		    {.offset = 40, .length = 8},
+		    {.offset = 56, .length = 8},
+		    {.offset = 72, .length = 8},
+		    {.offset = 88, .length = 8},
+		    {.offset = 104, .length = 8},
+		    {.offset = 120, .length = 8}
+		    }
+};
+
+static void spear_nand_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		IO_ADDR_W = (ulong)this->IO_ADDR_W;
+
+		IO_ADDR_W &= ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE);
+		if (ctrl & NAND_CLE)
+			IO_ADDR_W |= CONFIG_SYS_NAND_CLE;
+		if (ctrl & NAND_ALE)
+			IO_ADDR_W |= CONFIG_SYS_NAND_ALE;
+
+		if (ctrl & NAND_NCE) {
+			writel(readl(&fsmc_regs_p->genmemctrl_pc) |
+			       FSMC_ENABLE, &fsmc_regs_p->genmemctrl_pc);
+		} else {
+			writel(readl(&fsmc_regs_p->genmemctrl_pc) &
+			       ~FSMC_ENABLE, &fsmc_regs_p->genmemctrl_pc);
+		}
+		this->IO_ADDR_W = (void *)IO_ADDR_W;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static int spear_read_hwecc(struct mtd_info *mtd,
+			    const u_char *data, u_char ecc[3])
+{
+	u_int ecc_tmp;
+
+	/* read the h/w ECC */
+	ecc_tmp = readl(&fsmc_regs_p->genmemctrl_ecc);
+
+	ecc[0] = (u_char) (ecc_tmp & 0xFF);
+	ecc[1] = (u_char) ((ecc_tmp & 0xFF00) >> 8);
+	ecc[2] = (u_char) ((ecc_tmp & 0xFF0000) >> 16);
+
+	return 0;
+}
+
+void spear_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	writel(readl(&fsmc_regs_p->genmemctrl_pc) & ~0x80,
+	       &fsmc_regs_p->genmemctrl_pc);
+	writel(readl(&fsmc_regs_p->genmemctrl_pc) & ~FSMC_ECCEN,
+	       &fsmc_regs_p->genmemctrl_pc);
+	writel(readl(&fsmc_regs_p->genmemctrl_pc) | FSMC_ECCEN,
+	       &fsmc_regs_p->genmemctrl_pc);
+}
+
+int spear_nand_init(struct nand_chip *nand)
+{
+	writel(FSMC_DEVWID_8 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON,
+	       &fsmc_regs_p->genmemctrl_pc);
+	writel(readl(&fsmc_regs_p->genmemctrl_pc) | FSMC_TCLR_1 | FSMC_TAR_1,
+	       &fsmc_regs_p->genmemctrl_pc);
+	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
+	       &fsmc_regs_p->genmemctrl_comm);
+	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
+	       &fsmc_regs_p->genmemctrl_attrib);
+
+	nand->options = 0;
+	nand->ecc.mode = NAND_ECC_HW;
+	nand->ecc.layout = &spear_nand_ecclayout;
+	nand->ecc.size = 512;
+	nand->ecc.bytes = 3;
+	nand->ecc.calculate = spear_read_hwecc;
+	nand->ecc.hwctl = spear_enable_hwecc;
+	nand->ecc.correct = nand_correct_data;
+	nand->cmd_ctrl = spear_nand_hwcontrol;
+	return 0;
+}
diff --git a/drivers/mtd/spr_smi.c b/drivers/mtd/spr_smi.c
new file mode 100755
index 0000000..9a70a19
--- /dev/null
+++ b/drivers/mtd/spr_smi.c
@@ -0,0 +1,523 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <flash.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_smi.h>
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+
+static struct smi_regs *const smicntl =
+    (struct smi_regs * const)CONFIG_SYS_SMI_BASE;
+static ulong bank_base[CONFIG_SYS_MAX_FLASH_BANKS] =
+    CONFIG_SYS_FLASH_ADDR_BASE;
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+#define ST_M25Pxx_ID		0x00002020
+
+static struct flash_dev flash_ids[] = {
+	{0x10, 0x10000, 2},	/* 64K Byte */
+	{0x11, 0x20000, 4},	/* 128K Byte */
+	{0x12, 0x40000, 4},	/* 256K Byte */
+	{0x13, 0x80000, 8},	/* 512K Byte */
+	{0x14, 0x100000, 16},	/* 1M Byte */
+	{0x15, 0x200000, 32},	/* 2M Byte */
+	{0x16, 0x400000, 64},	/* 4M Byte */
+	{0x17, 0x800000, 128},	/* 8M Byte */
+	{0x18, 0x1000000, 64},	/* 16M Byte */
+	{0x00,}
+};
+
+/*
+ * smi_wait_xfer_finish - Wait until TFF is set in status register
+ * @timeout:	 timeout in milliseconds
+ *
+ * Wait until TFF is set in status register
+ */
+static void smi_wait_xfer_finish(int timeout)
+{
+	while (timeout--) {
+		if (readl(&smicntl->smi_sr) & TFF)
+			break;
+		udelay(1000);
+	}
+}
+
+/*
+ * smi_read_id - Read flash id
+ * @info:	 flash_info structure pointer
+ * @banknum:	 bank number
+ *
+ * Read the flash id present at bank #banknum
+ */
+static unsigned int smi_read_id(flash_info_t *info, int banknum)
+{
+	unsigned int value;
+
+	writel(readl(&smicntl->smi_cr1) | SW_MODE, &smicntl->smi_cr1);
+	writel(READ_ID, &smicntl->smi_tr);
+	writel((banknum << BANKSEL_SHIFT) | SEND | TX_LEN_1 | RX_LEN_3,
+	       &smicntl->smi_cr2);
+	smi_wait_xfer_finish(XFER_FINISH_TOUT);
+
+	value = (readl(&smicntl->smi_rr) & 0x00FFFFFF);
+
+	writel(readl(&smicntl->smi_sr) & ~TFF, &smicntl->smi_sr);
+	writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1);
+
+	return value;
+}
+
+/*
+ * flash_get_size - Detect the SMI flash by reading the ID.
+ * @base:	 Base address of the flash area bank #banknum
+ * @banknum:	 Bank number
+ *
+ * Detect the SMI flash by reading the ID. Initializes the flash_info structure
+ * with size, sector count etc.
+ */
+static ulong flash_get_size(ulong base, int banknum)
+{
+	flash_info_t *info = &flash_info[banknum];
+	struct flash_dev *dev;
+	unsigned int value;
+	unsigned int density;
+	int i;
+
+	value = smi_read_id(info, banknum);
+	density = (value >> 16) & 0xff;
+
+	for (i = 0, dev = &flash_ids[0]; dev->density != 0x0;
+	     i++, dev = &flash_ids[i]) {
+		if (dev->density == density) {
+			info->size = dev->size;
+			info->sector_count = dev->sector_count;
+			break;
+		}
+	}
+
+	if (dev->density == 0x0)
+		return 0;
+
+	info->flash_id = value & 0xffff;
+	info->start[0] = base;
+
+	return info->size;
+}
+
+/*
+ * smi_read_sr - Read status register of SMI
+ * @bank:	 bank number
+ *
+ * This routine will get the status register of the flash chip present at the
+ * given bank
+ */
+static unsigned int smi_read_sr(int bank)
+{
+	u32 ctrlreg1;
+
+	/* store the CTRL REG1 state */
+	ctrlreg1 = readl(&smicntl->smi_cr1);
+
+	/* Program SMI in HW Mode */
+	writel(readl(&smicntl->smi_cr1) & ~(SW_MODE | WB_MODE),
+	       &smicntl->smi_cr1);
+
+	/* Performing a RSR instruction in HW mode */
+	writel((bank << BANKSEL_SHIFT) | RD_STATUS_REG, &smicntl->smi_cr2);
+
+	smi_wait_xfer_finish(XFER_FINISH_TOUT);
+
+	/* Restore the CTRL REG1 state */
+	writel(ctrlreg1, &smicntl->smi_cr1);
+
+	return readl(&smicntl->smi_sr);
+}
+
+/*
+ * smi_wait_till_ready - Wait till last operation is over.
+ * @bank:	 bank number shifted.
+ * @timeout:	 timeout in milliseconds.
+ *
+ * This routine checks for WIP(write in progress)bit in Status register(SMSR-b0)
+ * The routine checks for #timeout loops, each at interval of 1 milli-second.
+ * If successful the routine returns 0.
+ */
+static int smi_wait_till_ready(int bank, int timeout)
+{
+	int count;
+	unsigned int sr;
+
+	/* One chip guarantees max 5 msec wait here after page writes,
+	   but potentially three seconds (!) after page erase. */
+	for (count = 0; count < timeout; count++) {
+
+		sr = smi_read_sr(bank);
+		if (sr < 0)
+			break;
+		else if (!(sr & WIP_BIT))
+			return 0;
+
+		/* Try again after 1m-sec */
+		udelay(1000);
+	}
+	printf("SMI controller is still in wait, timeout=%d\n", timeout);
+	return -EIO;
+}
+
+/*
+ * smi_write_enable - Enable the flash to do write operation
+ * @bank:	 bank number
+ *
+ * Set write enable latch with Write Enable command.
+ * Returns negative if error occurred.
+ */
+static int smi_write_enable(int bank)
+{
+	u32 ctrlreg1;
+	int timeout = WMODE_TOUT;
+
+	/* Store the CTRL REG1 state */
+	ctrlreg1 = readl(&smicntl->smi_cr1);
+
+	/* Program SMI in H/W Mode */
+	writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1);
+
+	/* Give the Flash, Write Enable command */
+	writel((bank << BANKSEL_SHIFT) | WE, &smicntl->smi_cr2);
+
+	smi_wait_xfer_finish(XFER_FINISH_TOUT);
+
+	/* Restore the CTRL REG1 state */
+	writel(ctrlreg1, &smicntl->smi_cr1);
+
+	while (timeout--) {
+		if (smi_read_sr(bank) & (1 << (bank + WM_SHIFT)))
+			break;
+		udelay(1000);
+	}
+
+	if (timeout)
+		return 0;
+
+	return -1;
+}
+
+/*
+ * smi_init - SMI initialization routine
+ *
+ * SMI initialization routine. Sets SMI control register1.
+ */
+static void smi_init(void)
+{
+	/* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */
+	writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4,
+	       &smicntl->smi_cr1);
+}
+
+/*
+ * smi_sector_erase - Erase flash sector
+ * @info:	 flash_info structure pointer
+ * @sector:	 sector number
+ *
+ * Set write enable latch with Write Enable command.
+ * Returns negative if error occurred.
+ */
+static int smi_sector_erase(flash_info_t *info, unsigned int sector)
+{
+	int bank;
+	unsigned int sect_add;
+	unsigned int instruction;
+
+	switch (info->start[0]) {
+	case SMIBANK0_BASE:
+		bank = BANK0;
+		break;
+	case SMIBANK1_BASE:
+		bank = BANK1;
+		break;
+	case SMIBANK2_BASE:
+		bank = BANK2;
+		break;
+	case SMIBANK3_BASE:
+		bank = BANK3;
+		break;
+	default:
+		return -1;
+	}
+
+	sect_add = sector * (info->size / info->sector_count);
+	instruction = ((sect_add >> 8) & 0x0000FF00) | SECTOR_ERASE;
+
+	writel(readl(&smicntl->smi_sr) & ~(ERF1 | ERF2), &smicntl->smi_sr);
+
+	if (info->flash_id == ST_M25Pxx_ID) {
+		/* Wait until finished previous write command. */
+		if (smi_wait_till_ready(bank, CONFIG_SYS_FLASH_ERASE_TOUT))
+			return -EBUSY;
+
+		/* Send write enable, before erase commands. */
+		if (smi_write_enable(bank))
+			return -EIO;
+
+		/* Put SMI in SW mode */
+		writel(readl(&smicntl->smi_cr1) | SW_MODE, &smicntl->smi_cr1);
+
+		/* Send Sector Erase command in SW Mode */
+		writel(instruction, &smicntl->smi_tr);
+		writel((bank << BANKSEL_SHIFT) | SEND | TX_LEN_4,
+		       &smicntl->smi_cr2);
+		smi_wait_xfer_finish(XFER_FINISH_TOUT);
+
+		if (smi_wait_till_ready(bank, CONFIG_SYS_FLASH_ERASE_TOUT))
+			return -EBUSY;
+
+		/* Put SMI in HW mode */
+		writel(readl(&smicntl->smi_cr1) & ~SW_MODE,
+		       &smicntl->smi_cr1);
+
+		return 0;
+	} else {
+		/* Put SMI in HW mode */
+		writel(readl(&smicntl->smi_cr1) & ~SW_MODE,
+		       &smicntl->smi_cr1);
+		return -EINVAL;
+	}
+}
+
+/*
+ * smi_write - Write to SMI flash
+ * @src_addr:	 source buffer
+ * @dst_addr:	 destination buffer
+ * @length:	 length to write in words
+ * @bank:	 bank base address
+ *
+ * Write to SMI flash
+ */
+static int smi_write(unsigned int *src_addr, unsigned int *dst_addr,
+		     unsigned int length, ulong bank_addr)
+{
+	int banknum;
+	unsigned int WM;
+
+	switch (bank_addr) {
+	case SMIBANK0_BASE:
+		banknum = BANK0;
+		WM = WM0;
+		break;
+	case SMIBANK1_BASE:
+		banknum = BANK1;
+		WM = WM1;
+		break;
+	case SMIBANK2_BASE:
+		banknum = BANK2;
+		WM = WM2;
+		break;
+	case SMIBANK3_BASE:
+		banknum = BANK3;
+		WM = WM3;
+		break;
+	default:
+		return -1;
+	}
+
+	if (smi_wait_till_ready(banknum, CONFIG_SYS_FLASH_WRITE_TOUT))
+		return -EBUSY;
+
+	/* Set SMI in Hardware Mode */
+	writel(readl(&smicntl->smi_cr1) & ~SW_MODE, &smicntl->smi_cr1);
+
+	if (smi_write_enable(banknum))
+		return -EIO;
+
+	/* Perform the write command */
+	while (length--) {
+		if (((ulong) (dst_addr) % SFLASH_PAGE_SIZE) == 0) {
+			if (smi_wait_till_ready(banknum,
+						CONFIG_SYS_FLASH_WRITE_TOUT))
+				return -EBUSY;
+
+			if (smi_write_enable(banknum))
+				return -EIO;
+		}
+
+		*dst_addr++ = *src_addr++;
+
+		if ((readl(&smicntl->smi_sr) & (ERF1 | ERF2)))
+			return -EIO;
+	}
+
+	if (smi_wait_till_ready(banknum, CONFIG_SYS_FLASH_WRITE_TOUT))
+		return -EBUSY;
+
+	writel(readl(&smicntl->smi_sr) & ~(WCF), &smicntl->smi_sr);
+
+	return 0;
+}
+
+/*
+ * write_buff - Write to SMI flash
+ * @info:	 flash info structure
+ * @src:	 source buffer
+ * @dest_addr:	 destination buffer
+ * @length:	 length to write in words
+ *
+ * Write to SMI flash
+ */
+int write_buff(flash_info_t *info, uchar *src, ulong dest_addr, ulong length)
+{
+	return smi_write((unsigned int *)src, (unsigned int *)dest_addr,
+		  (length + 3) / 4, info->start[0]);
+}
+
+/*
+ * flash_init - SMI flash initialization
+ *
+ * SMI flash initialization
+ */
+unsigned long flash_init(void)
+{
+	unsigned long size = 0;
+	int i, j;
+
+	smi_init();
+
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		size += flash_info[i].size = flash_get_size(bank_base[i], i);
+	}
+
+	for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) {
+		for (i = 1; i < flash_info[j].sector_count; i++)
+			flash_info[j].start[i] =
+			    flash_info[j].start[i - 1] +
+			    flash_info->size / flash_info->sector_count;
+
+	}
+
+	return size;
+}
+
+/*
+ * flash_print_info - Print SMI flash information
+ *
+ * Print SMI flash information
+ */
+void flash_print_info(flash_info_t *info)
+{
+	int i;
+	if (info->flash_id == FLASH_UNKNOWN) {
+		puts("missing or unknown FLASH type\n");
+		return;
+	}
+	printf("  Size: %ld MB in %d Sectors\n",
+	       info->size >> 20, info->sector_count);
+
+	puts("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
+		int size;
+		int erased;
+		u32 *flash;
+
+		/*
+		 * Check if whole sector is erased
+		 */
+		size = (info->size) / (info->sector_count);
+		flash = (u32 *) info->start[i];
+		size = size / sizeof(int);
+
+		while ((size--) && (*flash++ == ~0))
+			;
+
+		size++;
+		if (size)
+			erased = 0;
+		else
+			erased = 1;
+
+		if ((i % 5) == 0)
+			printf("\n");
+
+		printf(" %08lX%s%s",
+		       info->start[i],
+		       erased ? " E" : "  ", info->protect[i] ? "RO " : "   ");
+#else
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s",
+		       info->start[i], info->protect[i] ? " (RO)  " : "     ");
+#endif
+	}
+	putc('\n');
+	return;
+}
+
+/*
+ * flash_erase - Erase SMI flash
+ *
+ * Erase SMI flash
+ */
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	int rcode = 0;
+	int prot = 0;
+	flash_sect_t sect;
+
+	if (info->flash_id != ST_M25Pxx_ID) {
+		puts("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		puts("- no sectors to erase\n");
+		return 1;
+	}
+
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect])
+			prot++;
+	}
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		putc('\n');
+	}
+
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {
+			if (smi_sector_erase(info, sect))
+				rcode = 1;
+			else
+				putc('.');
+		}
+	}
+	puts(" done\n");
+	return rcode;
+}
+#endif
diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h
index 6b6c4a1..a23169a 100644..100755
--- a/drivers/serial/usbtty.h
+++ b/drivers/serial/usbtty.h
@@ -33,6 +33,8 @@
 #include <usb/musb_udc.h>
 #elif defined(CONFIG_PXA27X)
 #include <usb/pxa27x_udc.h>
+#elif defined(CONFIG_SPEAR3XX) || defined(CONFIG_SPEAR600)
+#include <usb/spr_udc.h>
 #endif
 
 #include <version_autogenerated.h>
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 2a19b1e..1d7362d 100644..100755
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -32,6 +32,7 @@ COBJS-$(CONFIG_OMAP1510) += omap1510_udc.o
 COBJS-$(CONFIG_OMAP1610) += omap1510_udc.o
 COBJS-$(CONFIG_MPC885_FAMILY) += mpc8xx_udc.o
 COBJS-$(CONFIG_PXA27X) += pxa27x_udc.o
+COBJS-$(CONFIG_SPEARUDC) += spr_udc.o
 endif
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/usb/gadget/spr_udc.c b/drivers/usb/gadget/spr_udc.c
new file mode 100755
index 0000000..f2b06d6
--- /dev/null
+++ b/drivers/usb/gadget/spr_udc.c
@@ -0,0 +1,998 @@
+/*
+ * Based on drivers/usb/gadget/omap1510_udc.c
+ * TI OMAP1510 USB bus interface driver
+ *
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include <usbdevice.h>
+#include "ep0.h"
+#include <usb/spr_udc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_misc.h>
+
+#define UDC_INIT_MDELAY		80	/* Device settle delay */
+
+/* Some kind of debugging output... */
+#ifndef DEBUG_SPRUSBTTY
+#define UDCDBG(str)
+#define UDCDBGA(fmt, args...)
+#else
+#define UDCDBG(str) serial_printf(str "\n")
+#define UDCDBGA(fmt, args...) serial_printf(fmt "\n", ##args)
+#endif
+
+static struct urb *ep0_urb;
+static struct usb_device_instance *udc_device;
+
+static struct plug_regs *const plug_regs_p =
+    (struct plug_regs * const)CONFIG_SYS_PLUG_BASE;
+static struct udc_regs *const udc_regs_p =
+    (struct udc_regs * const)CONFIG_SYS_USBD_BASE;
+static struct udc_endp_regs *const outep_regs_p =
+    &((struct udc_regs * const)CONFIG_SYS_USBD_BASE)->out_regs[0];
+static struct udc_endp_regs *const inep_regs_p =
+    &((struct udc_regs * const)CONFIG_SYS_USBD_BASE)->in_regs[0];
+
+/*
+ * udc_state_transition - Write the next packet to TxFIFO.
+ * @initial:	Initial state.
+ * @final:	Final state.
+ *
+ * Helper function to implement device state changes. The device states and
+ * the events that transition between them are:
+ *
+ *				STATE_ATTACHED
+ *				||	/\
+ *				\/	||
+ *	DEVICE_HUB_CONFIGURED			DEVICE_HUB_RESET
+ *				||	/\
+ *				\/	||
+ *				STATE_POWERED
+ *				||	/\
+ *				\/	||
+ *	DEVICE_RESET				DEVICE_POWER_INTERRUPTION
+ *				||	/\
+ *				\/	||
+ *				STATE_DEFAULT
+ *				||	/\
+ *				\/	||
+ *	DEVICE_ADDRESS_ASSIGNED			DEVICE_RESET
+ *				||	/\
+ *				\/	||
+ *				STATE_ADDRESSED
+ *				||	/\
+ *				\/	||
+ *	DEVICE_CONFIGURED			DEVICE_DE_CONFIGURED
+ *				||	/\
+ *				\/	||
+ *				STATE_CONFIGURED
+ *
+ * udc_state_transition transitions up (in the direction from STATE_ATTACHED
+ * to STATE_CONFIGURED) from the specified initial state to the specified final
+ * state, passing through each intermediate state on the way. If the initial
+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
+ * no state transitions will take place.
+ *
+ * udc_state_transition also transitions down (in the direction from
+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
+ * specified final state, passing through each intermediate state on the way.
+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
+ * state, then no state transitions will take place.
+ *
+ * This function must only be called with interrupts disabled.
+ */
+static void udc_state_transition(usb_device_state_t initial,
+				 usb_device_state_t final)
+{
+	if (initial < final) {
+		switch (initial) {
+		case STATE_ATTACHED:
+			usbd_device_event_irq(udc_device,
+					      DEVICE_HUB_CONFIGURED, 0);
+			if (final == STATE_POWERED)
+				break;
+		case STATE_POWERED:
+			usbd_device_event_irq(udc_device, DEVICE_RESET, 0);
+			if (final == STATE_DEFAULT)
+				break;
+		case STATE_DEFAULT:
+			usbd_device_event_irq(udc_device,
+					      DEVICE_ADDRESS_ASSIGNED, 0);
+			if (final == STATE_ADDRESSED)
+				break;
+		case STATE_ADDRESSED:
+			usbd_device_event_irq(udc_device, DEVICE_CONFIGURED, 0);
+		case STATE_CONFIGURED:
+			break;
+		default:
+			break;
+		}
+	} else if (initial > final) {
+		switch (initial) {
+		case STATE_CONFIGURED:
+			usbd_device_event_irq(udc_device,
+					      DEVICE_DE_CONFIGURED, 0);
+			if (final == STATE_ADDRESSED)
+				break;
+		case STATE_ADDRESSED:
+			usbd_device_event_irq(udc_device, DEVICE_RESET, 0);
+			if (final == STATE_DEFAULT)
+				break;
+		case STATE_DEFAULT:
+			usbd_device_event_irq(udc_device,
+					      DEVICE_POWER_INTERRUPTION, 0);
+			if (final == STATE_POWERED)
+				break;
+		case STATE_POWERED:
+			usbd_device_event_irq(udc_device, DEVICE_HUB_RESET, 0);
+		case STATE_ATTACHED:
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+/* Stall endpoint */
+static void udc_stall_ep(u32 ep_num)
+{
+	writel(readl(&inep_regs_p[ep_num].endp_cntl) | ENDP_CNTL_STALL,
+	       &inep_regs_p[ep_num].endp_cntl);
+
+	writel(readl(&outep_regs_p[ep_num].endp_cntl) | ENDP_CNTL_STALL,
+	       &outep_regs_p[ep_num].endp_cntl);
+}
+
+static void *get_fifo(int ep_num, int in)
+{
+	u32 *fifo_ptr = (u32 *)CONFIG_SYS_FIFO_BASE;
+
+	switch (ep_num) {
+	case UDC_EP3:
+		fifo_ptr += readl(&inep_regs_p[1].endp_bsorfn);
+		/* break intentionally left out */
+
+	case UDC_EP1:
+		fifo_ptr += readl(&inep_regs_p[0].endp_bsorfn);
+		/* break intentionally left out */
+
+	case UDC_EP0:
+	default:
+		if (in) {
+			fifo_ptr +=
+			    readl(&outep_regs_p[2].endp_maxpacksize) >> 16;
+			/* break intentionally left out */
+		} else {
+			break;
+		}
+
+	case UDC_EP2:
+		fifo_ptr += readl(&outep_regs_p[0].endp_maxpacksize) >> 16;
+		/* break intentionally left out */
+	}
+
+	return (void *)fifo_ptr;
+}
+
+static int usbgetpckfromfifo(int epNum, u8 *bufp, u32 len)
+{
+	u8 *fifo_ptr = (u8 *)get_fifo(epNum, 0);
+	u32 i, nw, nb;
+	u32 *wrdp;
+	u8 *bytp;
+
+	if (readl(&udc_regs_p->dev_stat) & DEV_STAT_RXFIFO_EMPTY)
+		return -1;
+
+	nw = len / sizeof(u32);
+	nb = len % sizeof(u32);
+
+	wrdp = (u32 *)bufp;
+	for (i = 0; i < nw; i++) {
+		writel(readl(fifo_ptr), wrdp);
+		wrdp++;
+	}
+
+	bytp = (u8 *)wrdp;
+	for (i = 0; i < nb; i++) {
+		writeb(readb(fifo_ptr), bytp);
+		fifo_ptr++;
+		bytp++;
+	}
+	readl(&outep_regs_p[epNum].write_done);
+
+	return 0;
+}
+
+static void usbputpcktofifo(int epNum, u8 *bufp, u32 len)
+{
+	u32 i, nw, nb;
+	u32 *wrdp;
+	u8 *bytp;
+	u8 *fifo_ptr = get_fifo(epNum, 1);
+
+	nw = len / sizeof(int);
+	nb = len % sizeof(int);
+	wrdp = (u32 *)bufp;
+	for (i = 0; i < nw; i++) {
+		writel(*wrdp, fifo_ptr);
+		wrdp++;
+	}
+
+	bytp = (u8 *)wrdp;
+	for (i = 0; i < nb; i++) {
+		writeb(*bytp, fifo_ptr);
+		fifo_ptr++;
+		bytp++;
+	}
+}
+
+/*
+ * spear_write_noniso_tx_fifo - Write the next packet to TxFIFO.
+ * @endpoint:		Endpoint pointer.
+ *
+ * If the endpoint has an active tx_urb, then the next packet of data from the
+ * URB is written to the tx FIFO.  The total amount of data in the urb is given
+ * by urb->actual_length.  The maximum amount of data that can be sent in any
+ * one packet is given by endpoint->tx_packetSize.  The number of data bytes
+ * from this URB that have already been transmitted is given by endpoint->sent.
+ * endpoint->last is updated by this routine with the number of data bytes
+ * transmitted in this packet.
+ *
+ */
+static void spear_write_noniso_tx_fifo(struct usb_endpoint_instance
+				       *endpoint)
+{
+	struct urb *urb = endpoint->tx_urb;
+	int align;
+
+	if (urb) {
+		u32 last;
+
+		UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d",
+			urb->buffer, urb->buffer_length, urb->actual_length);
+
+		last = MIN(urb->actual_length - endpoint->sent,
+			   endpoint->tx_packetSize);
+
+		if (last) {
+			u8 *cp = urb->buffer + endpoint->sent;
+
+			/*
+			 * This ensures that USBD packet fifo is accessed
+			 * - through word aligned pointer or
+			 * - through non word aligned pointer but only
+			 *   with a max length to make the next packet
+			 *   word aligned
+			 */
+
+			align = ((ulong)cp % sizeof(int));
+			if (align)
+				last = MIN(last, sizeof(int) - align);
+
+			UDCDBGA("endpoint->sent %d, tx_packetSize %d, last %d",
+				endpoint->sent, endpoint->tx_packetSize, last);
+
+			usbputpcktofifo(endpoint->endpoint_address &
+					USB_ENDPOINT_NUMBER_MASK, cp, last);
+		}
+		endpoint->last = last;
+	}
+}
+
+/*
+ * Handle SETUP USB interrupt.
+ * This function implements TRM Figure 14-14.
+ */
+static void spear_udc_setup(struct usb_endpoint_instance *endpoint)
+{
+	u8 *datap = (u8 *)&ep0_urb->device_request;
+	int ep_addr = endpoint->endpoint_address;
+
+	UDCDBG("-> Entering device setup");
+	usbgetpckfromfifo(ep_addr, datap, 8);
+
+	/* Try to process setup packet */
+	if (ep0_recv_setup(ep0_urb)) {
+		/* Not a setup packet, stall next EP0 transaction */
+		udc_stall_ep(0);
+		UDCDBG("can't parse setup packet, still waiting for setup");
+		return;
+	}
+
+	/* Check direction */
+	if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
+	    == USB_REQ_HOST2DEVICE) {
+		UDCDBG("control write on EP0");
+		if (le16_to_cpu(ep0_urb->device_request.wLength)) {
+			/* Stall this request */
+			UDCDBG("Stalling unsupported EP0 control write data "
+			       "stage.");
+			udc_stall_ep(0);
+		}
+	} else {
+
+		UDCDBG("control read on EP0");
+		/*
+		 * The ep0_recv_setup function has already placed our response
+		 * packet data in ep0_urb->buffer and the packet length in
+		 * ep0_urb->actual_length.
+		 */
+		endpoint->tx_urb = ep0_urb;
+		endpoint->sent = 0;
+		/*
+		 * Write packet data to the FIFO.  spear_write_noniso_tx_fifo
+		 * will update endpoint->last with the number of bytes written
+		 * to the FIFO.
+		 */
+		spear_write_noniso_tx_fifo(endpoint);
+
+		writel(0x0, &inep_regs_p[ep_addr].write_done);
+	}
+
+	udc_unset_nak(endpoint->endpoint_address);
+
+	UDCDBG("<- Leaving device setup");
+}
+
+/*
+ * Handle endpoint 0 RX interrupt
+ */
+static void spear_udc_ep0_rx(struct usb_endpoint_instance *endpoint)
+{
+	u8 dummy[64];
+
+	UDCDBG("RX on EP0");
+
+	/* Check direction */
+	if ((ep0_urb->device_request.bmRequestType
+	     & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) {
+		/*
+		 * This rx interrupt must be for a control write data
+		 * stage packet.
+		 *
+		 * We don't support control write data stages.
+		 * We should never end up here.
+		 */
+
+		UDCDBG("Stalling unexpected EP0 control write "
+		       "data stage packet");
+		udc_stall_ep(0);
+	} else {
+		/*
+		 * This rx interrupt must be for a control read status
+		 * stage packet.
+		 */
+		UDCDBG("ACK on EP0 control read status stage packet");
+		u32 len = (readl(&outep_regs_p[0].endp_status) >> 11) & 0xfff;
+		usbgetpckfromfifo(0, dummy, len);
+	}
+}
+
+/*
+ * Handle endpoint 0 TX interrupt
+ */
+static void spear_udc_ep0_tx(struct usb_endpoint_instance *endpoint)
+{
+	struct usb_device_request *request = &ep0_urb->device_request;
+	int ep_addr;
+
+	UDCDBG("TX on EP0");
+
+	/* Check direction */
+	if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) ==
+	    USB_REQ_HOST2DEVICE) {
+		/*
+		 * This tx interrupt must be for a control write status
+		 * stage packet.
+		 */
+		UDCDBG("ACK on EP0 control write status stage packet");
+	} else {
+		/*
+		 * This tx interrupt must be for a control read data
+		 * stage packet.
+		 */
+		int wLength = le16_to_cpu(request->wLength);
+
+		/*
+		 * Update our count of bytes sent so far in this
+		 * transfer.
+		 */
+		endpoint->sent += endpoint->last;
+
+		/*
+		 * We are finished with this transfer if we have sent
+		 * all of the bytes in our tx urb (urb->actual_length)
+		 * unless we need a zero-length terminating packet.  We
+		 * need a zero-length terminating packet if we returned
+		 * fewer bytes than were requested (wLength) by the host,
+		 * and the number of bytes we returned is an exact
+		 * multiple of the packet size endpoint->tx_packetSize.
+		 */
+		if ((endpoint->sent == ep0_urb->actual_length) &&
+		    ((ep0_urb->actual_length == wLength) ||
+		     (endpoint->last != endpoint->tx_packetSize))) {
+			/* Done with control read data stage. */
+			UDCDBG("control read data stage complete");
+		} else {
+			/*
+			 * We still have another packet of data to send
+			 * in this control read data stage or else we
+			 * need a zero-length terminating packet.
+			 */
+			UDCDBG("ACK control read data stage packet");
+			spear_write_noniso_tx_fifo(endpoint);
+
+			ep_addr = endpoint->endpoint_address;
+			writel(0x0, &inep_regs_p[ep_addr].write_done);
+		}
+	}
+}
+
+static struct usb_endpoint_instance *spear_find_ep(int ep)
+{
+	int i;
+
+	for (i = 0; i < udc_device->bus->max_endpoints; i++) {
+		if ((udc_device->bus->endpoint_array[i].endpoint_address &
+		     USB_ENDPOINT_NUMBER_MASK) == ep)
+			return &udc_device->bus->endpoint_array[i];
+	}
+	return NULL;
+}
+
+/*
+ * Handle RX transaction on non-ISO endpoint.
+ * The ep argument is a physical endpoint number for a non-ISO IN endpoint
+ * in the range 1 to 15.
+ */
+static void spear_udc_epn_rx(int ep)
+{
+	int nbytes = 0;
+	struct urb *urb;
+	struct usb_endpoint_instance *endpoint = spear_find_ep(ep);
+
+	if (endpoint) {
+		urb = endpoint->rcv_urb;
+
+		if (urb) {
+			u8 *cp = urb->buffer + urb->actual_length;
+
+			nbytes = (readl(&outep_regs_p[ep].endp_status) >> 11) &
+			    0xfff;
+			usbgetpckfromfifo(ep, cp, nbytes);
+			usbd_rcv_complete(endpoint, nbytes, 0);
+		}
+	}
+}
+
+/*
+ * Handle TX transaction on non-ISO endpoint.
+ * The ep argument is a physical endpoint number for a non-ISO IN endpoint
+ * in the range 16 to 30.
+ */
+static void spear_udc_epn_tx(int ep)
+{
+	struct usb_endpoint_instance *endpoint = spear_find_ep(ep);
+
+	/*
+	 * We need to transmit a terminating zero-length packet now if
+	 * we have sent all of the data in this URB and the transfer
+	 * size was an exact multiple of the packet size.
+	 */
+	if (endpoint && endpoint->tx_urb && endpoint->tx_urb->actual_length) {
+		if (endpoint->last == endpoint->tx_packetSize) {
+			/* handle zero length packet here */
+			writel(0x0, &inep_regs_p[ep].write_done);
+		}
+		/* retire the data that was just sent */
+		usbd_tx_complete(endpoint);
+		/*
+		 * Check to see if we have more data ready to transmit
+		 * now.
+		 */
+		if (endpoint->tx_urb && endpoint->tx_urb->actual_length) {
+			/* write data to FIFO */
+			spear_write_noniso_tx_fifo(endpoint);
+			writel(0x0, &inep_regs_p[ep].write_done);
+
+		} else if (endpoint->tx_urb
+			   && (endpoint->tx_urb->actual_length == 0)) {
+			/* udc_set_nak(ep); */
+		}
+	}
+}
+
+/*
+ * Start of public functions.
+ */
+
+/* Called to start packet transmission. */
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint)
+{
+	udc_unset_nak(endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK);
+	return 0;
+}
+
+/* Start to initialize h/w stuff */
+int udc_init(void)
+{
+	int i;
+	u32 plug_st;
+
+	udc_device = NULL;
+
+	UDCDBG("starting");
+
+	readl(&plug_regs_p->plug_pending);
+
+	udc_disconnect();
+
+	for (i = 0; i < UDC_INIT_MDELAY; i++)
+		udelay(1000);
+
+	plug_st = readl(&plug_regs_p->plug_state);
+	writel(plug_st | PLUG_STATUS_EN, &plug_regs_p->plug_state);
+
+	writel(~0x0, &udc_regs_p->endp_int);
+	writel(~0x0, &udc_regs_p->dev_int_mask);
+	writel(~0x0, &udc_regs_p->endp_int_mask);
+
+	writel(DEV_CONF_FS_SPEED | DEV_CONF_REMWAKEUP | DEV_CONF_SELFPOW |
+	       /* Dev_Conf_SYNCFRAME | */
+	       DEV_CONF_PHYINT_16, &udc_regs_p->dev_conf);
+
+	writel(0x0, &udc_regs_p->dev_cntl);
+
+	/* Clear all interrupts pending */
+	writel(DEV_INT_MSK, &udc_regs_p->dev_int);
+
+	return 0;
+}
+
+/*
+ * udc_setup_ep - setup endpoint
+ * Associate a physical endpoint with endpoint_instance
+ */
+void udc_setup_ep(struct usb_device_instance *device,
+		  u32 ep, struct usb_endpoint_instance *endpoint)
+{
+	UDCDBGA("setting up endpoint addr %x", endpoint->endpoint_address);
+	int ep_addr;
+	int ep_num, ep_type;
+	int packet_size;
+	int buffer_size;
+	int attributes;
+	char *tt;
+	u32 endp_intmask;
+
+	tt = getenv("usbtty");
+	if (!tt)
+		tt = "generic";
+
+	ep_addr = endpoint->endpoint_address;
+	ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+
+	if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+		/* IN endpoint */
+		packet_size = endpoint->tx_packetSize;
+		buffer_size = packet_size * 2;
+		attributes = endpoint->tx_attributes;
+	} else {
+		/* OUT endpoint */
+		packet_size = endpoint->rcv_packetSize;
+		buffer_size = packet_size * 2;
+		attributes = endpoint->rcv_attributes;
+	}
+
+	switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ep_type = ENDP_EPTYPE_CNTL;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+	default:
+		ep_type = ENDP_EPTYPE_BULK;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		ep_type = ENDP_EPTYPE_INT;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ep_type = ENDP_EPTYPE_ISO;
+		break;
+	}
+
+	struct udc_endp_regs *out_p = &outep_regs_p[ep_num];
+	struct udc_endp_regs *in_p = &inep_regs_p[ep_num];
+
+	if (!ep_addr) {
+		/* Setup endpoint 0 */
+		buffer_size = packet_size;
+
+		writel(readl(&in_p->endp_cntl) | ENDP_CNTL_CNAK,
+		       &in_p->endp_cntl);
+
+		writel(readl(&out_p->endp_cntl) | ENDP_CNTL_CNAK,
+		       &out_p->endp_cntl);
+
+		writel(ENDP_CNTL_CONTROL | ENDP_CNTL_FLUSH, &in_p->endp_cntl);
+
+		writel(buffer_size / sizeof(int), &in_p->endp_bsorfn);
+
+		writel(packet_size, &in_p->endp_maxpacksize);
+
+		writel(ENDP_CNTL_CONTROL | ENDP_CNTL_RRDY, &out_p->endp_cntl);
+
+		writel(packet_size | ((buffer_size / sizeof(int)) << 16),
+		       &out_p->endp_maxpacksize);
+
+		writel((packet_size << 19) | ENDP_EPTYPE_CNTL,
+		       &udc_regs_p->udc_endp_reg[ep_num]);
+
+	} else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+		/* Setup the IN endpoint */
+		writel(0x0, &in_p->endp_status);
+		writel((ep_type << 4) | ENDP_CNTL_RRDY, &in_p->endp_cntl);
+		writel(buffer_size / sizeof(int), &in_p->endp_bsorfn);
+		writel(packet_size, &in_p->endp_maxpacksize);
+
+		if (!strcmp(tt, "cdc_acm")) {
+			if (ep_type == ENDP_EPTYPE_INT) {
+				/* Conf no. 1 Interface no. 0 */
+				writel((packet_size << 19) |
+				       ENDP_EPDIR_IN | (1 << 7) |
+				       (0 << 11) | (ep_type << 5) | ep_num,
+				       &udc_regs_p->udc_endp_reg[ep_num]);
+			} else {
+				/* Conf no. 1 Interface no. 1 */
+				writel((packet_size << 19) |
+				       ENDP_EPDIR_IN | (1 << 7) |
+				       (1 << 11) | (ep_type << 5) | ep_num,
+				       &udc_regs_p->udc_endp_reg[ep_num]);
+			}
+		} else {
+			/* Conf no. 1 Interface no. 0 */
+			writel((packet_size << 19) |
+			       ENDP_EPDIR_IN | (1 << 7) |
+			       (0 << 11) | (ep_type << 5) | ep_num,
+			       &udc_regs_p->udc_endp_reg[ep_num]);
+		}
+
+	} else {
+		/* Setup the OUT endpoint */
+		writel(0x0, &out_p->endp_status);
+		writel((ep_type << 4) | ENDP_CNTL_RRDY, &out_p->endp_cntl);
+		writel(packet_size | ((buffer_size / sizeof(int)) << 16),
+		       &out_p->endp_maxpacksize);
+
+		if (!strcmp(tt, "cdc_acm")) {
+			writel((packet_size << 19) |
+			       ENDP_EPDIR_OUT | (1 << 7) |
+			       (1 << 11) | (ep_type << 5) | ep_num,
+			       &udc_regs_p->udc_endp_reg[ep_num]);
+		} else {
+			writel((packet_size << 19) |
+			       ENDP_EPDIR_OUT | (1 << 7) |
+			       (0 << 11) | (ep_type << 5) | ep_num,
+			       &udc_regs_p->udc_endp_reg[ep_num]);
+		}
+
+	}
+
+	endp_intmask = readl(&udc_regs_p->endp_int_mask);
+	endp_intmask &= ~((1 << ep_num) | 0x10000 << ep_num);
+	writel(endp_intmask, &udc_regs_p->endp_int_mask);
+}
+
+/* Turn on the USB connection by enabling the pullup resistor */
+void udc_connect(void)
+{
+	u32 plug_st;
+
+	plug_st = readl(&plug_regs_p->plug_state);
+	plug_st &= ~(PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE);
+	writel(plug_st, &plug_regs_p->plug_state);
+}
+
+/* Turn off the USB connection by disabling the pullup resistor */
+void udc_disconnect(void)
+{
+	u32 plug_st;
+
+	plug_st = readl(&plug_regs_p->plug_state);
+	plug_st |= (PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE);
+	writel(plug_st, &plug_regs_p->plug_state);
+}
+
+/* Switch on the UDC */
+void udc_enable(struct usb_device_instance *device)
+{
+	UDCDBGA("enable device %p, status %d", device, device->status);
+
+	/* Save the device structure pointer */
+	udc_device = device;
+
+	/* Setup ep0 urb */
+	if (!ep0_urb) {
+		ep0_urb =
+		    usbd_alloc_urb(udc_device, udc_device->bus->endpoint_array);
+	} else {
+		serial_printf("udc_enable: ep0_urb already allocated %p\n",
+			      ep0_urb);
+	}
+
+	writel(DEV_INT_SOF, &udc_regs_p->dev_int_mask);
+}
+
+/**
+ * udc_startup - allow udc code to do any additional startup
+ */
+void udc_startup_events(struct usb_device_instance *device)
+{
+	/* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
+	usbd_device_event_irq(device, DEVICE_INIT, 0);
+
+	/*
+	 * The DEVICE_CREATE event puts the USB device in the state
+	 * STATE_ATTACHED.
+	 */
+	usbd_device_event_irq(device, DEVICE_CREATE, 0);
+
+	/*
+	 * Some USB controller driver implementations signal
+	 * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
+	 * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
+	 * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
+	 * The SPEAr USB client controller has the capability to detect when the
+	 * USB cable is connected to a powered USB bus, so we will defer the
+	 * DEVICE_HUB_CONFIGURED and DEVICE_RESET events until later.
+	 */
+
+	udc_enable(device);
+}
+
+/*
+ * Plug detection interrupt handling
+ */
+void spear_udc_plug_irq(void)
+{
+	if (readl(&plug_regs_p->plug_state) & PLUG_STATUS_ATTACHED) {
+		/*
+		 * USB cable attached
+		 * Turn off PHY reset bit (PLUG detect).
+		 * Switch PHY opmode to normal operation (PLUG detect).
+		 */
+		udc_connect();
+		writel(DEV_INT_SOF, &udc_regs_p->dev_int_mask);
+
+		UDCDBG("device attached and powered");
+		udc_state_transition(udc_device->device_state, STATE_POWERED);
+	} else {
+		/*
+		 * USB cable detached
+		 * Reset the PHY and switch the mode.
+		 */
+		udc_disconnect();
+		writel(~0x0, &udc_regs_p->dev_int_mask);
+
+		UDCDBG("device detached or unpowered");
+		udc_state_transition(udc_device->device_state, STATE_ATTACHED);
+	}
+}
+
+/*
+ * Device interrupt handling
+ */
+void spear_udc_dev_irq(void)
+{
+	if (readl(&udc_regs_p->dev_int) & DEV_INT_USBRESET) {
+		writel(~0x0, &udc_regs_p->endp_int_mask);
+
+		udc_connect();
+
+		writel(readl(&inep_regs_p[0].endp_cntl) | ENDP_CNTL_FLUSH,
+		       &inep_regs_p[0].endp_cntl);
+
+		writel(DEV_INT_USBRESET, &udc_regs_p->dev_int);
+
+		UDCDBG("device reset in progess");
+		udc_state_transition(udc_device->device_state, STATE_DEFAULT);
+	}
+
+	/* Device Enumeration completed */
+	if (readl(&udc_regs_p->dev_int) & DEV_INT_ENUM) {
+		writel(DEV_INT_ENUM, &udc_regs_p->dev_int);
+
+		/* Endpoint interrupt enabled for Ctrl IN & Ctrl OUT */
+		writel(readl(&udc_regs_p->endp_int_mask) & ~0x10001,
+		       &udc_regs_p->endp_int_mask);
+
+		UDCDBG("default -> addressed");
+		udc_state_transition(udc_device->device_state, STATE_ADDRESSED);
+	}
+
+	/* The USB will be in SUSPEND in 3 ms */
+	if (readl(&udc_regs_p->dev_int) & DEV_INT_INACTIVE) {
+		writel(DEV_INT_INACTIVE, &udc_regs_p->dev_int);
+
+		UDCDBG("entering inactive state");
+		/* usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0); */
+	}
+
+	/* SetConfiguration command received */
+	if (readl(&udc_regs_p->dev_int) & DEV_INT_SETCFG) {
+		writel(DEV_INT_SETCFG, &udc_regs_p->dev_int);
+
+		UDCDBG("entering configured state");
+		udc_state_transition(udc_device->device_state,
+				     STATE_CONFIGURED);
+	}
+
+	/* SetInterface command received */
+	if (readl(&udc_regs_p->dev_int) & DEV_INT_SETINTF)
+		writel(DEV_INT_SETINTF, &udc_regs_p->dev_int);
+
+	/* USB Suspend detected on cable */
+	if (readl(&udc_regs_p->dev_int) & DEV_INT_SUSPUSB) {
+		writel(DEV_INT_SUSPUSB, &udc_regs_p->dev_int);
+
+		UDCDBG("entering suspended state");
+		usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0);
+	}
+
+	/* USB Start-Of-Frame detected on cable */
+	if (readl(&udc_regs_p->dev_int) & DEV_INT_SOF)
+		writel(DEV_INT_SOF, &udc_regs_p->dev_int);
+}
+
+/*
+ * Endpoint interrupt handling
+ */
+void spear_udc_endpoint_irq(void)
+{
+	while (readl(&udc_regs_p->endp_int) & ENDP0_INT_CTRLOUT) {
+
+		writel(ENDP0_INT_CTRLOUT, &udc_regs_p->endp_int);
+
+		if ((readl(&outep_regs_p[0].endp_status) & ENDP_STATUS_OUTMSK)
+		    == ENDP_STATUS_OUT_SETUP) {
+			spear_udc_setup(udc_device->bus->endpoint_array + 0);
+			writel(ENDP_STATUS_OUT_SETUP,
+			       &outep_regs_p[0].endp_status);
+
+		} else if ((readl(&outep_regs_p[0].endp_status) &
+			    ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_DATA) {
+			spear_udc_ep0_rx(udc_device->bus->endpoint_array + 0);
+			writel(ENDP_STATUS_OUT_DATA,
+			       &outep_regs_p[0].endp_status);
+
+		} else if ((readl(&outep_regs_p[0].endp_status) &
+			    ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_NONE) {
+			/* NONE received */
+		}
+
+		writel(0x0, &outep_regs_p[0].endp_status);
+	}
+
+	if (readl(&udc_regs_p->endp_int) & ENDP0_INT_CTRLIN) {
+		spear_udc_ep0_tx(udc_device->bus->endpoint_array + 0);
+
+		writel(ENDP_STATUS_IN, &inep_regs_p[0].endp_status);
+		writel(ENDP0_INT_CTRLIN, &udc_regs_p->endp_int);
+	}
+
+	while (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOOUT_MSK) {
+		u32 epnum = 0;
+		u32 ep_int = readl(&udc_regs_p->endp_int) &
+		    ENDP_INT_NONISOOUT_MSK;
+
+		ep_int >>= 16;
+		while (0x0 == (ep_int & 0x1)) {
+			ep_int >>= 1;
+			epnum++;
+		}
+
+		writel((1 << 16) << epnum, &udc_regs_p->endp_int);
+
+		if ((readl(&outep_regs_p[epnum].endp_status) &
+		     ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_DATA) {
+
+			spear_udc_epn_rx(epnum);
+			writel(ENDP_STATUS_OUT_DATA,
+			       &outep_regs_p[epnum].endp_status);
+		} else if ((readl(&outep_regs_p[epnum].endp_status) &
+			    ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_NONE) {
+			writel(0x0, &outep_regs_p[epnum].endp_status);
+		}
+	}
+
+	if (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOIN_MSK) {
+		u32 epnum = 0;
+		u32 ep_int = readl(&udc_regs_p->endp_int) &
+		    ENDP_INT_NONISOIN_MSK;
+
+		while (0x0 == (ep_int & 0x1)) {
+			ep_int >>= 1;
+			epnum++;
+		}
+
+		if (readl(&inep_regs_p[epnum].endp_status) & ENDP_STATUS_IN) {
+			writel(ENDP_STATUS_IN,
+			       &outep_regs_p[epnum].endp_status);
+			spear_udc_epn_tx(epnum);
+
+			writel(ENDP_STATUS_IN,
+			       &outep_regs_p[epnum].endp_status);
+		}
+
+		writel((1 << epnum), &udc_regs_p->endp_int);
+	}
+}
+
+/*
+ * UDC interrupts
+ */
+void udc_irq(void)
+{
+	/*
+	 * Loop while we have interrupts.
+	 * If we don't do this, the input chain
+	 * polling delay is likely to miss
+	 * host requests.
+	 */
+	while (readl(&plug_regs_p->plug_pending))
+		spear_udc_plug_irq();
+
+	while (readl(&udc_regs_p->dev_int))
+		spear_udc_dev_irq();
+
+	if (readl(&udc_regs_p->endp_int))
+		spear_udc_endpoint_irq();
+}
+
+/* Flow control */
+void udc_set_nak(int epid)
+{
+	writel(readl(&inep_regs_p[epid].endp_cntl) | ENDP_CNTL_SNAK,
+	       &inep_regs_p[epid].endp_cntl);
+
+	writel(readl(&outep_regs_p[epid].endp_cntl) | ENDP_CNTL_SNAK,
+	       &outep_regs_p[epid].endp_cntl);
+}
+
+void udc_unset_nak(int epid)
+{
+	u32 val;
+
+	val = readl(&inep_regs_p[epid].endp_cntl);
+	val &= ~ENDP_CNTL_SNAK;
+	val |= ENDP_CNTL_CNAK;
+	writel(val, &inep_regs_p[epid].endp_cntl);
+
+	val = readl(&outep_regs_p[epid].endp_cntl);
+	val &= ~ENDP_CNTL_SNAK;
+	val |= ENDP_CNTL_CNAK;
+	writel(val, &outep_regs_p[epid].endp_cntl);
+}
diff --git a/include/asm-arm/arch-kirkwood/gpio.h b/include/asm-arm/arch-kirkwood/gpio.h
index b5bacde..cd1bc00 100644
--- a/include/asm-arm/arch-kirkwood/gpio.h
+++ b/include/asm-arm/arch-kirkwood/gpio.h
@@ -1,9 +1,23 @@
 /*
  * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 /*
diff --git a/include/asm-arm/arch-kirkwood/mpp.h b/include/asm-arm/arch-kirkwood/mpp.h
index bc74278..b3c090e 100644
--- a/include/asm-arm/arch-kirkwood/mpp.h
+++ b/include/asm-arm/arch-kirkwood/mpp.h
@@ -3,9 +3,23 @@
  *
  * Copyright 2009: Marvell Technology Group Ltd.
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
  */
 
 #ifndef __KIRKWOOD_MPP_H
diff --git a/include/asm-arm/arch-spear/hardware.h b/include/asm-arm/arch-spear/hardware.h
new file mode 100644
index 0000000..818f36c
--- /dev/null
+++ b/include/asm-arm/arch-spear/hardware.h
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#define CONFIG_SYS_USBD_BASE			(0xE1100000)
+#define CONFIG_SYS_PLUG_BASE			(0xE1200000)
+#define CONFIG_SYS_FIFO_BASE			(0xE1000800)
+#define CONFIG_SYS_SMI_BASE			(0xFC000000)
+#define CONFIG_SPEAR_SYSCNTLBASE		(0xFCA00000)
+#define CONFIG_SPEAR_TIMERBASE			(0xFC800000)
+#define CONFIG_SPEAR_MISCBASE			(0xFCA80000)
+
+#define CONFIG_SYS_NAND_CLE			(1 << 16)
+#define CONFIG_SYS_NAND_ALE			(1 << 17)
+
+#if defined(CONFIG_SPEAR600)
+#define CONFIG_SYS_I2C_BASE			(0xD0200000)
+#define CONFIG_SPEAR_FSMCBASE			(0xD1800000)
+
+#elif defined(CONFIG_SPEAR300)
+#define CONFIG_SYS_I2C_BASE			(0xD0180000)
+#define CONFIG_SPEAR_FSMCBASE			(0x94000000)
+
+#elif defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_I2C_BASE			(0xD0180000)
+#define CONFIG_SPEAR_FSMCBASE			(0x44000000)
+
+#undef CONFIG_SYS_NAND_CLE
+#undef CONFIG_SYS_NAND_ALE
+#define CONFIG_SYS_NAND_CLE			(1 << 17)
+#define CONFIG_SYS_NAND_ALE			(1 << 16)
+
+#define CONFIG_SPEAR_EMIBASE			(0x4F000000)
+#define CONFIG_SPEAR_RASBASE			(0xB4000000)
+
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_I2C_BASE			(0xD0180000)
+#define CONFIG_SPEAR_FSMCBASE			(0x4C000000)
+
+#define CONFIG_SPEAR_EMIBASE			(0x40000000)
+#define CONFIG_SPEAR_RASBASE			(0xB3000000)
+
+#endif
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-spear/spr_defs.h b/include/asm-arm/arch-spear/spr_defs.h
new file mode 100644
index 0000000..fa8412c
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_defs.h
@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SPR_DEFS_H__
+#define __SPR_DEFS_H__
+
+extern int spear_board_init(ulong);
+extern void setfreq(unsigned int, unsigned int);
+extern unsigned int setfreq_sz;
+
+struct chip_data {
+	int cpufreq;
+	int dramfreq;
+	int dramtype;
+	uchar version[32];
+};
+
+/* HW mac id in i2c memory definitions */
+#define MAGIC_OFF	0x0
+#define MAGIC_LEN	0x2
+#define MAGIC_BYTE0	0x55
+#define MAGIC_BYTE1	0xAA
+#define MAC_OFF		0x2
+#define MAC_LEN		0x6
+
+#endif
diff --git a/include/asm-arm/arch-spear/spr_emi.h b/include/asm-arm/arch-spear/spr_emi.h
new file mode 100644
index 0000000..c1f1c2a
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_emi.h
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2009
+ * Ryan CHEN, ST Micoelectronics, ryan.chen@st.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SPEAR_EMI_H__
+#define __SPEAR_EMI_H__
+
+#ifdef CONFIG_SPEAR_EMI
+
+struct emi_bank_regs {
+	u32 tap;
+	u32 tsdp;
+	u32 tdpw;
+	u32 tdpr;
+	u32 tdcs;
+	u32 control;
+};
+
+struct emi_regs {
+	struct emi_bank_regs bank_regs[CONFIG_SYS_MAX_FLASH_BANKS];
+	u32 tout;
+	u32 ack;
+	u32 irq;
+};
+
+#define EMI_ACKMSK		0x40
+
+/* control register definitions */
+#define EMI_CNTL_ENBBYTEW	(1 << 2)
+#define EMI_CNTL_ENBBYTER	(1 << 3)
+#define EMI_CNTL_ENBBYTERW	(EMI_CNTL_ENBBYTER | EMI_CNTL_ENBBYTEW)
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-spear/spr_gpt.h b/include/asm-arm/arch-spear/spr_gpt.h
new file mode 100755
index 0000000..965b5ab
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_gpt.h
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPR_GPT_H
+#define _SPR_GPT_H
+
+struct gpt_regs {
+	u8 reserved[0x80];
+	u32 control;
+	u32 status;
+	u32 compare;
+	u32 count;
+	u32 capture_re;
+	u32 capture_fe;
+};
+
+/*
+ * TIMER_CONTROL register settings
+ */
+
+#define GPT_PRESCALER_MASK		0x000F
+#define GPT_PRESCALER_1			0x0000
+#define GPT_PRESCALER_2 		0x0001
+#define GPT_PRESCALER_4 		0x0002
+#define GPT_PRESCALER_8 		0x0003
+#define GPT_PRESCALER_16		0x0004
+#define GPT_PRESCALER_32		0x0005
+#define GPT_PRESCALER_64		0x0006
+#define GPT_PRESCALER_128		0x0007
+#define GPT_PRESCALER_256		0x0008
+
+#define GPT_MODE_SINGLE_SHOT		0x0010
+#define GPT_MODE_AUTO_RELOAD		0x0000
+
+#define GPT_ENABLE			0x0020
+
+#define GPT_CAPT_MODE_MASK		0x00C0
+#define GPT_CAPT_MODE_NONE		0x0000
+#define GPT_CAPT_MODE_RE		0x0040
+#define GPT_CAPT_MODE_FE		0x0080
+#define GPT_CAPT_MODE_BOTH		0x00C0
+
+#define GPT_INT_MATCH			0x0100
+#define GPT_INT_FE			0x0200
+#define GPT_INT_RE			0x0400
+
+/*
+ * TIMER_STATUS register settings
+ */
+
+#define GPT_STS_MATCH			0x0001
+#define GPT_STS_FE			0x0002
+#define GPT_STS_RE			0x0004
+
+/*
+ * TIMER_COMPARE register settings
+ */
+
+#define GPT_FREE_RUNNING		0xFFFF
+
+/* Timer, HZ specific defines */
+#define CONFIG_SPEAR_HZ			(1000)
+#define CONFIG_SPEAR_HZ_CLOCK		(8300000)
+
+#endif
diff --git a/include/asm-arm/arch-spear/spr_i2c.h b/include/asm-arm/arch-spear/spr_i2c.h
new file mode 100755
index 0000000..7521ebc
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_i2c.h
@@ -0,0 +1,146 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SPR_I2C_H_
+#define __SPR_I2C_H_
+
+struct i2c_regs {
+	u32 ic_con;
+	u32 ic_tar;
+	u32 ic_sar;
+	u32 ic_hs_maddr;
+	u32 ic_cmd_data;
+	u32 ic_ss_scl_hcnt;
+	u32 ic_ss_scl_lcnt;
+	u32 ic_fs_scl_hcnt;
+	u32 ic_fs_scl_lcnt;
+	u32 ic_hs_scl_hcnt;
+	u32 ic_hs_scl_lcnt;
+	u32 ic_intr_stat;
+	u32 ic_intr_mask;
+	u32 ic_raw_intr_stat;
+	u32 ic_rx_tl;
+	u32 ic_tx_tl;
+	u32 ic_clr_intr;
+	u32 ic_clr_rx_under;
+	u32 ic_clr_rx_over;
+	u32 ic_clr_tx_over;
+	u32 ic_clr_rd_req;
+	u32 ic_clr_tx_abrt;
+	u32 ic_clr_rx_done;
+	u32 ic_clr_activity;
+	u32 ic_clr_stop_det;
+	u32 ic_clr_start_det;
+	u32 ic_clr_gen_call;
+	u32 ic_enable;
+	u32 ic_status;
+	u32 ic_txflr;
+	u32 ix_rxflr;
+	u32 reserved_1;
+	u32 ic_tx_abrt_source;
+};
+
+#define IC_CLK			166
+#define NANO_TO_MICRO		1000
+
+/* High and low times in different speed modes (in ns) */
+#define MIN_SS_SCL_HIGHTIME	4000
+#define MIN_SS_SCL_LOWTIME	5000
+#define MIN_FS_SCL_HIGHTIME	800
+#define MIN_FS_SCL_LOWTIME	1700
+#define MIN_HS_SCL_HIGHTIME	60
+#define MIN_HS_SCL_LOWTIME	160
+
+/* Worst case timeout for 1 byte is kept as 2ms */
+#define I2C_BYTE_TO		(CONFIG_SYS_HZ/500)
+#define I2C_STOPDET_TO		(CONFIG_SYS_HZ/500)
+#define I2C_BYTE_TO_BB		(I2C_BYTE_TO * 16)
+
+/* i2c control register definitions */
+#define IC_CON_SD		0x0040
+#define IC_CON_RE		0x0020
+#define IC_CON_10BITADDRMASTER	0x0010
+#define IC_CON_10BITADDR_SLAVE	0x0008
+#define IC_CON_SPD_MSK		0x0006
+#define IC_CON_SPD_SS		0x0002
+#define IC_CON_SPD_FS		0x0004
+#define IC_CON_SPD_HS		0x0006
+#define IC_CON_MM		0x0001
+
+/* i2c target address register definitions */
+#define TAR_ADDR		0x0050
+
+/* i2c slave address register definitions */
+#define IC_SLAVE_ADDR		0x0002
+
+/* i2c data buffer and command register definitions */
+#define IC_CMD			0x0100
+
+/* i2c interrupt status register definitions */
+#define IC_GEN_CALL		0x0800
+#define IC_START_DET		0x0400
+#define IC_STOP_DET		0x0200
+#define IC_ACTIVITY		0x0100
+#define IC_RX_DONE		0x0080
+#define IC_TX_ABRT		0x0040
+#define IC_RD_REQ		0x0020
+#define IC_TX_EMPTY		0x0010
+#define IC_TX_OVER		0x0008
+#define IC_RX_FULL		0x0004
+#define IC_RX_OVER 		0x0002
+#define IC_RX_UNDER		0x0001
+
+/* fifo threshold register definitions */
+#define IC_TL0			0x00
+#define IC_TL1			0x01
+#define IC_TL2			0x02
+#define IC_TL3			0x03
+#define IC_TL4			0x04
+#define IC_TL5			0x05
+#define IC_TL6			0x06
+#define IC_TL7			0x07
+#define IC_RX_TL		IC_TL0
+#define IC_TX_TL		IC_TL0
+
+/* i2c enable register definitions */
+#define IC_ENABLE_0B		0x0001
+
+/* i2c status register  definitions */
+#define IC_STATUS_SA		0x0040
+#define IC_STATUS_MA		0x0020
+#define IC_STATUS_RFF		0x0010
+#define IC_STATUS_RFNE		0x0008
+#define IC_STATUS_TFE		0x0004
+#define IC_STATUS_TFNF		0x0002
+#define IC_STATUS_ACT		0x0001
+
+/* Speed Selection */
+#define IC_SPEED_MODE_STANDARD	1
+#define IC_SPEED_MODE_FAST	2
+#define IC_SPEED_MODE_MAX	3
+
+#define I2C_MAX_SPEED		3400000
+#define I2C_FAST_SPEED		400000
+#define I2C_STANDARD_SPEED	100000
+
+#endif /* __SPR_I2C_H_ */
diff --git a/include/asm-arm/arch-spear/spr_misc.h b/include/asm-arm/arch-spear/spr_misc.h
new file mode 100644
index 0000000..8b96d9b
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_misc.h
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPR_MISC_H
+#define _SPR_MISC_H
+
+struct misc_regs {
+	u32 auto_cfg_reg;	/* 0x0 */
+	u32 armdbg_ctr_reg;	/* 0x4 */
+	u32 pll1_cntl;		/* 0x8 */
+	u32 pll1_frq;		/* 0xc */
+	u32 pll1_mod;		/* 0x10 */
+	u32 pll2_cntl;		/* 0x14 */
+	u32 pll2_frq;		/* 0x18 */
+	u32 pll2_mod;		/* 0x1C */
+	u32 pll_ctr_reg;	/* 0x20 */
+	u32 amba_clk_cfg;	/* 0x24 */
+	u32 periph_clk_cfg;	/* 0x28 */
+	u32 periph1_clken;	/* 0x2C */
+	u32 periph2_clken;	/* 0x30 */
+	u32 ras_clken;		/* 0x34 */
+	u32 periph1_rst;	/* 0x38 */
+	u32 periph2_rst;	/* 0x3C */
+	u32 ras_rst;		/* 0x40 */
+	u32 prsc1_clk_cfg;	/* 0x44 */
+	u32 prsc2_clk_cfg;	/* 0x48 */
+	u32 prsc3_clk_cfg;	/* 0x4C */
+	u32 amem_cfg_ctrl;	/* 0x50 */
+	u32 port_cfg_ctrl;	/* 0x54 */
+	u32 reserved_1;		/* 0x58 */
+	u32 clcd_synth_clk;	/* 0x5C */
+	u32 irda_synth_clk;	/* 0x60 */
+	u32 uart_synth_clk;	/* 0x64 */
+	u32 gmac_synth_clk;	/* 0x68 */
+	u32 ras_synth1_clk;	/* 0x6C */
+	u32 ras_synth2_clk;	/* 0x70 */
+	u32 ras_synth3_clk;	/* 0x74 */
+	u32 ras_synth4_clk;	/* 0x78 */
+	u32 arb_icm_ml1;	/* 0x7C */
+	u32 arb_icm_ml2;	/* 0x80 */
+	u32 arb_icm_ml3;	/* 0x84 */
+	u32 arb_icm_ml4;	/* 0x88 */
+	u32 arb_icm_ml5;	/* 0x8C */
+	u32 arb_icm_ml6;	/* 0x90 */
+	u32 arb_icm_ml7;	/* 0x94 */
+	u32 arb_icm_ml8;	/* 0x98 */
+	u32 arb_icm_ml9;	/* 0x9C */
+	u32 dma_src_sel;	/* 0xA0 */
+	u32 uphy_ctr_reg;	/* 0xA4 */
+	u32 gmac_ctr_reg;	/* 0xA8 */
+	u32 port_bridge_ctrl;	/* 0xAC */
+	u32 reserved_2[4];	/* 0xB0--0xBC */
+	u32 prc1_ilck_ctrl_reg;	/* 0xC0 */
+	u32 prc2_ilck_ctrl_reg;	/* 0xC4 */
+	u32 prc3_ilck_ctrl_reg;	/* 0xC8 */
+	u32 prc4_ilck_ctrl_reg;	/* 0xCC */
+	u32 prc1_intr_ctrl_reg;	/* 0xD0 */
+	u32 prc2_intr_ctrl_reg;	/* 0xD4 */
+	u32 prc3_intr_ctrl_reg;	/* 0xD8 */
+	u32 prc4_intr_ctrl_reg;	/* 0xDC */
+	u32 powerdown_cfg_reg;	/* 0xE0 */
+	u32 ddr_1v8_compensation;	/* 0xE4  */
+	u32 ddr_2v5_compensation;	/* 0xE8 */
+	u32 core_3v3_compensation;	/* 0xEC */
+	u32 ddr_pad;		/* 0xF0 */
+	u32 bist1_ctr_reg;	/* 0xF4 */
+	u32 bist2_ctr_reg;	/* 0xF8 */
+	u32 bist3_ctr_reg;	/* 0xFC */
+	u32 bist4_ctr_reg;	/* 0x100 */
+	u32 bist5_ctr_reg;	/* 0x104 */
+	u32 bist1_rslt_reg;	/* 0x108 */
+	u32 bist2_rslt_reg;	/* 0x10C */
+	u32 bist3_rslt_reg;	/* 0x110 */
+	u32 bist4_rslt_reg;	/* 0x114 */
+	u32 bist5_rslt_reg;	/* 0x118 */
+	u32 syst_error_reg;	/* 0x11C */
+	u32 reserved_3[0x1FB8];	/* 0x120--0x7FFC */
+	u32 ras_gpp1_in;	/* 0x8000 */
+	u32 ras_gpp2_in;	/* 0x8004 */
+	u32 ras_gpp1_out;	/* 0x8008 */
+	u32 ras_gpp2_out;	/* 0x800C */
+};
+
+/* AUTO_CFG_REG value */
+#define MISC_SOCCFGMSK                  0x0000003F
+#define MISC_SOCCFG30                   0x0000000C
+#define MISC_SOCCFG31                   0x0000000D
+#define MISC_NANDDIS			0x00020000
+
+/* PERIPH_CLK_CFG value */
+#define MISC_GPT3SYNTH			0x00000400
+#define MISC_GPT4SYNTH			0x00000800
+
+/* PRSC_CLK_CFG value */
+/*
+ * Fout = Fin / (2^(N+1) * (M + 1))
+ */
+#define MISC_PRSC_N_1			0x00001000
+#define MISC_PRSC_M_9			0x00000009
+#define MISC_PRSC_N_4			0x00004000
+#define MISC_PRSC_M_399			0x0000018F
+#define MISC_PRSC_N_6			0x00006000
+#define MISC_PRSC_M_2593		0x00000A21
+#define MISC_PRSC_M_124			0x0000007C
+#define MISC_PRSC_CFG			(MISC_PRSC_N_1 | MISC_PRSC_M_9)
+
+/* PERIPH1_CLKEN, PERIPH1_RST value */
+#define MISC_USBDENB			0x01000000
+
+#endif
diff --git a/include/asm-arm/arch-spear/spr_nand.h b/include/asm-arm/arch-spear/spr_nand.h
new file mode 100644
index 0000000..2b63dc7
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_nand.h
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SPR_NAND_H__
+#define __SPR_NAND_H__
+
+struct fsmc_regs {
+	u32 reserved_1[0x10];
+	u32 genmemctrl_pc;
+	u32 reserved_2;
+	u32 genmemctrl_comm;
+	u32 genmemctrl_attrib;
+	u32 reserved_3;
+	u32 genmemctrl_ecc;
+};
+
+/* genmemctrl_pc register definitions */
+#define FSMC_RESET		(1 << 0)
+#define FSMC_WAITON		(1 << 1)
+#define FSMC_ENABLE		(1 << 2)
+#define FSMC_DEVTYPE_NAND	(1 << 3)
+#define FSMC_DEVWID_8		(0 << 4)
+#define FSMC_DEVWID_16		(1 << 4)
+#define FSMC_ECCEN		(1 << 6)
+#define FSMC_ECCPLEN_512	(0 << 7)
+#define FSMC_ECCPLEN_256	(1 << 7)
+#define FSMC_TCLR_1		(1 << 9)
+#define FSMC_TAR_1		(1 << 13)
+
+/* genmemctrl_comm register definitions */
+#define FSMC_TSET_0		(0 << 0)
+#define FSMC_TWAIT_6		(6 << 8)
+#define FSMC_THOLD_4		(4 << 16)
+#define FSMC_THIZ_1		(1 << 24)
+
+extern int spear_nand_init(struct nand_chip *nand);
+#endif
diff --git a/include/asm-arm/arch-spear/spr_smi.h b/include/asm-arm/arch-spear/spr_smi.h
new file mode 100755
index 0000000..06df745
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_smi.h
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef SPR_SMI_H
+#define SPR_SMI_H
+
+/* 0xF800.0000 . 0xFBFF.FFFF	64MB	SMI (Serial Flash Mem) */
+/* 0xFC00.0000 . 0xFC1F.FFFF	2MB	SMI (Serial Flash Reg.) */
+
+#define FLASH_START_ADDRESS	CONFIG_SYS_FLASH_BASE
+#define FLASH_BANK_SIZE		CONFIG_SYS_FLASH_BANK_SIZE
+
+#define SMIBANK0_BASE		(FLASH_START_ADDRESS)
+#define SMIBANK1_BASE		(SMIBANK0_BASE + FLASH_BANK_SIZE)
+#define SMIBANK2_BASE		(SMIBANK1_BASE + FLASH_BANK_SIZE)
+#define SMIBANK3_BASE		(SMIBANK2_BASE + FLASH_BANK_SIZE)
+
+#define BANK0			0
+#define BANK1			1
+#define BANK2			2
+#define BANK3			3
+
+struct smi_regs {
+	u32 smi_cr1;
+	u32 smi_cr2;
+	u32 smi_sr;
+	u32 smi_tr;
+	u32 smi_rr;
+};
+
+/* CONTROL REG 1 */
+#define BANK_EN			0x0000000F	/* enables all banks */
+#define DSEL_TIME		0x00000060	/* Deselect time */
+#define PRESCAL5		0x00000500	/* AHB_CK prescaling value */
+#define PRESCALA		0x00000A00	/* AHB_CK prescaling value */
+#define PRESCAL3		0x00000300	/* AHB_CK prescaling value */
+#define PRESCAL4		0x00000400	/* AHB_CK prescaling value */
+#define SW_MODE			0x10000000	/* enables SW Mode */
+#define WB_MODE			0x20000000	/* Write Burst Mode */
+#define FAST_MODE		0x00008000	/* Fast Mode */
+#define HOLD1			0x00010000
+
+/* CONTROL REG 2 */
+#define RD_STATUS_REG		0x00000400	/* reads status reg */
+#define WE			0x00000800	/* Write Enable */
+#define BANK0_SEL		0x00000000	/* Select Banck0 */
+#define BANK1_SEL		0x00001000	/* Select Banck1 */
+#define BANK2_SEL		0x00002000	/* Select Banck2 */
+#define BANK3_SEL		0x00003000	/* Select Banck3 */
+#define BANKSEL_SHIFT		12
+#define SEND			0x00000080	/* Send data */
+#define TX_LEN_1		0x00000001	/* data length = 1 byte */
+#define TX_LEN_2		0x00000002	/* data length = 2 byte */
+#define TX_LEN_3		0x00000003	/* data length = 3 byte */
+#define TX_LEN_4		0x00000004	/* data length = 4 byte */
+#define RX_LEN_1		0x00000010	/* data length = 1 byte */
+#define RX_LEN_2		0x00000020	/* data length = 2 byte */
+#define RX_LEN_3		0x00000030	/* data length = 3 byte */
+#define RX_LEN_4		0x00000040	/* data length = 4 byte */
+#define TFIE			0x00000100	/* Tx Flag Interrupt Enable */
+#define WCIE			0x00000200	/* WCF Interrupt Enable */
+
+/* STATUS_REG */
+#define INT_WCF_CLR		0xFFFFFDFF	/* clear: WCF clear */
+#define INT_TFF_CLR		0xFFFFFEFF	/* clear: TFF clear */
+#define WIP_BIT			0x00000001	/* WIP Bit of SPI SR */
+#define WEL_BIT			0x00000002	/* WEL Bit of SPI SR */
+#define RSR			0x00000005	/* Read Status regiser */
+#define TFF			0x00000100	/* Transfer Finished FLag */
+#define WCF			0x00000200	/* Transfer Finished FLag */
+#define ERF1			0x00000400	/* Error Flag 1 */
+#define ERF2			0x00000800	/* Error Flag 2 */
+#define WM0			0x00001000	/* WM Bank 0 */
+#define WM1			0x00002000	/* WM Bank 1 */
+#define WM2			0x00004000	/* WM Bank 2 */
+#define WM3			0x00008000	/* WM Bank 3 */
+#define WM_SHIFT		12
+
+/* TR REG */
+#define READ_ID			0x0000009F	/* Read Identification */
+#define BULK_ERASE		0x000000C7	/* BULK erase */
+#define SECTOR_ERASE		0x000000D8	/* SECTOR erase */
+#define WRITE_ENABLE		0x00000006	/* Wenable command to FLASH */
+
+struct flash_dev {
+	u32 density;
+	ulong size;
+	ushort sector_count;
+};
+
+#define SFLASH_PAGE_SIZE	0x100	/* flash page size */
+#define XFER_FINISH_TOUT	2	/* xfer finish timeout */
+#define WMODE_TOUT		2	/* write enable timeout */
+
+#endif
diff --git a/include/asm-arm/arch-spear/spr_syscntl.h b/include/asm-arm/arch-spear/spr_syscntl.h
new file mode 100644
index 0000000..3c92f09
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_syscntl.h
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2009
+ * Ryan CHEN, ST Micoelectronics, ryan.chen@st.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+struct syscntl_regs {
+	u32 scctrl;
+	u32 scsysstat;
+	u32 scimctrl;
+	u32 scimsysstat;
+	u32 scxtalctrl;
+	u32 scpllctrl;
+	u32 scpllfctrl;
+	u32 scperctrl0;
+	u32 scperctrl1;
+	u32 scperen;
+	u32 scperdis;
+	const u32 scperclken;
+	const u32 scperstat;
+};
diff --git a/include/asm-arm/arch-spear/spr_xloader_table.h b/include/asm-arm/arch-spear/spr_xloader_table.h
new file mode 100755
index 0000000..7e3da18
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_xloader_table.h
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPR_XLOADER_TABLE_H
+#define _SPR_XLOADER_TABLE_H
+
+#define XLOADER_TABLE_VERSION_1_1	2
+#define XLOADER_TABLE_VERSION_1_2	3
+
+#define XLOADER_TABLE_ADDRESS		0xD2801FF0
+
+#define DDRMOBILE	1
+#define DDR2		2
+
+#define REV_BA		1
+#define REV_AA		2
+#define REV_AB		3
+
+struct xloader_table_1_1 {
+	unsigned short ddrfreq;
+	unsigned char ddrsize;
+	unsigned char ddrtype;
+
+	unsigned char soc_rev;
+} __attribute__ ((packed));
+
+struct xloader_table_1_2 {
+	unsigned const char *version;
+
+	unsigned short ddrfreq;
+	unsigned char ddrsize;
+	unsigned char ddrtype;
+
+	unsigned char soc_rev;
+} __attribute__ ((packed));
+
+union table_contents {
+	struct xloader_table_1_1 table_1_1;
+	struct xloader_table_1_2 table_1_2;
+};
+
+struct xloader_table {
+	unsigned char table_version;
+	union table_contents table;
+} __attribute__ ((packed));
+
+#endif
diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
index 2898618..3b46327 100644
--- a/include/asm-arm/mach-types.h
+++ b/include/asm-arm/mach-types.h
@@ -2594,6 +2594,33 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_ELTD100              2611
 #define MACH_TYPE_CAPC7117             2612
 #define MACH_TYPE_SWAN                 2613
+#define MACH_TYPE_VEU                  2614
+#define MACH_TYPE_RM2                  2615
+#define MACH_TYPE_TT2100               2616
+#define MACH_TYPE_VENICE               2617
+#define MACH_TYPE_PC7323               2618
+#define MACH_TYPE_MASP                 2619
+#define MACH_TYPE_FUJITSU_TVSTBSOC     2620
+#define MACH_TYPE_FUJITSU_TVSTBSOC1    2621
+#define MACH_TYPE_LEXIKON              2622
+#define MACH_TYPE_MINI2440V2           2623
+#define MACH_TYPE_ICONTROL             2624
+#define MACH_TYPE_SHEEVAD              2625
+#define MACH_TYPE_QSD8X50A_ST1_1       2626
+#define MACH_TYPE_QSD8X50A_ST1_5       2627
+#define MACH_TYPE_BEE                  2628
+#define MACH_TYPE_MX23EVK              2629
+#define MACH_TYPE_AP4EVB               2630
+#define MACH_TYPE_STOCKHOLM            2631
+#define MACH_TYPE_LPC_H3131            2632
+#define MACH_TYPE_STINGRAY             2633
+#define MACH_TYPE_KRAKEN               2634
+#define MACH_TYPE_GW2388               2635
+#define MACH_TYPE_JADECPU              2636
+#define MACH_TYPE_CARLISLE             2637
+#define MACH_TYPE_LUX_SFT9             2638
+#define MACH_TYPE_NEMID_TB             2639
+#define MACH_TYPE_TERRIER              2640
 
 #ifdef CONFIG_ARCH_EBSA110
 # ifdef machine_arch_type
@@ -33579,6 +33606,330 @@ extern unsigned int __machine_arch_type;
 # define machine_is_swan()	(0)
 #endif
 
+#ifdef CONFIG_MACH_VEU
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_VEU
+# endif
+# define machine_is_veu()	(machine_arch_type == MACH_TYPE_VEU)
+#else
+# define machine_is_veu()	(0)
+#endif
+
+#ifdef CONFIG_MACH_RM2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_RM2
+# endif
+# define machine_is_rm2()	(machine_arch_type == MACH_TYPE_RM2)
+#else
+# define machine_is_rm2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TT2100
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TT2100
+# endif
+# define machine_is_tt2100()	(machine_arch_type == MACH_TYPE_TT2100)
+#else
+# define machine_is_tt2100()	(0)
+#endif
+
+#ifdef CONFIG_MACH_VENICE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_VENICE
+# endif
+# define machine_is_venice()	(machine_arch_type == MACH_TYPE_VENICE)
+#else
+# define machine_is_venice()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PC7323
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PC7323
+# endif
+# define machine_is_pc7323()	(machine_arch_type == MACH_TYPE_PC7323)
+#else
+# define machine_is_pc7323()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MASP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MASP
+# endif
+# define machine_is_masp()	(machine_arch_type == MACH_TYPE_MASP)
+#else
+# define machine_is_masp()	(0)
+#endif
+
+#ifdef CONFIG_MACH_FUJITSU_TVSTBSOC
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_FUJITSU_TVSTBSOC
+# endif
+# define machine_is_fujitsu_tvstbsoc0()	(machine_arch_type == MACH_TYPE_FUJITSU_TVSTBSOC)
+#else
+# define machine_is_fujitsu_tvstbsoc0()	(0)
+#endif
+
+#ifdef CONFIG_MACH_FUJITSU_TVSTBSOC1
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_FUJITSU_TVSTBSOC1
+# endif
+# define machine_is_fujitsu_tvstbsoc1()	(machine_arch_type == MACH_TYPE_FUJITSU_TVSTBSOC1)
+#else
+# define machine_is_fujitsu_tvstbsoc1()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LEXIKON
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LEXIKON
+# endif
+# define machine_is_lexikon()	(machine_arch_type == MACH_TYPE_LEXIKON)
+#else
+# define machine_is_lexikon()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MINI2440V2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MINI2440V2
+# endif
+# define machine_is_mini2440v2()	(machine_arch_type == MACH_TYPE_MINI2440V2)
+#else
+# define machine_is_mini2440v2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ICONTROL
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ICONTROL
+# endif
+# define machine_is_icontrol()	(machine_arch_type == MACH_TYPE_ICONTROL)
+#else
+# define machine_is_icontrol()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SHEEVAD
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SHEEVAD
+# endif
+# define machine_is_sheevad()	(machine_arch_type == MACH_TYPE_SHEEVAD)
+#else
+# define machine_is_sheevad()	(0)
+#endif
+
+#ifdef CONFIG_MACH_QSD8X50A_ST1_1
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_QSD8X50A_ST1_1
+# endif
+# define machine_is_qsd8x50a_st1_1()	(machine_arch_type == MACH_TYPE_QSD8X50A_ST1_1)
+#else
+# define machine_is_qsd8x50a_st1_1()	(0)
+#endif
+
+#ifdef CONFIG_MACH_QSD8X50A_ST1_5
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_QSD8X50A_ST1_5
+# endif
+# define machine_is_qsd8x50a_st1_5()	(machine_arch_type == MACH_TYPE_QSD8X50A_ST1_5)
+#else
+# define machine_is_qsd8x50a_st1_5()	(0)
+#endif
+
+#ifdef CONFIG_MACH_BEE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_BEE
+# endif
+# define machine_is_bee()	(machine_arch_type == MACH_TYPE_BEE)
+#else
+# define machine_is_bee()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MX23EVK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MX23EVK
+# endif
+# define machine_is_mx23evk()	(machine_arch_type == MACH_TYPE_MX23EVK)
+#else
+# define machine_is_mx23evk()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AP4EVB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AP4EVB
+# endif
+# define machine_is_ap4evb()	(machine_arch_type == MACH_TYPE_AP4EVB)
+#else
+# define machine_is_ap4evb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_STOCKHOLM
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_STOCKHOLM
+# endif
+# define machine_is_stockholm()	(machine_arch_type == MACH_TYPE_STOCKHOLM)
+#else
+# define machine_is_stockholm()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LPC_H3131
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LPC_H3131
+# endif
+# define machine_is_lpc_h3131()	(machine_arch_type == MACH_TYPE_LPC_H3131)
+#else
+# define machine_is_lpc_h3131()	(0)
+#endif
+
+#ifdef CONFIG_MACH_STINGRAY
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_STINGRAY
+# endif
+# define machine_is_stingray()	(machine_arch_type == MACH_TYPE_STINGRAY)
+#else
+# define machine_is_stingray()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KRAKEN
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KRAKEN
+# endif
+# define machine_is_kraken()	(machine_arch_type == MACH_TYPE_KRAKEN)
+#else
+# define machine_is_kraken()	(0)
+#endif
+
+#ifdef CONFIG_MACH_GW2388
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_GW2388
+# endif
+# define machine_is_gw2388()	(machine_arch_type == MACH_TYPE_GW2388)
+#else
+# define machine_is_gw2388()	(0)
+#endif
+
+#ifdef CONFIG_MACH_JADECPU
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_JADECPU
+# endif
+# define machine_is_jadecpu()	(machine_arch_type == MACH_TYPE_JADECPU)
+#else
+# define machine_is_jadecpu()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CARLISLE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CARLISLE
+# endif
+# define machine_is_carlisle()	(machine_arch_type == MACH_TYPE_CARLISLE)
+#else
+# define machine_is_carlisle()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LUX_SFT9
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LUX_SFT9
+# endif
+# define machine_is_lux_sft9()	(machine_arch_type == MACH_TYPE_LUX_SFT9)
+#else
+# define machine_is_lux_sft9()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NEMID_TB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NEMID_TB
+# endif
+# define machine_is_nemid_tb()	(machine_arch_type == MACH_TYPE_NEMID_TB)
+#else
+# define machine_is_nemid_tb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TERRIER
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TERRIER
+# endif
+# define machine_is_terrier()	(machine_arch_type == MACH_TYPE_TERRIER)
+#else
+# define machine_is_terrier()	(0)
+#endif
+
 /*
  * These have not yet been registered
  */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index ab5cbca..c3255fa 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -48,6 +48,7 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SKIP_RELOCATE_UBOOT
+#define CONFIG_MISC_INIT_R			/* Call misc_init_r */
 
 #define CONFIG_ARCH_CPU_INIT
 
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
new file mode 100644
index 0000000..cc52e39
--- /dev/null
+++ b/include/configs/spear-common.h
@@ -0,0 +1,213 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPEAR_COMMON_H
+#define _SPEAR_COMMON_H
+/*
+ * Common configurations used for both spear3xx as well as spear6xx
+ */
+
+/* USBD driver configuration */
+#define CONFIG_SPEARUDC
+#define CONFIG_USB_DEVICE
+#define CONFIG_USB_TTY
+
+#define CONFIG_USBD_PRODUCT_NAME		"SPEAr SoC"
+#define CONFIG_USBD_MANUFACTURER		"ST Microelectronics"
+
+#define CONFIG_EXTRA_ENV_USBTTY			"usbtty=cdc_acm\0"
+
+/* I2C driver configuration */
+#define CONFIG_HARD_I2C
+#define CONFIG_SPEAR_I2C
+#define CONFIG_SYS_I2C_SPEED			400000
+#define CONFIG_SYS_I2C_SLAVE			0x02
+
+#define CONFIG_I2C_CHIPADDRESS			0x50
+
+/* Timer, HZ specific defines */
+#define CONFIG_SYS_HZ				(1000)
+#define CONFIG_SYS_HZ_CLOCK			(8300000)
+
+/* Flash configuration */
+#if defined(CONFIG_FLASH_PNOR)
+#define CONFIG_SPEAR_EMI			1
+#else
+#define CONFIG_SPEARSMI				1
+#endif
+
+#if defined(CONFIG_SPEARSMI)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS		2
+#define CONFIG_SYS_FLASH_BASE			(0xF8000000)
+#define CONFIG_SYS_CS1_FLASH_BASE		(0xF9000000)
+#define CONFIG_SYS_FLASH_BANK_SIZE		(0x01000000)
+#define CONFIG_SYS_FLASH_ADDR_BASE		{CONFIG_SYS_FLASH_BASE, \
+						CONFIG_SYS_CS1_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_SECT		128
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO		1
+#define CONFIG_SYS_FLASH_ERASE_TOUT		(3 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT		(3 * CONFIG_SYS_HZ)
+
+#endif
+
+/*
+ * Serial Configuration (PL011)
+ * CONFIG_PL01x_PORTS is defined in specific files
+ */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
+#define CONFIG_CONS_INDEX			0
+#define CONFIG_BAUDRATE				115200
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
+						57600, 115200 }
+
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
+
+/* NAND FLASH Configuration */
+#define CONFIG_NAND_SPEAR			1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_MTD_NAND_VERIFY_WRITE		1
+
+/*
+ * Command support defines
+ */
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/*
+ * Default Environment Varible definitions
+ */
+#if defined(CONFIG_SPEAR_USBTTY)
+#define CONFIG_BOOTDELAY			-1
+#else
+#define CONFIG_BOOTDELAY			1
+#endif
+
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * U-Boot Environment placing definitions.
+ */
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+#ifdef CONFIG_SPEARSMI
+/*
+ * Environment is in serial NOR flash
+ */
+#define CONFIG_SYS_MONITOR_LEN			0x00040000
+#define CONFIG_ENV_SECT_SIZE			0x00010000
+#define CONFIG_FSMTDBLK				"/dev/mtdblock8 "
+
+#define CONFIG_BOOTCOMMAND			"bootm 0xf8050000"
+
+#elif defined(CONFIG_SPEAR_EMI)
+/*
+ * Environment is in parallel NOR flash
+ */
+#define CONFIG_SYS_MONITOR_LEN			0x00060000
+#define CONFIG_ENV_SECT_SIZE			0x00020000
+#define CONFIG_FSMTDBLK				"/dev/mtdblock3 "
+
+#define CONFIG_BOOTCOMMAND			"cp.b 0x50080000 0x1600000 " \
+						"0x4C0000; bootm 0x1600000"
+#endif
+
+#define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_FLASH_BASE
+#define CONFIG_ENV_ADDR				(CONFIG_SYS_MONITOR_BASE + \
+						CONFIG_SYS_MONITOR_LEN)
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+/*
+ * Environment is in NAND
+ */
+
+#define CONFIG_ENV_OFFSET			0x60000
+#define CONFIG_ENV_RANGE			0x10000
+#define CONFIG_FSMTDBLK				"/dev/mtdblock12 "
+
+#define CONFIG_BOOTCOMMAND			"nand read.jffs2 0x1600000 " \
+						"0x80000 0x4C0000; " \
+						"bootm 0x1600000"
+#endif
+
+#define CONFIG_BOOTARGS_NFS			"root=/dev/nfs ip=dhcp " \
+						"console=ttyS0 init=/bin/sh"
+#define CONFIG_BOOTARGS				"console=ttyS0 mem=128M "  \
+						"root="CONFIG_FSMTDBLK \
+						"rootfstype=jffs2"
+
+#define CONFIG_ENV_SIZE				0x02000
+
+/* Miscellaneous configurable options */
+#define CONFIG_BOOT_PARAMS_ADDR			0x00000100
+#define CONFIG_CMDLINE_TAG			1
+#define CONFIG_SETUP_MEMORY_TAGS		1
+#define CONFIG_MISC_INIT_R			1
+#define CONFIG_ZERO_BOOTDELAY_CHECK		1
+#define CONFIG_AUTOBOOT_KEYED			1
+#define CONFIG_AUTOBOOT_STOP_STR		" "
+#define CONFIG_AUTOBOOT_PROMPT			\
+		"Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
+
+#define CONFIG_SYS_MEMTEST_START		0x00800000
+#define CONFIG_SYS_MEMTEST_END			0x04000000
+#define CONFIG_SYS_MALLOC_LEN			(1024*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE		128
+#define CONFIG_IDENT_STRING			"-SPEAr"
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT			"u-boot> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
+						sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LOAD_ADDR			0x00800000
+#define CONFIG_SYS_CONSOLE_INFO_QUIET		1
+#define CONFIG_SYS_64BIT_VSPRINTF		1
+
+#define CONFIG_EXTRA_ENV_SETTINGS		CONFIG_EXTRA_ENV_USBTTY
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE			(128*1024)
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ			(4*1024)
+#define CONFIG_STACKSIZE_FIQ			(4*1024)
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS			1
+#define PHYS_SDRAM_1				0x00000000
+#define PHYS_SDRAM_1_MAXSIZE			0x40000000
+
+#endif
diff --git a/include/configs/spear3xx.h b/include/configs/spear3xx.h
new file mode 100755
index 0000000..0248aba
--- /dev/null
+++ b/include/configs/spear3xx.h
@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#if defined(CONFIG_MK_spear300)
+#define CONFIG_SPEAR3XX				1
+#define CONFIG_SPEAR300				1
+#elif defined(CONFIG_MK_spear310)
+#define CONFIG_SPEAR3XX				1
+#define CONFIG_SPEAR310				1
+#elif defined(CONFIG_MK_spear320)
+#define CONFIG_SPEAR3XX				1
+#define CONFIG_SPEAR320				1
+#endif
+
+#include <configs/spear-common.h>
+
+/* Serial Configuration (PL011) */
+#define CONFIG_SYS_SERIAL0			0xD0000000
+
+#if defined(CONFIG_SPEAR300)
+#define CONFIG_PL01x_PORTS			{(void *)CONFIG_SYS_SERIAL0}
+
+#elif defined(CONFIG_SPEAR310)
+
+#if (CONFIG_CONS_INDEX)
+#undef  CONFIG_PL011_CLOCK
+#define CONFIG_PL011_CLOCK			(83 * 1000 * 1000)
+#endif
+
+#define CONFIG_SYS_SERIAL1			0xB2000000
+#define CONFIG_SYS_SERIAL2			0xB2080000
+#define CONFIG_SYS_SERIAL3			0xB2100000
+#define CONFIG_SYS_SERIAL4			0xB2180000
+#define CONFIG_SYS_SERIAL5			0xB2200000
+#define CONFIG_PL01x_PORTS			{(void *)CONFIG_SYS_SERIAL0, \
+						(void *)CONFIG_SYS_SERIAL1, \
+						(void *)CONFIG_SYS_SERIAL2, \
+						(void *)CONFIG_SYS_SERIAL3, \
+						(void *)CONFIG_SYS_SERIAL4, \
+						(void *)CONFIG_SYS_SERIAL5 }
+#elif defined(CONFIG_SPEAR320)
+
+#if (CONFIG_CONS_INDEX)
+#undef  CONFIG_PL011_CLOCK
+#define CONFIG_PL011_CLOCK			(83 * 1000 * 1000)
+#endif
+
+#define CONFIG_SYS_SERIAL1			0xA3000000
+#define CONFIG_SYS_SERIAL2			0xA4000000
+#define CONFIG_PL01x_PORTS			{(void *)CONFIG_SYS_SERIAL0, \
+						(void *)CONFIG_SYS_SERIAL1, \
+						(void *)CONFIG_SYS_SERIAL2 }
+#endif
+
+#if defined(CONFIG_SPEAR_EMI)
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+
+#if defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_FLASH_BASE			0x50000000
+#define CONFIG_SYS_CS1_FLASH_BASE		0x60000000
+#define CONFIG_SYS_CS2_FLASH_BASE		0x70000000
+#define CONFIG_SYS_CS3_FLASH_BASE		0x80000000
+#define CONFIG_SYS_CS4_FLASH_BASE		0x90000000
+#define CONFIG_SYS_CS5_FLASH_BASE		0xA0000000
+#define CONFIG_SYS_FLASH_BANKS_LIST		{ CONFIG_SYS_FLASH_BASE,   \
+						CONFIG_SYS_CS1_FLASH_BASE, \
+						CONFIG_SYS_CS2_FLASH_BASE, \
+						CONFIG_SYS_CS3_FLASH_BASE, \
+						CONFIG_SYS_CS4_FLASH_BASE, \
+						CONFIG_SYS_CS5_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_BANKS		6
+
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_FLASH_BASE			0x44000000
+#define CONFIG_SYS_CS1_FLASH_BASE		0x45000000
+#define CONFIG_SYS_CS2_FLASH_BASE		0x46000000
+#define CONFIG_SYS_CS3_FLASH_BASE		0x47000000
+#define CONFIG_SYS_FLASH_BANKS_LIST		{ CONFIG_SYS_FLASH_BASE,   \
+						CONFIG_SYS_CS1_FLASH_BASE, \
+						CONFIG_SYS_CS2_FLASH_BASE, \
+						CONFIG_SYS_CS3_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_BANKS		4
+
+#endif
+
+#define CONFIG_SYS_MAX_FLASH_SECT		(127 + 8)
+#define CONFIG_SYS_FLASH_QUIET_TEST		1
+
+#endif
+
+#if defined(CONFIG_SPEAR300)
+#define CONFIG_SYS_NAND_BASE			(0x80000000)
+
+#elif defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_NAND_BASE			(0x40000000)
+
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_NAND_BASE			(0x50000000)
+
+#endif
+
+#endif  /* __CONFIG_H */
diff --git a/include/configs/spear6xx.h b/include/configs/spear6xx.h
new file mode 100755
index 0000000..2ad5beb
--- /dev/null
+++ b/include/configs/spear6xx.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SPEAR600				1
+
+#include <configs/spear-common.h>
+
+/* Serial Configuration (PL011) */
+#define CONFIG_SYS_SERIAL0			0xD0000000
+#define CONFIG_SYS_SERIAL1			0xD0080000
+#define CONFIG_PL01x_PORTS			{ (void *)CONFIG_SYS_SERIAL0, \
+						(void *)CONFIG_SYS_SERIAL1 }
+
+#define CONFIG_SYS_NAND_BASE			(0xD2000000)
+
+#endif  /* __CONFIG_H */
diff --git a/include/usb/spr_udc.h b/include/usb/spr_udc.h
new file mode 100755
index 0000000..2c332d5
--- /dev/null
+++ b/include/usb/spr_udc.h
@@ -0,0 +1,230 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SPR_UDC_H
+#define __SPR_UDC_H
+
+/*
+ * Defines for  USBD
+ *
+ * The udc_ahb controller has three AHB slaves:
+ *
+ * 1.  THe UDC registers
+ * 2.  The plug detect
+ * 3.  The RX/TX FIFO
+ */
+
+#define MAX_ENDPOINTS		16
+
+struct udc_endp_regs {
+	u32 endp_cntl;
+	u32 endp_status;
+	u32 endp_bsorfn;
+	u32 endp_maxpacksize;
+	u32 reserved_1;
+	u32 endp_desc_point;
+	u32 reserved_2;
+	u32 write_done;
+};
+
+/* Endpoint Control Register definitions */
+
+#define  ENDP_CNTL_STALL		0x00000001
+#define  ENDP_CNTL_FLUSH		0x00000002
+#define  ENDP_CNTL_SNOOP		0x00000004
+#define  ENDP_CNTL_POLL			0x00000008
+#define  ENDP_CNTL_CONTROL		0x00000000
+#define  ENDP_CNTL_ISO			0x00000010
+#define  ENDP_CNTL_BULK			0x00000020
+#define  ENDP_CNTL_INT			0x00000030
+#define  ENDP_CNTL_NAK			0x00000040
+#define  ENDP_CNTL_SNAK			0x00000080
+#define  ENDP_CNTL_CNAK			0x00000100
+#define  ENDP_CNTL_RRDY			0x00000200
+
+/* Endpoint Satus Register definitions */
+
+#define  ENDP_STATUS_PIDMSK		0x0000000f
+#define  ENDP_STATUS_OUTMSK		0x00000030
+#define  ENDP_STATUS_OUT_NONE		0x00000000
+#define  ENDP_STATUS_OUT_DATA		0x00000010
+#define  ENDP_STATUS_OUT_SETUP		0x00000020
+#define  ENDP_STATUS_IN			0x00000040
+#define  ENDP_STATUS_BUFFNAV		0x00000080
+#define  ENDP_STATUS_FATERR		0x00000100
+#define  ENDP_STATUS_HOSTBUSERR		0x00000200
+#define  ENDP_STATUS_TDC		0x00000400
+#define  ENDP_STATUS_RXPKTMSK		0x003ff800
+
+struct udc_regs {
+	struct udc_endp_regs in_regs[MAX_ENDPOINTS];
+	struct udc_endp_regs out_regs[MAX_ENDPOINTS];
+	u32 dev_conf;
+	u32 dev_cntl;
+	u32 dev_stat;
+	u32 dev_int;
+	u32 dev_int_mask;
+	u32 endp_int;
+	u32 endp_int_mask;
+	u32 reserved_3[0x39];
+	u32 reserved_4;		/* offset 0x500 */
+	u32 udc_endp_reg[MAX_ENDPOINTS];
+};
+
+/* Device Configuration Register definitions */
+
+#define  DEV_CONF_HS_SPEED		0x00000000
+#define  DEV_CONF_LS_SPEED		0x00000002
+#define  DEV_CONF_FS_SPEED		0x00000003
+#define  DEV_CONF_REMWAKEUP		0x00000004
+#define  DEV_CONF_SELFPOW		0x00000008
+#define  DEV_CONF_SYNCFRAME		0x00000010
+#define  DEV_CONF_PHYINT_8		0x00000020
+#define  DEV_CONF_PHYINT_16		0x00000000
+#define  DEV_CONF_UTMI_BIDIR		0x00000040
+#define  DEV_CONF_STATUS_STALL		0x00000080
+
+/* Device Control Register definitions */
+
+#define  DEV_CNTL_RESUME		0x00000001
+#define  DEV_CNTL_TFFLUSH		0x00000002
+#define  DEV_CNTL_RXDMAEN		0x00000004
+#define  DEV_CNTL_TXDMAEN		0x00000008
+#define  DEV_CNTL_DESCRUPD		0x00000010
+#define  DEV_CNTL_BIGEND		0x00000020
+#define  DEV_CNTL_BUFFILL		0x00000040
+#define  DEV_CNTL_TSHLDEN		0x00000080
+#define  DEV_CNTL_BURSTEN		0x00000100
+#define  DEV_CNTL_DMAMODE		0x00000200
+#define  DEV_CNTL_SOFTDISCONNECT	0x00000400
+#define  DEV_CNTL_SCALEDOWN		0x00000800
+#define  DEV_CNTL_BURSTLENU		0x00010000
+#define  DEV_CNTL_BURSTLENMSK		0x00ff0000
+#define  DEV_CNTL_TSHLDLENU		0x01000000
+#define  DEV_CNTL_TSHLDLENMSK		0xff000000
+
+/* Device Status Register definitions */
+
+#define  DEV_STAT_CFG			0x0000000f
+#define  DEV_STAT_INTF			0x000000f0
+#define  DEV_STAT_ALT			0x00000f00
+#define  DEV_STAT_SUSP			0x00001000
+#define  DEV_STAT_ENUM			0x00006000
+#define  DEV_STAT_ENUM_SPEED_HS		0x00000000
+#define  DEV_STAT_ENUM_SPEED_FS		0x00002000
+#define  DEV_STAT_ENUM_SPEED_LS		0x00004000
+#define  DEV_STAT_RXFIFO_EMPTY		0x00008000
+#define  DEV_STAT_PHY_ERR		0x00010000
+#define  DEV_STAT_TS			0xf0000000
+
+/* Device Interrupt Register definitions */
+
+#define  DEV_INT_MSK			0x0000007f
+#define  DEV_INT_SETCFG			0x00000001
+#define  DEV_INT_SETINTF		0x00000002
+#define  DEV_INT_INACTIVE		0x00000004
+#define  DEV_INT_USBRESET		0x00000008
+#define  DEV_INT_SUSPUSB		0x00000010
+#define  DEV_INT_SOF			0x00000020
+#define  DEV_INT_ENUM			0x00000040
+
+/* Endpoint Interrupt Register definitions */
+
+#define  ENDP0_INT_CTRLIN		0x00000001
+#define  ENDP1_INT_BULKIN		0x00000002
+#define  ENDP_INT_NONISOIN_MSK		0x0000AAAA
+#define  ENDP2_INT_BULKIN		0x00000004
+#define  ENDP0_INT_CTRLOUT		0x00010000
+#define  ENDP1_INT_BULKOUT		0x00020000
+#define  ENDP2_INT_BULKOUT		0x00040000
+#define  ENDP_INT_NONISOOUT_MSK		0x55540000
+
+/* Endpoint Register definitions */
+#define  ENDP_EPDIR_OUT			0x00000000
+#define  ENDP_EPDIR_IN			0x00000010
+#define  ENDP_EPTYPE_CNTL		0x0
+#define  ENDP_EPTYPE_ISO		0x1
+#define  ENDP_EPTYPE_BULK		0x2
+#define  ENDP_EPTYPE_INT		0x3
+
+/*
+ * Defines for Plug Detect
+ */
+
+struct plug_regs {
+	u32 plug_state;
+	u32 plug_pending;
+};
+
+/* Plug State Register definitions */
+#define  PLUG_STATUS_EN			0x1
+#define  PLUG_STATUS_ATTACHED		0x2
+#define  PLUG_STATUS_PHY_RESET		0x4
+#define  PLUG_STATUS_PHY_MODE		0x8
+
+/*
+ * Defines for UDC FIFO (Slave Mode)
+ */
+struct udcfifo_regs {
+	u32 *fifo_p;
+};
+
+/*
+ * USBTTY definitions
+ */
+#define  EP0_MAX_PACKET_SIZE		64
+#define  UDC_INT_ENDPOINT		1
+#define  UDC_INT_PACKET_SIZE		64
+#define  UDC_OUT_ENDPOINT		2
+#define  UDC_BULK_PACKET_SIZE		64
+#define  UDC_IN_ENDPOINT		3
+#define  UDC_OUT_PACKET_SIZE		64
+#define  UDC_IN_PACKET_SIZE		64
+
+/*
+ * UDC endpoint definitions
+ */
+#define  UDC_EP0			0
+#define  UDC_EP1			1
+#define  UDC_EP2			2
+#define  UDC_EP3			3
+
+/*
+ * Function declarations
+ */
+
+void udc_irq(void);
+
+void udc_set_nak(int epid);
+void udc_unset_nak(int epid);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+int udc_init(void);
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+void udc_connect(void);
+void udc_disconnect(void);
+void udc_startup_events(struct usb_device_instance *device);
+void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
+		  struct usb_endpoint_instance *endpoint);
+
+#endif /* __SPR_UDC_H */